All MIBs › HH3C-LswINF-MIB
Organization: Hangzhou H3C Tech. Co., Ltd.
Last Updated: 2001-06-29
Category: Technology: Switching/L2, Vendor: H3C/HH3C
Description: Manages Layer 2 interface operational states, speed/duplex, and counters on H3C switch ports.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HH3C-LswINF-MIB?
HH3C-LswINF-MIB is an H3C proprietary MIB (extending the standard ifTable, 'Lsw' for LAN Switch) reporting extended per-port interface attributes on H3C switches. Its table records whether a port is unbound, its physical port index, aggregate-port membership, mirror-port role, VLAN type, multicast/flow-control/source-MAC control, a clear-statistics action, base/device port index, and packet-per-second broadcast/multicast/unicast storm-suppression thresholds and steps, alongside a combo-port active-port selector. As a configuration MIB it lets an administrator confirm a port's storm-suppression thresholds and combo-port selection. It is deployed on H3C managed switches. Engineers can download the HH3C-LswINF-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-LswINF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C managed switches
Monitoring Examples
An administrator checks hh3cifPpsMulSuppression to confirm multicast storm-suppression is tuned appropriately on a port experiencing broadcast-storm-related instability on an H3C switch.
What Can Be Monitored
- per-port storm-suppression thresholds and combo-port configuration
This MIB depends on
Related MIBs
Imported Objects
From HH3C-OID-MIB
| hh3clswCommon | OBJECT-IDENTITY |
From RFC1213-MIB
| ifEntry | |
| ifIndex |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using hh3cifOutPayloadOctets OID:
Select an H3C managed switch (extended per-port interface attributes/storm suppression) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cifOutPayloadOctets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The actual output octets of the interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hh3cLswExtInterface | 1.3.6.1.4.1.25506.8.35.1 | |||
| hh3cifXXTable | 1.3.6.1.4.1.25506.8.35.1.1 | not-accessible | Extended H3C private interface information table. | |
| hh3cifXXEntry | 1.3.6.1.4.1.25506.8.35.1.1.1 | not-accessible | Entries of extended H3C private interface information table. | |
| T/F hh3cifUnBoundPort | 1.3.6.1.4.1.25506.8.35.1.1.1.1 | TruthValue | read-only | Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.) |
| T/F hh3cifISPhyPort | 1.3.6.1.4.1.25506.8.35.1.1.1.2 | TruthValue | read-only | Whether it is a physical interface. |
| T/F hh3cifAggregatePort | 1.3.6.1.4.1.25506.8.35.1.1.1.3 | TruthValue | read-only | Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.) |
| T/F hh3cifMirrorPort | 1.3.6.1.4.1.25506.8.35.1.1.1.4 | TruthValue | read-write | Whether it is a mirror port. |
| INT hh3cifVLANType | 1.3.6.1.4.1.25506.8.35.1.1.1.5 | INTEGER | read-write | port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port. |
| INT hh3cifMcastControl | 1.3.6.1.4.1.25506.8.35.1.1.1.6 | INTEGER | read-write | Broadcast storm suppression with the step length of 1, ranging from 1 to 100 percent. In some products the step is 5, ranging from 5 to 100. |
| T/F hh3cifFlowControl | 1.3.6.1.4.1.25506.8.35.1.1.1.7 | TruthValue | read-write | Flow control status. |
| T/F hh3cifSrcMacControl | 1.3.6.1.4.1.25506.8.35.1.1.1.8 | TruthValue | read-only | Whether to filter by source MAC address. |
| INT hh3cifClearStat | 1.3.6.1.4.1.25506.8.35.1.1.1.9 | INTEGER | read-write | Clear all port statistics. Read operation not supported. |
| INT hh3cifXXBasePortIndex | 1.3.6.1.4.1.25506.8.35.1.1.1.10 | INTEGER | read-only | Index number of the port and the first port index of the device is 1. |
| INT hh3cifXXDevPortIndex | 1.3.6.1.4.1.25506.8.35.1.1.1.11 | INTEGER | read-only | Device index of the port. |
| I32 hh3cifPpsMcastControl | 1.3.6.1.4.1.25506.8.35.1.1.1.12 | Integer32 | read-write | The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product. |
| INT hh3cifPpsBcastDisValControl | 1.3.6.1.4.1.25506.8.35.1.1.1.13 | INTEGER | read-write | Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast. |
| I32 hh3cifUniSuppressionStep | 1.3.6.1.4.1.25506.8.35.1.1.1.14 | Integer32 | read-only | The step of unicast suppression in ratio mode. |
| I32 hh3cifPpsUniSuppressionMax | 1.3.6.1.4.1.25506.8.35.1.1.1.15 | Integer32 | read-only | The max pps(packet per second) value of unicast suppression in pps mode. |
| I32 hh3cifMulSuppressionStep | 1.3.6.1.4.1.25506.8.35.1.1.1.16 | Integer32 | read-only | The step of multicast suppression in ratio mode. |
| I32 hh3cifPpsMulSuppressionMax | 1.3.6.1.4.1.25506.8.35.1.1.1.17 | Integer32 | read-only | The max pps(packet per second) value of multicast suppression in pps mode. |
| I32 hh3cifUniSuppression | 1.3.6.1.4.1.25506.8.35.1.1.1.18 | Integer32 | read-write | The unicast suppression with the ranging from 1 to 100 percent in ratio mode. The step is determined by hh3cifUniSuppressionStep. |
| I32 hh3cifPpsUniSuppression | 1.3.6.1.4.1.25506.8.35.1.1.1.19 | Integer32 | read-write | The unicast suppression in pps(packet per second) mode. The max value is determined by hh3cifPpsUniSuppressionMax. |
| I32 hh3cifMulSuppression | 1.3.6.1.4.1.25506.8.35.1.1.1.20 | Integer32 | read-write | The multicast suppression with ranging from 1 to 100 percent in ratio mode. The step is determined by hh3cifMulSuppressionStep. |
| I32 hh3cifPpsMulSuppression | 1.3.6.1.4.1.25506.8.35.1.1.1.21 | Integer32 | read-write | The multicast suppression in pps(packet per second) mode. The max pps value is determined by hh3cifPpsMulSuppressionMax. |
| INT hh3cifComboActivePort | 1.3.6.1.4.1.25506.8.35.1.1.1.22 | INTEGER | read-write | Active port on combo interface. |
| I32 hh3cifBMbpsMulSuppressionMax | 1.3.6.1.4.1.25506.8.35.1.1.1.23 | Integer32 | read-only | The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured. |
| I32 hh3cifBMbpsMulSuppression | 1.3.6.1.4.1.25506.8.35.1.1.1.24 | Integer32 | read-write | With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hh3cifBMbpsMulSuppressionMax in the entry. The default value of hh3cifBMbpsMulSuppression is the value of hh3cifBMbpsMulSuppressionMax. |
| I32 hh3cifBKbpsMulSuppressionMax | 1.3.6.1.4.1.25506.8.35.1.1.1.25 | Integer32 | read-only | The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured. |
| I32 hh3cifBKbpsMulSuppressionStep | 1.3.6.1.4.1.25506.8.35.1.1.1.26 | Integer32 | read-only | The step of multicast suppression with bandwidth-based(Kbps). |
| I32 hh3cifBKbpsMulSuppression | 1.3.6.1.4.1.25506.8.35.1.1.1.27 | Integer32 | read-write | With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hh3cifBKbpsMulSuppressionMax in the entry. The value of hh3cifBKbpsMulSuppression must be multiple of the value of hh3cifBKbpsMulSuppressionStep. The default value of hh3cifBKbpsMulSuppression is the value of hh3cifBKbpsMulSuppressionMax. |
| DRO hh3cifUnknownPacketDropMul | 1.3.6.1.4.1.25506.8.35.1.1.1.28 | DropDirection | read-write | Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions. |
| DRO hh3cifUnknownPacketDropUni | 1.3.6.1.4.1.25506.8.35.1.1.1.29 | DropDirection | read-write | Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions. |
| I32 hh3cifBMbpsUniSuppressionMax | 1.3.6.1.4.1.25506.8.35.1.1.1.30 | Integer32 | read-only | The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured. |
| I32 hh3cifBMbpsUniSuppression | 1.3.6.1.4.1.25506.8.35.1.1.1.31 | Integer32 | read-write | With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hh3cifBMbpsUniSuppressionMax in the entry. The default value of hh3cifBMbpsUniSuppression is the value of hh3cifBMbpsUniSuppressionMax. |
| I32 hh3cifBKbpsUniSuppressionMax | 1.3.6.1.4.1.25506.8.35.1.1.1.32 | Integer32 | read-only | The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured. |
| I32 hh3cifBKbpsUniSuppressionStep | 1.3.6.1.4.1.25506.8.35.1.1.1.33 | Integer32 | read-only | The step of unicast suppression with bandwidth-based(Kbps). |
| I32 hh3cifBKbpsUniSuppression | 1.3.6.1.4.1.25506.8.35.1.1.1.34 | Integer32 | read-write | With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hh3cifBKbpsUniSuppressionMax in the entry. The value of hh3cifBKbpsUniSuppression must be multiple of the value of hh3cifBKbpsUniSuppressionStep. The default value of hh3cifBKbpsUniSuppression is the value of hh3cifBKbpsUniSuppressionMax. |
| C64 hh3cifOutPayloadOctetsEx | 1.3.6.1.4.1.25506.8.35.1.1.1.35 | Counter64 | read-only | The actual output octets of the interface. |
| C64 hh3cifInPayloadOctets | 1.3.6.1.4.1.25506.8.35.1.1.1.36 | Counter64 | read-only | The actual input octets of the interface. |
| I32 hh3cifInErrorPktsRate | 1.3.6.1.4.1.25506.8.35.1.1.1.37 | Integer32 | read-only | The rate of inbound error packets on the interface. |
| C64 hh3cifInPkts | 1.3.6.1.4.1.25506.8.35.1.1.1.38 | Counter64 | read-only | The number of packets received on the interface. |
| C64 hh3cifInNormalPkts | 1.3.6.1.4.1.25506.8.35.1.1.1.39 | Counter64 | read-only | The number of normal packets received on the interface. |
| C64 hh3cifOutPkts | 1.3.6.1.4.1.25506.8.35.1.1.1.40 | Counter64 | read-only | The number of packets sent on the interface. |
| hh3cifAggregateTable | 1.3.6.1.4.1.25506.8.35.1.2 | not-accessible | Port aggregation information table. | |
| hh3cifAggregateEntry | 1.3.6.1.4.1.25506.8.35.1.2.1 | not-accessible | Port aggregation information table. | |
| NUM hh3cifAggregatePortIndex | 1.3.6.1.4.1.25506.8.35.1.2.1.1 | InterfaceIndex | read-only | Index number of the main aggregated port. |
| OCT hh3cifAggregatePortName | 1.3.6.1.4.1.25506.8.35.1.2.1.2 | OCTET STRING | read-write | Aggregation group name. |
| POR hh3cifAggregatePortListPorts | 1.3.6.1.4.1.25506.8.35.1.2.1.3 | PortList | read-write | Portlist of a aggregating. |
| INT hh3cifAggregateModel | 1.3.6.1.4.1.25506.8.35.1.2.1.4 | INTEGER | read-write | Load sharing mode for the port aggregation. |
| ROW hh3cifAggregateOperStatus | 1.3.6.1.4.1.25506.8.35.1.2.1.5 | RowStatus | read-create | Current operation status of the row. |
| hh3cifHybridPortTable | 1.3.6.1.4.1.25506.8.35.1.3 | not-accessible | Hybrid-port configuration table. | |
| hh3cifHybridPortEntry | 1.3.6.1.4.1.25506.8.35.1.3.1 | not-accessible | Hybrid-port configuration table. | |
| INT hh3cifHybridPortIndex | 1.3.6.1.4.1.25506.8.35.1.3.1.1 | INTEGER | read-only | Index number of Hybrid-port. |
| OCT hh3cifHybridTaggedVlanListLow | 1.3.6.1.4.1.25506.8.35.1.3.1.2 | OCTET STRING | read-write | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'. |
| OCT hh3cifHybridTaggedVlanListHigh | 1.3.6.1.4.1.25506.8.35.1.3.1.3 | OCTET STRING | read-write | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'. |
| OCT hh3cifHybridUnTaggedVlanListLow | 1.3.6.1.4.1.25506.8.35.1.3.1.4 | OCTET STRING | read-write | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'. |
| OCT hh3cifHybridUnTaggedVlanListHigh | 1.3.6.1.4.1.25506.8.35.1.3.1.5 | OCTET STRING | read-write | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'. |
| hh3cifComboPortTable | 1.3.6.1.4.1.25506.8.35.1.4 | not-accessible | Combo-port table. | |
| hh3cifComboPortEntry | 1.3.6.1.4.1.25506.8.35.1.4.1 | not-accessible | The entry of hh3cifComboPortTable. | |
| NUM hh3cifComboPortIndex | 1.3.6.1.4.1.25506.8.35.1.4.1.1 | InterfaceIndex | read-only | The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces. |
| INT hh3cifComboPortCurActive | 1.3.6.1.4.1.25506.8.35.1.4.1.2 | INTEGER | read-write | Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported. |
| hh3cLswL2InfMib | 1.3.6.1.4.1.25506.8.35.5 | |||
| hh3cLswL2InfMibObject | 1.3.6.1.4.1.25506.8.35.5.1 | |||
| INT hh3cSlotPortMax | 1.3.6.1.4.1.25506.8.35.5.1.1 | INTEGER | read-only | Max ports of the slots. |
| INT hh3cSwitchPortMax | 1.3.6.1.4.1.25506.8.35.5.1.2 | INTEGER | read-only | Max ports that this switch includes. |
| hh3cifVLANTrunkStatusTable | 1.3.6.1.4.1.25506.8.35.5.1.3 | not-accessible | Gmosaic attributes on the VlanTrunk port. | |
| hh3cifVLANTrunkStatusEntry | 1.3.6.1.4.1.25506.8.35.5.1.3.1 | not-accessible | Gmosaic attributes on the VlanTrunk port. | |
| NUM hh3cifVLANTrunkIndex | 1.3.6.1.4.1.25506.8.35.5.1.3.1.1 | InterfaceIndex | read-only | Index number of the VLANTrunk interface. |
| INT hh3cifVLANTrunkGvrpRegistration | 1.3.6.1.4.1.25506.8.35.5.1.3.1.2 | INTEGER | read-write | GMOSAIC registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port. |
| OCT hh3cifVLANTrunkPassListLow | 1.3.6.1.4.1.25506.8.35.5.1.3.1.4 | OCTET STRING | read-only | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'. |
| OCT hh3cifVLANTrunkPassListHigh | 1.3.6.1.4.1.25506.8.35.5.1.3.1.5 | OCTET STRING | read-only | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'. |
| OCT hh3cifVLANTrunkAllowListLow | 1.3.6.1.4.1.25506.8.35.5.1.3.1.6 | OCTET STRING | read-write | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'. |
| OCT hh3cifVLANTrunkAllowListHigh | 1.3.6.1.4.1.25506.8.35.5.1.3.1.7 | OCTET STRING | read-write | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'. |
| hh3cethernetTable | 1.3.6.1.4.1.25506.8.35.5.1.4 | not-accessible | Ethernet port attribute table. | |
| hh3cethernetEntry | 1.3.6.1.4.1.25506.8.35.5.1.4.1 | not-accessible | Entries of Ethernet port attribute table | |
| INT hh3cifEthernetDuplex | 1.3.6.1.4.1.25506.8.35.5.1.4.1.3 | INTEGER | read-write | Ethernet interface mode. |
| INT hh3cifEthernetMTU | 1.3.6.1.4.1.25506.8.35.5.1.4.1.4 | INTEGER | read-write | MTU on the Ethernet interface. |
| INT hh3cifEthernetSpeed | 1.3.6.1.4.1.25506.8.35.5.1.4.1.5 | INTEGER | read-write | Ethernet interface speed. |
| INT hh3cifEthernetMdi | 1.3.6.1.4.1.25506.8.35.5.1.4.1.7 | INTEGER | read-write | Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3 |
| INT hh3cMaxMacLearn | 1.3.6.1.4.1.25506.8.35.5.1.4.1.8 | INTEGER | read-write | The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited. |
| INT hh3cifMacAddressLearn | 1.3.6.1.4.1.25506.8.35.5.1.4.1.9 | INTEGER | read-only | This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set. |
| INT hh3cifEthernetTest | 1.3.6.1.4.1.25506.8.35.5.1.4.1.10 | INTEGER | read-write | Test this interface. The actual testing will be different according to products. Read operation not supported. |
| INT hh3cifMacAddrLearnMode | 1.3.6.1.4.1.25506.8.35.5.1.4.1.11 | INTEGER | read-only | Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning. |
| INT hh3cifEthernetFlowInterval | 1.3.6.1.4.1.25506.8.35.5.1.4.1.12 | INTEGER | read-write | Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5. |
| OCT hh3cifEthernetIsolate | 1.3.6.1.4.1.25506.8.35.5.1.4.1.13 | OCTET STRING | read-write | Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6. |
| INT hh3cifVlanVPNStatus | 1.3.6.1.4.1.25506.8.35.5.1.4.1.14 | INTEGER | read-write | Vlan VPN enable status. |
| INT hh3cifVlanVPNUplinkStatus | 1.3.6.1.4.1.25506.8.35.5.1.4.1.15 | INTEGER | read-write | Vlan VPN uplink status. |
| I32 hh3cifVlanVPNTPID | 1.3.6.1.4.1.25506.8.35.5.1.4.1.16 | Integer32 | read-write | Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hh3cVlanVPNTPIDMode to get more information. |
| I32 hh3cifIsolateGroupID | 1.3.6.1.4.1.25506.8.35.5.1.4.1.17 | Integer32 | read-write | Isolate group identifier. Value zero means this interface does not belong to any isolate group. |
| INT hh3cifisUplinkPort | 1.3.6.1.4.1.25506.8.35.5.1.4.1.18 | INTEGER | read-only | Ethernet uplink status, default value is 2. |
| SPE hh3cifEthernetAutoSpeedMask | 1.3.6.1.4.1.25506.8.35.5.1.4.1.19 | SpeedModeFlag | read-only | This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0. |
| SPE hh3cifEthernetAutoSpeed | 1.3.6.1.4.1.25506.8.35.5.1.4.1.20 | SpeedModeFlag | read-write | This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hh3cifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hh3cifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hh3cifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hh3cifEthernetAutoSpeedMask. |
| I32 hh3cIsolateGroupMax | 1.3.6.1.4.1.25506.8.35.5.1.5 | Integer32 | read-only | Max isolate group that this device support, the value is zero means that the device does not support isolate group. |
| INT hh3cGlobalBroadcastMaxPps | 1.3.6.1.4.1.25506.8.35.5.1.6 | INTEGER | read-write | The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting. |
| INT hh3cGlobalBroadcastMaxRatio | 1.3.6.1.4.1.25506.8.35.5.1.7 | INTEGER | read-write | The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting. |
| INT hh3cBpduTunnelStatus | 1.3.6.1.4.1.25506.8.35.5.1.8 | INTEGER | read-write | Bpdu tunnel enable status. |
| INT hh3cVlanVPNTPIDMode | 1.3.6.1.4.1.25506.8.35.5.1.9 | INTEGER | read-only | Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hh3cifVlanVPNTPID. In this situation, hh3cVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hh3cVlanVPNTPID. In this situation, hh3cifVlanVPNTPID in hh3cethernetTable has the same value with hh3cVlanVPNTPID. |
| I32 hh3cVlanVPNTPID | 1.3.6.1.4.1.25506.8.35.5.1.10 | Integer32 | read-write | Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. |
| hh3cPortIsolateGroupTable | 1.3.6.1.4.1.25506.8.35.5.1.11 | not-accessible | Isolate Group attribute table. | |
| hh3cPortIsolateGroupEntry | 1.3.6.1.4.1.25506.8.35.5.1.11.1 | not-accessible | The entry of hh3cPortIsolateGroupTable. | |
| I32 hh3cPortIsolateGroupIndex | 1.3.6.1.4.1.25506.8.35.5.1.11.1.1 | Integer32 | not-accessible | Port isolate group identifier. The index of the hh3cPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity. |
| NUM hh3cPortIsolateUplinkIfIndex | 1.3.6.1.4.1.25506.8.35.5.1.11.1.2 | InterfaceIndex | read-create | Index number of the uplink interface. |
| ROW hh3cPortIsolateGroupRowStatus | 1.3.6.1.4.1.25506.8.35.5.1.11.1.3 | RowStatus | read-create | Current operation status of the row. |
| STR hh3cPortIsolateGroupDescription | 1.3.6.1.4.1.25506.8.35.5.1.11.1.4 | DisplayString | read-create | Port isolate group description, default value is zero-length string. |
| I32 hh3cMaxMacLearnRange | 1.3.6.1.4.1.25506.8.35.5.1.12 | Integer32 | read-only | The maximum number of MAC address that the port supports. |
RFC description
Manages H3C Lan Switch interface configuration including VLAN, multicast, bandwidth suppression, and port isolation.
Start monitoring H3C managed switch (extended per-port interface attributes/storm suppression) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.