All MIBs › H3C-EOC-COMMON-MIB › h3cEOCComUniCurrentDuplex
h3cEOCComUniCurrentDuplex
Module: H3C-EOC-COMMON-MIB
OID (symbolic): H3C-EOC-COMMON-MIB::h3cEOCComUniCurrentDuplex
OID (numeric): 1.3.6.1.4.1.2011.10.2.83.4.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined.
Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType.
Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.
What is h3cEOCComUniCurrentDuplex?
Reports the actual duplex mode currently in effect on this UNI's MAC, or unknown if it can't be determined. Admins compare this against the configured h3cEOCComUniDuplex setting to spot a duplex mismatch causing collisions or poor performance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.83.4.1.1.7 snmpwalk -v2c -c public <target> H3C-EOC-COMMON-MIB::h3cEOCComUniCurrentDuplex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.83.4.1.1.7.1 snmpget -v2c -c public <target> H3C-EOC-COMMON-MIB::h3cEOCComUniCurrentDuplex.1
Start monitoring H3C broadband access/aggregation device (Ethernet-over-Coax) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-EOC-COMMON-MIB::h3cEOCComUniCurrentDuplex OID value, configure state conditions and alerts, and monitor any H3C broadband access/aggregation device (Ethernet-over-Coax) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10 | h3c | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.10.2 | h3cCommon | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.10.2.83 | h3cEOCCommon | H3C-EOC-COMMON-MIB |
| 1.3.6.1.4.1.2011.10.2.83.4 | h3cEOCComUniMan | H3C-EOC-COMMON-MIB |
| 1.3.6.1.4.1.2011.10.2.83.4.1 | h3cEOCComUniManTable | H3C-EOC-COMMON-MIB |
| 1.3.6.1.4.1.2011.10.2.83.4.1.1 | h3cEOCComUniManEntry | H3C-EOC-COMMON-MIB |
| 1.3.6.1.4.1.2011.10.2.83.4.1.1.7 | h3cEOCComUniCurrentDuplex | H3C-EOC-COMMON-MIB |