All MIBs › GDCUAS7022-MIB › uas7022SwitchActiveFirmware
uas7022SwitchActiveFirmware
Module: GDCUAS7022-MIB
OID (symbolic): GDCUAS7022-MIB::uas7022SwitchActiveFirmware
OID (numeric): 1.3.6.1.4.1.498.6.13.1.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to switch the active executing firmware from the version in uas7022ActiveFirmwareRev to the version in uas7022StoredFirmwareRev.
When a switchActive(2) is set (write only) the element will: 1) reboot 2) uncompress stored code into active area 3) perform checksum on active area 4) Set uas7022StoredStatus object to indicate results 5) If succesfull: update uas7022ActiveFirmwareRev and uas7022StoredFirmwareRev and begin executing If failed: replace active area with previous revision
The switchNorm(1) enumeration will always be read.
Setting switchActive(2) when the uas7022StoredFirmwareStatus is not statOK(3) will result in an error. Valid [i]nterface = 0
What is uas7022SwitchActiveFirmware?
A write-only trigger that, when set to switchActive(2), reboots the card, uncompresses the stored firmware into the active area, verifies its checksum, and either starts running it or rolls back to the previous version on failure. Admins use this to cut over to a newly downloaded firmware image, but must first confirm uas7022StoredFirmwareStatus is statOK or the set will be rejected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.6.13.1.2.1.5 snmpwalk -v2c -c public <target> GDCUAS7022-MIB::uas7022SwitchActiveFirmware
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.6.13.1.2.1.5.1 snmpget -v2c -c public <target> GDCUAS7022-MIB::uas7022SwitchActiveFirmware.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.6.13.1.2.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> uas7022SwitchActiveFirmware.1
Start monitoring General DataComm (GDC) UAS7022 universal access system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GDCUAS7022-MIB::uas7022SwitchActiveFirmware OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) UAS7022 universal access system from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.6 | dsx1 | GDC-5553-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.6.13 | uas7022 | GDCUAS7022-MIB |
| 1.3.6.1.4.1.498.6.13.1 | uas7022Version | GDCUAS7022-MIB |
| 1.3.6.1.4.1.498.6.13.1.2 | uas7022VersionTable | GDCUAS7022-MIB |
| 1.3.6.1.4.1.498.6.13.1.2.1 | uas7022VersionEntry | GDCUAS7022-MIB |
| 1.3.6.1.4.1.498.6.13.1.2.1.5 | uas7022SwitchActiveFirmware | GDCUAS7022-MIB |