G6-SNMP-MIB

All MIBs › G6-SNMP-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Protocol: SNMP, Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for SNMP agent configuration including community strings, trap targets, and v3 users.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-SNMP-MIB?

G6-SNMP-MIB is a MICROSENS private MIB for Generation 6 Ethernet switches covering the switch's own SNMP agent configuration and basic system identity, effectively the switch's equivalent of a private system/SNMP-config MIB. It exposes device identity information (system description, name, location, contact, object ID) plus SNMPv1/v2 community configuration. This is primarily a configuration/software-status MIB, letting an operator confirm the switch's identity fields and SNMP access settings are correctly provisioned, foundational for any other monitoring of the device to work at all. It parallels the standard SNMPv2-MIB system group and SNMP-COMMUNITY-MIB concepts, though not explicitly declared as depending on them. It is deployed on every MICROSENS G6 switch as part of baseline SNMP management setup. Engineers can download the G6-SNMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-SNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6 Ethernet switch

Monitoring Examples

An administrator would read deviceInfoSysName, deviceInfoSysLocation, and deviceInfoSysContact from deviceInfoTable to confirm a switch's identity fields are set correctly for inventory purposes, and check deviceInfoSysObjectId to identify the exact hardware variant when scripting device-specific polling. v1v2ConfigTable, keyed by v1v2ConfigIndex, would be reviewed when troubleshooting why an NMS cannot poll the switch, to confirm the expected community string is configured. deviceInfoSysDescription gives a quick text summary of hardware/software version useful in an inventory sweep.

What Can Be Monitored

system identity (name, location, contact)
system description/object ID
SNMPv1/v2 community configuration

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
management	1.3.6.1.4.1.3181.10.6.3			Microsens private MIB for Generation 6 Ethernet Switches
snmp	1.3.6.1.4.1.3181.10.6.3.65
deviceInfoTable	1.3.6.1.4.1.3181.10.6.3.65.1		not-accessible	SNMP version MIB-2 variables
deviceInfoEntry	1.3.6.1.4.1.3181.10.6.3.65.1.1		not-accessible
INT deviceInfoIndex	1.3.6.1.4.1.3181.10.6.3.65.1.1.1	INTEGER	not-accessible	Automatically generated
STR deviceInfoSysDescription	1.3.6.1.4.1.3181.10.6.3.65.1.1.2	DisplayString	read-only	Device description. This value is SNMP accessible as sysDescr.
STR deviceInfoSysName	1.3.6.1.4.1.3181.10.6.3.65.1.1.3	DisplayString	read-write	Devicename as assigned by customer. This value is SNMP accessible as sysName.
STR deviceInfoSysLocation	1.3.6.1.4.1.3181.10.6.3.65.1.1.4	DisplayString	read-write	Location of this device as assigned by customer. This value is SNMP accessible as sysLocation.
STR deviceInfoSysGroup	1.3.6.1.4.1.3181.10.6.3.65.1.1.5	DisplayString	read-write	Customer defined group definition. Note: This field does not have a MIB-2 counterpart.
STR deviceInfoSysContact	1.3.6.1.4.1.3181.10.6.3.65.1.1.6	DisplayString	read-write	Contact person for this device as required by customer. This value is SNMP accessible as sysContact.
STR deviceInfoSysObjectId	1.3.6.1.4.1.3181.10.6.3.65.1.1.7	DisplayString	read-only	Response to SNMP sysObject request.
v1v2ConfigTable	1.3.6.1.4.1.3181.10.6.3.65.2		not-accessible	SNMP version V1 / V2 variables
v1v2ConfigEntry	1.3.6.1.4.1.3181.10.6.3.65.2.1		not-accessible
INT v1v2ConfigIndex	1.3.6.1.4.1.3181.10.6.3.65.2.1.1	INTEGER	not-accessible	Automatically generated
INT v1v2ConfigEnableSnmpV1	1.3.6.1.4.1.3181.10.6.3.65.2.1.2	INTEGER	read-write	Only when enabled will SNMP V1 requests be responded to. May be disabled when only secure SNMP V3 access is allowed.
INT v1v2ConfigEnableSnmpV2c	1.3.6.1.4.1.3181.10.6.3.65.2.1.3	INTEGER	read-write	Only when enabled will SNMP V2C requests be responded to. May be disabled when only secure SNMP V3 access is allowed.
STR v1v2ConfigGetCommunity	1.3.6.1.4.1.3181.10.6.3.65.2.1.4	DisplayString	read-write	Community string to enable V1/V2c get commands.
STR v1v2ConfigSetCommunity	1.3.6.1.4.1.3181.10.6.3.65.2.1.5	DisplayString	read-write	Community string to enable V1/V2c set commands.
STR v1v2ConfigSnmpV1v2Username	1.3.6.1.4.1.3181.10.6.3.65.2.1.6	DisplayString	read-write	SNMP v1/v2 normally only provides light security by means of the community strings. Additional V3 like security can be applied by setting this field to any user.name defined in the access section. The access restrictions defined for the selected user also apply to the SNMP V1/v2 access when the user name is specified here. When no username or an invalid user name is configured, snmp access is blocked.
INT v1v2ConfigPermitV1v2SetCommands	1.3.6.1.4.1.3181.10.6.3.65.2.1.7	INTEGER	read-write	When disabled SNMP sets (writes) are declined and no modifications to the system via unsecure SNMP V1/V2 can occur.
v3ConfigTable	1.3.6.1.4.1.3181.10.6.3.65.3		not-accessible	SNMP version V3 variables
v3ConfigEntry	1.3.6.1.4.1.3181.10.6.3.65.3.1		not-accessible
INT v3ConfigIndex	1.3.6.1.4.1.3181.10.6.3.65.3.1.1	INTEGER	not-accessible	Automatically generated
INT v3ConfigEnableSnmpV3	1.3.6.1.4.1.3181.10.6.3.65.3.1.2	INTEGER	read-write	Only when enabled will SNMP V3 requests be responded to. To limit access to SNMP V3 only, disable SNMP V1 and V2 access in the configuration.
INT v3ConfigSecurityModel	1.3.6.1.4.1.3181.10.6.3.65.3.1.3	INTEGER	read-write	Selects if user based or view based security model is used.
STR v3ConfigSnmpEngineId	1.3.6.1.4.1.3181.10.6.3.65.3.1.4	DisplayString	read-write	Administratively assigned part of the computed engine id. Here the used MAC address can be used to ensure a unique value.
STR v3ConfigTrapEngineId	1.3.6.1.4.1.3181.10.6.3.65.3.1.5	DisplayString	read-write	This engine id is usedfor outgoing SNMP v3 traps. The value is treated as hexadecimal characters. The associated trap receiver must match this sequence or may be setup to ignore the engine id altogether. Default value defines 80000c6d which represents the our IANA value in hex followed by 03 indicating that a MAC is following. The remaining 12 character represent the MAC address o fthis device.
browserTable	1.3.6.1.4.1.3181.10.6.3.65.4		not-accessible	SNMP browser actions
browserEntry	1.3.6.1.4.1.3181.10.6.3.65.4.1		not-accessible
INT browserIndex	1.3.6.1.4.1.3181.10.6.3.65.4.1.1	INTEGER	not-accessible	Automatically generated
STR browserGet	1.3.6.1.4.1.3181.10.6.3.65.4.1.2	DisplayString	read-write	Invokes SNMP GET command at other device. Easiest syntax: ..get hostname OID. Type = (nothing) for basic help and = ? for extensive help.
STR browserNext	1.3.6.1.4.1.3181.10.6.3.65.4.1.3	DisplayString	read-write	Invokes SNMP GETNEXT command at other device. It will display the next OID following the given one. Syntax: ..get -v 2c -c community hostname OID. Hostname can be symbolic or IP address.
STR browserSet	1.3.6.1.4.1.3181.10.6.3.65.4.1.4	DisplayString	read-write	Invokes SNMP SET command at other device. Easiest syntax: ..set hostname OID type value. Check examples shown with = (enter).
STR browserWalk	1.3.6.1.4.1.3181.10.6.3.65.4.1.5	DisplayString	read-write	Invokes SNMP MIBWALK command at other device. Basic syntax: = IP_address. To see MIB-II system group type = IP system. WARNING: an unlimited mib walk may take a long time. Even when the output is cancelled, the walk will continue to the end. During this time other action commands may not operate!
U32 snmpEngineBoots	1.3.6.1.4.1.3181.10.6.3.65.100	Unsigned32	read-only	Number of reboots of SNMP engine since system reboot.
U32 snmpEngineRuntime	1.3.6.1.4.1.3181.10.6.3.65.101	Unsigned32	read-only	Runtime of SNMP engine in seconds.

RFC description

Provides SNMP MIB-2 variables and management information for Microsens Generation 6 Ethernet switches.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (SNMP agent config/system identity) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-SNMP-MIB

What Is G6-SNMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description