H3C-EOC-COMMON-MIB

All MIBs › H3C-EOC-COMMON-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2007-09-11

Category: Technology: EPON/PON, Vendor: H3C/HH3C

Description: H3C MIB for Ethernet over Coax (EoC) common objects managing coax-based broadband access networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-EOC-COMMON-MIB?

H3C-EOC-COMMON-MIB is an H3C (Hangzhou Huawei-3Com) enterprise MIB covering common objects shared between Ethernet-over-Coax (EoC) deployments, spanning both EFM/PON-based access (per IEEE 802.3ah clauses 60/64/65) and HomePlug AV-based Ethernet-over-Cable systems used in coax-based broadband access networks. It exposes system identification (software version, uplink MAC address), client authorization/management settings, and bandwidth-provisioning parameters (min/max upstream and downstream bandwidth, high-priority SLA bandwidth) for coax network units (CNUs). It supports monitoring of software version status via h3cEOCCommonSysVersion and operational/administrative state of client devices through the client management table, helping an operator confirm CNUs are authorized and correctly provisioned rather than exposing classic hardware sensors like temperature or fans. It depends on the underlying IEEE 802.3ah EFM/PON and HomePlug AV specifications for its addressing and coax-link concepts. It is typically deployed on H3C broadband access aggregation equipment serving residential or enterprise coax-based last-mile connections. Engineers can download the H3C-EOC-COMMON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-EOC-COMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C broadband access switch/aggregation device
EoC coax network unit (CNU)

Monitoring Examples

An administrator would poll h3cEOCCommonCltManTable entries to see which coax network units (CNUs) are registered and whether h3cEOCCommonCltAutoAuthorize is permitting new clients to join automatically. Bandwidth fields such as h3cEOCComCnuMaxDownBWMinVal/MaxVal and h3cEOCComCnuMaxUpBWMinVal/MaxVal reveal whether a CNU's provisioned bandwidth range matches the service tier it was assigned. A CNU count exceeding h3cEOCCommonCltMaxAllowToAccess would indicate the access port is oversubscribed.

What Can Be Monitored

system software version
uplink MAC address
client authorization status
connected client count vs. maximum allowed
provisioned upstream/downstream bandwidth range
SLA high-priority bandwidth range

Imported Objects

From H3C-HPEOC-MIB

h3cHPEOCDownLoadCNUFWResult

OBJECT-TYPE

From HUAWEI-3COM-OID-MIB

h3cCommon

OBJECT-IDENTITY

From IANAifType-MIB

IANAifType

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using h3cEOCComUniCurrentSpeed OID:

Select an H3C broadband access/aggregation device (Ethernet-over-Coax) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cEOCComUniCurrentSpeed into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports an estimate of the interface's current bandwidth in bits per second. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the rate climbs well above its normal baseline, since a sustained spike often reflects real load growth or a runaway process. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF h3cEOCBandwidthNotEnoughTrap	1.3.6.1.4.1.2011.10.2.83.5.0.8			Bandwidth is not enough, cnu can not bind now.
NTF h3cEOCCLTCablePortErrorTrap	1.3.6.1.4.1.2011.10.2.83.5.0.11			A h3cEOCCLTCablePortErrorTrap notification is sent when the hardware of cable port occurs error or CLT's vlan is configged error.
NTF h3cEOCCLTCablePortErrReTrap	1.3.6.1.4.1.2011.10.2.83.5.0.12			A h3cEOCCLTCablePortErrReTrap notification is sent when cable port error and then recovered.
NTF h3cEOCCnuAttenuationTrap	1.3.6.1.4.1.2011.10.2.83.5.0.9			A h3cHPEOCCnuAttenuationTrap notification is sent when a CNU's attenuation is changing.
NTF h3cEOCCnuAutoUpdateErrTrap	1.3.6.1.4.1.2011.10.2.83.5.0.21			A h3cEOCCnuAutoUpdateErrTrap notification is sent when the online CNU doesn't auto update successfully.
NTF h3cEOCCnuAutoUpdateSuccTrap	1.3.6.1.4.1.2011.10.2.83.5.0.22			A h3cEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU auto update successfully.
NTF h3cEOCCnuDeviceTypeErrReTrap	1.3.6.1.4.1.2011.10.2.83.5.0.20			A h3cEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU doesn't match the type which user defined earlier and then recover.
NTF h3cEOCCnuDeviceTypeErrTrap	1.3.6.1.4.1.2011.10.2.83.5.0.19			A h3cEOCCnuDeviceTypeErrTrap notification is sent when the online CNU doesn't match the type which user defined earlier.
NTF h3cEOCCnuFWDownLoadErrReTrap	1.3.6.1.4.1.2011.10.2.83.5.0.18			A h3cEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover from the download CNU firmware error.
NTF h3cEOCCnuFWDownLoadErrTrap	1.3.6.1.4.1.2011.10.2.83.5.0.17			A h3cEOCCnuFWDownLoadErrTrap notification is sent when CLT can't download CNU firmware from the server successfully.
NTF h3cEOCCnuLinkupTrap	1.3.6.1.4.1.2011.10.2.83.5.0.5			A h3cEOCCnuLinkupTrap notification is sent when a CNU linkup.
NTF h3cEOCCnuOffLineTrap	1.3.6.1.4.1.2011.10.2.83.5.0.4			A h3cEOCCnuOffLineTrap notification is sent when a CNU offline.
NTF h3cEOCCnuRegExcessRecoverTrap	1.3.6.1.4.1.2011.10.2.83.5.0.2			A h3cEOCCnuRegExcessRecoverTrap notification is sent when h3cEOCCnuRegExcessTrap is detected and then recoverd.
NTF h3cEOCCnuRegExcessTrap	1.3.6.1.4.1.2011.10.2.83.5.0.1			A h3cEOCCnuRegExcessTrap notification is sent when the number of registered CNUs exceeds the limit.
NTF h3cEOCCnuRegFailTrap	1.3.6.1.4.1.2011.10.2.83.5.0.10			A h3cEOCCnuRegFailTrap notification is sent when a CNU registers fail.
NTF h3cEOCCnuRegSuccTrap	1.3.6.1.4.1.2011.10.2.83.5.0.3			A h3cEOCCnuRegSuccTrap notification is sent when a CNU registers successful.
NTF h3cEOCCnuRxRateDropRecoverTrap	1.3.6.1.4.1.2011.10.2.83.5.0.16			A h3cEOCCnuRxRateDropRecoverTrap notification is sent when cable port rate of RX capability recover from the recent rate-drop trap.
NTF h3cEOCCnuRxRateDropTrap	1.3.6.1.4.1.2011.10.2.83.5.0.15			A h3cEOCCnuRxRateDropTrap notification is sent when cable port rate of RX capability drop exceeded threshold.
NTF h3cEOCCnuTxRateDropRecoverTrap	1.3.6.1.4.1.2011.10.2.83.5.0.14			A h3cEOCCnuTxRateDropRecoverTrap notification is sent when cable port rate of TX capability recover from the recent rate-drop trap.
NTF h3cEOCCnuTxRateDropTrap	1.3.6.1.4.1.2011.10.2.83.5.0.13			A h3cEOCCnuTxRateDropTrap notification is sent when cable port rate of TX capability drop exceeded threshold.
INT h3cEOCComCnuAccess	1.3.6.1.4.1.2011.10.2.83.3.2.1.12	INTEGER	read-write	Control whether the user can access to the network.
I32 h3cEOCComCnuAttenThrA	1.3.6.1.4.1.2011.10.2.83.3.1.7	Integer32	read-write	The value of cnu's average attenuation good level thresholds.
I32 h3cEOCComCnuAttenThrB	1.3.6.1.4.1.2011.10.2.83.3.1.8	Integer32	read-write	The value of cnu's average attenuation normal level thresholds.
I32 h3cEOCComCnuAttenuation	1.3.6.1.4.1.2011.10.2.83.3.4.1.4	Integer32	read-only	The cnu's average attenuation.
h3cEOCComCnuBandWidthEntry	1.3.6.1.4.1.2011.10.2.83.3.5.1		not-accessible	The entry of table h3cEOCComCnuBandWidthTable. It is a pre-configuration.
h3cEOCComCnuBandWidthTable	1.3.6.1.4.1.2011.10.2.83.3.5		not-accessible	Set bandwidth parameters.
I32 h3cEOCComCnuCableIfindex	1.3.6.1.4.1.2011.10.2.83.3.2.1.1	Integer32	read-only	The index of cable port which uniquely identifies the cable port of one device.
INT h3cEOCComCnuDeregister	1.3.6.1.4.1.2011.10.2.83.3.2.1.10	INTEGER	read-write	deregister CNU.
STR h3cEOCComCnuDescr	1.3.6.1.4.1.2011.10.2.83.3.2.1.4	DisplayString	read-write	User's description, including user's address, name, telephone number and so on.
STR h3cEOCComCnuDescripton	1.3.6.1.4.1.2011.10.2.83.6.1.1.2	DisplayString	read-only	The description for unique cnu types.
STR h3cEOCComCnuDeviceAlias	1.3.6.1.4.1.2011.10.2.83.3.2.1.3	DisplayString	read-write	EOC CNU's alias which display as the device's name, it's recommended to set it uniquely and understandably.
STR h3cEOCComCnuDeviceType	1.3.6.1.4.1.2011.10.2.83.3.2.1.2	DisplayString	read-write	The type of the EOC CNU(Coax Network Unit).
STR h3cEOCComCnuHardwareVersion	1.3.6.1.4.1.2011.10.2.83.3.4.1.1	DisplayString	read-only	EOC CNU's hardware version. If the object length is zero, it means the version is unknown.
h3cEOCComCnuInfoEntry	1.3.6.1.4.1.2011.10.2.83.3.4.1		not-accessible	The entry of the h3cEOCComCnuInfoTable.
h3cEOCComCnuInfoTable	1.3.6.1.4.1.2011.10.2.83.3.4		not-accessible	Primary status of the specified CNU. There will be one row in this table for each information in the system.
INT h3cEOCComCnuLinkState	1.3.6.1.4.1.2011.10.2.83.3.4.1.3	INTEGER	read-only	The cable port's link state. The physicaldown(1) state indicates that the CNU is not powered on. The linkdown(2) state indicates that the CNU is powered on, but registers fail. The linkup(3) state indicates that the CNU is powered on, and registers successful.
MAC h3cEOCComCnuMacAddress	1.3.6.1.4.1.2011.10.2.83.3.3.1.1	MacAddress	read-create	EOC CNU's MAC address.
h3cEOCComCnuMacEntry	1.3.6.1.4.1.2011.10.2.83.3.3.1		not-accessible	The entry of the table h3cEOCComCnuMacTable.
h3cEOCComCnuMacTable	1.3.6.1.4.1.2011.10.2.83.3.3		not-accessible	This table implements the management of CNUs.
h3cEOCComCnuMan	1.3.6.1.4.1.2011.10.2.83.3
I32 h3cEOCComCnuMaxDownBW	1.3.6.1.4.1.2011.10.2.83.3.5.1.1	Integer32	read-write	Maximum bandwidth allowed for the CNU, measured in Kbit/s.
I32 h3cEOCComCnuMaxDownBWMaxVal	1.3.6.1.4.1.2011.10.2.83.3.1.2	Integer32	read-only	The upper limit of total-bandwidth which is confined to h3cEOCComCnuMaxDownBW.
I32 h3cEOCComCnuMaxDownBWMinVal	1.3.6.1.4.1.2011.10.2.83.3.1.1	Integer32	read-only	The lower limit of total-bandwidth which is confined to h3cEOCComCnuMaxDownBW.
I32 h3cEOCComCnuMaxUpBW	1.3.6.1.4.1.2011.10.2.83.3.5.1.3	Integer32	read-write	Total bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cEOCComCnuSlaHighPriBW. The total bandwidth should be larger than the high priority bandwidth.
I32 h3cEOCComCnuMaxUpBWMaxVal	1.3.6.1.4.1.2011.10.2.83.3.1.6	Integer32	read-only	The upper limit of total-bandwidth which is confined to h3cEOCComCnuMaxUpBW.
I32 h3cEOCComCnuMaxUpBWMinVal	1.3.6.1.4.1.2011.10.2.83.3.1.5	Integer32	read-only	The lower limit of total-bandwidth which is confined to h3cEOCComCnuMaxUpBW.
I32 h3cEOCComCnuNumber	1.3.6.1.4.1.2011.10.2.83.6.2.1.1	Integer32	read-only	The number of special type of cnu that has been registerd in clt.
h3cEOCComCnuNumEntry	1.3.6.1.4.1.2011.10.2.83.6.2.1		not-accessible	The entry of the table h3cEOCComCnuNumTable.
h3cEOCComCnuNumTable	1.3.6.1.4.1.2011.10.2.83.6.2		not-accessible	This table defines the number of cnu registered in variable types of the CLT .
OCT h3cEOCComCnuPCBVersion	1.3.6.1.4.1.2011.10.2.83.3.4.1.2	OCTET STRING	read-only	EOC CNU's PCB version.
I32 h3cEOCComCnuPvid	1.3.6.1.4.1.2011.10.2.83.3.2.1.7	Integer32	read-write	The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on cable interface.
I32 h3cEOCComCnuRateDropThr	1.3.6.1.4.1.2011.10.2.83.3.1.9	Integer32	read-write	The value of cnu's Tx/Rx rate drop thresholds.
INT h3cEOCComCnuReset	1.3.6.1.4.1.2011.10.2.83.3.2.1.9	INTEGER	read-write	This variable is used to reset the CNU device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the CNU device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.
ROW h3cEOCComCnuRowStatus	1.3.6.1.4.1.2011.10.2.83.3.3.1.2	RowStatus	read-create	Operation status.
I32 h3cEOCComCnuRxRate	1.3.6.1.4.1.2011.10.2.83.3.4.1.7	Integer32	read-only	The cnu's capability of rx speed in unit of 1Mbps.
I32 h3cEOCComCnuRxRateDrop	1.3.6.1.4.1.2011.10.2.83.3.4.1.9	Integer32	read-only	The cnu's capability droping of rx speed from it's history max value in unit of %.
INT h3cEOCComCnuSave	1.3.6.1.4.1.2011.10.2.83.3.2.1.11	INTEGER	read-write	Save the UNI and CNU related configurations to the CNU.
h3cEOCComCnuScalarObjects	1.3.6.1.4.1.2011.10.2.83.3.1
I32 h3cEOCComCnuSlaHighPriBW	1.3.6.1.4.1.2011.10.2.83.3.5.1.2	Integer32	read-write	High priority bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cEOCComCnuMaxUpBW. The high priority bandwidth should not be larger than the maximum bandwidth.
I32 h3cEOCComCnuSlaHighPriBWMaxVal	1.3.6.1.4.1.2011.10.2.83.3.1.4	Integer32	read-only	The upper limit of high priority bandwidth which is confined to h3cEOCComCnuSlaHighPriBW.
I32 h3cEOCComCnuSlaHighPriBWMinVal	1.3.6.1.4.1.2011.10.2.83.3.1.3	Integer32	read-only	The lower limit of high priority bandwidth which is confined to h3cEOCComCnuSlaHighPriBW.
STR h3cEOCComCnuSoftwareVersion	1.3.6.1.4.1.2011.10.2.83.3.4.1.5	DisplayString	read-only	EOC CNU's software version. If the object length is zero, it means the version is unknown.
h3cEOCComCnuSysManEntry	1.3.6.1.4.1.2011.10.2.83.3.2.1		not-accessible	The entry of the table h3cEOCComCnuSysManTable.
h3cEOCComCnuSysManTable	1.3.6.1.4.1.2011.10.2.83.3.2		not-accessible	This table implements the management of CNUs(Coax Network Unit).
I32 h3cEOCComCnuTxRate	1.3.6.1.4.1.2011.10.2.83.3.4.1.6	Integer32	read-only	The cnu's capability of tx speed in unit of 1Mbps.
I32 h3cEOCComCnuTxRateDrop	1.3.6.1.4.1.2011.10.2.83.3.4.1.8	Integer32	read-only	The cnu's capability droping of tx speed from it's history max value in unit of %.
h3cEOCComCnuTypeEntry	1.3.6.1.4.1.2011.10.2.83.6.1.1		not-accessible	The entry of the table h3cEOCComCnuTypeTable.
U32 h3cEOCComCnuTypeIdx	1.3.6.1.4.1.2011.10.2.83.6.1.1.1	Unsigned32	not-accessible	A unique value for each cnu types. Its value ranges between 1 and the value of cny typess.
h3cEOCComCnuTypeTable	1.3.6.1.4.1.2011.10.2.83.6.1		not-accessible	This table defines the description of cnu typ.
TIK h3cEOCComCnuUpTime	1.3.6.1.4.1.2011.10.2.83.3.2.1.5	TimeTicks	read-only	The time since the CNU last registered to the network.
INT h3cEOCComCnuVlanTag	1.3.6.1.4.1.2011.10.2.83.3.2.1.8	INTEGER	read-write	VLAN is set tagged or untagged on cable interface.
INT h3cEOCComCnuVLANType	1.3.6.1.4.1.2011.10.2.83.3.2.1.6	INTEGER	read-write	port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
h3cEOCCommon	1.3.6.1.4.1.2011.10.2.83			The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification.
T/F h3cEOCCommonCltAutoAuthorize	1.3.6.1.4.1.2011.10.2.83.2.1.1.1	TruthValue	read-write	This value determines whether software performs self-authorization for each Cable Network Unit(CNU) registering to the network. Setting it to false means for every CNU registering, software requires external authorization, and until it's done the CNU is not authenticated. True value means software authorizes each CNU registering to the network automatically.
h3cEOCCommonCltMan	1.3.6.1.4.1.2011.10.2.83.2
h3cEOCCommonCltManEntry	1.3.6.1.4.1.2011.10.2.83.2.1.1		not-accessible	The entry of the table h3cEOCCommonCltManTable.
h3cEOCCommonCltManTable	1.3.6.1.4.1.2011.10.2.83.2.1		not-accessible	This table defines the primary parameters of the CLT configuration.
I32 h3cEOCCommonCltMaxAllowToAccess	1.3.6.1.4.1.2011.10.2.83.2.1.1.2	Integer32	read-write	This value determines how many CNU can be bound in this CLT. If the number of CNU is more than this value , then the rest of CNU should not be allow to access.
h3cEOCCommonSysMan	1.3.6.1.4.1.2011.10.2.83.1
h3cEOCCommonSysScalarObjects	1.3.6.1.4.1.2011.10.2.83.1.1
OCT h3cEOCCommonSysVersion	1.3.6.1.4.1.2011.10.2.83.1.1.1	OCTET STRING	read-only	Eoc version. If the object length is zero, it means the version is unknown. The length is up to 1024.
h3cEOCCommonTrap	1.3.6.1.4.1.2011.10.2.83.5
MAC h3cEOCCommonUpLinkMacAddress	1.3.6.1.4.1.2011.10.2.83.1.1.2	MacAddress	read-only	EOC CLT's uplink device's mac address.
h3cEOCComOnLineCnuMan	1.3.6.1.4.1.2011.10.2.83.6
INT h3cEOCComUniAdminStatus	1.3.6.1.4.1.2011.10.2.83.4.1.1.19	INTEGER	read-write	Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard.
STR h3cEOCComUniAlias	1.3.6.1.4.1.2011.10.2.83.4.1.1.11	DisplayString	read-write	This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first instantiation of an interface, the value of h3cEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of h3cEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the h3cEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and h3cEOCUniIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of h3cEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
h3cEOCComUniCountEntry	1.3.6.1.4.1.2011.10.2.83.4.2.1		not-accessible	An entry containing management information applicable to a particular interface.
INT h3cEOCComUniCountReset	1.3.6.1.4.1.2011.10.2.83.4.1.1.10	INTEGER	read-write	Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.
h3cEOCComUniCountTable	1.3.6.1.4.1.2011.10.2.83.4.2		not-accessible	A list of interface counter about frames entries.
INT h3cEOCComUniCurrentDuplex	1.3.6.1.4.1.2011.10.2.83.4.1.1.7	INTEGER	read-only	The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.
G32 h3cEOCComUniCurrentSpeedEx	1.3.6.1.4.1.2011.10.2.83.4.1.1.6	Gauge32	read-only	An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.
STR h3cEOCComUniDescr	1.3.6.1.4.1.2011.10.2.83.4.1.1.2	DisplayString	read-only	A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.
U32 h3cEOCComUniDownLineRate	1.3.6.1.4.1.2011.10.2.83.4.1.1.18	Unsigned32	read-write	The max speed download in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the download speed is only restricted by the physical line.
INT h3cEOCComUniDuplex	1.3.6.1.4.1.2011.10.2.83.4.1.1.5	INTEGER	read-write	User network interface mode.
T/F h3cEOCComUniFlowControl	1.3.6.1.4.1.2011.10.2.83.4.1.1.9	TruthValue	read-write	Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.
h3cEOCComUniMan	1.3.6.1.4.1.2011.10.2.83.4
h3cEOCComUniManEntry	1.3.6.1.4.1.2011.10.2.83.4.1.1		not-accessible	The entry of h3cEOCComUniManTable.
h3cEOCComUniManTable	1.3.6.1.4.1.2011.10.2.83.4.1		not-accessible	This table defines several user network interface(UNI) system parameters.
INT h3cEOCComUniMdi	1.3.6.1.4.1.2011.10.2.83.4.1.1.8	INTEGER	read-write	Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).
I32 h3cEOCComUniPriority	1.3.6.1.4.1.2011.10.2.83.4.1.1.16	Integer32	read-write	The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.
I32 h3cEOCComUniPvid	1.3.6.1.4.1.2011.10.2.83.4.1.1.14	Integer32	read-write	The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
INT h3cEOCComUniSpeed	1.3.6.1.4.1.2011.10.2.83.4.1.1.4	INTEGER	read-write	User network interface speed.
INT h3cEOCComUniStatus	1.3.6.1.4.1.2011.10.2.83.4.1.1.3	INTEGER	read-write	The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down state. The testing state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, h3cEOCComUniStatus is then changed to either the up or testing states (or remains in the down state).
IAN h3cEOCComUniType	1.3.6.1.4.1.2011.10.2.83.4.1.1.12	IANAifType	read-only	The type of interface. Additional values for h3cEOCComUniType are assigned by the Internet Assigned Numbers Authority(IANA), through updating the syntax of the IANAifType textual convention.
U32 h3cEOCComUniUpLineRate	1.3.6.1.4.1.2011.10.2.83.4.1.1.17	Unsigned32	read-write	The max speed upload in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line.
INT h3cEOCComUniVlanTag	1.3.6.1.4.1.2011.10.2.83.4.1.1.15	INTEGER	read-write	VLAN is set tagged or untagged.
INT h3cEOCComUniVLANType	1.3.6.1.4.1.2011.10.2.83.4.1.1.13	INTEGER	read-write	port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
NTF h3cEOCOamDisconnectRecoverTrap	1.3.6.1.4.1.2011.10.2.83.5.0.7			A h3cEOCOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
NTF h3cEOCOamDisconnectTrap	1.3.6.1.4.1.2011.10.2.83.5.0.6			A h3cEOCOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
h3cEOCTrapPrefix	1.3.6.1.4.1.2011.10.2.83.5.0
U32 h3cEOCUniInBPkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.3	Unsigned32	read-only	The total number of good packets received that are directed to the broadcast address. Note that this does not include multicast packets.
U32 h3cEOCUniInCRCErrs	1.3.6.1.4.1.2011.10.2.83.4.2.1.7	Unsigned32	read-only	The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
U32 h3cEOCUniIndex	1.3.6.1.4.1.2011.10.2.83.4.1.1.1	Unsigned32	not-accessible	The index value which uniquely identifies the FE(Fast Ethernet) interface of the CNU.
U32 h3cEOCUniInErrorbyOther	1.3.6.1.4.1.2011.10.2.83.4.2.1.10	Unsigned32	read-only	The total number of other error packets received on this interface.
U32 h3cEOCUniInMPkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.4	Unsigned32	read-only	The total number of good packets received that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
U32 h3cEOCUniInOctets	1.3.6.1.4.1.2011.10.2.83.4.2.1.11	Unsigned32	read-only	The total number of octets received on this interface.
U32 h3cEOCUniInOversizePkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.9	Unsigned32	read-only	The total number of packets received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.
U32 h3cEOCUniInPausePkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.5	Unsigned32	read-only	A count of MAC Control packets received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
U32 h3cEOCUniInPkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.1	Unsigned32	read-only	The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
U32 h3cEOCUniInTotalErrors	1.3.6.1.4.1.2011.10.2.83.4.2.1.6	Unsigned32	read-only	Total count of the error packets received on this interface.
U32 h3cEOCUniInUndersizePkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.8	Unsigned32	read-only	The total number of packets received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.
U32 h3cEOCUniInUPkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.2	Unsigned32	read-only	The total number of good packets received that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
U32 h3cEOCUniOutBPkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.14	Unsigned32	read-only	The total number of good packets sent that are directed to the broadcast address. Note that this does not include multicast packets.
U32 h3cEOCUniOutCollisions	1.3.6.1.4.1.2011.10.2.83.4.2.1.18	Unsigned32	read-only	The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
U32 h3cEOCUniOutDelayExceedDsds	1.3.6.1.4.1.2011.10.2.83.4.2.1.19	Unsigned32	read-only	The number of packets discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
U32 h3cEOCUniOutDroppedFrames	1.3.6.1.4.1.2011.10.2.83.4.2.1.21	Unsigned32	read-only	The total number of frames dropped because of buffer failure.
U32 h3cEOCUniOutErrorbyOther	1.3.6.1.4.1.2011.10.2.83.4.2.1.20	Unsigned32	read-only	The total number of other error packets sent on this interface. Other error packets means the error packets out of collision packets and excessive delayed packets.
U32 h3cEOCUniOutMPkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.15	Unsigned32	read-only	The total number of good packets sent that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
U32 h3cEOCUniOutOctets	1.3.6.1.4.1.2011.10.2.83.4.2.1.22	Unsigned32	read-only	The total number of octets transmitted out of the interface.
U32 h3cEOCUniOutPausePkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.16	Unsigned32	read-only	The total number of MAC control packets sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
U32 h3cEOCUniOutPkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.12	Unsigned32	read-only	The total number of packets (including bad packets, broadcast packets, and multicast packets) sent.
U32 h3cEOCUniOutTotalErrors	1.3.6.1.4.1.2011.10.2.83.4.2.1.17	Unsigned32	read-only	The total number of error packets sent on this interface.
U32 h3cEOCUniOutUPkts	1.3.6.1.4.1.2011.10.2.83.4.2.1.13	Unsigned32	read-only	The total number of good packets sent that are directed to the unicast address. Note that this does not include multicast and broadcast packets.

RFC description

Manages Ethernet Over Cable and Passive Optical Network (PON) common configuration and monitoring for H3C EOC devices.

Start monitoring H3C broadband access/aggregation device (Ethernet-over-Coax) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-EOC-COMMON-MIB