G6-IP-MIB

All MIBs › G6-IP-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for IP interface configuration, routing, and address management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-IP-MIB?

G6-IP-MIB is a MICROSENS private MIB for the Generation 6 (G6) family of Ethernet switches, covering IP-layer configuration and diagnostic tools on the switch's management interface. It exposes IPv4 configuration (DHCP mode, static IP address and subnet mask) alongside built-in diagnostic utilities: ping test, traceroute, DNS lookup, and the ARP table. Its monitoring value is mainly in configuration/software status of the management network stack and in the diagnostic objects themselves, which let an operator actively test reachability and name resolution as a health check on the switch's own IP connectivity. It appears to be a self-contained MICROSENS private MIB without stated dependency on standard IP-MIB/IF-MIB, though it parallels their functionality. It is deployed on MICROSENS G6 industrial/enterprise Ethernet switches wherever remote IP-based management is used. Engineers can download the G6-IP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-IP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6 Ethernet switch

Monitoring Examples

An administrator would read v4ConfigDhcpMode, v4ConfigStaticDeviceIp, and v4ConfigStaticSubnetMask from v4ConfigTable to confirm the switch's management IP is configured as expected, and use ipArpTable to check whether the switch has resolved a neighboring device's MAC address. Triggering ipPingTest or ipTraceRoute remotely would help diagnose a management-network reachability problem without needing console access, and ipDnsLookup would confirm the switch's DNS resolution is functioning if it relies on hostnames for logging or NTP servers. ipHostname and ipLocalMtu round out basic IP identity/MTU visibility.

What Can Be Monitored

IPv4/DHCP configuration status
static IP address and subnet mask
ARP table entries
ping/traceroute/DNS diagnostic results

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
device	1.3.6.1.4.1.3181.10.6.1			Microsens private MIB for Generation 6 Ethernet Switches
ip	1.3.6.1.4.1.3181.10.6.1.22
STR ipPingTest	1.3.6.1.4.1.3181.10.6.1.22.1	DisplayString	read-write	Supply an IP address to ping for reachability testing.
STR ipTraceRoute	1.3.6.1.4.1.3181.10.6.1.22.2	DisplayString	read-write	Supply an IP address to trace route testing.
STR ipDnsLookup	1.3.6.1.4.1.3181.10.6.1.22.3	DisplayString	read-write	Supply a hostname or web address to query for its ip address.
STR ipArpTable	1.3.6.1.4.1.3181.10.6.1.22.4	DisplayString	read-write	Displays the content of the ARP table used for management access.
STR ipHostname	1.3.6.1.4.1.3181.10.6.1.22.5	DisplayString	read-write	Defines the local hostname.
I32 ipLocalMtu	1.3.6.1.4.1.3181.10.6.1.22.6	Integer32	read-write	Defines MTU value for locally generated data.
v4ConfigTable	1.3.6.1.4.1.3181.10.6.1.22.7		not-accessible	This section configures IP version 4 fixed IP settings or enables use of DHCP alternatively.
v4ConfigEntry	1.3.6.1.4.1.3181.10.6.1.22.7.1		not-accessible
INT v4ConfigIndex	1.3.6.1.4.1.3181.10.6.1.22.7.1.1	INTEGER	not-accessible	Automatically generated
INT v4ConfigDhcpMode	1.3.6.1.4.1.3181.10.6.1.22.7.1.2	INTEGER	read-write	Enable DHCP to automatically retrieve an IP address and subnet mask. Also DHCP may be used to supply a CLI script file reference to be used on assignment.
OCT v4ConfigStaticDeviceIp	1.3.6.1.4.1.3181.10.6.1.22.7.1.3	OCTET STRING	read-write	Static device IP address. When DHCP is enabled, DHCP has preference over this setting.
OCT v4ConfigStaticSubnetMask	1.3.6.1.4.1.3181.10.6.1.22.7.1.4	OCTET STRING	read-write	Static subnet mask. When DHCP is enabled, DHCP has preference over this setting.
OCT v4ConfigStaticGateway	1.3.6.1.4.1.3181.10.6.1.22.7.1.5	OCTET STRING	read-write	Static default gateway IP address. When DHCP is enabled, DHCP has preference over this setting.
OCT v4ConfigStaticDnsServer	1.3.6.1.4.1.3181.10.6.1.22.7.1.6	OCTET STRING	read-write	Static domain name server IP address. When DHCP is enabled, DHCP has preference over this setting.
OCT v4ConfigSecondaryDeviceIp	1.3.6.1.4.1.3181.10.6.1.22.7.1.7	OCTET STRING	read-write	Alternative IP address for management access. Not required in most installations.
OCT v4ConfigSecondarySubnetMask	1.3.6.1.4.1.3181.10.6.1.22.7.1.8	OCTET STRING	read-write	This subnet mask applies to secondary ip address.
INT v4ConfigDefaultAddressSelection	1.3.6.1.4.1.3181.10.6.1.22.7.1.9	INTEGER	read-write	This parameter defines which own ip address is used for outgoing packets generated by the device. This only applies when a secondary_device_ip is configured.
v6ConfigTable	1.3.6.1.4.1.3181.10.6.1.22.8		not-accessible	This section configures IP version 6 fixed IP settings or enables use of automatic configuration alternatively.
v6ConfigEntry	1.3.6.1.4.1.3181.10.6.1.22.8.1		not-accessible
INT v6ConfigIndex	1.3.6.1.4.1.3181.10.6.1.22.8.1.1	INTEGER	not-accessible	Automatically generated
INT v6ConfigEnableIpv6	1.3.6.1.4.1.3181.10.6.1.22.8.1.2	INTEGER	read-write	General enable of IPv6 management access functionality.
INT v6ConfigEnableIcmpAutoAddress	1.3.6.1.4.1.3181.10.6.1.22.8.1.3	INTEGER	read-write	Decides if an ICMP assigned IPv6 address is accepted.
INT v6ConfigEnableDhcpAutoAddress	1.3.6.1.4.1.3181.10.6.1.22.8.1.4	INTEGER	read-write	Decides if an DHCP assigned IPv6 address is accepted.
v6AddressTable	1.3.6.1.4.1.3181.10.6.1.22.9		not-accessible	Defines as many static IPv6 address entries as desired.
v6AddressEntry	1.3.6.1.4.1.3181.10.6.1.22.9.1		not-accessible
INT v6AddressIndex	1.3.6.1.4.1.3181.10.6.1.22.9.1.1	INTEGER	not-accessible	Automatically generated
STR v6AddressIp	1.3.6.1.4.1.3181.10.6.1.22.9.1.2	DisplayString	read-write	IPv6 address
v4StatusTable	1.3.6.1.4.1.3181.10.6.1.22.100		not-accessible	This section shows a summary of IPv4 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP.
v4StatusEntry	1.3.6.1.4.1.3181.10.6.1.22.100.1		not-accessible
INT v4StatusIndex	1.3.6.1.4.1.3181.10.6.1.22.100.1.1	INTEGER	not-accessible	Automatically generated
OCT v4StatusDynamicDeviceIp	1.3.6.1.4.1.3181.10.6.1.22.100.1.2	OCTET STRING	read-only	Currently used device IP address.
OCT v4StatusDynamicSubnetMask	1.3.6.1.4.1.3181.10.6.1.22.100.1.3	OCTET STRING	read-only	Currently used subnet mask.
OCT v4StatusDynamicGateway	1.3.6.1.4.1.3181.10.6.1.22.100.1.4	OCTET STRING	read-only	Currently used gateway IP address.
OCT v4StatusDynamicDnsServer1	1.3.6.1.4.1.3181.10.6.1.22.100.1.5	OCTET STRING	read-only	Currently used domain name server IP address.
OCT v4StatusDynamicDnsServer2	1.3.6.1.4.1.3181.10.6.1.22.100.1.6	OCTET STRING	read-only	Alternate currently used domain name server IP address.
OCT v4StatusDynamicDnsServer3	1.3.6.1.4.1.3181.10.6.1.22.100.1.7	OCTET STRING	read-only	Alternate currently used domain name server IP address.
OCT v4StatusDynamicDnsServer4	1.3.6.1.4.1.3181.10.6.1.22.100.1.8	OCTET STRING	read-only	Alternate currently used domain name server IP address.
OCT v4StatusOutgoingDeviceIp	1.3.6.1.4.1.3181.10.6.1.22.100.1.9	OCTET STRING	read-only	Reflects the value v4_config.default_address_selection setting.
v6StatusTable	1.3.6.1.4.1.3181.10.6.1.22.101		not-accessible	This section shows a summary of IPv6 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP or ICMP.
v6StatusEntry	1.3.6.1.4.1.3181.10.6.1.22.101.1		not-accessible
INT v6StatusIndex	1.3.6.1.4.1.3181.10.6.1.22.101.1.1	INTEGER	not-accessible	Automatically generated
OCT v6StatusIp	1.3.6.1.4.1.3181.10.6.1.22.101.1.2	OCTET STRING	read-only	IPv6 address.
INT v6StatusScope	1.3.6.1.4.1.3181.10.6.1.22.101.1.3	INTEGER	read-only	Indicates the scope this IP is valid.
INT v6StatusState	1.3.6.1.4.1.3181.10.6.1.22.101.1.4	INTEGER	read-only	Indicates the state of this IP.

RFC description

MICROSENS Generation 6 IP management tools including ping, traceroute, and DNS lookups.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (management IP config/ping/traceroute/DNS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-IP-MIB

What Is G6-IP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description