HH3C-LswINF-MIB :: hh3cifHybridUnTaggedVlanListLow

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › HH3C-LswINF-MIB › hh3cifHybridUnTaggedVlanListLow

hh3cifHybridUnTaggedVlanListLow

Module: HH3C-LswINF-MIB

OID (symbolic): HH3C-LswINF-MIB::hh3cifHybridUnTaggedVlanListLow

OID (numeric): 1.3.6.1.4.1.25506.8.35.1.3.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.

What is hh3cifHybridUnTaggedVlanListLow?

Bitmap where each bit marks a VLAN (1-2048 range) that this hybrid port sends/receives as untagged traffic, encoded the same way as the tagged-list objects. Set bits here for the VLAN(s), typically the native/access VLAN, that should leave the port without an 802.1Q tag.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.8.35.1.3.1.4
snmpwalk -v2c -c public <target> HH3C-LswINF-MIB::hh3cifHybridUnTaggedVlanListLow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.8.35.1.3.1.4.1
snmpget -v2c -c public <target> HH3C-LswINF-MIB::hh3cifHybridUnTaggedVlanListLow.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.8.35.1.3.1.4.1 s <value>

Start monitoring H3C managed switch (extended per-port interface attributes/storm suppression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-LswINF-MIB::hh3cifHybridUnTaggedVlanListLow OID value, configure state conditions and alerts, and monitor any H3C managed switch (extended per-port interface attributes/storm suppression) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.8hh3cRhwHH3C-OID-MIB
1.3.6.1.4.1.25506.8.35hh3clswCommonHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.8.35.1hh3cLswExtInterfaceHH3C-LswINF-MIB
1.3.6.1.4.1.25506.8.35.1.3hh3cifHybridPortTableHH3C-LswINF-MIB
1.3.6.1.4.1.25506.8.35.1.3.1hh3cifHybridPortEntryHH3C-LswINF-MIB
1.3.6.1.4.1.25506.8.35.1.3.1.4hh3cifHybridUnTaggedVlanListLowHH3C-LswINF-MIB