HH3C-FC-ZONE-SERVER-MIB

All MIBs › HH3C-FC-ZONE-SERVER-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2013-12-25

Category: Domain: Storage, Fibre Channel and Storage, Vendor: H3C/HH3C

Description: Manages Fibre Channel zoning configurations, zone sets, and zone membership on H3C SAN fabric switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-FC-ZONE-SERVER-MIB?

HH3C-FC-ZONE-SERVER-MIB is a vendor-specific H3C MIB for managing Fibre Channel (FC) zoning on SAN fabric switches, covering both Basic Zoning and Enhanced Zoning management as used to control which FC-connected devices can communicate with each other. It exposes zone-server configuration such as zoning mode, hard-zone enforcement, distribution rules, default zone settings, merge-control settings, and the outcome of the last zoning operation, alongside zone-set tables identifying named zone sets by index. This MIB is used to monitor the configuration/software state of SAN fabric security policy, confirming which zoning mode and merge rules are in effect and whether the last zone-distribution or merge operation succeeded, which is critical since a failed zone merge can cause storage devices to become unreachable. It relies conceptually on the Fibre Channel zoning standards (FC-GS/FC-SW) though implemented as a private H3C MIB rather than a standards-track one. It is typically deployed on H3C FC/SAN fabric switches in storage-area network environments requiring device-level access segmentation. Engineers can download the HH3C-FC-ZONE-SERVER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-FC-ZONE-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C Fibre Channel SAN fabric switches

Monitoring Examples

An administrator would check hh3cFcZsServerTable/hh3cFcZsServerEntry for hh3cFcZsZoneModeCfg and hh3cFcZsHardZoneEnable to confirm the fabric's current zoning mode and whether hardware-enforced zoning is active. The hh3cFcZsServerLastResult object reveals whether the most recent zone distribution or merge attempt succeeded or failed, which is critical after adding a new switch to the fabric. hh3cFcZsZonesetTable/hh3cFcZsZonesetEntry, indexed by hh3cFcZsZonesetIndex, lets an operator enumerate active zone sets by hh3cFcZsZonesetName to confirm the expected zoning policy is applied fleet-wide. A hh3cFcZsServerLastResult indicating merge failure after a fabric topology change would signal a zoning conflict that could isolate storage targets from initiators.

What Can Be Monitored

zoning mode configuration
hard zone enforcement state
zone merge/distribution result
active zone set names
default zone settings

Imported Objects

From HH3C-FC-TC-MIB

Hh3cFcNameId

From HH3C-VSAN-MIB

hh3cSan	MODULE-IDENTITY
hh3cVsanIndex	OBJECT-TYPE

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

From T11-FC-ZONE-SERVER-MIB

t11ZsActiveZoneIndex	OBJECT-TYPE
t11ZsActiveZoneMemberIndex	OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using hh3cFcZsPktInMergeReqCount OID:

Select an H3C Fibre Channel SAN switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cFcZsPktInMergeReqCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of Merge Request Frames received by local Zone Server from other Zone Servers. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cFcZoneMibObjects	1.3.6.1.4.1.25506.2.127.9.1
hh3cFcZoneServer	1.3.6.1.4.1.25506.2.127.9			This MIB module is intended for management of FC(Fibre Channel) Zoning entities, including Basic Zoning Management and Enhanced Zoning Management.
HH3 hh3cFcZsActivate	1.3.6.1.4.1.25506.2.127.9.1.2.1.1.1	Hh3cFcZsGenNameOrZero	read-write	Name of the Zone Set that needs to be activated. The value of this object when read is always zero-length.
hh3cFcZsActivateEntry	1.3.6.1.4.1.25506.2.127.9.1.2.1.1		not-accessible	An entry contains information of the activation about a Zone Set.
INT hh3cFcZsActivateFailReason	1.3.6.1.4.1.25506.2.127.9.1.2.1.1.4	INTEGER	read-only	The reason for the most recent failure of a Zone Set activation or deactivation. 'none' - No activation/deactivation invoked or the result of activation/deactivation is success. 'busy' - The management system is busy in some other process. 'activeZoneSetTooBig' - The Active Zone Set size in packet reached the maximum limit in Basic mode. 'noZoneSet' - No specified Zone Set found. 'noMember' - No port member found in the specified Zone Set.
INT hh3cFcZsActivateResult	1.3.6.1.4.1.25506.2.127.9.1.2.1.1.3	INTEGER	read-only	As a result of the most recent activation/deactivation. 'none' - No activation/deactivation invoked since the last restart of the management system. 'inProcess' - Activation/deactivation is still in progress. 'activateSuccess' - Activation completed successfully. 'activateFailure' - Activation failed due to some reason. 'deactivateSuccess' - Deactivation completed successfully. 'deactivateFailure' - Deactivation failed due to some reason.
hh3cFcZsActivateTable	1.3.6.1.4.1.25506.2.127.9.1.2.1		not-accessible	This table provides a mechanism to allow a Zone Set to be activated.
T/F hh3cFcZsActivationCompletedEnable	1.3.6.1.4.1.25506.2.127.9.1.4.1.5	TruthValue	read-write	Indicates whether the module will generate traps for activation/deactivation-completed events.
NTF hh3cFcZsActivationCompletedNotify	1.3.6.1.4.1.25506.2.127.9.1.4.0.5			A hh3cFcZsActivationCompletedNotify notification is sent whenever a activation/deactivation is completed.
hh3cFcZsActiveMemberEntry	1.3.6.1.4.1.25506.2.127.9.1.3.2.1		not-accessible	An entry contains information about Active Zone members in a specified VSAN.
INT hh3cFcZsActiveMemberPairwiseRole	1.3.6.1.4.1.25506.2.127.9.1.3.2.1.1	INTEGER	read-only	Indicates which role the Active Zone member is playing.
hh3cFcZsActiveMemberTable	1.3.6.1.4.1.25506.2.127.9.1.3.2		not-accessible	This table contains information about Active Zone members in each existing VSAN.
hh3cFcZsActiveZoneEntry	1.3.6.1.4.1.25506.2.127.9.1.3.1.1		not-accessible	An entry contains information about Active Zone in a specified VSAN.
T/F hh3cFcZsActiveZonePairwiseEnable	1.3.6.1.4.1.25506.2.127.9.1.3.1.1.1	TruthValue	read-only	Indicates whether Pairwise Zoning of an Active Zone is enabled.
hh3cFcZsActiveZoneTable	1.3.6.1.4.1.25506.2.127.9.1.3.1		not-accessible	This table contains information about Active Zone in each existing VSAN.
U32 hh3cFcZsAliasCount	1.3.6.1.4.1.25506.2.127.9.1.3.3.1.3	Unsigned32	read-only	Number of Zone aliases that exist in the specified VSAN.
INT hh3cFcZsClearAllPktStats	1.3.6.1.4.1.25506.2.127.9.1.2.5	INTEGER	read-write	An operational object to clear the statistics on packets for all existing VSANs. 'noOper' - Specifies no operation. 'clearStats' - Specifies the clear operation.
INT hh3cFcZsClearDatabase	1.3.6.1.4.1.25506.2.127.9.1.2.3.1.1	INTEGER	read-write	Specify the operation of clearing local Zone Set Database in this VSAN. 'noOper' - Specifies no operation. 'clearDb' - Specifies clear operation.
hh3cFcZsClearDatabaseEntry	1.3.6.1.4.1.25506.2.127.9.1.2.3.1		not-accessible	An entry provides an operational object to clear the local Zone Set Database for a specified VSAN.
hh3cFcZsClearDatabaseTable	1.3.6.1.4.1.25506.2.127.9.1.2.3		not-accessible	This table provides an operational object to clear the local Zone Set Database for each existing VSAN.
INT hh3cFcZsClearPktStats	1.3.6.1.4.1.25506.2.127.9.1.2.4.1.1	INTEGER	read-write	Specify the operation of clearing the statistics on packets in this VSAN. 'noOper' - Specifies no operation. 'clearStats' - Specifies the clear operation.
hh3cFcZsClearPktStatsEntry	1.3.6.1.4.1.25506.2.127.9.1.2.4.1		not-accessible	An entry provides an operational object to clear the statistics on packets for a specified VSAN.
hh3cFcZsClearPktStatsTable	1.3.6.1.4.1.25506.2.127.9.1.2.4		not-accessible	This table provides an operational object to clear the statistics on packets for each existing VSAN.
hh3cFcZsConfiguration	1.3.6.1.4.1.25506.2.127.9.1.1
INT hh3cFcZsDeactivate	1.3.6.1.4.1.25506.2.127.9.1.2.1.1.2	INTEGER	read-write	A request to deactivate the currently active Zone Set. The value of this object when read is always 'noOper'. 'noOper' - Specifies no operation. 'deactivate' - Specifies the deactivate operation.
T/F hh3cFcZsDefaultZoneChangedEnable	1.3.6.1.4.1.25506.2.127.9.1.4.1.1	TruthValue	read-write	Indicates whether the module will generate traps for Default Zone setting change events.
NTF hh3cFcZsDefaultZoneChangedNotify	1.3.6.1.4.1.25506.2.127.9.1.4.0.1			A hh3cFcZsDefaultZoneChangedNotify notification is sent when the Default Zone setting of a specified VSAN is changed.
INT hh3cFcZsDefaultZoneSetting	1.3.6.1.4.1.25506.2.127.9.1.1.1.1.4	INTEGER	read-write	This object controls the Zoning flag that governs the behavior of the Default Zone in this VSAN. If this object is set to 'permit', the members of the Default Zone in this VSAN can communicate with each other. If this object is set to 'deny', the members of the Default Zone in this VSAN cannot communicate with each other.
INT hh3cFcZsDistribute	1.3.6.1.4.1.25506.2.127.9.1.2.2.1.1	INTEGER	read-write	Specifies the operation of triggering a distribution in this VSAN. 'noOper' - Specifies no operation. 'distribute' - Specifies the distribute operation.
hh3cFcZsDistributeEntry	1.3.6.1.4.1.25506.2.127.9.1.2.2.1		not-accessible	This entry provides an operational object to trigger a distribution for a specified VSAN.
U32 hh3cFcZsDistributeExplainCode	1.3.6.1.4.1.25506.2.127.9.1.2.2.1.4	Unsigned32	read-only	This object contains the corresponding reason code explanation for hh3cFcZsDistributeReasonCode, and is meaningful only when the value of hh3cFcZsDistributeLastResult is 'rejectFailure'.
INT hh3cFcZsDistributeLastResult	1.3.6.1.4.1.25506.2.127.9.1.2.2.1.2	INTEGER	read-only	Specifies the result of triggering a distribution for VSAN. 'none' - No distribution invoked via the corresponding instance of distribution. 'success' - Distribution completed successfully. 'inProgress' - Distribution is still in progress. 'rejectFailure' - Distribution failed due to an SW_RJT. 'otherFault' - Distribution/commit failed for some other reason.
U32 hh3cFcZsDistributeReasonCode	1.3.6.1.4.1.25506.2.127.9.1.2.2.1.3	Unsigned32	read-only	The reason code in the SW_RJT packet received in the most recent distribution. This object is meaningful only when the value of hh3cFcZsDistributeLastResult is 'rejectFailure'.
INT hh3cFcZsDistributeRule	1.3.6.1.4.1.25506.2.127.9.1.1.1.1.3	INTEGER	read-write	This object specifies whether a complete distribution (or merge) will be applied when an activation(or merge) happened in Basic mode. If this object is set to 'full', both the Active Zone Set and Zone Set Database will be distributed (or merged) when an activation operation(or merge) is performed. If this object is set to 'activeOnly', only the Active Zone Set will be distributed(or merged) when an activation operation(or merge) is performed. The value 'none' is meaningless and can be used only in Enhanced mode.
hh3cFcZsDistributeTable	1.3.6.1.4.1.25506.2.127.9.1.2.2		not-accessible	This table provides an operational object to trigger a distribution for each existing VSAN.
T/F hh3cFcZsHardZoneChangedEnable	1.3.6.1.4.1.25506.2.127.9.1.4.1.2	TruthValue	read-write	Indicates whether the module will generate traps for hard Zone change events.
NTF hh3cFcZsHardZoneChangedNotify	1.3.6.1.4.1.25506.2.127.9.1.4.0.2			A hh3cFcZsHardZoneChangedNotify notification is sent when the hard Zone configuration of a specified VSAN is changed.
T/F hh3cFcZsHardZoneEnable	1.3.6.1.4.1.25506.2.127.9.1.1.1.1.2	TruthValue	read-write	This object indicates whether this switch, no matter in Basic or Enhanced mode, enforces Hard Zoning in this VSAN.
INT hh3cFcZsHardZoneStatus	1.3.6.1.4.1.25506.2.127.9.1.3.3.1.2	INTEGER	read-only	The current status of Hard Zone Server. 'enable' - Hard Zone Server is enabled. 'adminDisable' - Hard Zone Server is disabled administratively. 'noResourceDisable' - Hard Zone Server is disabled due to lack of hardware resource.
hh3cFcZsInformation	1.3.6.1.4.1.25506.2.127.9.1.3
HH3 hh3cFcZsLocalSwitchWWN	1.3.6.1.4.1.25506.2.127.9.1.4.2.1	Hh3cFcNameId	accessible-for-notify	This object indicates the WWN of the local switch.
INT hh3cFcZsMergeControlSetting	1.3.6.1.4.1.25506.2.127.9.1.1.1.1.5	INTEGER	read-write	This object controls the Enhanced Zoning flag that indicates the Merge Control Setting for this VSAN. It is meaningful only in Enhanced mode: 'none' - This value is meaningless and only can be used in Basic mode. 'allow' - A switch may join the Fabric only if its Zoning Database is able to merge with the Fabric's Zoning Database. 'restrict' - A switch may join the Fabric only if its Zoning Database is equal to the Fabric's Zoning Database.
INT hh3cFcZsMergeFailCause	1.3.6.1.4.1.25506.2.127.9.1.4.2.3	INTEGER	accessible-for-notify	Indicates the reason of a Zone merge failure. 'zoneModeInconsistent' - The zone mode is inconsistent. 'zonePolicyNotEqual' - Zone Merge-Control setting or Default-Zone doesn't match. 'hardZoneInconsistent' - The Hard Zone Attribute is inconsistent. 'dataNotEqualInRestrict' - The Merge-Control setting is Restrict and the peer zoning database is not equal. 'activeZoneSetMergeFailed' - The Active Zone Set merge failed. 'zoneMergeDataTooBig' - The merged packet was too large. 'zoningObjectNumberTooBig' - The number of zoning objects exceeded the limit. 'zoneDbMergeFaildInBasic' - The database merge failed in Basic mode. 'zoneDbMergeFaildInEnhanced' - The database merge failed in Enhanced mode. 'other' - Unknown reason.
T/F hh3cFcZsMergeFailedEnable	1.3.6.1.4.1.25506.2.127.9.1.4.1.3	TruthValue	read-write	Indicates whether the module will generate traps for Zone merge failure events.
NTF hh3cFcZsMergeFailedNotify	1.3.6.1.4.1.25506.2.127.9.1.4.0.3			A hh3cFcZsMergeFailedNotify notification is sent when a Zone merge failure occurs.
T/F hh3cFcZsMergeSucceededEnable	1.3.6.1.4.1.25506.2.127.9.1.4.1.4	TruthValue	read-write	Indicates whether the module will generate traps for Zone merge success events.
NTF hh3cFcZsMergeSucceededNotify	1.3.6.1.4.1.25506.2.127.9.1.4.0.4			A hh3cFcZsMergeSucceededNotify notification is sent when a successful Zone merge occurs.
hh3cFcZsNextFreeIndexInfo	1.3.6.1.4.1.25506.2.127.9.1.3.5
hh3cFcZsNotification	1.3.6.1.4.1.25506.2.127.9.1.4
hh3cFcZsNotificationPrefix	1.3.6.1.4.1.25506.2.127.9.1.4.0
hh3cFcZsNotificationSwitch	1.3.6.1.4.1.25506.2.127.9.1.4.1
hh3cFcZsObjsForNotification	1.3.6.1.4.1.25506.2.127.9.1.4.2
hh3cFcZsOperation	1.3.6.1.4.1.25506.2.127.9.1.2
HH3 hh3cFcZsPeerSwitchWWN	1.3.6.1.4.1.25506.2.127.9.1.4.2.2	Hh3cFcNameId	accessible-for-notify	This object indicates the WWN of the peer switch.
C64 hh3cFcZsPktInChangeAccCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.9	Counter64	read-only	Number of Accept messages received from other Zone Servers in response to change request sent by local Zone Server.
C64 hh3cFcZsPktInChangeReqCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.7	Counter64	read-only	Number of change requests received by local Zone Server from other Zone Servers.
C64 hh3cFcZsPktInChangeRjtCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.11	Counter64	read-only	Number of Reject messages received from other Zone Servers in response to change request sent by local Zone Server.
C64 hh3cFcZsPktInMergeAccCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.3	Counter64	read-only	Number of Merge Accept Frames received by local Zone Server from other Zone Servers.
C64 hh3cFcZsPktInMergeReqCountEx	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.1	Counter64	read-only	Number of Merge Request Frames received by local Zone Server from other Zone Servers.
C64 hh3cFcZsPktInMergeRjtCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.5	Counter64	read-only	Number of Merge Reject Frames received by local Zone Server from other Zone Servers.
C64 hh3cFcZsPktOutChangeAccCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.10	Counter64	read-only	Number of Accept messages sent to other Zone Servers in response to change request received by local Zone Server.
C64 hh3cFcZsPktOutChangeReqCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.8	Counter64	read-only	Number of change requests sent by local Zone Server to other Zone Servers.
C64 hh3cFcZsPktOutChangeRjtCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.12	Counter64	read-only	Number of Reject messages sent to other Zone Servers in response to change request received by local Zone Server.
C64 hh3cFcZsPktOutMergeAccCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.4	Counter64	read-only	Number of Merge Accept Frames sent by local Zone Server to other Zone Servers.
C64 hh3cFcZsPktOutMergeReqCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.2	Counter64	read-only	Number of Merge Request Frames sent by local Zone Server to other Zone Servers.
C64 hh3cFcZsPktOutMergeRjtCount	1.3.6.1.4.1.25506.2.127.9.1.3.4.1.6	Counter64	read-only	Number of Merge Reject Frames sent by local Zone Server to other Zone Servers.
hh3cFcZsPktStatsEntry	1.3.6.1.4.1.25506.2.127.9.1.3.4.1		not-accessible	An entry contains the statistics on packets of Zone Servers.
hh3cFcZsPktStatsTable	1.3.6.1.4.1.25506.2.127.9.1.3.4		not-accessible	Packet statistic table of Zone Servers.
hh3cFcZsServerEntry	1.3.6.1.4.1.25506.2.127.9.1.1.1.1		not-accessible	Each entry contains information specific to a Zone Server for a particular VSAN.
INT hh3cFcZsServerLastResult	1.3.6.1.4.1.25506.2.127.9.1.1.1.1.6	INTEGER	read-only	Current operational status of the latest configuration in this VSAN: 'none' - No corresponding operation has been performed yet. 'success' - The configuration was performed successfully. 'busy' - The configuration was performed unsuccessfully, because the system is busy with another zoning operation. 'noSupportInFabric' - The configuration was performed unsuccessfully, because one or more switches in this Fabric don't support Enhanced zoning. 'noSupportInBasic' - The configuration was performed unsuccessfully, because it is not supported in Basic mode. 'noSupportInEnhanced' - The configuration was performed unsuccessfully, because it is not supported in Enhanced mode. 'activeZoneSetTooBig' - The configuration was performed unsuccessfully, because the Active Zone Set is too large to be supported. 'otherFault' - The configuration was performed unsuccessfully for other reasons.
INT hh3cFcZsServerStatus	1.3.6.1.4.1.25506.2.127.9.1.3.3.1.1	INTEGER	read-only	The current status of Zone Server. 'free' - The Zone Server is now free. 'distribute' - The Zone Server is now busy distributing. 'merge' - The Zone Server is now busy merging.
hh3cFcZsServerStatusEntry	1.3.6.1.4.1.25506.2.127.9.1.3.3.1		not-accessible	An entry contains the configuration and running state of a specified VSAN.
hh3cFcZsServerStatusTable	1.3.6.1.4.1.25506.2.127.9.1.3.3		not-accessible	This table contains the configuration and running state of each existing VSAN.
hh3cFcZsServerTable	1.3.6.1.4.1.25506.2.127.9.1.1.1		not-accessible	A table that contains information about the Zone Servers in each VSAN and provides the capability to perform operations on their Zone Server databases.
hh3cFcZsSetZoneEntry	1.3.6.1.4.1.25506.2.127.9.1.1.4.1		not-accessible	Each entry specifies that a particular Zone is one of the Zones that form a particular Zone Set in the Zone Set database of a specified VSAN. When a row in this table exists, it references one row in the hh3cFcZsZonesetTable and one row in the hh3cFcZsZoneTable. The agent must ensure that both such rows when referenced by an active row in this table, do exist and have a status of 'active'.
ROW hh3cFcZsSetZoneRowStatus	1.3.6.1.4.1.25506.2.127.9.1.1.4.1.1	RowStatus	read-create	The status of this conceptual row.
hh3cFcZsSetZoneTable	1.3.6.1.4.1.25506.2.127.9.1.1.4		not-accessible	This table specifies which Zone belongs to which Zone Set in the Zone Set Database of the Zone Servers.
hh3cFcZsZoneAliasEntry	1.3.6.1.4.1.25506.2.127.9.1.1.5.1		not-accessible	Each entry contains information about a Zone alias in the Zone Set Database of a particular VSAN.
U32 hh3cFcZsZoneAliasIndex	1.3.6.1.4.1.25506.2.127.9.1.1.5.1.1	Unsigned32	not-accessible	An index value that uniquely identifies this Zone alias within the Zone Set Database.
HH3 hh3cFcZsZoneAliasName	1.3.6.1.4.1.25506.2.127.9.1.1.5.1.2	Hh3cFcZsGenName	read-create	The name of this Zone alias, which should be unique within a VSAN. The Zone alias can be renamed by setting this object to a new value.
U32 hh3cFcZsZoneAliasNextFreeIndex	1.3.6.1.4.1.25506.2.127.9.1.3.5.3	Unsigned32	read-only	Specifies the latest available index of hh3cFcZsZoneAliasIndex that can be used to identify a new Zone alias.
ROW hh3cFcZsZoneAliasRowStatus	1.3.6.1.4.1.25506.2.127.9.1.1.5.1.3	RowStatus	read-create	The status of this conceptual row.
hh3cFcZsZoneAliasTable	1.3.6.1.4.1.25506.2.127.9.1.1.5		not-accessible	This table contains information about the Zone aliases in the Zone Set Database of the Zone Server in each VSAN.
U32 hh3cFcZsZoneCount	1.3.6.1.4.1.25506.2.127.9.1.3.3.1.4	Unsigned32	read-only	Number of Zones that exist in the specified VSAN.
hh3cFcZsZoneEntry	1.3.6.1.4.1.25506.2.127.9.1.1.3.1		not-accessible	Each entry contains information about a Zone in the Zone Set Database in a specified VSAN.
U32 hh3cFcZsZoneIndex	1.3.6.1.4.1.25506.2.127.9.1.1.3.1.1	Unsigned32	not-accessible	An index value that uniquely identifies this Zone in the Zone Set Database on local switch.
hh3cFcZsZoneMemberEntry	1.3.6.1.4.1.25506.2.127.9.1.1.6.1		not-accessible	Each entry represents the relationship between a member and (one of) its 'parent(s)', i.e., a Zone or Zone alias the member belongs, within a particular VSAN.
HH3 hh3cFcZsZoneMemberFormat	1.3.6.1.4.1.25506.2.127.9.1.1.6.1.4	Hh3cFcZsZoneMemberType	read-create	This object identifies the format of the Zone/Zone alias member's identifier that is contained in hh3cFcZsZoneMemberIdentifier. This object cannot be modified while the value of the hh3cFcZsZoneMemberRowStatus object is 'active'.
OCT hh3cFcZsZoneMemberIdentifier	1.3.6.1.4.1.25506.2.127.9.1.1.6.1.5	OCTET STRING	read-create	This object contains the Member Identifier of the Zone or Zone alias. The interpretation of this object depends on the value of the corresponding instance of hh3cFcZsZoneMemberFormat: - if hh3cFcZsZoneMemberFormat is 'fcid', this object contains the 3-octet N_Port FC ID. - if hh3cFcZsZoneMemberFormat is 'fwwn', this object contains an 8-octet F_Port WWN. - if hh3cFcZsZoneMemberFormat is 'pwwn', this object contains an 8-octet N_Port WWN. - if hh3cFcZsZoneMemberFormat is 'aliasName', this object contains the value of hh3cFcZsZoneAliasName for some Zone alias in the same Zone Set Database. This object cannot be modified while the value of the hh3cFcZsZoneMemberRowStatus object is 'active'.
U32 hh3cFcZsZoneMemberIndex	1.3.6.1.4.1.25506.2.127.9.1.1.6.1.3	Unsigned32	not-accessible	An index value that uniquely identifies this Zone member among all Zone members in the Zone or Zone alias they belongs to.
U32 hh3cFcZsZoneMemberNextFreeIndex	1.3.6.1.4.1.25506.2.127.9.1.3.5.4.1.1	Unsigned32	read-only	Specifies the latest available index of hh3cFcZsZoneMemberIndex that can be used to identify a new member in a Zone or Zone alias.
hh3cFcZsZoneMemberNextFreeIndexEntry	1.3.6.1.4.1.25506.2.127.9.1.3.5.4.1		not-accessible	An entry contains the information of the latest available index that can be used to identify a new member in a Zone or Zone alias.
hh3cFcZsZoneMemberNextFreeIndexTable	1.3.6.1.4.1.25506.2.127.9.1.3.5.4		not-accessible	This table contains the information of the latest available index that can be used to identify a new member in each Zone or Zone alias.
INT hh3cFcZsZoneMemberPairwiseRole	1.3.6.1.4.1.25506.2.127.9.1.1.6.1.6	INTEGER	read-create	This object identifies the Pairwise role of the Zone/Zone alias member. If hh3cFcZsZoneMemberFormat is 'aliasName', the value of this object can only be 'none'. If hh3cFcZsZoneMemberFormat is not 'aliasName', the value of this object can't be 'none', and the default value is 'both' (including both 'initiator' and 'target' role). This object can be modified while the value of the hh3cFcZsZoneMemberRowStatus object is 'active'. The Pairwise role of a port member takes effect only when the hh3cFcZsZonePairwiseEnable of the Zone to which the port member belongs is set to 'true'.
U32 hh3cFcZsZoneMemberParentIndex	1.3.6.1.4.1.25506.2.127.9.1.1.6.1.2	Unsigned32	not-accessible	This object contains the index value of the Zone or Zone alias to which this member belongs. If the value of the corresponding instance of hh3cFcZsZoneMemberParentType is 'zone', this object will contain the value of the hh3cFcZsZoneIndex object of the Zone to which this member belongs. If the value of the corresponding instance of hh3cFcZsZoneMemberParentType is 'alias', this object will contain the value of the hh3cFcZsAliasIndex object of the Zone alias to which this member belongs.
INT hh3cFcZsZoneMemberParentType	1.3.6.1.4.1.25506.2.127.9.1.1.6.1.1	INTEGER	not-accessible	This object determines whether this member belongs to a Zone or Zone alias.
ROW hh3cFcZsZoneMemberRowStatus	1.3.6.1.4.1.25506.2.127.9.1.1.6.1.7	RowStatus	read-create	The status of this conceptual row.
hh3cFcZsZoneMemberTable	1.3.6.1.4.1.25506.2.127.9.1.1.6		not-accessible	This table contains all members of a Zone/Zone alias and information about those members in the Zone Set Database of the Zone Server in each VSAN.
INT hh3cFcZsZoneModeCfg	1.3.6.1.4.1.25506.2.127.9.1.1.1.1.1	INTEGER	read-write	The operational mode of the Zone Server. Setting this object to 'enhanced' is a request to set the operational mode of the Zone Server to Enhanced mode. This is possible only if all switches in the Fibre Channel Fabric are capable of working in Enhanced mode. Setting this object to 'basic' is a request to set the operational mode of the Zone Server to Basic mode.
HH3 hh3cFcZsZoneName	1.3.6.1.4.1.25506.2.127.9.1.1.3.1.2	Hh3cFcZsGenName	read-create	The name of this Zone, which should be unique within a VSAN. The Zone can be renamed by setting this object to a new value.
U32 hh3cFcZsZoneNextFreeIndex	1.3.6.1.4.1.25506.2.127.9.1.3.5.2	Unsigned32	read-only	Specifies the latest available index of hh3cFcZsZoneIndex that can be used to identify a new Zone.
T/F hh3cFcZsZonePairwiseEnable	1.3.6.1.4.1.25506.2.127.9.1.1.3.1.3	TruthValue	read-create	This object specifies whether Pairwise Zoning is enabled in this Zone. When Pairwise Zoning is enabled in a Zone, the behaviors of members in this Zone will be controlled through their roles. The members with the same role ('initiator' or 'target') can't communicate with each other, but those with different roles or with the same role 'both' can communicate with each other. When Pairwise Zoning is disabled in a Zone, the behaviors of members in this Zone will not be affected by their roles.
ROW hh3cFcZsZoneRowStatus	1.3.6.1.4.1.25506.2.127.9.1.1.3.1.4	RowStatus	read-create	The status of this conceptual row.
U32 hh3cFcZsZonesetCount	1.3.6.1.4.1.25506.2.127.9.1.3.3.1.5	Unsigned32	read-only	Number of Zone Sets that exist in the specified VSAN.
hh3cFcZsZonesetEntry	1.3.6.1.4.1.25506.2.127.9.1.1.2.1		not-accessible	Each entry contains the information of a Zone Set configured in a specified VSAN.
U32 hh3cFcZsZonesetIndex	1.3.6.1.4.1.25506.2.127.9.1.1.2.1.1	Unsigned32	not-accessible	The index of a Zone Set, which uniquely identifies a Zone Set in the Zone Set Database on local switch.
HH3 hh3cFcZsZonesetName	1.3.6.1.4.1.25506.2.127.9.1.1.2.1.2	Hh3cFcZsGenName	read-create	The name of this Zone Set, which should be unique within a VSAN. The Zone Set can be renamed by setting this object to a new value.
U32 hh3cFcZsZonesetNextFreeIndex	1.3.6.1.4.1.25506.2.127.9.1.3.5.1	Unsigned32	read-only	Specifies the latest available index of hh3cFcZsZonesetIndex that can be used to identify a new Zone Set.
ROW hh3cFcZsZonesetRowStatus	1.3.6.1.4.1.25506.2.127.9.1.1.2.1.3	RowStatus	read-create	The status of this conceptual row.
hh3cFcZsZonesetTable	1.3.6.1.4.1.25506.2.127.9.1.1.2		not-accessible	A table that contains information about each Zone Set in the Zone Set Database of the Zone Servers in a specified VSAN.
hh3cFcZsZoneTable	1.3.6.1.4.1.25506.2.127.9.1.1.3		not-accessible	This table contains information about all the Zones in the Zone Set Database of the Zone Servers in each VSAN.

RFC description

Manages Fibre Channel zoning servers on H3C SAN devices, supporting both basic and enhanced zoning management for FC network zones.

Start monitoring H3C Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-FC-ZONE-SERVER-MIB