G6-SMARTOFFICE-MIB

All MIBs › G6-SMARTOFFICE-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Vendor: MICROSENS

Description: MICROSENS G6 SmartOffice MIB for integrated building automation and smart workplace management features.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-SMARTOFFICE-MIB?

G6-SMARTOFFICE-MIB is a MICROSENS private MIB extending the Generation 6 Ethernet switch line into building-automation/smart-workplace management, coordinating sensors and connected office devices such as lighting controllers through the switch. It exposes a global enable flag, a "director" configuration table (domain name, general operating mode, sensor grouping behavior, light-controller scanning) and a device configuration table naming and indexing individual managed smart-office devices. Its monitoring role is centered on configuration/operational status of this building-automation feature and the presence/naming of attached smart devices rather than classic network hardware health, though the underlying switch's own health would still be covered by other G6 MIBs. No explicit external MIB dependency is stated, though it likely coexists with G6-PORT-MIB since devices are physically attached to switch ports. It is deployed in MICROSENS G6-based smart office/building installations where the Ethernet switch also orchestrates lighting and sensor infrastructure over the network. Engineers can download the G6-SMARTOFFICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-SMARTOFFICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6 Ethernet switch (SmartOffice building automation feature)

Monitoring Examples

An administrator would check smartofficeEnableSmartOffice and directorConfigGeneralMode to confirm the SmartOffice feature is active and operating in the intended mode, and would review directorConfigScanLightControllers to see whether the switch is actively discovering lighting controllers on the network. deviceConfigTable, keyed by deviceConfigIndex, would be polled to confirm a specific deviceConfigDeviceName is registered and grouped correctly, useful when a sensor or controller appears to have dropped off the smart-office domain. directorConfigActOnUngroupedSensors would be checked when troubleshooting sensors that are detected but not acting on their triggers.

What Can Be Monitored

SmartOffice feature enable state
director operating mode
light controller scan status
registered smart-office device list

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
device	1.3.6.1.4.1.3181.10.6.4			Microsens private MIB for Generation 6 Ethernet Switches
smartoffice	1.3.6.1.4.1.3181.10.6.4.99
INT smartofficeEnableSmartOffice	1.3.6.1.4.1.3181.10.6.4.99.1	INTEGER	read-write	Generally enable the SmartOffice solution.
directorConfigTable	1.3.6.1.4.1.3181.10.6.4.99.2		not-accessible	General configuration of the director.
directorConfigEntry	1.3.6.1.4.1.3181.10.6.4.99.2.1		not-accessible
INT directorConfigIndex	1.3.6.1.4.1.3181.10.6.4.99.2.1.1	INTEGER	not-accessible	Automatically generated
STR directorConfigDomainName	1.3.6.1.4.1.3181.10.6.4.99.2.1.2	DisplayString	read-write
INT directorConfigGeneralMode	1.3.6.1.4.1.3181.10.6.4.99.2.1.3	INTEGER	read-write
INT directorConfigActOnUngroupedSensors	1.3.6.1.4.1.3181.10.6.4.99.2.1.4	INTEGER	read-write	When set any sensor attributes which are not configured to be part of a sensor group, will also trigger the regular script execution. This may be selected in smaller setups to save the effort of defining groups. Note that no event rate limiting can be applied to ungrouped sensors and thus using this mode can result in overloading the system leading to sluggish response times.
STR directorConfigScanLightControllers	1.3.6.1.4.1.3181.10.6.4.99.2.1.5	DisplayString	read-write	Scan the local network for reachable SmartLightController and display a list.
deviceConfigTable	1.3.6.1.4.1.3181.10.6.4.99.3		not-accessible	Defines the configuration of each device under control. A device may contain one or more actor or sensor functions.
deviceConfigEntry	1.3.6.1.4.1.3181.10.6.4.99.3.1		not-accessible
INT deviceConfigIndex	1.3.6.1.4.1.3181.10.6.4.99.3.1.1	INTEGER	not-accessible	Automatically generated
STR deviceConfigDeviceName	1.3.6.1.4.1.3181.10.6.4.99.3.1.2	DisplayString	read-write	Unique group name referenced by the director
STR deviceConfigLocation	1.3.6.1.4.1.3181.10.6.4.99.3.1.3	DisplayString	read-write	Free text to describe the position of the controller on the premesis. This value need NOT be savedwithin the sensor itself.
STR deviceConfigLatitude	1.3.6.1.4.1.3181.10.6.4.99.3.1.4	DisplayString	read-write	A value in degrees such as: 50,123
STR deviceConfigLongitude	1.3.6.1.4.1.3181.10.6.4.99.3.1.5	DisplayString	read-write	A value in degrees such as: 50,123
STR deviceConfigAltitude	1.3.6.1.4.1.3181.10.6.4.99.3.1.6	DisplayString	read-write	A value in meters.
INT deviceConfigPlacement	1.3.6.1.4.1.3181.10.6.4.99.3.1.7	INTEGER	read-write	Information where to find the controller
INT deviceConfigProductType	1.3.6.1.4.1.3181.10.6.4.99.3.1.8	INTEGER	read-write	Defines via which network the sensor is reachable.
STR deviceConfigDeviceId	1.3.6.1.4.1.3181.10.6.4.99.3.1.9	DisplayString	read-write	Unique manufacturer dependent identifier of the device. For SmartLightController the MAC address of the controller is entered here.
STR deviceConfigNetworkAddress	1.3.6.1.4.1.3181.10.6.4.99.3.1.10	DisplayString	read-write	May be an IP or other type of address depending on the given network access method. Can be left blank for a SmartLightController.
STR deviceConfigAdditionalParameter	1.3.6.1.4.1.3181.10.6.4.99.3.1.11	DisplayString	read-write	Comma separated list of any parameter specific for this device. Example: panel=type A,refresh_rate=12
INT deviceConfigNetworkFailureAction	1.3.6.1.4.1.3181.10.6.4.99.3.1.12	INTEGER	read-write	Defines what the actor does if the network connection fails or after reboot until communication is established.
STR deviceConfigIdentify	1.3.6.1.4.1.3181.10.6.4.99.3.1.13	DisplayString	read-write	The actor will blink with its status led to signal its presence and physical location.
STR deviceConfigRestart	1.3.6.1.4.1.3181.10.6.4.99.3.1.14	DisplayString	read-write	Restart the actor.
STR deviceConfigCalibrate	1.3.6.1.4.1.3181.10.6.4.99.3.1.15	DisplayString	read-write	Start calibration process (if available for this actor type).
STR deviceConfigPair	1.3.6.1.4.1.3181.10.6.4.99.3.1.16	DisplayString	read-write	Start pairing process that couples individual device to this director.
STR deviceConfigUnpair	1.3.6.1.4.1.3181.10.6.4.99.3.1.17	DisplayString	read-write	Discard exisiting pairing between an individual device and this director.
STR deviceConfigUpdateFirmware	1.3.6.1.4.1.3181.10.6.4.99.3.1.18	DisplayString	read-write	Update the device firmware. When no file name is supplied, the latest version is automatically selected. Alternatively, a specific file name can be supplied to use another version. Use Management.files.firmware.display_files to view a list of available files under the SLC section. (applies to SmartLight Controllers)
actorGroupConfigTable	1.3.6.1.4.1.3181.10.6.4.99.4		not-accessible	Defines a group of actors that support the same attribute and which shall be set toghter to the same value.
actorGroupConfigEntry	1.3.6.1.4.1.3181.10.6.4.99.4.1		not-accessible
INT actorGroupConfigIndex	1.3.6.1.4.1.3181.10.6.4.99.4.1.1	INTEGER	not-accessible	Automatically generated
STR actorGroupConfigGroupName	1.3.6.1.4.1.3181.10.6.4.99.4.1.2	DisplayString	read-write	Unique group name referenced by the director
STR actorGroupConfigAttribute	1.3.6.1.4.1.3181.10.6.4.99.4.1.3	DisplayString	read-write	The attribute which is configured. Locally, identical attributes of the associated devices listed below are grouped.
STR actorGroupConfigAssociatedDevices	1.3.6.1.4.1.3181.10.6.4.99.4.1.4	DisplayString	read-write	List of all actors that supply information to a particular group. When an instance is used, here the syntax devicename.instance is used. All records are comma separated.
STR actorGroupConfigAdditionalParameter	1.3.6.1.4.1.3181.10.6.4.99.4.1.5	DisplayString	read-write	Comma separated list of any parameter specific for this attribute if needed.
STR actorGroupConfigDefaultValue	1.3.6.1.4.1.3181.10.6.4.99.4.1.6	DisplayString	read-write
INT actorGroupConfigValueCaching	1.3.6.1.4.1.3181.10.6.4.99.4.1.7	INTEGER	read-write	When enabled the group target value is saved to local non volaive memory. Should the director restart, the cached values will be restored and send to the devices. This feature is useful to ensure uninterrupted operation even in the event of a system failure or to restore conditions after a power outage.
STR actorGroupConfigAdditionalScriptName	1.3.6.1.4.1.3181.10.6.4.99.4.1.8	DisplayString	read-write	When the actor group is updated, an additional script, defined here, can be executed to run time consuming functions outside of the standard processing loop. Usually, this field is left empty.
STR actorGroupConfigManualSetValue	1.3.6.1.4.1.3181.10.6.4.99.4.1.9	DisplayString	read-write	This command permits setting of the group value manually bypassing the defined script logic. This is intended for testing only. Important: This manual setting always acts on priority level 8.
sensorGroupConfigTable	1.3.6.1.4.1.3181.10.6.4.99.5		not-accessible	Defines a group of sensors that support the same attribute and whose data should be interpreted together.
sensorGroupConfigEntry	1.3.6.1.4.1.3181.10.6.4.99.5.1		not-accessible
INT sensorGroupConfigIndex	1.3.6.1.4.1.3181.10.6.4.99.5.1.1	INTEGER	not-accessible	Automatically generated
STR sensorGroupConfigGroupName	1.3.6.1.4.1.3181.10.6.4.99.5.1.2	DisplayString	read-write	Unique group name referenced by the director
STR sensorGroupConfigAttribute	1.3.6.1.4.1.3181.10.6.4.99.5.1.3	DisplayString	read-write	The attribute which is configured. Locally, identical attributes of the associated devices listed below are grouped.
STR sensorGroupConfigAssociatedDevices	1.3.6.1.4.1.3181.10.6.4.99.5.1.4	DisplayString	read-write	List of all sensors that supply information to a particular group. When an instance is used, here the syntax devicename.instance is used. All records are comma separated.
INT sensorGroupConfigValueCaching	1.3.6.1.4.1.3181.10.6.4.99.5.1.5	INTEGER	read-write	When enabled the group target value is saved to local non volaive memory. Should the director restart, the cached values will be restored and send to the devices. This feature is useful to ensure uninterrupted operation even in the event of a system failure or to restore conditions after a power outage.
INT sensorGroupConfigRunScriptWhen	1.3.6.1.4.1.3181.10.6.4.99.5.1.6	INTEGER	read-write	Defines which sensor group status needs to change in order to run the standard (and optional additional_script). This can be used to limit the number of script runs by not following little changes that lead to no effect. This filter is logically behind the sensor specific limits defined elsewhere is this table. When the sensor filter is setup well, then this filter here can be relaxed.
STR sensorGroupConfigRunScriptDelta	1.3.6.1.4.1.3181.10.6.4.99.5.1.7	DisplayString	read-write	Defines how much the value can deviate before a value change is reported automatically. Depending on the setting of the report_mode an absolute or a percent value is expected.
STR sensorGroupConfigScriptName	1.3.6.1.4.1.3181.10.6.4.99.5.1.8	DisplayString	read-write	When the group is updated and the required conditions are met, the script specified in this parameter is executed. If the parameter is left blank, the standard MS_SmartOfficeControl.ms script is executed. The specified script should not contain any time consuming functions. Syntax: = appname/filename:subroutine The appname and subroutine name are optional. Without appname, the script must be located in xml_cli_scripts folder.
STR sensorGroupConfigAdditionalScriptName	1.3.6.1.4.1.3181.10.6.4.99.5.1.9	DisplayString	read-write	When the group is updated and the required conditions are met and a script is defined here, this script is executed in the background after the standard processing for this group has taken place. An additional script, defined here, can be used to run time consuming functions outside of the standard processing loop. Usually, this field is left empty.
INT sensorGroupConfigReportMode	1.3.6.1.4.1.3181.10.6.4.99.5.1.10	INTEGER	read-write	Defines if the sensor is passive or actively reports changes and error conditions
STR sensorGroupConfigAdditionalParameter	1.3.6.1.4.1.3181.10.6.4.99.5.1.11	DisplayString	read-write	Comma separated list of any parameter specific for this attribute if needed.
STR sensorGroupConfigLowerBoundary	1.3.6.1.4.1.3181.10.6.4.99.5.1.12	DisplayString	read-write	When the measured value of any sensor is equal or below this value an event is raised. The value may be configured directly with a numerical value optionally followed by a unit.
STR sensorGroupConfigUpperBoundary	1.3.6.1.4.1.3181.10.6.4.99.5.1.13	DisplayString	read-write	When the measured value of any sensor is equal or above this value an event is raised. The value may be configured directly with a numerical value optionally followed by a unit.
INT sensorGroupConfigBoundaryHysteresis	1.3.6.1.4.1.3181.10.6.4.99.5.1.14	INTEGER	read-write	How much the value must return within bounds before the alarm condition is cleared.
STR sensorGroupConfigUpdateDelta	1.3.6.1.4.1.3181.10.6.4.99.5.1.15	DisplayString	read-write	Defines how much the value can deviate before a value change is reported automatically. Depending on the setting of the report_mode an absolute or a percent value is expected.
U32 sensorGroupConfigRateLimit	1.3.6.1.4.1.3181.10.6.4.99.5.1.16	Unsigned32	read-write	Defines how quickly the value is reported. Defined In units of 100ms. 0 means no rate limiting.
STR sensorGroupConfigClearValues	1.3.6.1.4.1.3181.10.6.4.99.5.1.17	DisplayString	read-write	Clear status values for minimum_peak_hold and maximum_peak_hold.
deviceInformationTable	1.3.6.1.4.1.3181.10.6.4.99.100		not-accessible	Summarizes the most important inventory information of each detected device.
deviceInformationEntry	1.3.6.1.4.1.3181.10.6.4.99.100.1		not-accessible
INT deviceInformationIndex	1.3.6.1.4.1.3181.10.6.4.99.100.1.1	INTEGER	not-accessible	Automatically generated
STR deviceInformationName	1.3.6.1.4.1.3181.10.6.4.99.100.1.2	DisplayString	read-only	Unique name for reference. This is name of the base device.
STR deviceInformationHardwareId	1.3.6.1.4.1.3181.10.6.4.99.100.1.3	DisplayString	read-only	A product specific hardware identification. May for example contain the MAC address.
INT deviceInformationDeviceType	1.3.6.1.4.1.3181.10.6.4.99.100.1.4	INTEGER	read-only	Indicates if this is an actor or sensor device.
INT deviceInformationOperationalState	1.3.6.1.4.1.3181.10.6.4.99.100.1.5	INTEGER	read-only	Indicates the operational state of the device. Device (not attribute) specific errors will be indicated here.
STR deviceInformationActorAttributes	1.3.6.1.4.1.3181.10.6.4.99.100.1.6	DisplayString	read-only	Lists which setable actor attributes are provided by this device.
STR deviceInformationSensorAttributes	1.3.6.1.4.1.3181.10.6.4.99.100.1.7	DisplayString	read-only	Lists which readable sensor attributes are provided by this device.
STR deviceInformationVendorName	1.3.6.1.4.1.3181.10.6.4.99.100.1.8	DisplayString	read-only	Vendor or manufacturer name of the device.
STR deviceInformationArticleNumber	1.3.6.1.4.1.3181.10.6.4.99.100.1.9	DisplayString	read-only	This device article number.
STR deviceInformationSerialNumber	1.3.6.1.4.1.3181.10.6.4.99.100.1.10	DisplayString	read-only	This device serial number.
STR deviceInformationHardwareRevision	1.3.6.1.4.1.3181.10.6.4.99.100.1.11	DisplayString	read-only	This device hardware version.
STR deviceInformationSoftwareVersion	1.3.6.1.4.1.3181.10.6.4.99.100.1.12	DisplayString	read-only	This device software / firmware version.
STR deviceInformationAdditionalInfo	1.3.6.1.4.1.3181.10.6.4.99.100.1.13	DisplayString	read-only	Optional comma separated list of status fields specific for this type of device.
actorListTable	1.3.6.1.4.1.3181.10.6.4.99.101		not-accessible	This table lists all currenly registered actors with all their attributes.
actorListEntry	1.3.6.1.4.1.3181.10.6.4.99.101.1		not-accessible
INT actorListIndex	1.3.6.1.4.1.3181.10.6.4.99.101.1.1	INTEGER	not-accessible	Automatically generated
STR actorListDevice	1.3.6.1.4.1.3181.10.6.4.99.101.1.2	DisplayString	read-only	This is name of the base device which controls this actor. There may be several actor types (attributes) in the same device and these share the same name but use different attributes. There may also be several similar actor attribues. These are differentiated with the instance parameter.
STR actorListInstance	1.3.6.1.4.1.3181.10.6.4.99.101.1.3	DisplayString	read-only	Describes a unique instance when several similar functional attributes are existing in the same device
STR actorListAttribute	1.3.6.1.4.1.3181.10.6.4.99.101.1.4	DisplayString	read-only	The kind of function this actor is acting on
STR actorListAssociatedGroups	1.3.6.1.4.1.3181.10.6.4.99.101.1.5	DisplayString	read-only	Indicates in which actor_groups this actor takes part.
STR actorListValue	1.3.6.1.4.1.3181.10.6.4.99.101.1.6	DisplayString	read-only	The currently set value as text string followed by the unit such as mA or Lux.
INT actorListActorState	1.3.6.1.4.1.3181.10.6.4.99.101.1.7	INTEGER	read-only	Indicates wether the indicated value was successfully written to the actual device.
C32 actorListLastUpdate	1.3.6.1.4.1.3181.10.6.4.99.101.1.8	Counter32	read-only	Indicates the time when this record was last updated.
sensorListTable	1.3.6.1.4.1.3181.10.6.4.99.102		not-accessible	This table lists all currenly registered sensors with all their attributes.
sensorListEntry	1.3.6.1.4.1.3181.10.6.4.99.102.1		not-accessible
INT sensorListIndex	1.3.6.1.4.1.3181.10.6.4.99.102.1.1	INTEGER	not-accessible	Automatically generated
STR sensorListDevice	1.3.6.1.4.1.3181.10.6.4.99.102.1.2	DisplayString	read-only	This is name of the base device which controls this sensor. There may be several different sensor types (attributes) in the same device. These share the same name but use different attributes. There may also be several similar sensors in the device. These are differentiated with the instance parameter.
STR sensorListInstance	1.3.6.1.4.1.3181.10.6.4.99.102.1.3	DisplayString	read-only	Describes a unique instance when several similar functional attributes are existing in the same device
STR sensorListAttribute	1.3.6.1.4.1.3181.10.6.4.99.102.1.4	DisplayString	read-only	The kind of measurement this sensor is reporting.
STR sensorListAssociatedGroups	1.3.6.1.4.1.3181.10.6.4.99.102.1.5	DisplayString	read-only	Indicates in which sensor_groups this sensor takes part.
STR sensorListValue	1.3.6.1.4.1.3181.10.6.4.99.102.1.6	DisplayString	read-only	The last reported value as text string followed by the unit such as mA or Lux.
INT sensorListSensorState	1.3.6.1.4.1.3181.10.6.4.99.102.1.7	INTEGER	read-only	Indicates particular sensor states such hitting a boundary.
C32 sensorListLastUpdate	1.3.6.1.4.1.3181.10.6.4.99.102.1.8	Counter32	read-only	Indicates the time when this record was last updated.
actorGroupStatusTable	1.3.6.1.4.1.3181.10.6.4.99.103		not-accessible	Calculated status of the defined actor groups. The listed value reflects the value all associated actors should use. The values update when an actor group is set by a script or manually.
actorGroupStatusEntry	1.3.6.1.4.1.3181.10.6.4.99.103.1		not-accessible
INT actorGroupStatusIndex	1.3.6.1.4.1.3181.10.6.4.99.103.1.1	INTEGER	not-accessible	Automatically generated
STR actorGroupStatusGroupName	1.3.6.1.4.1.3181.10.6.4.99.103.1.2	DisplayString	read-only	This is name mirrors the actor_group_configuration.
STR actorGroupStatusAttribute	1.3.6.1.4.1.3181.10.6.4.99.103.1.3	DisplayString	read-only	The name of the controlled attribute.
I32 actorGroupStatusNumAssignedActors	1.3.6.1.4.1.3181.10.6.4.99.103.1.4	Integer32	read-only	Number of actors that are configured for this group.
I32 actorGroupStatusNumFailedActors	1.3.6.1.4.1.3181.10.6.4.99.103.1.5	Integer32	read-only	Number of actors that have not responded as expected.
INT actorGroupStatusGroupState	1.3.6.1.4.1.3181.10.6.4.99.103.1.6	INTEGER	read-only
STR actorGroupStatusValue	1.3.6.1.4.1.3181.10.6.4.99.103.1.7	DisplayString	read-only	This value is set by the decision logic. May contain simple on,OFF or for example a sound file name
U32 actorGroupStatusActivePriority	1.3.6.1.4.1.3181.10.6.4.99.103.1.8	Unsigned32	read-only	Indicates which priority level is currently controlling the group value. Lower values have higher priority.
STR actorGroupStatusPriorityValueChain	1.3.6.1.4.1.3181.10.6.4.99.103.1.9	DisplayString	read-only	Displays the prority=value pairs of all currently defined priority levels. Relinquished priorites are not shown.
INT actorGroupStatusCacheStatus	1.3.6.1.4.1.3181.10.6.4.99.103.1.10	INTEGER	read-only	Indicates if this group_status is saved even upon system power loss or reboot.
C32 actorGroupStatusLastUpdate	1.3.6.1.4.1.3181.10.6.4.99.103.1.11	Counter32	read-only	Indicates the time when this group status was last updated.
sensorGroupStatusTable	1.3.6.1.4.1.3181.10.6.4.99.104		not-accessible	Calculated status for all sensor groups. The sensor values of all contributing sensors are used to calculate min, max and average values. The values update each time a sensor reports changes.
sensorGroupStatusEntry	1.3.6.1.4.1.3181.10.6.4.99.104.1		not-accessible
INT sensorGroupStatusIndex	1.3.6.1.4.1.3181.10.6.4.99.104.1.1	INTEGER	not-accessible	Automatically generated
STR sensorGroupStatusGroupName	1.3.6.1.4.1.3181.10.6.4.99.104.1.2	DisplayString	read-only	This is name mirrors the sensor_group_configuration.
STR sensorGroupStatusAttribute	1.3.6.1.4.1.3181.10.6.4.99.104.1.3	DisplayString	read-only	The name of the attribute measured. E.g. brightness, motion, switch.
I32 sensorGroupStatusNumAssignedSensors	1.3.6.1.4.1.3181.10.6.4.99.104.1.4	Integer32	read-only	Number of sensors that are configured for this group.
I32 sensorGroupStatusNumFailedSensors	1.3.6.1.4.1.3181.10.6.4.99.104.1.5	Integer32	read-only	Number of sensors that have not responded as expected.
INT sensorGroupStatusGroupState	1.3.6.1.4.1.3181.10.6.4.99.104.1.6	INTEGER	read-only	Informs when not all sensors operate as expected.
STR sensorGroupStatusMinimumPeakHold	1.3.6.1.4.1.3181.10.6.4.99.104.1.7	DisplayString	read-only	Minimum value ever reported in this group since last value clear.
STR sensorGroupStatusMinimumValue	1.3.6.1.4.1.3181.10.6.4.99.104.1.8	DisplayString	read-only	Minimum value out of all sensors that report to this group.
STR sensorGroupStatusAverageValue	1.3.6.1.4.1.3181.10.6.4.99.104.1.9	DisplayString	read-only	Average value out of all sensors that report to this group. Uses the number of reporting sensors to calculate the average.
STR sensorGroupStatusMaximumValue	1.3.6.1.4.1.3181.10.6.4.99.104.1.10	DisplayString	read-only	Maximum value out of all sensors that report to this group.
STR sensorGroupStatusMaximumPeakHold	1.3.6.1.4.1.3181.10.6.4.99.104.1.11	DisplayString	read-only	Maximum value ever reported in this group since last value clear.
STR sensorGroupStatusTotalValue	1.3.6.1.4.1.3181.10.6.4.99.104.1.12	DisplayString	read-only	The total sum of all individual sensor values in this group.
I32 sensorGroupStatusLowerBoundaryReached	1.3.6.1.4.1.3181.10.6.4.99.104.1.13	Integer32	read-only	Number of sensors that have reached their lower threshold. A value of 0 means no sensor has reached a lower boundary.
I32 sensorGroupStatusUpperBoundaryReached	1.3.6.1.4.1.3181.10.6.4.99.104.1.14	Integer32	read-only	Number of sensors that have reached their upper threshold. A value of 0 means no sensor has reached an upper boundary.
I32 sensorGroupStatusUpdatingSensorIndex	1.3.6.1.4.1.3181.10.6.4.99.104.1.15	Integer32	read-only	Indicates the index to the sensor_list which has caused the latest group update.
INT sensorGroupStatusCacheStatus	1.3.6.1.4.1.3181.10.6.4.99.104.1.16	INTEGER	read-only	Indicates if this attribute is saved even upon system power loss or reboot.
C32 sensorGroupStatusLastUpdate	1.3.6.1.4.1.3181.10.6.4.99.104.1.17	Counter32	read-only	Indicates the time when this group status was last updated.

RFC description

Microsens private MIB for Generation 6 Ethernet Switches with SmartOffice solution configuration and director management.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (SmartOffice building-automation feature) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-SMARTOFFICE-MIB

What Is G6-SMARTOFFICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description