G6-WIFI-MIB

All MIBs › G6-WIFI-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Technology: Wireless, Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for integrated Wi-Fi access point configuration and wireless client management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-WIFI-MIB?

G6-WIFI-MIB is a MICROSENS GmbH & Co. KG proprietary MIB managing Wi-Fi access points, firewall rules, and interface/IP status on Generation 6 Ethernet switches with wireless capability. Its objects cover an access-point table (index), an interface table (index), a firewall-configuration table (index), a firewall-rules table (index), a status table (index), and an IPv4-status table (index). As a configuration/status MIB it lets an administrator manage attached access points and firewall rules on a MICROSENS Generation 6 switch. It is deployed on MICROSENS Generation 6 Ethernet switches (Wi-Fi module). Engineers can download the G6-WIFI-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-WIFI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS Generation 6 Ethernet switches (Wi-Fi module)

Monitoring Examples

An administrator checks accessPointTable and firewallRulesTable to confirm attached access points and firewall rule configuration on a MICROSENS Generation 6 switch.

What Can Be Monitored

access point inventory and firewall rule configuration

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
device	1.3.6.1.4.1.3181.10.6.1			Microsens private MIB for Generation 6 Ethernet Switches
wifi	1.3.6.1.4.1.3181.10.6.1.98
INT wifiEnableWifi	1.3.6.1.4.1.3181.10.6.1.98.1	INTEGER	read-write	Generally enable the access point and its wireless interface.
accessPointTable	1.3.6.1.4.1.3181.10.6.1.98.2		not-accessible	Basic settings of the access point.
accessPointEntry	1.3.6.1.4.1.3181.10.6.1.98.2.1		not-accessible
INT accessPointIndex	1.3.6.1.4.1.3181.10.6.1.98.2.1.1	INTEGER	not-accessible	Automatically generated
STR accessPointHostname	1.3.6.1.4.1.3181.10.6.1.98.2.1.2	DisplayString	read-write	Access point hostname.
OCT accessPointDeviceIp	1.3.6.1.4.1.3181.10.6.1.98.2.1.3	OCTET STRING	read-write	Static device IP address of the access point.
OCT accessPointSubnetMask	1.3.6.1.4.1.3181.10.6.1.98.2.1.4	OCTET STRING	read-write	Static subnet mask.
OCT accessPointGateway	1.3.6.1.4.1.3181.10.6.1.98.2.1.5	OCTET STRING	read-write	Default gateway IP address. When DHCP is enabled, DHCP has preference over this setting.
STR accessPointUpdateFirmware	1.3.6.1.4.1.3181.10.6.1.98.2.1.6	DisplayString	read-write	Update the access point firmware. When no file name is supplied, the latest version is automatically selected. Alternatively, a specific file name can be supplied to use another version. Use Management.files.firmware.display_files to view a list of available files under the AP section.
STR accessPointReboot	1.3.6.1.4.1.3181.10.6.1.98.2.1.7	DisplayString	read-write	This command will restart the access point only. All wireless communication will be disrupted for about a minute! Syntax: reboot = CONFIRM.
interfaceTable	1.3.6.1.4.1.3181.10.6.1.98.3		not-accessible	This table defines the Ethernet interface available via Wifi
interfaceEntry	1.3.6.1.4.1.3181.10.6.1.98.3.1		not-accessible
INT interfaceIndex	1.3.6.1.4.1.3181.10.6.1.98.3.1.1	INTEGER	not-accessible	Automatically generated
STR interfaceCountryCode	1.3.6.1.4.1.3181.10.6.1.98.3.1.2	DisplayString	read-write	International country code. Use DE for Germany, FR for france, etc.
STR interfaceSsid	1.3.6.1.4.1.3181.10.6.1.98.3.1.3	DisplayString	read-write	Defines the name under which the access point can be reached. This will be displayed as network name.
STR interfaceEnterPresharedKey	1.3.6.1.4.1.3181.10.6.1.98.3.1.4	DisplayString	read-write	Enter the password required to access the network. No spaces are permitted and at least 8 character are required.
STR interfaceEncryptedPresharedKey	1.3.6.1.4.1.3181.10.6.1.98.3.1.5	DisplayString	read-write	Encrypted form of the entered key. This is automatically filled in when the enter_fa_auth command is executed.
INT interfaceExposeSsid	1.3.6.1.4.1.3181.10.6.1.98.3.1.6	INTEGER	read-write	Defines whether the network can be detected or is hidden.
INT interfaceEncryption	1.3.6.1.4.1.3181.10.6.1.98.3.1.7	INTEGER	read-write
INT interfaceDhcpServer	1.3.6.1.4.1.3181.10.6.1.98.3.1.8	INTEGER	read-write	Enable DHCP server to automatically provide an IP address to the attached wifi devices.
OCT interfaceDhcpStartAddress	1.3.6.1.4.1.3181.10.6.1.98.3.1.9	OCTET STRING	read-write	Lowest address served.
I32 interfaceDhcpNumberOfAddresses	1.3.6.1.4.1.3181.10.6.1.98.3.1.10	Integer32	read-write	The number of IP addresses served starting from the dhcp_start_address
U32 interfaceChannelNumber	1.3.6.1.4.1.3181.10.6.1.98.3.1.11	Unsigned32	read-write	Zero is automatic selection.
INT interfaceChannelWidth	1.3.6.1.4.1.3181.10.6.1.98.3.1.12	INTEGER	read-write
firewallConfigTable	1.3.6.1.4.1.3181.10.6.1.98.4		not-accessible	Each entry of this variable table defines the details of one test case.
firewallConfigEntry	1.3.6.1.4.1.3181.10.6.1.98.4.1		not-accessible
INT firewallConfigIndex	1.3.6.1.4.1.3181.10.6.1.98.4.1.1	INTEGER	not-accessible	Automatically generated
INT firewallConfigEnableIngressFirewall	1.3.6.1.4.1.3181.10.6.1.98.4.1.2	INTEGER	read-write	When disabled the ingress_firewall table is not in effect. This is intended for test purposes only.
INT firewallConfigEnableEgressFirewall	1.3.6.1.4.1.3181.10.6.1.98.4.1.3	INTEGER	read-write	When disabled the ingress_firewall table is not in effect. This is intended for test purposes only.
INT firewallConfigDropInvalidPackets	1.3.6.1.4.1.3181.10.6.1.98.4.1.4	INTEGER	read-write	Drop invalid packets, not matching any active connection.
I32 firewallConfigSynRateLimiting	1.3.6.1.4.1.3181.10.6.1.98.4.1.5	Integer32	read-write	Defines how many SYN request are accepted per second. When the limit is reached, a SYN flooding attack is assumed and the port is protected. The value 0 disables the rate limit check.
INT firewallConfigUseSynCookies	1.3.6.1.4.1.3181.10.6.1.98.4.1.6	INTEGER	read-write	SYN cookie is a technique used to resist SYN flooding attacks.
INT firewallConfigTcpWindowScaling	1.3.6.1.4.1.3181.10.6.1.98.4.1.7	INTEGER	read-write	Enable TCP window scaling.
firewallRulesTable	1.3.6.1.4.1.3181.10.6.1.98.5		not-accessible	Firewall settings for traffic ingressing on the wifi interface.
firewallRulesEntry	1.3.6.1.4.1.3181.10.6.1.98.5.1		not-accessible
INT firewallRulesIndex	1.3.6.1.4.1.3181.10.6.1.98.5.1.1	INTEGER	not-accessible	Automatically generated
STR firewallRulesIncomingAclList	1.3.6.1.4.1.3181.10.6.1.98.5.1.2	DisplayString	read-write	Name of the ACL (access control list) which declares which ACL applies to incoming traffic (redirects). Several ACL may be specified with a comma separated list. Example acl1, otherlist
INT firewallRulesIncomingAclDefault	1.3.6.1.4.1.3181.10.6.1.98.5.1.3	INTEGER	read-write	Defines which action is taken when none of the ACL records matches. Default is deny which blocks all traffic.
STR firewallRulesOutgoingAclList	1.3.6.1.4.1.3181.10.6.1.98.5.1.4	DisplayString	read-write	Name of the ACL (access control list) which declares which ACL applies to incoming traffic (redirects). Several ACL may be specified with a comma separated list. Example acl1, otherlist
INT firewallRulesOutgoingAclDefault	1.3.6.1.4.1.3181.10.6.1.98.5.1.5	INTEGER	read-write	Defines which action is taken when none of the ACL records matches. Default is deny which blocks all traffic.
statusTable	1.3.6.1.4.1.3181.10.6.1.98.100		not-accessible	Indicates basic WIFI releated status inormation
statusEntry	1.3.6.1.4.1.3181.10.6.1.98.100.1		not-accessible
INT statusIndex	1.3.6.1.4.1.3181.10.6.1.98.100.1.1	INTEGER	not-accessible	Automatically generated
INT statusOverallStatus	1.3.6.1.4.1.3181.10.6.1.98.100.1.2	INTEGER	read-only	Indicates if WIFI module is operational.
U32 statusNumberOfConnections	1.3.6.1.4.1.3181.10.6.1.98.100.1.3	Unsigned32	read-only
ipV4StatusTable	1.3.6.1.4.1.3181.10.6.1.98.101		not-accessible	This section shows a summary of IPv4 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP.
ipV4StatusEntry	1.3.6.1.4.1.3181.10.6.1.98.101.1		not-accessible
INT ipV4StatusIndex	1.3.6.1.4.1.3181.10.6.1.98.101.1.1	INTEGER	not-accessible	Automatically generated
OCT ipV4StatusDynamicDeviceIp	1.3.6.1.4.1.3181.10.6.1.98.101.1.2	OCTET STRING	read-only	Currently used access point IP address.
OCT ipV4StatusDynamicSubnetMask	1.3.6.1.4.1.3181.10.6.1.98.101.1.3	OCTET STRING	read-only	Currently used access point subnet mask.
OCT ipV4StatusDynamicGateway	1.3.6.1.4.1.3181.10.6.1.98.101.1.4	OCTET STRING	read-only	Currently used access point gateway IP address.

RFC description

Generational 6 WiFi device management MIB for monitoring wireless access point status, radio parameters, and WLAN performance.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (Wi-Fi module/access points) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-WIFI-MIB

What Is G6-WIFI-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description