HH3C-LswINF-MIB :: hh3cifHybridTaggedVlanListHigh

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › HH3C-LswINF-MIB › hh3cifHybridTaggedVlanListHigh

hh3cifHybridTaggedVlanListHigh

Module: HH3C-LswINF-MIB

OID (symbolic): HH3C-LswINF-MIB::hh3cifHybridTaggedVlanListHigh

OID (numeric): 1.3.6.1.4.1.25506.8.35.1.3.1.3

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.

What is hh3cifHybridTaggedVlanListHigh?

Bitmap covering the upper VLAN range (2049 and above) that this hybrid port carries as tagged traffic, using the same one-bit-per-VLAN encoding as hh3cifHybridTaggedVlanListLow but starting at VLAN 2049. Use it alongside the Low object when your VLAN IDs extend past 2048.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.8.35.1.3.1.3
snmpwalk -v2c -c public <target> HH3C-LswINF-MIB::hh3cifHybridTaggedVlanListHigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.8.35.1.3.1.3.1
snmpget -v2c -c public <target> HH3C-LswINF-MIB::hh3cifHybridTaggedVlanListHigh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.8.35.1.3.1.3.1 s <value>

Start monitoring H3C managed switch (extended per-port interface attributes/storm suppression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-LswINF-MIB::hh3cifHybridTaggedVlanListHigh OID value, configure state conditions and alerts, and monitor any H3C managed switch (extended per-port interface attributes/storm suppression) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25506hh3cHH3C-OID-MIB
1.3.6.1.4.1.25506.8hh3cRhwHH3C-OID-MIB
1.3.6.1.4.1.25506.8.35hh3clswCommonHH3C-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.25506.8.35.1hh3cLswExtInterfaceHH3C-LswINF-MIB
1.3.6.1.4.1.25506.8.35.1.3hh3cifHybridPortTableHH3C-LswINF-MIB
1.3.6.1.4.1.25506.8.35.1.3.1hh3cifHybridPortEntryHH3C-LswINF-MIB
1.3.6.1.4.1.25506.8.35.1.3.1.3hh3cifHybridTaggedVlanListHighHH3C-LswINF-MIB