All MIBs › HH3C-IPX-MIB › hh3cIpxIfSplitHorizon
hh3cIpxIfSplitHorizon
Module: HH3C-IPX-MIB
OID (symbolic): HH3C-IPX-MIB::hh3cIpxIfSplitHorizon
OID (numeric): 1.3.6.1.4.1.25506.2.34.1.2.1.4
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-create
Description: This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable.
What is hh3cIpxIfSplitHorizon?
Controls split-horizon on this IPX interface (enabled by default), which prevents the interface from re-advertising a route back out the same interface it was learned on, avoiding routing loops; it has no effect on point-to-point links. Admins would disable it only in unusual topologies where the loop-prevention behavior would incorrectly block a needed route advertisement.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.34 | hh3cIpx | HH3C-IPX-MIB |
| 1.3.6.1.4.1.25506.2.34.1 | hh3cIpxConfig | HH3C-IPX-MIB |
| 1.3.6.1.4.1.25506.2.34.1.2 | hh3cIpxIfConfigTable | HH3C-IPX-MIB |
| 1.3.6.1.4.1.25506.2.34.1.2.1 | hh3cIpxIfConfigEntry | HH3C-IPX-MIB |
| 1.3.6.1.4.1.25506.2.34.1.2.1.4 | hh3cIpxIfSplitHorizon | HH3C-IPX-MIB |