All MIBs › H3C-WIPS-MIB
Organization: Hangzhou H3C Technologies Co., Ltd.
Last Updated: 2011-12-29
Category: Domain: Security, Technology: Wireless, Vendor: H3C/HH3C
Description: Monitors and manages H3C Wireless Intrusion Prevention System, detecting and mitigating rogue APs and wireless attacks.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is H3C-WIPS-MIB?
H3C-WIPS-MIB is a vendor-specific MIB from H3C for managing the Wireless Intrusion Prevention System (WIPS) feature on H3C wireless infrastructure, which detects rogue access points, unauthorized clients, and other wireless attacks and can take mitigating action. It exposes configuration objects such as feature enable state, sensor license count, blocklist action policy, aging timers for detected APs/stations/devices, and statistic/reclassification periods, plus reset operations for trust, block, ignore, and containment (ctm) lists. This MIB is used to monitor both the operational status of the WIPS security feature and its detection/response configuration, letting administrators confirm the number of licensed sensors in use and how aggressively the system ages out or reclassifies detected wireless devices. It is a private H3C MIB layered on top of standard 802.11 concepts but does not depend on an IETF wireless-security standard. It is typically deployed on H3C wireless LAN controllers and access points in enterprise environments requiring active rogue-AP detection and wireless attack mitigation, where H3C-WIPS-MIB SNMP monitoring confirms the WIPS feature and its sensor licensing remain correctly enabled.
IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-WIPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C wireless LAN controllers
- H3C wireless access points
Monitoring Examples
An administrator would check h3cWIPSEnable to confirm WIPS is active and h3cWIPSSensorLicenseNum to ensure enough sensor licenses are provisioned for the deployed AP count. Polling h3cWIPSBlocklistAction alongside h3cWIPSAPInactiveTime and h3cWIPSSTAInactiveTime reveals how the system handles detected rogue APs/stations and how quickly it ages out stale detections. The h3cWIPSStatisticPeriod and h3cWIPSReclassificationPeriod objects control how often detection statistics and device classifications refresh, while h3cWIPSResetAllBlockList and related reset objects let an operator clear accumulated block/trust/ignore lists during troubleshooting. A WIPS feature reporting disabled (h3cWIPSEnable off) unexpectedly would mean the wireless network has lost its rogue-AP detection coverage.
What Can Be Monitored
- WIPS enable status
- sensor license count
- blocklist action policy
- AP/station aging timers
- statistic and reclassification period
- trust/block/ignore list state
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-3COM-OID-MIB
| h3cCommon | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using h3cWIPSChlStatTotalPkt OID:
Select an H3C wireless LAN controller or access point as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cWIPSChlStatTotalPkt into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Represents the count of total frames in the channel. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| h3cWIPS | 1.3.6.1.4.1.2011.10.2.118 | This MIB provides information about WIPS feature. Wireless Intrusion Prevention System (WIPS) WIPS is designed to be employed in an area that is serviced by an existing wireless network. It aids in the early detection of malicious outsider attacks and intrusions via wireless networks, and takes corresponding measures in order to guarantee the wireless environment security. | ||
| h3cWIPSConfigGroup | 1.3.6.1.4.1.2011.10.2.118.1 | |||
| h3cWIPSGlobalConfigGroup | 1.3.6.1.4.1.2011.10.2.118.1.1 | |||
| T/F h3cWIPSEnable | 1.3.6.1.4.1.2011.10.2.118.1.1.1 | TruthValue | read-write | Represents whether the WIPS feature is enabled or not. 'true': enable the WIPS feature. 'false': disable the WIPS feature. WIPS and WIDS feature can not be enabled at the same time. |
| U32 h3cWIPSSensorLicenseNum | 1.3.6.1.4.1.2011.10.2.118.1.1.2 | Unsigned32 | read-only | Represents the number of sensor license. |
| INT h3cWIPSBlocklistAction | 1.3.6.1.4.1.2011.10.2.118.1.1.3 | INTEGER | read-write | Represents whether the block list feature is enabled or not. 'block' : Enable the block list feature to filter unwanted devices. 'unblock' : Disable the block list feature. |
| I32 h3cWIPSAPInactiveTime | 1.3.6.1.4.1.2011.10.2.118.1.1.4 | Integer32 | read-write | Represents the time for AP getting inactive. |
| I32 h3cWIPSSTAInactiveTime | 1.3.6.1.4.1.2011.10.2.118.1.1.5 | Integer32 | read-write | Represents the time for STA getting inactive. |
| I32 h3cWIPSDevAgingTime | 1.3.6.1.4.1.2011.10.2.118.1.1.6 | Integer32 | read-write | Represents the time for device getting aged. |
| I32 h3cWIPSStatisticPeriod | 1.3.6.1.4.1.2011.10.2.118.1.1.7 | Integer32 | read-write | Represents the period of WIPS reporting the statistic. |
| I32 h3cWIPSReclassificationPeriod | 1.3.6.1.4.1.2011.10.2.118.1.1.8 | Integer32 | read-write | Represents the period of WIPS reclassifying devices. |
| T/F h3cWIPSResetAllTrustList | 1.3.6.1.4.1.2011.10.2.118.1.1.9 | TruthValue | read-write | This object is used to remove all entries from the static trust list. It will return false for get operation. |
| T/F h3cWIPSResetAllBlockList | 1.3.6.1.4.1.2011.10.2.118.1.1.10 | TruthValue | read-write | This object is used to remove all entries from the static block list. It will return false for get operation. |
| T/F h3cWIPSResetAllIgnoreList | 1.3.6.1.4.1.2011.10.2.118.1.1.11 | TruthValue | read-write | This object is used to remove all entries from the ignore list. It will return false for get operation.. |
| T/F h3cWIPSResetAllCtmList | 1.3.6.1.4.1.2011.10.2.118.1.1.12 | TruthValue | read-write | This object is used to remove all entries from the static countermeasure list. It will return false for get operation. |
| OCT h3cWIPSPermitChlBitMap | 1.3.6.1.4.1.2011.10.2.118.1.1.13 | OCTET STRING | read-write | Represents the permit channel number by bitmap. |
| h3cWIPSVsdConfigGroup | 1.3.6.1.4.1.2011.10.2.118.1.2 | |||
| h3cWIPSVsdTable | 1.3.6.1.4.1.2011.10.2.118.1.2.1 | not-accessible | The table provides the list of virtual security domain. | |
| h3cWIPSVsdEntry | 1.3.6.1.4.1.2011.10.2.118.1.2.1.1 | not-accessible | Each entry contains information of each VSD. | |
| OCT h3cWIPSVsdNameCfg | 1.3.6.1.4.1.2011.10.2.118.1.2.1.1.1 | OCTET STRING | not-accessible | Represents the name of virtual security domain. |
| ROW h3cWIPSVsdRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.2.1.1.2 | RowStatus | read-create | The status of this table entry. |
| OCT h3cWIPSVsdAtkDctPolicyNameCfg | 1.3.6.1.4.1.2011.10.2.118.1.2.1.1.3 | OCTET STRING | read-create | Represents the name of attack detect policy attached to the VSD. |
| h3cWIPSRule2VsdTable | 1.3.6.1.4.1.2011.10.2.118.1.2.2 | not-accessible | The table defines the AP classification rules been attached to the VSD. | |
| h3cWIPSRule2VsdEntry | 1.3.6.1.4.1.2011.10.2.118.1.2.2.1 | not-accessible | Each entry contains information of each AP classification rule in each VSD. | |
| OCT h3cWIPSRule2VsdAPClaRuleNameCfg | 1.3.6.1.4.1.2011.10.2.118.1.2.2.1.1 | OCTET STRING | not-accessible | Represents the name of AP classification rule attached to the VSD. |
| ROW h3cWIPSRule2VsdRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.2.2.1.2 | RowStatus | read-create | The status of this table entry. |
| I32 h3cWIPSRule2VsdPrecedence | 1.3.6.1.4.1.2011.10.2.118.1.2.2.1.3 | Integer32 | read-create | Represents the precedence of AP classification rule attached to the VSD. |
| h3cWIPSSensor2VsdTable | 1.3.6.1.4.1.2011.10.2.118.1.2.3 | not-accessible | The table defines the sensor been attached to the VSD. | |
| h3cWIPSSensor2VsdEntry | 1.3.6.1.4.1.2011.10.2.118.1.2.3.1 | not-accessible | Each entry contains information of each sensor in each VSD. | |
| OCT h3cWIPSSensorNameCfg | 1.3.6.1.4.1.2011.10.2.118.1.2.3.1.1 | OCTET STRING | not-accessible | Represents the name of sensor attached to the VSD. |
| ROW h3cWIPSSensor2VsdRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.2.3.1.2 | RowStatus | read-create | The status of this table entry. |
| INT h3cWIPSSensorState | 1.3.6.1.4.1.2011.10.2.118.1.2.3.1.3 | INTEGER | read-create | Represents the running state of the sensor. It will return false for set operation. |
| h3cWIPSSensorRadioTable | 1.3.6.1.4.1.2011.10.2.118.1.2.4 | not-accessible | The table represents the list of sensor radio information. | |
| h3cWIPSSensorRadioEntry | 1.3.6.1.4.1.2011.10.2.118.1.2.4.1 | not-accessible | Each entry contains information of a radio of a sensor. | |
| I32 h3cWIPSSensorRadioRadioId | 1.3.6.1.4.1.2011.10.2.118.1.2.4.1.1 | Integer32 | not-accessible | Represents the radio identifier of the sensor. |
| INT h3cWIPSSensorRadioScanMode | 1.3.6.1.4.1.2011.10.2.118.1.2.4.1.2 | INTEGER | read-only | Represents the scanning mode configured to the radio. |
| h3cWIPSAPClaRuleTable | 1.3.6.1.4.1.2011.10.2.118.1.3 | not-accessible | The table defines the parameters for WIPS AP classification rule. One rule could be assigned to different VSDs. | |
| h3cWIPSAPClaRuleEntry | 1.3.6.1.4.1.2011.10.2.118.1.3.1 | not-accessible | Each entry contains information of each AP classification rule. | |
| OCT h3cWIPSAPClaRuleName | 1.3.6.1.4.1.2011.10.2.118.1.3.1.1 | OCTET STRING | not-accessible | Represents the name of AP classification rule. |
| ROW h3cWIPSAPClaRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.3.1.2 | RowStatus | read-create | The status of this table entry. |
| U32 h3cWIPSAPClaSeverityLevel | 1.3.6.1.4.1.2011.10.2.118.1.3.1.3 | Unsigned32 | read-create | Represents the severity level of the AP classification rule. Available value limits from 0 to 100. |
| T/F h3cWIPSAPClaRuleMatchAll | 1.3.6.1.4.1.2011.10.2.118.1.3.1.4 | TruthValue | read-create | Represents whether match all the AP classification sub-rules which have been configured. |
| H3C h3cWIPSAPClaType | 1.3.6.1.4.1.2011.10.2.118.1.3.1.5 | H3cWIPSAPClassifyType | read-create | Represents the type of AP classification. |
| INT h3cWIPSAPClaSubRuleSSIDOperator | 1.3.6.1.4.1.2011.10.2.118.1.3.1.6 | INTEGER | read-create | Represents the compare way of the SSID in the sub rule, including include/not include/equal/not equal. |
| T/F h3cWIPSAPClaSubRuleSSIDCase | 1.3.6.1.4.1.2011.10.2.118.1.3.1.7 | TruthValue | read-create | Represents the case sensitive or not for the SSID match. 'true': Case insensitive. 'false': Case sensitive. |
| OCT h3cWIPSAPClaSubRuleSSID | 1.3.6.1.4.1.2011.10.2.118.1.3.1.8 | OCTET STRING | read-create | Represents the SSID match template in the ap classification rule. |
| H3C h3cWIPSSecurityType | 1.3.6.1.4.1.2011.10.2.118.1.3.1.9 | H3cWIPSAPSecurityType | read-create | Represents the security type of active AP. |
| INT h3cWIPSSecurityTypeMatch | 1.3.6.1.4.1.2011.10.2.118.1.3.1.10 | INTEGER | read-create | Represents match way of the security type of active AP. |
| INT h3cWIPSAPAuthType | 1.3.6.1.4.1.2011.10.2.118.1.3.1.11 | INTEGER | read-create | Represents the authentication type of the AP. undo - represents undo operation |
| U32 h3cWIPSMaxRSSIValue | 1.3.6.1.4.1.2011.10.2.118.1.3.1.12 | Unsigned32 | read-create | Represents the high-limit of the RSSI of AP. Available value limits from 1 to 90. |
| U32 h3cWIPSMinRSSIValue | 1.3.6.1.4.1.2011.10.2.118.1.3.1.13 | Unsigned32 | read-create | Represents the low-limit of the RSSI of AP. Available value limits from 0 to 89. |
| U32 h3cWIPSMaxDuration | 1.3.6.1.4.1.2011.10.2.118.1.3.1.14 | Unsigned32 | read-create | Represents the high-limit of the duration of AP. Available value limits from 1 to 2592000. |
| U32 h3cWIPSMinDuration | 1.3.6.1.4.1.2011.10.2.118.1.3.1.15 | Unsigned32 | read-create | Represents the low-limit of the duration of AP. Available value limits from 0 to 2591999. |
| U32 h3cWIPSMaxAPNum | 1.3.6.1.4.1.2011.10.2.118.1.3.1.16 | Unsigned32 | read-create | Represents the high-limit of the number of AP. Available value limits from 1 to 128. |
| U32 h3cWIPSMinAPNum | 1.3.6.1.4.1.2011.10.2.118.1.3.1.17 | Unsigned32 | read-create | Represents the low-limit of the number of AP. Available value limits from 0 to 127. |
| U32 h3cWIPSMaxClientNum | 1.3.6.1.4.1.2011.10.2.118.1.3.1.18 | Unsigned32 | read-create | Represents the high-limit of the number of client. Available value limits from 1 to 128. |
| U32 h3cWIPSMinClientNum | 1.3.6.1.4.1.2011.10.2.118.1.3.1.19 | Unsigned32 | read-create | Represents the low-limit of the number of client. Available value limits from 0 to 127. |
| h3cWIPSAtkDctPolicyCfgGroup | 1.3.6.1.4.1.2011.10.2.118.1.4 | |||
| OCT h3cWIPSAtkDctPolicyCfgSupportSet | 1.3.6.1.4.1.2011.10.2.118.1.4.1 | OCTET STRING | read-only | Represents the bit string of supported attack detect policy. The specific attack detect policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit0: adhoc bit1: ap-spoof bit2: client-spoof bit3: prohibited channel |
| h3cWIPSAtkDctPolicyCfgTable | 1.3.6.1.4.1.2011.10.2.118.1.4.2 | not-accessible | The table defines the parameters for WIPS attack detect policy. | |
| h3cWIPSAtkDctPolicyCfgEntry | 1.3.6.1.4.1.2011.10.2.118.1.4.2.1 | not-accessible | Each entry contains information of each attack detect policy. | |
| OCT h3cWIPSAtkDctPolicyName | 1.3.6.1.4.1.2011.10.2.118.1.4.2.1.1 | OCTET STRING | not-accessible | Represents the name of attack detect policy. |
| ROW h3cWIPSAtkDctPolicyCfgRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.4.2.1.2 | RowStatus | read-create | The status of this table entry. |
| OCT h3cWIPSAtkDctPolicyBitString | 1.3.6.1.4.1.2011.10.2.118.1.4.2.1.3 | OCTET STRING | read-create | Represents the bit string of attack detect policy configuration. The specific attack detect policy is enabled if its corresponding bit is set to 1; disabled if its corresponding bit is set to 0. bit0: adhoc bit1: ap-spoof bit2: client-spoof bit3: prohibited channel |
| h3cWIPSStaticCtmListCfgTable | 1.3.6.1.4.1.2011.10.2.118.1.5 | not-accessible | The table provides the MAC address list of devices in the static countermeasure list. | |
| h3cWIPSStaticCtmListCfgEntry | 1.3.6.1.4.1.2011.10.2.118.1.5.1 | not-accessible | Each entry contains information of each MAC address in the static countermeasure list. | |
| MAC h3cWIPSStaticCtmListMAC | 1.3.6.1.4.1.2011.10.2.118.1.5.1.1 | MacAddress | not-accessible | Represents the MAC address in static countermeasure list. |
| ROW h3cWIPSStaticCtmListRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.5.1.2 | RowStatus | read-create | The status of this table entry. |
| h3cWIPSStaticBlockListCfgTable | 1.3.6.1.4.1.2011.10.2.118.1.6 | not-accessible | The table provides the MAC address list of devices in the static block list. WIPS will ignore the frames from the devices in the list, and take the devices as rogue devices. | |
| h3cWIPSStaticBlockListCfgEntry | 1.3.6.1.4.1.2011.10.2.118.1.6.1 | not-accessible | Each entry contains information of each MAC address in the static block list. | |
| MAC h3cWIPSStaticBlockListMAC | 1.3.6.1.4.1.2011.10.2.118.1.6.1.1 | MacAddress | not-accessible | Represents the MAC address in static block list. |
| ROW h3cWIPSStaticBlockListRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.6.1.2 | RowStatus | read-create | The status of this table entry. |
| h3cWIPSStaticTrustListCfgTable | 1.3.6.1.4.1.2011.10.2.118.1.7 | not-accessible | The table provides the MAC address list of devices in the static trust list. WIPS will take the devices in the list as authorized devices. | |
| h3cWIPSStaticTrustListCfgEntry | 1.3.6.1.4.1.2011.10.2.118.1.7.1 | not-accessible | Each entry contains information of each MAC address in the static trust list. | |
| MAC h3cWIPSStaticTrustListMAC | 1.3.6.1.4.1.2011.10.2.118.1.7.1.1 | MacAddress | not-accessible | Represents the MAC address in static trust list. |
| ROW h3cWIPSStaticTrustListRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.7.1.2 | RowStatus | read-create | The status of this table entry. |
| h3cWIPSIgnoreListCfgTable | 1.3.6.1.4.1.2011.10.2.118.1.8 | not-accessible | The table provides the MAC address list of devices in the ignore list. WIPS will ignore the events caused by the device in the list. | |
| h3cWIPSIgnoreListCfgEntry | 1.3.6.1.4.1.2011.10.2.118.1.8.1 | not-accessible | Each entry contains information of each MAC address in the ignore list. | |
| MAC h3cWIPSIgnoreListMAC | 1.3.6.1.4.1.2011.10.2.118.1.8.1.1 | MacAddress | not-accessible | Represents the MAC address in ignore list. |
| ROW h3cWIPSIgnoreListRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.8.1.2 | RowStatus | read-create | The status of this table entry. |
| h3cWIPSDctModeTable | 1.3.6.1.4.1.2011.10.2.118.1.9 | not-accessible | The table represents the list of AP scanning mode configuration on radio. | |
| h3cWIPSDctModeEntry | 1.3.6.1.4.1.2011.10.2.118.1.9.1 | not-accessible | Each entry contains information of WIPS scanning mode on radio. | |
| OCT h3cWIPSDctModeAPName | 1.3.6.1.4.1.2011.10.2.118.1.9.1.1 | OCTET STRING | not-accessible | Represents the name of AP. |
| I32 h3cWIPSDctModeRadio | 1.3.6.1.4.1.2011.10.2.118.1.9.1.2 | Integer32 | not-accessible | Represents the radio of AP. |
| INT h3cWIPSDctModeScanMode | 1.3.6.1.4.1.2011.10.2.118.1.9.1.3 | INTEGER | read-create | Represents the scanning mode. The radio enable-disable status must be disabled before WIPS scanning mode is configured on this radio. The mesh feature must be disabled before any WIPS scanning mode is set on radio. This radio can not apply any service template before the detectOnly scanning mode is set on the radio. |
| ROW h3cWIPSDctModeRowStatus | 1.3.6.1.4.1.2011.10.2.118.1.9.1.4 | RowStatus | read-create | The status of this table entry. |
| h3cWIPSDetectGroup | 1.3.6.1.4.1.2011.10.2.118.2 | |||
| h3cWIPSDctAPTable | 1.3.6.1.4.1.2011.10.2.118.2.1 | not-accessible | The table represents the list of possible BSS information for APs detected by the WIPS. | |
| h3cWIPSDctAPEntry | 1.3.6.1.4.1.2011.10.2.118.2.1.1 | not-accessible | Each entry contains possible BSS information of each AP detected by WIPS. | |
| OCT h3cWIPSDctAPVSD | 1.3.6.1.4.1.2011.10.2.118.2.1.1.1 | OCTET STRING | not-accessible | Represents the virtual security domain where the BSS was detected. |
| MAC h3cWIPSDctAPBSSID | 1.3.6.1.4.1.2011.10.2.118.2.1.1.2 | MacAddress | not-accessible | Represents the Basic Service Set. |
| TIK h3cWIPSDctAPRunningTime | 1.3.6.1.4.1.2011.10.2.118.2.1.1.3 | TimeTicks | read-only | Represents the time since AP started to work, which is got from beacon/probe response frame. |
| TIK h3cWIPSDctAPRunTmLastUpdateTm | 1.3.6.1.4.1.2011.10.2.118.2.1.1.4 | TimeTicks | read-only | Represents the time update h3cWIPSDctAPRunningTime since system is up. |
| T/F h3cWIPSDctAPIsCountered | 1.3.6.1.4.1.2011.10.2.118.2.1.1.5 | TruthValue | read-only | Represents whether the detected AP is countered by WIPS. |
| H3C h3cWIPSDctAPWorkChannel | 1.3.6.1.4.1.2011.10.2.118.2.1.1.6 | H3cWIPSChannel | read-only | Represents the radio channel which the detected AP work on. |
| H3C h3cWIPSDctAPRadioType | 1.3.6.1.4.1.2011.10.2.118.2.1.1.7 | H3cWIPSRadioType | read-only | Represents the radio type used by the detected AP. |
| H3C h3cWIPSDctAPAuthMethod | 1.3.6.1.4.1.2011.10.2.118.2.1.1.8 | H3cWIPSAuthMethod | read-only | Represents the authentication method used by the detected AP. none(1) - No key management mode configured, psk(2) - pre-shared key authentication, dot1x(3) - 802.1x authentication. other(4) - other authentication. |
| H3C h3cWIPSDctAPEncryptMethod | 1.3.6.1.4.1.2011.10.2.118.2.1.1.9 | H3cWIPSEncryptMethod | read-only | Represents the encrypt method used by the detected AP. none(1) - clear text or no cipher method is configure, wep(2) - WEP key, tkip(4) - WPA Temporal Key encryption, ccmp(8) - WPA AES CCMP encryption |
| H3C h3cWIPSDctAPSecurity | 1.3.6.1.4.1.2011.10.2.118.2.1.1.10 | H3cWIPSAPSecurityType | read-only | Represents the security suites of the detected AP. clear 0x01 wpa2 0x02 wpa 0x04 wep 0x08 |
| U32 h3cWIPSDctAPSeverityLevel | 1.3.6.1.4.1.2011.10.2.118.2.1.1.11 | Unsigned32 | read-only | Represents the severity level of the detected AP. |
| TIK h3cWIPSDctAPLastDctTm | 1.3.6.1.4.1.2011.10.2.118.2.1.1.12 | TimeTicks | read-only | Represents the time that AP was detected for the last time since system is up. |
| TIK h3cWIPSDctAPFirstDctTm | 1.3.6.1.4.1.2011.10.2.118.2.1.1.13 | TimeTicks | read-only | Represents the time that AP was detected for the first time since system is up. |
| T/F h3cWIPSDctAPAdd2BlackList | 1.3.6.1.4.1.2011.10.2.118.2.1.1.14 | TruthValue | read-write | Represents whether the AP will be taken as a rogue AP. If the value is true, the MAC address will be automatically added into h3cWIPSBlockListTable and the category of the AP will be taken as rogue. If the value is false, nothing will be done. It will return false for get operation. |
| T/F h3cWIPSDctAPAdd2WhiteList | 1.3.6.1.4.1.2011.10.2.118.2.1.1.15 | TruthValue | read-write | Represents whether the AP will be taken as an authorized AP. If the value is true, the MAC address will be automatically added into h3cWIPSTrustListTable. If the value is false, nothing will be done. It will return false for get operation. |
| T/F h3cWIPSDctAPAdd2IgnoreList | 1.3.6.1.4.1.2011.10.2.118.2.1.1.16 | TruthValue | read-write | Represents whether the AP will be taken as an ignored AP. If the value is true, the MAC address will be automatically added into h3cWIPSIgnoreListTable. If the value is false, nothing will be done. It will return false for get operation. |
| T/F h3cWIPSDctAPAdd2CtmList | 1.3.6.1.4.1.2011.10.2.118.2.1.1.17 | TruthValue | read-write | Represents whether the AP will be taken as a countered AP. If the value is true, the MAC address will be automatically added into h3cWIPSCountermeasureListTable. If the value is false, nothing will be done. It will return false for get operation. |
| H3C h3cWIPSDctAPCategory | 1.3.6.1.4.1.2011.10.2.118.2.1.1.18 | H3cWIPSAPCategoryType | read-write | Represents the categorized result of the AP. For set operation, only the following values are valid: authorized(2),rogue(3),misconfigured(4),external(5) |
| H3C h3cWIPSDctAPCategoryWay | 1.3.6.1.4.1.2011.10.2.118.2.1.1.19 | H3cWIPSDevCategoryWay | read-write | Represents by which way the AP is categorized. manual(1) -categorized by user autoByNMS(2) -categorized by NMS(Network Management System) autoByDev(3) -categorized by WIPS |
| H3C h3cWIPSDctAPStatus | 1.3.6.1.4.1.2011.10.2.118.2.1.1.20 | H3cWIPSDevStatus | read-only | Represents the status of the AP detected by WIPS. |
| OCT h3cWIPSDctAPSSID | 1.3.6.1.4.1.2011.10.2.118.2.1.1.21 | OCTET STRING | read-only | Represents the SSID broadcasted by AP. |
| I32 h3cWIPSDctAPAttachStaNum | 1.3.6.1.4.1.2011.10.2.118.2.1.1.22 | Integer32 | read-only | Represents the number of clients associated with the detected AP. |
| I32 h3cWIPSDctAPRptSensorNum | 1.3.6.1.4.1.2011.10.2.118.2.1.1.23 | Integer32 | read-only | Represents the number of sensors detecting the AP. |
| h3cWIPSDctAPAttachStaTable | 1.3.6.1.4.1.2011.10.2.118.2.2 | not-accessible | The table represents the list of station associated with APs detected by the WIPS. | |
| h3cWIPSDctAPAttachStaEntry | 1.3.6.1.4.1.2011.10.2.118.2.2.1 | not-accessible | Each entry contains possible station information detected by WIPS. | |
| MAC h3cWIPSDctAPAttachStaMac | 1.3.6.1.4.1.2011.10.2.118.2.2.1.1 | MacAddress | not-accessible | Represents the MAC address of station associated with AP. |
| ROW h3cWIPSDctAPAttachStaRowStatus | 1.3.6.1.4.1.2011.10.2.118.2.2.1.2 | RowStatus | read-only | The status of this table entry. It will return false for set operation. |
| h3cWIPSDctAPRptSensorTable | 1.3.6.1.4.1.2011.10.2.118.2.3 | not-accessible | The table represents the list of sensors. | |
| h3cWIPSDctAPRptSensorEntry | 1.3.6.1.4.1.2011.10.2.118.2.3.1 | not-accessible | Each entry contains possible sensor information of WIPS. | |
| OCT h3cWIPSDctAPRptSensorName | 1.3.6.1.4.1.2011.10.2.118.2.3.1.1 | OCTET STRING | not-accessible | Represents the name of sensor. |
| I32 h3cWIPSDctAPRptSensorRadioId | 1.3.6.1.4.1.2011.10.2.118.2.3.1.2 | Integer32 | read-only | Represents on which radio the sensor AP detected the AP. |
| I32 h3cWIPSDctAPRptRSSI | 1.3.6.1.4.1.2011.10.2.118.2.3.1.3 | Integer32 | read-only | Represents the current value of signal strength that WIPS sensor AP received from the AP. |
| TIK h3cWIPSDctAPLastRptTm | 1.3.6.1.4.1.2011.10.2.118.2.3.1.4 | TimeTicks | read-only | Represents the time that AP was detected by this sensor for the last time since system is up. |
| h3cWIPSDctStaTable | 1.3.6.1.4.1.2011.10.2.118.2.4 | not-accessible | The table represents the list of possible information for stations detected by the WIPS. | |
| h3cWIPSDctStaEntry | 1.3.6.1.4.1.2011.10.2.118.2.4.1 | not-accessible | Each entry contains possible station information of each station detected by WIPS. | |
| OCT h3cWIPSDctStaVSD | 1.3.6.1.4.1.2011.10.2.118.2.4.1.1 | OCTET STRING | not-accessible | Represents the virtual security domain in which the station was detected. |
| MAC h3cWIPSDctStaMac | 1.3.6.1.4.1.2011.10.2.118.2.4.1.2 | MacAddress | not-accessible | Represents the MAC address of station. |
| MAC h3cWIPSDctStaAssocBSSID | 1.3.6.1.4.1.2011.10.2.118.2.4.1.3 | MacAddress | read-only | Represents the BSSID which station associates with. |
| H3C h3cWIPSDctStaStatus | 1.3.6.1.4.1.2011.10.2.118.2.4.1.4 | H3cWIPSDevStatus | read-only | Represents the status of this station detected by WIPS. |
| H3C h3cWIPSDctStaCategory | 1.3.6.1.4.1.2011.10.2.118.2.4.1.5 | H3cWIPSClientCategoryType | read-only | Represents the categorized result of the station. |
| H3C h3cWIPSDctStaRadioType | 1.3.6.1.4.1.2011.10.2.118.2.4.1.6 | H3cWIPSRadioType | read-only | Represents the radio type used by the detected station. |
| H3C h3cWIPSDctStaWorkChannel | 1.3.6.1.4.1.2011.10.2.118.2.4.1.7 | H3cWIPSChannel | read-only | Represents on which radio channel that WIPS sensor AP detected the station. |
| T/F h3cWIPSDctStaIsCountered | 1.3.6.1.4.1.2011.10.2.118.2.4.1.8 | TruthValue | read-only | Represents whether the detected station is countered by WIPS. |
| T/F h3cWIPSDctStaAdd2BlackList | 1.3.6.1.4.1.2011.10.2.118.2.4.1.9 | TruthValue | read-write | Represents whether the station will be taken as a rogue station. If the value is true, the MAC address will be automatically added into h3cWIPSBlockListTable and the category of the station will be taken as rogue. If the value is false, nothing will be done. It will return false for get operation. |
| T/F h3cWIPSDctStaAdd2WhiteList | 1.3.6.1.4.1.2011.10.2.118.2.4.1.10 | TruthValue | read-write | Represents whether the station will be taken as an authorized station. If the value is true, the MAC address will be automatically added into h3cWIPSTrustListTable. If the value is false, nothing will be done. It will return false for get operation. |
| T/F h3cWIPSDctStaAdd2IgnoreList | 1.3.6.1.4.1.2011.10.2.118.2.4.1.11 | TruthValue | read-write | Represents whether the station will be taken as an ignored station. If the value is true, the MAC address will be automatically added into h3cWIPSIgnoreListTable. If the value is false, nothing will be done. It will return false for get operation. |
| T/F h3cWIPSDctStaAdd2CtmList | 1.3.6.1.4.1.2011.10.2.118.2.4.1.12 | TruthValue | read-write | Represents whether the station will be taken as a countered station. If the value is true, the MAC address will be automatically added into h3cWIPSCountermeasureListTable. If the value is false, nothing will be done. It will return false for get operation. |
| TIK h3cWIPSDctStaFirstDctTm | 1.3.6.1.4.1.2011.10.2.118.2.4.1.13 | TimeTicks | read-only | Represents the time that station was detected for the first time since system is up. |
| TIK h3cWIPSDctStaLastDctTm | 1.3.6.1.4.1.2011.10.2.118.2.4.1.14 | TimeTicks | read-only | Represents the time that station was detected for the last time since system is up. |
| I32 h3cWIPSDctStaRptSensorNum | 1.3.6.1.4.1.2011.10.2.118.2.4.1.15 | Integer32 | read-only | Represents the number of sensors detecting the station. |
| INT h3cWIPSDctStaState | 1.3.6.1.4.1.2011.10.2.118.2.4.1.16 | INTEGER | read-only | Represents the authentication state of station with AP. |
| h3cWIPSDctStaRptSensorTable | 1.3.6.1.4.1.2011.10.2.118.2.5 | not-accessible | The table represents the list of sensors detecting the station. | |
| h3cWIPSDctStaRptSensorEntry | 1.3.6.1.4.1.2011.10.2.118.2.5.1 | not-accessible | Each entry contains possible sensor information of WIPS. | |
| OCT h3cWIPSDctStaRtpSensorName | 1.3.6.1.4.1.2011.10.2.118.2.5.1.1 | OCTET STRING | not-accessible | Represents the name of sensor. |
| I32 h3cWIPSDctStaRptSensorRadioId | 1.3.6.1.4.1.2011.10.2.118.2.5.1.2 | Integer32 | read-only | Represents on which radio the sensor AP detected the station. |
| I32 h3cWIPSDctStaRptRSSI | 1.3.6.1.4.1.2011.10.2.118.2.5.1.3 | Integer32 | read-only | Represents the current value of signal strength that WIPS sensor AP received from the station. |
| TIK h3cWIPSDctStaLastRptTm | 1.3.6.1.4.1.2011.10.2.118.2.5.1.4 | TimeTicks | read-only | Represents the time that station was detected by this sensor for the last time since system is up. |
| h3cWIPSDctSSIDTable | 1.3.6.1.4.1.2011.10.2.118.2.6 | not-accessible | The table represents the list of possible ESS information for networks detected by WIPS. | |
| h3cWIPSDctSSIDEntry | 1.3.6.1.4.1.2011.10.2.118.2.6.1 | not-accessible | Each entry contains possible ESS information of each ESS detected by WIPS. | |
| OCT h3cWIPSDctNetworkVSD | 1.3.6.1.4.1.2011.10.2.118.2.6.1.1 | OCTET STRING | not-accessible | Represents the virtual security domain in which the ESS was detected. |
| OCT h3cWIPSDctNetworkSSID | 1.3.6.1.4.1.2011.10.2.118.2.6.1.2 | OCTET STRING | not-accessible | Represents the service set identifier for the ESS. Using the ASCII value '1' represents that the SSID is not advertised in the beacon frames. |
| U32 h3cWIPSDctNetworkCfg | 1.3.6.1.4.1.2011.10.2.118.2.6.1.3 | Unsigned32 | not-accessible | Represents the encrypt method, security suite and authentication method which are used by the detected ESS. The lowest 8 bits mean encrypt method. The higher 8 bits mean security suite. The third 8 bits stand for authentication method. The higerest 8 bits are reserved. The meaning is shown as follows: 31 23 15 7 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + | reserved | auth method | security suite|encryptmethod| + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + For encrypt method, the following values are supported: 1: none - clear text or no cipher method is configure, 2: wep - WEP key, 4: tkip - WPA Temporal Key encryption, 8: ccmp - WPA AES CCMP encryption For security suite, the following values are supported: 0x01: clear 0x02: wpa2 0x04: wpa 0x08: wep For authentication method, the following values are supported: 1: none - No key management mode configured, 2: psk - pre-shared key authentication, 3: dot1x - 802.1x authentication. 4: other - other authentication |
| TIK h3cWIPSDctNetworkFirstRptTm | 1.3.6.1.4.1.2011.10.2.118.2.6.1.4 | TimeTicks | read-only | Represents the time that ESS was detected for the first time since system is up. |
| TIK h3cWIPSDctNetworkLastRptTm | 1.3.6.1.4.1.2011.10.2.118.2.6.1.5 | TimeTicks | read-only | Represents the time that ESS was detected for the last time since system is up. |
| H3C h3cWIPSDctNetworkStatus | 1.3.6.1.4.1.2011.10.2.118.2.6.1.6 | H3cWIPSDevStatus | read-only | Represents the status of this ESS detected by WIPS. |
| T/F h3cWIPSDctNetworkSSIDHide | 1.3.6.1.4.1.2011.10.2.118.2.6.1.7 | TruthValue | read-only | Represents whether the ESS broadcasted its SSID. |
| I32 h3cWIPSDctNetworkBSSNum | 1.3.6.1.4.1.2011.10.2.118.2.6.1.8 | Integer32 | read-only | Represents the number of APs using the same SSID in the ESS. |
| h3cWIPSDctSSIDBSSTable | 1.3.6.1.4.1.2011.10.2.118.2.7 | not-accessible | The table represents the list of APs using the same SSID in the ESS. | |
| h3cWIPSDctSSIDBSSEntry | 1.3.6.1.4.1.2011.10.2.118.2.7.1 | not-accessible | Each entry contains possible BSS information of each AP detected by WIPS. | |
| MAC h3cWIPSDctNetworkBSSID | 1.3.6.1.4.1.2011.10.2.118.2.7.1.1 | MacAddress | not-accessible | Represents the Basic Service Set. |
| H3C h3cWIPSDctNetworkBSSWorkChl | 1.3.6.1.4.1.2011.10.2.118.2.7.1.2 | H3cWIPSChannel | read-only | Represents on which radio channel that WIPS sensor AP detected the BSS. |
| I32 h3cWIPSDctNetworkBSSStaNum | 1.3.6.1.4.1.2011.10.2.118.2.7.1.3 | Integer32 | read-only | Represents the number of clients associated with the detected BSS. |
| h3cWIPSBlockListTable | 1.3.6.1.4.1.2011.10.2.118.2.8 | not-accessible | The table represents the list of block device MAC address. | |
| h3cWIPSBlockListEntry | 1.3.6.1.4.1.2011.10.2.118.2.8.1 | not-accessible | Each entry contains block device MAC address information. | |
| MAC h3cWIPSBlockListMacAddress | 1.3.6.1.4.1.2011.10.2.118.2.8.1.1 | MacAddress | not-accessible | Represents the MAC address of block device. |
| INT h3cWIPSBlockListStatus | 1.3.6.1.4.1.2011.10.2.118.2.8.1.2 | INTEGER | read-only | Represents the status of block device. |
| h3cWIPSChannelTable | 1.3.6.1.4.1.2011.10.2.118.2.9 | not-accessible | The table represents the list of channel information. | |
| h3cWIPSChannelEntry | 1.3.6.1.4.1.2011.10.2.118.2.9.1 | not-accessible | Each entry contains channel information. | |
| H3C h3cWIPSChannelNum | 1.3.6.1.4.1.2011.10.2.118.2.9.1.1 | H3cWIPSChannel | not-accessible | Represents the channel number. |
| H3C h3cWIPSChannelRadioType | 1.3.6.1.4.1.2011.10.2.118.2.9.1.2 | H3cWIPSRadioType | read-only | Represents the radio type used in the specific channel. |
| T/F h3cWIPSChannelIsPermitted | 1.3.6.1.4.1.2011.10.2.118.2.9.1.3 | TruthValue | read-only | Represents whether the channel is permitted. |
| TIK h3cWIPSChannelLastRptTm | 1.3.6.1.4.1.2011.10.2.118.2.9.1.4 | TimeTicks | read-only | Represents the latest time that detecting the channel is active. |
| h3cWIPSCountermeasureListTable | 1.3.6.1.4.1.2011.10.2.118.2.10 | not-accessible | The table represents the list of countermeasure device information. | |
| h3cWIPSCountermeasureListEntry | 1.3.6.1.4.1.2011.10.2.118.2.10.1 | not-accessible | Each entry contains countermeasure device information. | |
| MAC h3cWIPSCtmListMacAddress | 1.3.6.1.4.1.2011.10.2.118.2.10.1.1 | MacAddress | not-accessible | Represents the MAC address of the countered device. |
| H3C h3cWIPSCtmListLastestWorkChl | 1.3.6.1.4.1.2011.10.2.118.2.10.1.2 | H3cWIPSChannel | read-only | Represents the channel on which the countermeasure device was working. |
| TIK h3cWIPSCtmListFirstTm | 1.3.6.1.4.1.2011.10.2.118.2.10.1.3 | TimeTicks | read-only | Represents the first time that the device was countered since system is up. |
| TIK h3cWIPSCtmListLastTm | 1.3.6.1.4.1.2011.10.2.118.2.10.1.4 | TimeTicks | read-only | Represents the last time that the device was countered since system is up. |
| I32 h3cWIPSCtmListQurCnt | 1.3.6.1.4.1.2011.10.2.118.2.10.1.5 | Integer32 | read-only | Represents how many times that the device was countered. |
| I32 h3cWIPSCtmListSensorNum | 1.3.6.1.4.1.2011.10.2.118.2.10.1.6 | Integer32 | read-only | Represents the number of sensors detecting the device. |
| h3cWIPSIgnoreListTable | 1.3.6.1.4.1.2011.10.2.118.2.11 | not-accessible | The table represents the list of ignored device information. | |
| h3cWIPSIgnoreListEntry | 1.3.6.1.4.1.2011.10.2.118.2.11.1 | not-accessible | Each entry contains ignored device information. | |
| MAC h3cWIPSIgnoreListMacAddress | 1.3.6.1.4.1.2011.10.2.118.2.11.1.1 | MacAddress | not-accessible | Represents the MAC address of the ignored device. |
| TIK h3cWIPSIgnoreListFirstIgnoreTm | 1.3.6.1.4.1.2011.10.2.118.2.11.1.2 | TimeTicks | read-only | Represents the first time when the event caused by the device was ignored since system is up. |
| TIK h3cWIPSIgnoreListLastIgnoreTm | 1.3.6.1.4.1.2011.10.2.118.2.11.1.3 | TimeTicks | read-only | Represents the last time when the event caused by the device was ignored since system is up. |
| I32 h3cWIPSIgnoreListIgnoreCnt | 1.3.6.1.4.1.2011.10.2.118.2.11.1.4 | Integer32 | read-only | Represents the number of times of the event caused by device has been ignored. |
| h3cWIPSTrustListTable | 1.3.6.1.4.1.2011.10.2.118.2.12 | not-accessible | The table represents the list of trust device information. | |
| h3cWIPSTrustListEntry | 1.3.6.1.4.1.2011.10.2.118.2.12.1 | not-accessible | Each entry contains information of a trust device. | |
| MAC h3cWIPSTrustListMacAddress | 1.3.6.1.4.1.2011.10.2.118.2.12.1.1 | MacAddress | not-accessible | Represents the MAC address of the trust device. |
| INT h3cWIPSTrustListStatus | 1.3.6.1.4.1.2011.10.2.118.2.12.1.2 | INTEGER | read-only | Represents the status of the trust device. |
| h3cWIPSChlStatTable | 1.3.6.1.4.1.2011.10.2.118.2.13 | not-accessible | The table represents the list of channel statistics information. | |
| h3cWIPSChlStatEntry | 1.3.6.1.4.1.2011.10.2.118.2.13.1 | not-accessible | Each entry contains information of channel statistics. | |
| MAC h3cWIPSChlStatSensorMacAddr | 1.3.6.1.4.1.2011.10.2.118.2.13.1.1 | MacAddress | not-accessible | Represents the MAC address of sensor. |
| H3C h3cWIPSChlStatChannel | 1.3.6.1.4.1.2011.10.2.118.2.13.1.2 | H3cWIPSChannel | not-accessible | Represents the statistics channel. |
| C64 h3cWIPSChlStatTotalPktEx | 1.3.6.1.4.1.2011.10.2.118.2.13.1.3 | Counter64 | read-only | Represents the count of total frames in the channel. |
| C64 h3cWIPSChlStatTotalByte | 1.3.6.1.4.1.2011.10.2.118.2.13.1.4 | Counter64 | read-only | Represents the length of total frames in the channel. |
| C64 h3cWIPSChlStatBmcastPkt | 1.3.6.1.4.1.2011.10.2.118.2.13.1.5 | Counter64 | read-only | Represents the count of broadcast and multicast frames in the channel. |
| C64 h3cWIPSChlStatBmcastByte | 1.3.6.1.4.1.2011.10.2.118.2.13.1.6 | Counter64 | read-only | Represents the total length of broadcast and multicast frames in the channel. |
| C64 h3cWIPSChlStatUnicastPkt | 1.3.6.1.4.1.2011.10.2.118.2.13.1.7 | Counter64 | read-only | Represents the count of unicast frames in the channel. |
| C64 h3cWIPSChlStatUnicastByte | 1.3.6.1.4.1.2011.10.2.118.2.13.1.8 | Counter64 | read-only | Represents the total length of unicast frames in the channel. |
| C64 h3cWIPSChlStatManagement | 1.3.6.1.4.1.2011.10.2.118.2.13.1.9 | Counter64 | read-only | Represents the count of management frames in the channel. |
| C64 h3cWIPSChlStatControl | 1.3.6.1.4.1.2011.10.2.118.2.13.1.10 | Counter64 | read-only | Represents the count of control frames in the channel. |
| C64 h3cWIPSChlStatData | 1.3.6.1.4.1.2011.10.2.118.2.13.1.11 | Counter64 | read-only | Represents the count of data frames in the channel. |
| C64 h3cWIPSChlStatBeacon | 1.3.6.1.4.1.2011.10.2.118.2.13.1.12 | Counter64 | read-only | Represents the count of beacon frames in the channel. |
| C64 h3cWIPSChlStatRTS | 1.3.6.1.4.1.2011.10.2.118.2.13.1.13 | Counter64 | read-only | Represents the count of RTS frames in the channel. |
| C64 h3cWIPSChlStatCTS | 1.3.6.1.4.1.2011.10.2.118.2.13.1.14 | Counter64 | read-only | Represents the count of CTS frames in the channel. |
| C64 h3cWIPSChlStatProbeRequest | 1.3.6.1.4.1.2011.10.2.118.2.13.1.15 | Counter64 | read-only | Represents the count of probe request frames in the channel. |
| C64 h3cWIPSChlStatProbeResponse | 1.3.6.1.4.1.2011.10.2.118.2.13.1.16 | Counter64 | read-only | Represents the count of probe response frames in the channel. |
| C64 h3cWIPSChlStatFragment | 1.3.6.1.4.1.2011.10.2.118.2.13.1.17 | Counter64 | read-only | Represents the count of fragment frames in the channel. |
| C64 h3cWIPSChlStatRetry | 1.3.6.1.4.1.2011.10.2.118.2.13.1.18 | Counter64 | read-only | Represents the count of retry frames in the channel. |
| C64 h3cWIPSChlStatEapSuccess | 1.3.6.1.4.1.2011.10.2.118.2.13.1.19 | Counter64 | read-only | Represents the count of EAP-Success frames in the channel. |
| C64 h3cWIPSChlStatEapFailure | 1.3.6.1.4.1.2011.10.2.118.2.13.1.20 | Counter64 | read-only | Represents the count of EAP-Failure frames in the channel. |
| C64 h3cWIPSChlStatEapolStart | 1.3.6.1.4.1.2011.10.2.118.2.13.1.21 | Counter64 | read-only | Represents the count of EAPOL-Start frames in the channel. |
| C64 h3cWIPSChlStatEapolLogoff | 1.3.6.1.4.1.2011.10.2.118.2.13.1.22 | Counter64 | read-only | Represents the count of EAPOL-Logoff frames in the channel. |
| C64 h3cWIPSChlStatAssocRequest | 1.3.6.1.4.1.2011.10.2.118.2.13.1.23 | Counter64 | read-only | Represents the count of association request frames in the channel. |
| C64 h3cWIPSChlStatAssocResponse | 1.3.6.1.4.1.2011.10.2.118.2.13.1.24 | Counter64 | read-only | Represents the count of association response frames in the channel. |
| C64 h3cWIPSChlStatUnicastDisassoc | 1.3.6.1.4.1.2011.10.2.118.2.13.1.25 | Counter64 | read-only | Represents the count of unicast disassociation frames in the channel. |
| C64 h3cWIPSChlStatBroadcastDisassoc | 1.3.6.1.4.1.2011.10.2.118.2.13.1.26 | Counter64 | read-only | Represents the count of broadcast disassociation frames in the channel. |
| C64 h3cWIPSChlStatAuthentication | 1.3.6.1.4.1.2011.10.2.118.2.13.1.27 | Counter64 | read-only | Represents the count of authentication frames in the channel. |
| C64 h3cWIPSChlStatUnicastDeauthen | 1.3.6.1.4.1.2011.10.2.118.2.13.1.28 | Counter64 | read-only | Represents the count of unicast deauthentication frames in the channel. |
| C64 h3cWIPSChlStatBroadcastDeauthen | 1.3.6.1.4.1.2011.10.2.118.2.13.1.29 | Counter64 | read-only | Represents the count of broadcast deauthentication frames in the channel. |
| C64 h3cWIPSChlStatMalformed | 1.3.6.1.4.1.2011.10.2.118.2.13.1.30 | Counter64 | read-only | Represents the count of malformed frames in the channel. |
| h3cWIPSDevStatTable | 1.3.6.1.4.1.2011.10.2.118.2.14 | not-accessible | The table represents the list of device statistics information. | |
| h3cWIPSDevStatEntry | 1.3.6.1.4.1.2011.10.2.118.2.14.1 | not-accessible | Each entry contains information of device statistics. | |
| MAC h3cWIPSDevStatSensorMacAddr | 1.3.6.1.4.1.2011.10.2.118.2.14.1.1 | MacAddress | not-accessible | Represents the MAC address of sensor. |
| MAC h3cWIPSDevStatDevMacAddress | 1.3.6.1.4.1.2011.10.2.118.2.14.1.2 | MacAddress | not-accessible | Represents the MAC address of the device detected by the sensor. |
| H3C h3cWIPSDevStatChannel | 1.3.6.1.4.1.2011.10.2.118.2.14.1.3 | H3cWIPSChannel | not-accessible | Represents the device working channel. |
| C64 h3cWIPSDevStatTxTotalPkt | 1.3.6.1.4.1.2011.10.2.118.2.14.1.4 | Counter64 | read-only | Represents the count of total frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxTotalByte | 1.3.6.1.4.1.2011.10.2.118.2.14.1.5 | Counter64 | read-only | Represents the length of total frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxBMcastPkt | 1.3.6.1.4.1.2011.10.2.118.2.14.1.6 | Counter64 | read-only | Represents the count of broadcast and multicast frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxBMcastByte | 1.3.6.1.4.1.2011.10.2.118.2.14.1.7 | Counter64 | read-only | Represents the length of broadcast and multicast frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxUnicastPkt | 1.3.6.1.4.1.2011.10.2.118.2.14.1.8 | Counter64 | read-only | Represents the count of unicast frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxUnicastByte | 1.3.6.1.4.1.2011.10.2.118.2.14.1.9 | Counter64 | read-only | Represents the length of unicast frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxMgmt | 1.3.6.1.4.1.2011.10.2.118.2.14.1.10 | Counter64 | read-only | Represents the count of management frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxCtrl | 1.3.6.1.4.1.2011.10.2.118.2.14.1.11 | Counter64 | read-only | Represents the count of control frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxData | 1.3.6.1.4.1.2011.10.2.118.2.14.1.12 | Counter64 | read-only | Represents the count of data frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxBeacon | 1.3.6.1.4.1.2011.10.2.118.2.14.1.13 | Counter64 | read-only | Represents the count of beacon frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxRTS | 1.3.6.1.4.1.2011.10.2.118.2.14.1.14 | Counter64 | read-only | Represents the count of RTS frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxProbeRequest | 1.3.6.1.4.1.2011.10.2.118.2.14.1.15 | Counter64 | read-only | Represents the count of probe frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxProbeResponse | 1.3.6.1.4.1.2011.10.2.118.2.14.1.16 | Counter64 | read-only | Represents the count of probe response frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxFragment | 1.3.6.1.4.1.2011.10.2.118.2.14.1.17 | Counter64 | read-only | Represents the count of fragment frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxRetry | 1.3.6.1.4.1.2011.10.2.118.2.14.1.18 | Counter64 | read-only | Represents the count of retry frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxAssocRequest | 1.3.6.1.4.1.2011.10.2.118.2.14.1.19 | Counter64 | read-only | Represents the count of association request frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxAssocResponse | 1.3.6.1.4.1.2011.10.2.118.2.14.1.20 | Counter64 | read-only | Represents the count of association response frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxUnicastDisassoc | 1.3.6.1.4.1.2011.10.2.118.2.14.1.21 | Counter64 | read-only | Represents the count of unicast disassociation frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxBcastDisassoc | 1.3.6.1.4.1.2011.10.2.118.2.14.1.22 | Counter64 | read-only | Represents the count of broadcast disassociation frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxAuth | 1.3.6.1.4.1.2011.10.2.118.2.14.1.23 | Counter64 | read-only | Represents the count of authentication frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxUnicastDeauth | 1.3.6.1.4.1.2011.10.2.118.2.14.1.24 | Counter64 | read-only | Represents the count of unicast deauthentication frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxBcastDeauth | 1.3.6.1.4.1.2011.10.2.118.2.14.1.25 | Counter64 | read-only | Represents the count of broadcast deauthentication frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxEAPSuccess | 1.3.6.1.4.1.2011.10.2.118.2.14.1.26 | Counter64 | read-only | Represents the count of EAP-Success frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxEAPFailure | 1.3.6.1.4.1.2011.10.2.118.2.14.1.27 | Counter64 | read-only | Represents the count of EAP-Failure frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxEAPOLStart | 1.3.6.1.4.1.2011.10.2.118.2.14.1.28 | Counter64 | read-only | Represents the count of EAPOL-Start frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxEAPOLLogOff | 1.3.6.1.4.1.2011.10.2.118.2.14.1.29 | Counter64 | read-only | Represents the count of EAPOL-Logoff frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatTxMalformed | 1.3.6.1.4.1.2011.10.2.118.2.14.1.30 | Counter64 | read-only | Represents the count of malformed frames transmitted by the device in one channel. |
| C64 h3cWIPSDevStatRxTotalPkt | 1.3.6.1.4.1.2011.10.2.118.2.14.1.31 | Counter64 | read-only | Represents the count of total frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxTotalByte | 1.3.6.1.4.1.2011.10.2.118.2.14.1.32 | Counter64 | read-only | Represents the length of total frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxUnicastPkt | 1.3.6.1.4.1.2011.10.2.118.2.14.1.33 | Counter64 | read-only | Represents the count of unicast frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxUnicastByte | 1.3.6.1.4.1.2011.10.2.118.2.14.1.34 | Counter64 | read-only | Represents the length of unicast frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxMgmt | 1.3.6.1.4.1.2011.10.2.118.2.14.1.35 | Counter64 | read-only | Represents the count of management frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxCtrl | 1.3.6.1.4.1.2011.10.2.118.2.14.1.36 | Counter64 | read-only | Represents the count of control frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxData | 1.3.6.1.4.1.2011.10.2.118.2.14.1.37 | Counter64 | read-only | Represents the count of data frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxRTS | 1.3.6.1.4.1.2011.10.2.118.2.14.1.38 | Counter64 | read-only | Represents the count of RTS frames recieved by the device in one channel. |
| C64 h3cWIPSDevStatRxCTS | 1.3.6.1.4.1.2011.10.2.118.2.14.1.39 | Counter64 | read-only | Represents the count of CTS frames recieved by the device in one channel. |
| C64 h3cWIPSDevStatRxProbeRequest | 1.3.6.1.4.1.2011.10.2.118.2.14.1.40 | Counter64 | read-only | Represents the count of probe request frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxProbeResponse | 1.3.6.1.4.1.2011.10.2.118.2.14.1.41 | Counter64 | read-only | Represents the count of probe response frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxFragment | 1.3.6.1.4.1.2011.10.2.118.2.14.1.42 | Counter64 | read-only | Represents the count of fragment frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxRetry | 1.3.6.1.4.1.2011.10.2.118.2.14.1.43 | Counter64 | read-only | Represents the count of retry frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxAssoRequest | 1.3.6.1.4.1.2011.10.2.118.2.14.1.44 | Counter64 | read-only | Represents the count of association request frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxAssoResponse | 1.3.6.1.4.1.2011.10.2.118.2.14.1.45 | Counter64 | read-only | Represents the count of association response frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxDisassoc | 1.3.6.1.4.1.2011.10.2.118.2.14.1.46 | Counter64 | read-only | Represents the count of disassociation frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxAuth | 1.3.6.1.4.1.2011.10.2.118.2.14.1.47 | Counter64 | read-only | Represents the count of authentication frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxDeauth | 1.3.6.1.4.1.2011.10.2.118.2.14.1.48 | Counter64 | read-only | Represents the count of deauthentication frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxEAPSuccess | 1.3.6.1.4.1.2011.10.2.118.2.14.1.49 | Counter64 | read-only | Represents the count of EAP-Success frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxEAPFailure | 1.3.6.1.4.1.2011.10.2.118.2.14.1.50 | Counter64 | read-only | Represents the count of EAP-Failure frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxEAPOLStart | 1.3.6.1.4.1.2011.10.2.118.2.14.1.51 | Counter64 | read-only | Represents the count of EAPOL-Start frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxEAPOLLogoff | 1.3.6.1.4.1.2011.10.2.118.2.14.1.52 | Counter64 | read-only | Represents the count of EAPOL-Logoff frames received by the device in one channel. |
| C64 h3cWIPSDevStatRxMalformed | 1.3.6.1.4.1.2011.10.2.118.2.14.1.53 | Counter64 | read-only | Represents the count of malformed frames received by the device in one channel. |
| h3cWIPSNotifyGroup | 1.3.6.1.4.1.2011.10.2.118.3 |
RFC description
Wireless Intrusion Prevention System (WIPS) MIB for H3C devices to detect and prevent wireless network attacks.
Start monitoring H3C wireless LAN controllers and access points with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.