All MIBs › HH3C-LswINF-MIB › hh3cifHybridTaggedVlanListLow
hh3cifHybridTaggedVlanListLow
Module: HH3C-LswINF-MIB
OID (symbolic): HH3C-LswINF-MIB::hh3cifHybridTaggedVlanListLow
OID (numeric): 1.3.6.1.4.1.25506.8.35.1.3.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
What is hh3cifHybridTaggedVlanListLow?
Bitmap where each bit represents one VLAN (1-2048 range) that this hybrid port sends/receives as tagged traffic; the first octet covers VLANs 1-8, the second 9-16, and so on, high bit = highest VLAN in that octet. Admins set bits here to mark which lower-numbered VLANs a trunk-like hybrid port should tag on egress.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.8.35.1.3.1.2 snmpwalk -v2c -c public <target> HH3C-LswINF-MIB::hh3cifHybridTaggedVlanListLow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.8.35.1.3.1.2.1 snmpget -v2c -c public <target> HH3C-LswINF-MIB::hh3cifHybridTaggedVlanListLow.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.8.35.1.3.1.2.1 s <value>
Start monitoring H3C managed switch (extended per-port interface attributes/storm suppression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-LswINF-MIB::hh3cifHybridTaggedVlanListLow OID value, configure state conditions and alerts, and monitor any H3C managed switch (extended per-port interface attributes/storm suppression) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.8 | hh3cRhw | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.8.35 | hh3clswCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.8.35.1 | hh3cLswExtInterface | HH3C-LswINF-MIB |
| 1.3.6.1.4.1.25506.8.35.1.3 | hh3cifHybridPortTable | HH3C-LswINF-MIB |
| 1.3.6.1.4.1.25506.8.35.1.3.1 | hh3cifHybridPortEntry | HH3C-LswINF-MIB |
| 1.3.6.1.4.1.25506.8.35.1.3.1.2 | hh3cifHybridTaggedVlanListLow | HH3C-LswINF-MIB |