MIB-INTEL-IP

All MIBs › MIB-INTEL-IP

Category: IP Routing

Description: Monitors Intel IP networking statistics and routing performance on Intel-based systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MIB-INTEL-IP?

This is an Intel private MIB intended to monitor IP networking statistics and routing performance on Intel-based systems, likely tied to Intel's server or network-adapter software stack. No object names were captured for this module in the source, but MIBs of this description typically expose IP-layer packet counters, routing table statistics, and interface-level throughput/error data. Its monitoring value would center on software/network-stack status: detecting packet loss, routing instability, or throughput degradation at the IP layer on the host system. It likely complements or overlaps with standard IP-MIB/IP-FORWARD-MIB objects, given its stated purpose of IP statistics and routing performance. It would be deployed on Intel-based servers or network appliances where administrators need vendor-specific insight into IP-layer performance beyond generic OS counters. Network engineers evaluating or troubleshooting this functionality can download the MIB-INTEL-IP file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MIB-INTEL-IP. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel-based server or network appliance

Monitoring Examples

An administrator would typically poll IP packet counters (in/out, errors, discards) to identify a host experiencing network-layer packet loss under load. Routing performance objects would be checked after a routing table change to confirm the new routes are being used efficiently. Interface throughput objects would be compared against expected baseline traffic to catch a misbehaving NIC or driver.

What Can Be Monitored

IP packet counters (in/out/errors)
routing table statistics
IP-layer throughput
routing performance metrics

Imported Objects

From INTEL-GEN-MIB

mib2ext

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
ipr	1.3.6.1.4.1.343.6.38
rtIpRouteTable	1.3.6.1.4.1.343.6.38.1		not-accessible	This entity's IP Routing table.
rtIpRouteEntry	1.3.6.1.4.1.343.6.38.1.1		not-accessible	A route to a particular destination.
INT rtIpRouteChassis	1.3.6.1.4.1.343.6.38.1.1.1	INTEGER	read-only	Chassis number in stack that contains the module.
INT rtIpRouteModule	1.3.6.1.4.1.343.6.38.1.1.2	INTEGER	read-only	Module number in the chassis.
INT rtIpRouteInst	1.3.6.1.4.1.343.6.38.1.1.3	INTEGER	read-only	Routing table instance number.
IP rtIpRouteDest	1.3.6.1.4.1.343.6.38.1.1.4	IpAddress	read-only	The destination IP address of this route.
IP rtIpRouteMask	1.3.6.1.4.1.343.6.38.1.1.5	IpAddress	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rtIpRouteDest field.
INT rtIpRouteIfIndex	1.3.6.1.4.1.343.6.38.1.1.6	INTEGER	read-only	The interface that the frame is forwarded on.
IP rtIpRouteNextHop	1.3.6.1.4.1.343.6.38.1.1.7	IpAddress	read-only	The IP address of the next hop of this route.
INT rtIpRoutePref	1.3.6.1.4.1.343.6.38.1.1.8	INTEGER	read-only	The preference value for this route.
INT rtIpRouteMetric	1.3.6.1.4.1.343.6.38.1.1.9	INTEGER	read-only	The routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtIpRouteProto value.
INT rtIpRouteProto	1.3.6.1.4.1.343.6.38.1.1.10	INTEGER	read-only	The routing mechanism via which this route was learned.
INT rtIpRouteAge	1.3.6.1.4.1.343.6.38.1.1.11	INTEGER	read-only	The number of seconds since this route was last updated or otherwise detemined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned.
rtIpRteTable	1.3.6.1.4.1.343.6.38.2		not-accessible	The list of all routing table entries (RTE). There may be several entries describing a route to the same destination (entries with the same IP address and mask but different preference, protocol or metric). Forwarding engine uses only the best one - this one which can be found in the Routing Table. All other entries as well the best one are available in rtIpRteTable. If for some reason the best entry has been lost then the best one will be chosen from other entries to the same destination.
rtIpRteEntry	1.3.6.1.4.1.343.6.38.2.1		not-accessible	A route to a particular destination.
INT rtIpRteChassis	1.3.6.1.4.1.343.6.38.2.1.1	INTEGER	read-only	Chassis number in stack that contains the module.
INT rtIpRteModule	1.3.6.1.4.1.343.6.38.2.1.2	INTEGER	read-only	Module number in the chassis.
INT rtIpRteInst	1.3.6.1.4.1.343.6.38.2.1.3	INTEGER	read-only	Alternative routing table instance number.
IP rtIpRteDest	1.3.6.1.4.1.343.6.38.2.1.4	IpAddress	read-only	The destination IP address of this route.
IP rtIpRteMask	1.3.6.1.4.1.343.6.38.2.1.5	IpAddress	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rtIpRteDest field.
INT rtIpRtePref	1.3.6.1.4.1.343.6.38.2.1.6	INTEGER	read-only	The preference value for this route.
INT rtIpRteProto	1.3.6.1.4.1.343.6.38.2.1.7	INTEGER	read-only	The routing mechanism via which this route was learned.
INT rtIpRteIfIndex	1.3.6.1.4.1.343.6.38.2.1.8	INTEGER	read-only	The interface that the frame is forwarded on.
IP rtIpRteNextHop	1.3.6.1.4.1.343.6.38.2.1.9	IpAddress	read-only	The IP address of the next hop of this route.
INT rtIpRteState	1.3.6.1.4.1.343.6.38.2.1.10	INTEGER	read-write	The state of the route.
INT rtIpRteAge	1.3.6.1.4.1.343.6.38.2.1.11	INTEGER	read-only	The number of seconds since this route was last updated or otherwise detemined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned.
INT rtIpRteMetric	1.3.6.1.4.1.343.6.38.2.1.12	INTEGER	read-write	The metric of the alternative route.
rtIpStaticRouteTable	1.3.6.1.4.1.343.6.38.3		not-accessible	A table of all configured static routes.
rtIpStaticRouteEntry	1.3.6.1.4.1.343.6.38.3.1		not-accessible	An entry describing a single static route.
INT rtIpStRtChassis	1.3.6.1.4.1.343.6.38.3.1.1	INTEGER	read-write	Chassis number in stack that contains the module.
INT rtIpStRtModule	1.3.6.1.4.1.343.6.38.3.1.2	INTEGER	read-write	Module number in the chassis.
INT rtIpStRtInst	1.3.6.1.4.1.343.6.38.3.1.3	INTEGER	read-write	Static routing table instance number.
IP rtIpStRtDest	1.3.6.1.4.1.343.6.38.3.1.4	IpAddress	read-write	The destination IP address of this route.
IP rtIpStRtMask	1.3.6.1.4.1.343.6.38.3.1.5	IpAddress	read-write	The destination IP mask of this route.
INT rtIpStRtPref	1.3.6.1.4.1.343.6.38.3.1.6	INTEGER	read-write	The preference value for this route. This value should be unique (neither other static routes to the same destination nor other protocols can use this value).
INT rtIpStRtIfIndex	1.3.6.1.4.1.343.6.38.3.1.7	INTEGER	read-write	The interface that the frame is forwarded on.
IP rtIpStRtNextHop	1.3.6.1.4.1.343.6.38.3.1.8	IpAddress	read-write	The IP address of the next hop of this route.
INT rtIpStRtMetric	1.3.6.1.4.1.343.6.38.3.1.9	INTEGER	read-write	The routing metric for this route.
ROW rtIpStRtStatus	1.3.6.1.4.1.343.6.38.3.1.10	RowStatus	read-write	The status of the route. Setting it to 'destroy'(6) removes the static route from router's configuration.
INT rtIpStRtState	1.3.6.1.4.1.343.6.38.3.1.11	INTEGER	read-write	The current state of the route.

RFC description

Manages IP routing tables for Intel-based network devices with chassis and module indexing.

Start monitoring Intel-based servers and network appliances with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MIB-INTEL-IP

What Is MIB-INTEL-IP?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description