HH3C-IPX-MIB

All MIBs › HH3C-IPX-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2004-12-24

Category: Routing Protocols, Vendor: H3C/HH3C

Description: Covers IPX (Internetwork Packet Exchange) protocol configuration and routing on legacy H3C network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-IPX-MIB?

HH3C-IPX-MIB is an H3C proprietary MIB managing the legacy IPX (Novell NetWare) protocol across four areas: per-interface IPX configuration/statistics, RIP-based IPX routing, SAP service advertisement, and related IPX subsystems. Its global status object and interface configuration table (keyed by interface index) report the IPX network/node ID, split-horizon setting, RIP update timer ("tick") value, update-change-only behavior, and RIP MTU per interface. As a configuration/protocol-status MIB it lets an administrator confirm IPX is enabled with the correct network/node addressing on each interface. It is deployed on H3C routers/switches in legacy IPX/NetWare environments. Engineers can download the HH3C-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C routers/switches (legacy IPX/NetWare environments)

Monitoring Examples

An administrator checks hh3cIpxIfNetId and hh3cIpxIfSplitHorizon per interface to confirm IPX addressing and routing-loop prevention settings are correct in a legacy NetWare environment.

What Can Be Monitored

per-interface IPX network/node ID and RIP timer configuration

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using hh3cIpxStatTotalReceives OID:

Select an H3C router/switch (legacy Novell IPX/NetWare) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cIpxStatTotalReceives into the Find box to locate it in the OID tree, then select it and click OK. The total number of packets received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cIpx	1.3.6.1.4.1.25506.2.34			This MIB defines management information used on products which support ipx protocol. It includes 4 parts: 1.ipx interface configuration group - This group contains configurable management information and statistic information on each interface. 2.rip group - Rip means route information protocol. This group contains configurable management information and route status and route statistic information. 3.sap group - Sap means service access group. This group contains all service information. 4.ipx statistics group - This group includes ipx statistic information on all interfaces.
hh3cIpxConfig	1.3.6.1.4.1.25506.2.34.1
ENA hh3cIpxStatus	1.3.6.1.4.1.25506.2.34.1.1	EnabledStatus	read-write	This object is used to enable or disable ipx globally.
hh3cIpxIfConfigTable	1.3.6.1.4.1.25506.2.34.1.2		not-accessible	Table of configurable management information on each interface.
hh3cIpxIfConfigEntry	1.3.6.1.4.1.25506.2.34.1.2.1		not-accessible	An entry in the table, containing management information about a single interface.
I32 hh3cIpxIfIndex	1.3.6.1.4.1.25506.2.34.1.2.1.1	Integer32	not-accessible	This variable uniquely identifies the interface to which the configurations are applied.
OCT hh3cIpxIfNetId	1.3.6.1.4.1.25506.2.34.1.2.1.2	OCTET STRING	read-create	The network number of the IPX address of this interface.
OCT hh3cIpxIfNodeId	1.3.6.1.4.1.25506.2.34.1.2.1.3	OCTET STRING	read-only	The node number of the IPX address of this interface.
ENA hh3cIpxIfSplitHorizon	1.3.6.1.4.1.25506.2.34.1.2.1.4	EnabledStatus	read-create	This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable.
I32 hh3cIPxIfTick	1.3.6.1.4.1.25506.2.34.1.2.1.5	Integer32	read-create	This object is used to set this interface's delay time. It is counted by ticks which is 1/18 second. By default, the ethernet interface's delay time is 1 tick, asynchronous serial interface's delay time is 30 ticks, WAN interface's delay time is 6 ticks.
ENA hh3cIpxIfUpdateChangeOnly	1.3.6.1.4.1.25506.2.34.1.2.1.6	EnabledStatus	read-create	When this variable is set to 'enabled', updating change is on. And sap and rip will send updating packets periodically to avoid broadcast storm. Whereas updating change is off.
I32 hh3cIpxIfRipMtu	1.3.6.1.4.1.25506.2.34.1.2.1.7	Integer32	read-create	This variable is used to define the max length of RIP updating packets.
INT hh3cIpxIfEncapsuleType	1.3.6.1.4.1.25506.2.34.1.2.1.8	INTEGER	read-create	This node is used to define the encapsulating form of IPX packets. 'dot2' indicates the form is 802.2, while 'dot3' means 802.3. And 'snap' indicates the form is ethernet-snap. It takes effect only on ethernet interface, and the default value is 'dot3', while 'unkown' for other types of port.
ENA hh3cIpxIfNetbiosPropagation	1.3.6.1.4.1.25506.2.34.1.2.1.9	EnabledStatus	read-create	This node is used to configure whether the current interface can forward broadcasting packets which IPX type is 20 used for NetBIOS.
ENA hh3cIpxIfSapStatus	1.3.6.1.4.1.25506.2.34.1.2.1.10	EnabledStatus	read-create	The status of sap on the current interface. It is enabled when ipx is enabled on this interface.
I32 hh3cIpxIfSapMtu	1.3.6.1.4.1.25506.2.34.1.2.1.11	Integer32	read-create	This variable is used to define the max length of SAP refreshing packets.
ENA hh3cIpxIfGnsReply	1.3.6.1.4.1.25506.2.34.1.2.1.12	EnabledStatus	read-create	This object is used to enable or disable the current interface to response the IPX GNS request.
ROW hh3cIpxIfRowStatus	1.3.6.1.4.1.25506.2.34.1.2.1.13	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
hh3cIpxRip	1.3.6.1.4.1.25506.2.34.2
I32 hh3cIpxRouteMultiplier	1.3.6.1.4.1.25506.2.34.2.1	Integer32	read-write	This node is used to calculate Rip aging time of route information. The absolute aging time = (hh3cIpxRouteMultiplier * hh3cIpxRouteUpdateTimer).
I32 hh3cIpxRouteUpdateTimer	1.3.6.1.4.1.25506.2.34.2.2	Integer32	read-write	This node is used to set rip updating time which is based on seconds
ENA hh3cIpxRouteImpRouteStatic	1.3.6.1.4.1.25506.2.34.2.3	EnabledStatus	read-write	This object determines whether static route can be imported.
I32 hh3cIpxRouteLoadBalancePaths	1.3.6.1.4.1.25506.2.34.2.4	Integer32	read-write	This object defines the max equivalent paths to the same destination. If the newly defined value is smaller than the current value, the routes out of the new value will be set inactive.
I32 hh3cIpxRouteMaxResPaths	1.3.6.1.4.1.25506.2.34.2.5	Integer32	read-write	This object defines the max dynamic routes to the same destination. If the newly defined value is smaller than the current value, the routes will not be deleted until they age out or are deleted manually.
hh3cIpxRouteTable	1.3.6.1.4.1.25506.2.34.2.6		not-accessible	This table contains all dynamic and direct ipx route information of this system. The information of this table is read only.
hh3cIpxRouteEntry	1.3.6.1.4.1.25506.2.34.2.6.1		not-accessible	Each entry includes a dynamic or direct route.
I32 hh3cIpxRouteIndex	1.3.6.1.4.1.25506.2.34.2.6.1.1	Integer32	not-accessible	This object uniquely identifies a route.
OCT hh3cIpxRouteDestNetId	1.3.6.1.4.1.25506.2.34.2.6.1.2	OCTET STRING	read-only	The destination network number of this route information, and its value ranges from 1 to 0xfffffffe.
OCT hh3cIpxRouteNextHop	1.3.6.1.4.1.25506.2.34.2.6.1.3	OCTET STRING	read-only	The next hop of this route.
INT hh3cIpxRoutePro	1.3.6.1.4.1.25506.2.34.2.6.1.4	INTEGER	read-only	The protocol type of this route information.
I32 hh3cIpxRoutePre	1.3.6.1.4.1.25506.2.34.2.6.1.5	Integer32	read-only	The preference of this route information. The direct route's preference is 0, and it can't be modified. Dynamic route's default preference is 100.
I32 hh3cIpxRouteTicks	1.3.6.1.4.1.25506.2.34.2.6.1.6	Integer32	read-only	The time, in ticks, that the packet takes to reach the destination.
I32 hh3cIpxRouteHops	1.3.6.1.4.1.25506.2.34.2.6.1.7	Integer32	read-only	The object indicates the number of hops that the packet must be passed through to reach the destination.
I32 hh3cIpxRouteTime	1.3.6.1.4.1.25506.2.34.2.6.1.8	Integer32	read-only	The aging time of this route information. The aging time of static and interface route information is 0.
OCT hh3cIpxRouteOutInterface	1.3.6.1.4.1.25506.2.34.2.6.1.9	OCTET STRING	read-only	The out interface of this route information.
hh3cIpxStaticRouteTable	1.3.6.1.4.1.25506.2.34.2.7		not-accessible	This table contains all static ipx route information of this system.
hh3cIpxStaticRouteEntry	1.3.6.1.4.1.25506.2.34.2.7.1		not-accessible	Each entry includes one static route information.
OCT hh3cIpxStaticRouteDestNetId	1.3.6.1.4.1.25506.2.34.2.7.1.1	OCTET STRING	not-accessible	The index of Static Route Table. This object and hh3cIpxStaticRouteNextHop uniquely identify a static route. The destination network number of this static route information,and its value ranges from 1 to 0xfffffffe. Note that the broadcast network number is 0xffffffff and is not allowed in IPX. The network number of 0xfffffffe would be considered to be the network number of default route.
OCT hh3cIpxStaticRouteNextHop	1.3.6.1.4.1.25506.2.34.2.7.1.2	OCTET STRING	not-accessible	The sub-index of Static Route Table. The next hop of this static route information.
I32 hh3cIpxStaticRoutePre	1.3.6.1.4.1.25506.2.34.2.7.1.3	Integer32	read-create	The preference of this route information. Static route's preference is 60, and it can be configured.
OCT hh3cIpxStaticRouteOutIf	1.3.6.1.4.1.25506.2.34.2.7.1.4	OCTET STRING	read-create	The out interface of this route. This interface can be serial or pos interface.
I32 hh3cIpxStaticRouteTicks	1.3.6.1.4.1.25506.2.34.2.7.1.5	Integer32	read-create	The time, in ticks that the packet takes to reach the destination with the static route.
I32 hh3cIpxStaticRouteHops	1.3.6.1.4.1.25506.2.34.2.7.1.6	Integer32	read-create	This object indicates how many hops are needed to arrive at the destination network.
INT hh3cIpxStaticRouteStatus	1.3.6.1.4.1.25506.2.34.2.7.1.7	INTEGER	read-create	The status of this static route.
ROW hh3cIpxStaticRouteRowStatus	1.3.6.1.4.1.25506.2.34.2.7.1.8	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
hh3cIpxRouteStatTable	1.3.6.1.4.1.25506.2.34.2.8		not-accessible	A table includes all statistic route information.
hh3cIpxRouteStatEntry	1.3.6.1.4.1.25506.2.34.2.8.1		not-accessible	An entry records a statistic information of route.
INT hh3cIpxRouteStatPro	1.3.6.1.4.1.25506.2.34.2.8.1.1	INTEGER	not-accessible	The protocol type of the route information. The value of 'total' is the total amount of all kinds of IPX routes.
C32 hh3cIpxRouteStatRoutes	1.3.6.1.4.1.25506.2.34.2.8.1.2	Counter32	read-only	The route amount of the corresponding protocol type.
C32 hh3cIpxRouteStatActives	1.3.6.1.4.1.25506.2.34.2.8.1.3	Counter32	read-only	The active route amount of the corresponding protocol type.
C32 hh3cIpxRouteStatAddeds	1.3.6.1.4.1.25506.2.34.2.8.1.4	Counter32	read-only	The added route amount of the corresponding protocol type.
C32 hh3cIpxRouteStatDeleteds	1.3.6.1.4.1.25506.2.34.2.8.1.5	Counter32	read-only	The deleted but not freed route amount of the corresponding protocol type.
C32 hh3cIpxRouteStatFreeds	1.3.6.1.4.1.25506.2.34.2.8.1.6	Counter32	read-only	The freed route amount of the corresponding protocol type.
hh3cIpxSap	1.3.6.1.4.1.25506.2.34.3
I32 hh3cIpxSapMultiplier	1.3.6.1.4.1.25506.2.34.3.1	Integer32	read-write	This node is used to calculate aging time of service information. The absolute aging time = (hh3cIpxSapMultiplier * hh3cIpxSapUpdateTimer).
I32 hh3cIpxSapUpdateTimer	1.3.6.1.4.1.25506.2.34.3.2	Integer32	read-write	This node is used to set service packet updating time which is based on seconds.
ENA hh3cIpxSapGnsLoadBalance	1.3.6.1.4.1.25506.2.34.3.3	EnabledStatus	read-write	This object is used to set whether the system will reply to the GNS request with the Round-Robin way. By default, the system will response to the GNS request with the servers known to the device in turn, preventing from the nearest server's over loading. With value of disabled, in this way, the system will response to the request with the nearest server(who has smallest hop in system's service information table).
I32 hh3cIpxSapMaxResServers	1.3.6.1.4.1.25506.2.34.3.4	Integer32	read-write	This object is used to configure maximum number of servers of a type. If the newly defined value is smaller than the previous value, the information out of the value will not be deleted. If the queue reaches to the maximum number, no new information can be added.
hh3cIpxServiceTable	1.3.6.1.4.1.25506.2.34.3.5		not-accessible	This table inlcudes all dynamic service information. The dynamic service information can be read only.
hh3cIpxServiceEntry	1.3.6.1.4.1.25506.2.34.3.5.1		not-accessible	One entry records one service
I32 hh3cIpxServiceIndex	1.3.6.1.4.1.25506.2.34.3.5.1.1	Integer32	not-accessible	This object uniquely identifies a service information.
OCT hh3cIpxServiceName	1.3.6.1.4.1.25506.2.34.3.5.1.2	OCTET STRING	read-only	The name of the service.
OCT hh3cIpxServiceType	1.3.6.1.4.1.25506.2.34.3.5.1.3	OCTET STRING	read-only	The service type.
OCT hh3cIpxServiceNetId	1.3.6.1.4.1.25506.2.34.3.5.1.4	OCTET STRING	read-only	The IPX network number portion of the IPX address of the service.
OCT hh3cIpxServiceNodeId	1.3.6.1.4.1.25506.2.34.3.5.1.5	OCTET STRING	read-only	The IPX node number portion of the IPX address of the service.
OCT hh3cIpxServiceSocketNo	1.3.6.1.4.1.25506.2.34.3.5.1.6	OCTET STRING	read-only	The socket portion of the IPX address of the service
I32 hh3cIpxServicePreference	1.3.6.1.4.1.25506.2.34.3.5.1.7	Integer32	read-only	The service preference of the service
I32 hh3cIpxServiceHops	1.3.6.1.4.1.25506.2.34.3.5.1.8	Integer32	read-only	The hops from the device to the server.
OCT hh3cIpxServiceRecvIf	1.3.6.1.4.1.25506.2.34.3.5.1.9	OCTET STRING	read-only	Interface from which the service is receieved
hh3cIpxStaticServiceTable	1.3.6.1.4.1.25506.2.34.3.6		not-accessible	This table inlcudes all static service information. This table supports to creation and deletione of a static service, but not supports to modification
hh3cIpxStaticServiceEntry	1.3.6.1.4.1.25506.2.34.3.6.1		not-accessible	An entry records one service
OCT hh3cIpxStaticServiceType	1.3.6.1.4.1.25506.2.34.3.6.1.1	OCTET STRING	not-accessible	The index of static service table.
OCT hh3cIpxStaticServiceName	1.3.6.1.4.1.25506.2.34.3.6.1.2	OCTET STRING	not-accessible	The sub-index of static service table. The name of the service.
OCT hh3cIpxStaticServiceNetId	1.3.6.1.4.1.25506.2.34.3.6.1.3	OCTET STRING	not-accessible	The sub-index of static service table. The IPX network number portion of the IPX address of the service.
OCT hh3cIpxStaticServiceNodeId	1.3.6.1.4.1.25506.2.34.3.6.1.4	OCTET STRING	read-create	The IPX node number portion of the IPX address of the service.
OCT hh3cIpxStatciServiceSocketNo	1.3.6.1.4.1.25506.2.34.3.6.1.5	OCTET STRING	read-create	The socket portion of the IPX address of the service.
I32 hh3cIpxStaticServicePreference	1.3.6.1.4.1.25506.2.34.3.6.1.6	Integer32	read-create	The service preference of the server.
I32 hh3cIpxStaticServiceHops	1.3.6.1.4.1.25506.2.34.3.6.1.7	Integer32	read-create	The hops from the device to the server.
INT hh3cIpxStaticServiceStatus	1.3.6.1.4.1.25506.2.34.3.6.1.8	INTEGER	read-create	The status of the service that you created. The value of this object is determined by system.
ROW hh3cIpxStaticServiceRowStatus	1.3.6.1.4.1.25506.2.34.3.6.1.9	RowStatus	read-create	The status of this row. To create a row, user can select 'createAndGo'. If the row is created successfully, this object will became 'active'. To delete one row, user can select 'destory' and the row will be deleted.
hh3cIpxStat	1.3.6.1.4.1.25506.2.34.4
hh3cIpxStatGlobal	1.3.6.1.4.1.25506.2.34.4.1
C32 hh3cIpxStatTotalReceivesEx	1.3.6.1.4.1.25506.2.34.4.1.1	Counter32	read-only	The total number of packets received.
C32 hh3cIpxStatPitchs	1.3.6.1.4.1.25506.2.34.4.1.2	Counter32	read-only	The number of received packets filled by device when forwarding or delivering up to upper protocol.
C32 hh3cIpxStatLenErrors	1.3.6.1.4.1.25506.2.34.4.1.3	Counter32	read-only	The number of received packets discarded due to length error.
C32 hh3cIpxStatFormatErrors	1.3.6.1.4.1.25506.2.34.4.1.4	Counter32	read-only	The number of received packets discarded due to format error.
C32 hh3cIpxStatBadHops	1.3.6.1.4.1.25506.2.34.4.1.5	Counter32	read-only	The number of received packets which's value of field Hops is greater than 16.
C32 hh3cIpxStatHopsDiscards	1.3.6.1.4.1.25506.2.34.4.1.6	Counter32	read-only	The number of received packets of which hops portion is equal to 16.
C32 hh3cIpxStatOtherErrors	1.3.6.1.4.1.25506.2.34.4.1.7	Counter32	read-only	The number of received packets discarded due to other error.
C32 hh3cIpxStatLocalDests	1.3.6.1.4.1.25506.2.34.4.1.8	Counter32	read-only	The number of received packets which destination is the local device. Note that this would include the IPX NetBIOS propagation packets and those broadcast packets just to the network on which local device resides.
C32 hh3cIpxStatCantDeals	1.3.6.1.4.1.25506.2.34.4.1.9	Counter32	read-only	The number of received packets with which can't be dealt. One possible reason for discarding such a packet would be receiving a packet of an unknown or unsupported protocol.
C32 hh3cIpxStatForwards	1.3.6.1.4.1.25506.2.34.4.1.10	Counter32	read-only	The number of received packets to be forwarded in the case that the entity was not their final destination.
C32 hh3cIpxStatGenerates	1.3.6.1.4.1.25506.2.34.4.1.11	Counter32	read-only	The number of sent packets that the device generated itself.
C32 hh3cIpxStatNoRoutes	1.3.6.1.4.1.25506.2.34.4.1.12	Counter32	read-only	The number of packets discarded due to no route to the destination was found in routing table.
C32 hh3cIpxStatOutDiscards	1.3.6.1.4.1.25506.2.34.4.1.13	Counter32	read-only	The number of packets to be discarded when sending out. Note that this counter would not include the packet(s) discarded due to no route.
C32 hh3cIpxStatRipSends	1.3.6.1.4.1.25506.2.34.4.1.14	Counter32	read-only	The total number of RIP packets sent.
C32 hh3cIpxStatRipReceives	1.3.6.1.4.1.25506.2.34.4.1.15	Counter32	read-only	The total number of RIP packets received.
C32 hh3cIpxStaRipRspSends	1.3.6.1.4.1.25506.2.34.4.1.16	Counter32	read-only	The total number of RIP response packets sent.
C32 hh3cIpxStaRipRspReceives	1.3.6.1.4.1.25506.2.34.4.1.17	Counter32	read-only	The total number of RIP response packets received.
C32 hh3cIpxStatRipReqReceives	1.3.6.1.4.1.25506.2.34.4.1.18	Counter32	read-only	The total number of RIP request packets received.
C32 hh3cIpxStatRipReqDeals	1.3.6.1.4.1.25506.2.34.4.1.19	Counter32	read-only	The total number of RIP request packets dealt with.
C32 hh3cIpxStatRipReqSends	1.3.6.1.4.1.25506.2.34.4.1.20	Counter32	read-only	The total number of RIP request packets sent.
C32 hh3cIpxStatRipPeriUpdates	1.3.6.1.4.1.25506.2.34.4.1.21	Counter32	read-only	The total number of periodic update RIP packets sent.
C32 hh3cIpxStatSapGenReqReceives	1.3.6.1.4.1.25506.2.34.4.1.22	Counter32	read-only	The total number of SAP general request packets received.
C32 hh3cIpxStatSapSpecReqReceives	1.3.6.1.4.1.25506.2.34.4.1.23	Counter32	read-only	The total number of SAP specific request packets received.
C32 hh3cIpxStatSapGnsReqReceives	1.3.6.1.4.1.25506.2.34.4.1.24	Counter32	read-only	The total number of SAP GNS request packets received.
C32 hh3cIpxStatSapGenRspSends	1.3.6.1.4.1.25506.2.34.4.1.25	Counter32	read-only	The total number of SAP general response packets sent.
C32 hh3cIpxStatSapSpecRspSends	1.3.6.1.4.1.25506.2.34.4.1.26	Counter32	read-only	The total number of SAP specific response packets sent.
C32 hh3cIpxStatSapGnsRspSends	1.3.6.1.4.1.25506.2.34.4.1.27	Counter32	read-only	The total number of SAP GNS response packets sent.
C32 hh3cIpxStatSapPeriUpdates	1.3.6.1.4.1.25506.2.34.4.1.28	Counter32	read-only	The total number of SAP periodic update packets sent.
C32 hh3cIpxStatSapInPktErrors	1.3.6.1.4.1.25506.2.34.4.1.29	Counter32	read-only	The total number of SAP error packets received.
hh3cIpxStatInterface	1.3.6.1.4.1.25506.2.34.4.2
hh3cIpxIfStatTable	1.3.6.1.4.1.25506.2.34.4.2.1		not-accessible	The table of the statistic information on each interface.
hh3cIpxIfStatEntry	1.3.6.1.4.1.25506.2.34.4.2.1.1		not-accessible	The entry of the statistic table.
I32 hh3cIpxIfStatIndex	1.3.6.1.4.1.25506.2.34.4.2.1.1.1	Integer32	not-accessible	The index of the table's entry. According to the interface's index.
OCT hh3cIpxIfStatNetId	1.3.6.1.4.1.25506.2.34.4.2.1.1.2	OCTET STRING	read-only	The network number of the IPX address of this interface.
OCT hh3cIpxIfStatNodeId	1.3.6.1.4.1.25506.2.34.4.2.1.1.3	OCTET STRING	read-only	The node number of the IPX address of this interface.
C32 hh3cIpxIfStatIpxReceives	1.3.6.1.4.1.25506.2.34.4.2.1.1.4	Counter32	read-only	The total number of packets received on the interface.
C32 hh3cIpxIfStatIpxSends	1.3.6.1.4.1.25506.2.34.4.2.1.1.5	Counter32	read-only	The total number of packets sent on the interface.
C32 hh3cIpxIfStatIpxRecvBytes	1.3.6.1.4.1.25506.2.34.4.2.1.1.6	Counter32	read-only	The total number of bytes received on the interface.
C32 hh3cIpxIfStatIpxSendBytes	1.3.6.1.4.1.25506.2.34.4.2.1.1.7	Counter32	read-only	The total number of bytes sent on the interface.
C32 hh3cIpxIfStatRipReceives	1.3.6.1.4.1.25506.2.34.4.2.1.1.8	Counter32	read-only	The total number of RIP packets received on the interface.
C32 hh3cIpxIfStatRipSends	1.3.6.1.4.1.25506.2.34.4.2.1.1.9	Counter32	read-only	The total number of RIP packets sent on the interface.
C32 hh3cIpxIfStatRipDiscards	1.3.6.1.4.1.25506.2.34.4.2.1.1.10	Counter32	read-only	The total number of RIP packets discarded on the interface.
C32 hh3cIpxIfStatRipSpecReqReceives	1.3.6.1.4.1.25506.2.34.4.2.1.1.11	Counter32	read-only	The total number of RIP specific request packets received on the interface.
C32 hh3cIpxIfStatRipSpecRspSends	1.3.6.1.4.1.25506.2.34.4.2.1.1.12	Counter32	read-only	The total number of RIP specific response packets sent on the interface.
C32 hh3cIpxIfStatRipGenReqReceives	1.3.6.1.4.1.25506.2.34.4.2.1.1.13	Counter32	read-only	The total number of RIP general request packets received on the interface.
C32 hh3cIpxIfStatRipGenRspSends	1.3.6.1.4.1.25506.2.34.4.2.1.1.14	Counter32	read-only	The total number of RIP general response packets sent on the interface.
C32 hh3cIpxIfStatSapReceives	1.3.6.1.4.1.25506.2.34.4.2.1.1.15	Counter32	read-only	The total number of SAP packets received on the interface.
C32 hh3cIpxIfStatSapSends	1.3.6.1.4.1.25506.2.34.4.2.1.1.16	Counter32	read-only	The total number of SAP packets sent on the interface.
C32 hh3cIpxIfStatSapDiscards	1.3.6.1.4.1.25506.2.34.4.2.1.1.17	Counter32	read-only	The total number of SAP packets discarded on the interface.
C32 hh3cIpxIfStatSapGnsReqReceives	1.3.6.1.4.1.25506.2.34.4.2.1.1.18	Counter32	read-only	The total number of SAP GNS response packets received on the interface.
C32 hh3cIpxIfStatSapGnsRspSends	1.3.6.1.4.1.25506.2.34.4.2.1.1.19	Counter32	read-only	The total number of SAP GNS response packets sent on the interface.

RFC description

Manages IPX (Internetwork Packet Exchange) protocol configuration and routing on H3C legacy network devices.

Start monitoring H3C router/switch (legacy Novell IPX/NetWare) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-IPX-MIB