HH3C-MPLS-VPN-BGP-MIB

All MIBs › HH3C-MPLS-VPN-BGP-MIB

Organization: New H3C Technologies Co., Ltd.

Last Updated: 2016-10-26

Category: MPLS and Traffic Engineering, Protocol: BGP, Vendor: H3C/HH3C

Description: Manages MPLS BGP VPN routing instances, route distinguishers, and import/export policies on H3C PE routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-MPLS-VPN-BGP-MIB?

HH3C-MPLS-VPN-BGP-MIB is a New H3C Technologies proprietary MIB (based on the IETF MPLS/BGP VPN architecture draft) configuring per-VRF BGP/MPLS Layer-3 VPN parameters. Its VRF-configuration table, keyed by name, records route distinguisher, network-prefix type/prefix, connected/static/RIP redistribution flags, high-route threshold, warn-only flag, max routes, and row status, while a BGP-neighbor-address table records neighbor address, role, AS number, admin status, row status, and state, alongside a neighbor-prefix table. As a configuration/status MIB it lets an administrator confirm a VRF's route-target/redistribution policy and BGP neighbor session state on an H3C PE router. It is deployed on New H3C Technologies MPLS/BGP VPN PE routers. Engineers can download the HH3C-MPLS-VPN-BGP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-MPLS-VPN-BGP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

New H3C Technologies MPLS/BGP VPN PE routers

Monitoring Examples

An administrator checks hh3cMplsVpnVrfBgpNbrState and hh3cMplsVpnVrfConfMaxRts to confirm BGP VPN neighbor session state and route-count capacity on an H3C PE router.

What Can Be Monitored

VRF BGP neighbor session state and route-count capacity

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddressType

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cMplsVpnBgp	1.3.6.1.4.1.25506.2.160			This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft , August 1999.
hh3cMplsVpnObjects	1.3.6.1.4.1.25506.2.160.1
hh3cMplsVpnConf	1.3.6.1.4.1.25506.2.160.1.1
hh3cMplsVpnVrfConfTable	1.3.6.1.4.1.25506.2.160.1.1.1		not-accessible	This table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The collection of all VRF instances comprises an actual VPN.
hh3cMplsVpnVrfConfEntry	1.3.6.1.4.1.25506.2.160.1.1.1.1		not-accessible	An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
HH3 hh3cMplsVpnVrfName	1.3.6.1.4.1.25506.2.160.1.1.1.1.1	Hh3cMplsVpnId	not-accessible	The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID.
HH3 hh3cMplsVpnVrfRtDistinguisher	1.3.6.1.4.1.25506.2.160.1.1.1.1.2	Hh3cMplsVpnRtDistinguisher	read-create	The route distinguisher for this VRF.
INT hh3cMplsVpnVrfNetPrefixType	1.3.6.1.4.1.25506.2.160.1.1.1.1.3	INTEGER	read-only	Denotes the type of the network prefix in use for the PE-CE connections.
IP hh3cMplsVpnVrfNetPrefix	1.3.6.1.4.1.25506.2.160.1.1.1.1.4	IpAddress	read-only	Denotes the network prefix for the PE-CE connections.
T/F hh3cMplsVpnVrfIpRtRedistributeConn	1.3.6.1.4.1.25506.2.160.1.1.1.1.5	TruthValue	read-create	Denotes the redistribution of directly connected networks into the VRF BGP table.
T/F hh3cMplsVpnVrfIpRtRedistributeStatic	1.3.6.1.4.1.25506.2.160.1.1.1.1.6	TruthValue	read-create	Denotes the redistribution of static routes into the VRF BGP table.
T/F hh3cMplsVpnVrfIpRtRedistributeRip	1.3.6.1.4.1.25506.2.160.1.1.1.1.7	TruthValue	read-create	Denotes the redistribution of RIP routes into the VRF BGP table.
U32 hh3cMplsVpnVrfConfHighRtThreshold	1.3.6.1.4.1.25506.2.160.1.1.1.1.8	Unsigned32	read-create	Denotes high-level water marker for the number of routes which this VRF may hold.
T/F hh3cMplsVpnVrfConfIsWarnOnly	1.3.6.1.4.1.25506.2.160.1.1.1.1.9	TruthValue	read-create	Denotes the action when the amount of VPN's routes exceed the hh3cMplsVpnVrfConfHighRtThreshold.
U32 hh3cMplsVpnVrfConfMaxRts	1.3.6.1.4.1.25506.2.160.1.1.1.1.10	Unsigned32	read-create	Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to hh3cMplsVrfMaxPossibleRts unless it is set to 0.
ROW hh3cMplsVpnVrfConfRowStatus	1.3.6.1.4.1.25506.2.160.1.1.1.1.11	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
hh3cMplsVpnVrfBgpNbrAddrTable	1.3.6.1.4.1.25506.2.160.1.1.2		not-accessible	This table specifies per-interface MPLS/BGP neighbor addresses for both PEs and CEs.
hh3cMplsVpnVrfBgpNbrAddrEntry	1.3.6.1.4.1.25506.2.160.1.1.2.1		not-accessible	An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
IP hh3cMplsVpnVrfBgpNbrAddr	1.3.6.1.4.1.25506.2.160.1.1.2.1.1	IpAddress	not-accessible	Denotes the BGP neighbor address.
INT hh3cMplsVpnVrfBgpNbrRole	1.3.6.1.4.1.25506.2.160.1.1.2.1.2	INTEGER	read-create	Denotes the role played by this BGP neighbor with respect to this VRF.
U32 hh3cMplsVpnVrfBgpNbrAsNumber	1.3.6.1.4.1.25506.2.160.1.1.2.1.3	Unsigned32	read-create	The Autonomous System that the BGP's neighbour in.
INT hh3cMplsVpnVrfBgpNbrAdminStatus	1.3.6.1.4.1.25506.2.160.1.1.2.1.4	INTEGER	read-create	The action set by SNMP client.
ROW hh3cMplsVpnVrfBgpNbrRowStatus	1.3.6.1.4.1.25506.2.160.1.1.2.1.5	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
INT hh3cMplsVpnVrfBgpNbrState	1.3.6.1.4.1.25506.2.160.1.1.2.1.6	INTEGER	read-only	The BGP neighbor connection state.
hh3cMplsVpnVrfBgpNbrPrefixTable	1.3.6.1.4.1.25506.2.160.1.1.3		not-accessible	This table specifies per-VRF vpnv4 multi-protocol prefixes supported by BGP.
hh3cMplsVpnVrfBgpNbrPrefixEntry	1.3.6.1.4.1.25506.2.160.1.1.3.1		not-accessible	An entry in this table is created by an LSR for every BGP prefix associated with a VRF supporting a MPLS/BGP VPN. The indexing provides an ordering of BGP prefixes per VRF.
IP hh3cMplsVpnVrfBgpPAtrPeer	1.3.6.1.4.1.25506.2.160.1.1.3.1.1	IpAddress	not-accessible	The IP address of the peer where the path information was learned.
I32 hh3cMplsVpnVrfBgpPAtrIpAddrPrefixLen	1.3.6.1.4.1.25506.2.160.1.1.3.1.2	Integer32	not-accessible	Length in bits of the IP address prefix in the Network Layer Reachability Information field.
IP hh3cMplsVpnVrfBgpPAtrIpAddrPrefix	1.3.6.1.4.1.25506.2.160.1.1.3.1.3	IpAddress	not-accessible	An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by mplsVpnVrfBgpPAtrIpAddrPrefixLen. Any bits beyond the length specified by MplsVpnVrfBgpPAtrIpAddrPrefixLen are zeroed.
IPt hh3cMplsVpnVrfBgpPAtrPeerType	1.3.6.1.4.1.25506.2.160.1.1.3.1.4	InetAddressType	read-only	Address type of the mplsVpnVrfBgpPAtrPeer object.
INT hh3cMplsVpnVrfBgpPAtrOrigin	1.3.6.1.4.1.25506.2.160.1.1.3.1.5	INTEGER	read-only	The ultimate origin of the path information.
OCT hh3cMplsVpnVrfBgpPAtrASPathSegment	1.3.6.1.4.1.25506.2.160.1.1.3.1.6	OCTET STRING	read-only	The sequence of AS path segments. Each AS path segment is represented by a triple . The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255;
IP hh3cMplsVpnVrfBgpPAtrNextHop	1.3.6.1.4.1.25506.2.160.1.1.3.1.7	IpAddress	read-only	The address of the border router that should be used for the destination network.
I32 hh3cMplsVpnVrfBgpPAtrMultiExitDisc	1.3.6.1.4.1.25506.2.160.1.1.3.1.8	Integer32	read-only	This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute.
I32 hh3cMplsVpnVrfBgpPAtrLocalPref	1.3.6.1.4.1.25506.2.160.1.1.3.1.9	Integer32	read-only	The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute.
INT hh3cMplsVpnVrfBgpPAtrAtomicAggregate	1.3.6.1.4.1.25506.2.160.1.1.3.1.10	INTEGER	read-only	If the ATOMIC_AGGREGATE attribute is present in the Path Attributes then this object MUST have a value of 'lessSpecificRouteNotSelected'. If the ATOMIC_AGGREGATE attribute is missing in the Path Attributes then this object MUST have a value of 'lessSpecificRouteSelected'. Note that ATOMIC_AGGREGATE is now a primarily informational attribute.
I32 hh3cMplsVpnVrfBgpPAtrAggregatorAS	1.3.6.1.4.1.25506.2.160.1.1.3.1.11	Integer32	read-only	The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.
IP hh3cMplsVpnVrfBgpPAtrAggregatorAddr	1.3.6.1.4.1.25506.2.160.1.1.3.1.12	IpAddress	read-only	The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
I32 hh3cMplsVpnVrfBgpPAtrCalcLocalPref	1.3.6.1.4.1.25506.2.160.1.1.3.1.13	Integer32	read-only	The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute.
T/F hh3cMplsVpnVrfBgpPAtrBest	1.3.6.1.4.1.25506.2.160.1.1.3.1.14	TruthValue	read-only	An indication of whether or not this route was chosen as the best BGP4 route.
OCT hh3cMplsVpnVrfBgpPAtrUnknown	1.3.6.1.4.1.25506.2.160.1.1.3.1.15	OCTET STRING	read-only	One or more path attributes not understood by this BGP4 speaker. A zero-length string indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object.

RFC description

Manages MPLS/BGP Virtual Private Networks on H3C devices, supporting VPN configuration and Border Gateway Protocol attributes.

Start monitoring H3C MPLS/BGP VPN provider-edge router (VRF/BGP neighbor config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-MPLS-VPN-BGP-MIB

What Is HH3C-MPLS-VPN-BGP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description