H3C-EOC-COMMON-MIB :: h3cEOCComUniAlias

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsH3C-EOC-COMMON-MIBh3cEOCComUniAlias

h3cEOCComUniAlias

Module: H3C-EOC-COMMON-MIB

OID (symbolic): H3C-EOC-COMMON-MIB::h3cEOCComUniAlias

OID (numeric): 1.3.6.1.4.1.2011.10.2.83.4.1.1.11

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface.

On the first instantiation of an interface, the value of h3cEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of h3cEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the h3cEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and h3cEOCUniIndex value.

An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface.

Some agents may support write-access only for interfaces having particular values of h3cEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.

What is h3cEOCComUniAlias?

Sets a non-volatile alias name for this UNI, persisting across reboots and ifIndex changes; an example use is recording a WAN circuit identifier. Admins use it to give the interface a stable, human-meaningful label independent of its index.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.83.4.1.1.11
snmpwalk -v2c -c public <target> H3C-EOC-COMMON-MIB::h3cEOCComUniAlias

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.10.2.83.4.1.1.11.1
snmpget -v2c -c public <target> H3C-EOC-COMMON-MIB::h3cEOCComUniAlias.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.10.2.83.4.1.1.11.1 s <value>

Start monitoring H3C broadband access/aggregation device (Ethernet-over-Coax) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the H3C-EOC-COMMON-MIB::h3cEOCComUniAlias OID value, configure state conditions and alerts, and monitor any H3C broadband access/aggregation device (Ethernet-over-Coax) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.10h3cHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.10.2h3cCommonHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.10.2.83h3cEOCCommonH3C-EOC-COMMON-MIB
1.3.6.1.4.1.2011.10.2.83.4h3cEOCComUniManH3C-EOC-COMMON-MIB
1.3.6.1.4.1.2011.10.2.83.4.1h3cEOCComUniManTableH3C-EOC-COMMON-MIB
1.3.6.1.4.1.2011.10.2.83.4.1.1h3cEOCComUniManEntryH3C-EOC-COMMON-MIB
1.3.6.1.4.1.2011.10.2.83.4.1.1.11h3cEOCComUniAliasH3C-EOC-COMMON-MIB