FSM726S-MIB

All MIBs › FSM726S-MIB

Category: Vendor: Netgear

Description: MIB for the FSM726S managed Fast Ethernet switch, providing port, VLAN, and device management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FSM726S-MIB?

FSM726S-MIB is a vendor MIB for the FSM726S, a managed Fast Ethernet switch, providing objects to configure and monitor its ports, VLANs, and overall device state. As a switch management MIB it generally exposes categories of data such as per-port link status and speed/duplex settings, VLAN membership tables, and device identity/system information. Its monitoring role centers on hardware status of the switch itself, notably port up/down and link condition, and device-level identification useful for confirming firmware/hardware inventory, though the specific object names were not available for this entry. No module description or sample objects were supplied, so any dependency on standard MIBs like IF-MIB or BRIDGE-MIB is inferred rather than confirmed from source text. It would typically be deployed in a small-to-midsize wiring closet or workgroup network using this switch for basic Layer 2 Fast Ethernet connectivity. Network engineers evaluating or troubleshooting this functionality can download the FSM726S-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FSM726S-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear FSM726S managed Fast Ethernet switch

Monitoring Examples

No sample object names were provided for this MIB, so a concrete polling example using real object identifiers cannot be constructed without inventing them. In general, an admin managing an FSM726S would be expected to monitor per-port link state and VLAN assignment tables, but the exact table/object names require access to the actual MIB source.

What Can Be Monitored

port link status
VLAN configuration
switch identity/firmware information

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
commEntry	1.3.6.1.4.1.4526.1.1.1.1.1		not-accessible	A list of SNMP Community properties
INT commGet	1.3.6.1.4.1.4526.1.1.1.1.1.3	INTEGER	read-write	The GET permission for the community. A (1) indicates a GET enable. A (2) indicates a GET disable.
INT commIndex	1.3.6.1.4.1.4526.1.1.1.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
STR commName	1.3.6.1.4.1.4526.1.1.1.1.1.2	DisplayString	read-write	The name of this SNMP Community Entry.
INT commSet	1.3.6.1.4.1.4526.1.1.1.1.1.4	INTEGER	read-write	The SET permission for the community. A (1) indicates a SET enable. A (2) indicates a SET disable.
INT commStatus	1.3.6.1.4.1.4526.1.1.1.1.1.6	INTEGER	read-write	The RowStatus for the community entry.
commTable	1.3.6.1.4.1.4526.1.1.1.1		not-accessible	A list of SNMP Community Entries
INT commTrap	1.3.6.1.4.1.4526.1.1.1.1.1.5	INTEGER	read-write	The TRAP permission for the community. A (1) indicates a TRAP enable. A (2) indicates a TRAP disable.
IP configAuthServerIpAddress	1.3.6.1.4.1.4526.1.1.11.40	IpAddress	read-write	The IP Address of the server used for 802.1x authentication.
STR configAuthServerSharedSecret	1.3.6.1.4.1.4526.1.1.11.41	DisplayString	read-write	A string of characters used in the RADIUS password encryption process by 802.1x authentication.
IP configBootFtpServerIp	1.3.6.1.4.1.4526.1.1.11.4	IpAddress	read-write	The FTP server's IP address used for downloading the boot image
STR configBootImageFileName	1.3.6.1.4.1.4526.1.1.11.5	DisplayString	read-write	The path and filename of the boot image to download
INT configBootMode	1.3.6.1.4.1.4526.1.1.11.3	INTEGER	read-write	Defines the method used for downloading the image when reset.
INT configDiffServDSCP	1.3.6.1.4.1.4526.1.1.11.31.1.1	INTEGER	read-only	A DSCP value (0 - 63).
configDiffServEntry	1.3.6.1.4.1.4526.1.1.11.31.1		not-accessible	An enterprise specific DSCP entry.
INT configDiffServPriority	1.3.6.1.4.1.4526.1.1.11.31.1.2	INTEGER	read-write	The DSCP's current priority setting.
configDiffServTable	1.3.6.1.4.1.4526.1.1.11.31		not-accessible	A list of DSCP Priorities.
IP configGateway	1.3.6.1.4.1.4526.1.1.11.18	IpAddress	read-write	The Gatway Address for the unit.
INT configHighPriorityOptimization	1.3.6.1.4.1.4526.1.1.11.25	INTEGER	read-write	Enable or disable high priority optimization.
INT configIGMPOnOff	1.3.6.1.4.1.4526.1.1.11.23	INTEGER	read-write	Enable or disable the IGMP protocol within the switch.
IP configIpAddress	1.3.6.1.4.1.4526.1.1.11.16	IpAddress	read-write	The IP Address for the RDU box.
INT configIpAssignmentMode	1.3.6.1.4.1.4526.1.1.11.12	INTEGER	read-write	Indicates whether the device address is assigned by the user (manual), BootP, or DHCP.
INT configIpFilter	1.3.6.1.4.1.4526.1.1.11.35	INTEGER	read-write	Determines if access to the device is limited to only those IP addresses specified in the configIpFilterTable.
configIpFilterEntry	1.3.6.1.4.1.4526.1.1.11.36.1		not-accessible	An enterprise specific IP filter entry.
IP configIpFilterIpAddress	1.3.6.1.4.1.4526.1.1.11.36.1.1	IpAddress	read-only	An IP address which is allowed access to this device.
INT configIpFilterStatus	1.3.6.1.4.1.4526.1.1.11.36.1.2	INTEGER	read-write	The status of an entry in the IP filter Table. Only a subset of the rowstatus variables (active, destroy) are available.
configIpFilterTable	1.3.6.1.4.1.4526.1.1.11.36		not-accessible	A list of IP addresses allowed access to this device.
INT configMirroringOnOff	1.3.6.1.4.1.4526.1.1.11.8	INTEGER	read-write	Enable or disable port mirroring.
INT configMirrorMon	1.3.6.1.4.1.4526.1.1.11.10	INTEGER	read-write	When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
INT configMirrorSrc	1.3.6.1.4.1.4526.1.1.11.9	INTEGER	read-write	When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled.
IP configNetMask	1.3.6.1.4.1.4526.1.1.11.17	IpAddress	read-write	The network mask for the RDU box.
STR configPasswordAdmin	1.3.6.1.4.1.4526.1.1.11.15	DisplayString	write-only	The adminstrator password
INT configPasswordEncryption	1.3.6.1.4.1.4526.1.1.11.39	INTEGER	read-write	Determines when the password is written to the configuration file whether it is written as clear text or encrypted format.
INT configPasswordProtection	1.3.6.1.4.1.4526.1.1.11.38	INTEGER	read-write	Determines if a user must login before gaining access to the device.
MAC configPhysAddress	1.3.6.1.4.1.4526.1.1.11.13	MacAddress	read-only	The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station.
INT configPort	1.3.6.1.4.1.4526.1.1.11.6.1.1	INTEGER	read-write	A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber.
INT configPortAutoNegotiation	1.3.6.1.4.1.4526.1.1.11.6.1.14	INTEGER	read-write	The port will perform auto-negotiation to determine the port's duplex and data rate. When auto-negotiation is enabled, the negotiated duplex and data rate can be determined by configPortDuplexOper and configPortDataRateOper mib objects respectively.
INT configPortBroadcastControl	1.3.6.1.4.1.4526.1.1.11.6.1.20	INTEGER	read-write	The port's broadcast packets per second threshold. If the amount of broadcast packets exceeds this threshold, those packets will be dropped.
STR configPortComments	1.3.6.1.4.1.4526.1.1.11.6.1.13	DisplayString	read-write	May contain any comments related to a given port such as a user name or LAN segment.
INT configPortDataRate	1.3.6.1.4.1.4526.1.1.11.6.1.6	INTEGER	read-write	The port's desired transmission data rate.
INT configPortDataRateOper	1.3.6.1.4.1.4526.1.1.11.6.1.9	INTEGER	read-only	The port's operating transmission data rate.
INT configPortDefaultVlanId	1.3.6.1.4.1.4526.1.1.11.6.1.12	INTEGER	read-write	The port will add this vlan id tag to any incoming packet which is lacking a vlan id tag.
INT configPortDuplex	1.3.6.1.4.1.4526.1.1.11.6.1.3	INTEGER	read-write	The port's duplex desired state.
INT configPortDuplexOper	1.3.6.1.4.1.4526.1.1.11.6.1.8	INTEGER	read-only	The port's operating duplex state.
configPortEntry	1.3.6.1.4.1.4526.1.1.11.6.1		not-accessible	An enterprise specific interface entry.
INT configPortFastLink	1.3.6.1.4.1.4526.1.1.11.6.1.18	INTEGER	read-write	The port's FastLink option.
INT configPortFlowControl	1.3.6.1.4.1.4526.1.1.11.6.1.11	INTEGER	read-write	The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled.
INT configPortFlowControlOper	1.3.6.1.4.1.4526.1.1.11.6.1.16	INTEGER	read-only	The port's operating flow control state.
INT configPortGBIC	1.3.6.1.4.1.4526.1.1.11.6.1.17	INTEGER	read-write	Port Type.
INT configPortPriority	1.3.6.1.4.1.4526.1.1.11.6.1.19	INTEGER	read-write	The port's current flow control state.
INT configPortStateOper	1.3.6.1.4.1.4526.1.1.11.6.1.10	INTEGER	read-only	The port's current state.
configPortTable	1.3.6.1.4.1.4526.1.1.11.6		not-accessible	A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces.
IP configRadiusServerIpAddress	1.3.6.1.4.1.4526.1.1.11.28	IpAddress	read-write	The IP Address of the RADIUS server used for remote user authentication.
STR configRadiusSharedSecret	1.3.6.1.4.1.4526.1.1.11.29	DisplayString	read-write	A string of characters used in the RADIUS password encryption process.
INT configRestoreDefaults	1.3.6.1.4.1.4526.1.1.11.22	INTEGER	read-write	Restores the configuration of the unit to the original settings.
INT configSave	1.3.6.1.4.1.4526.1.1.11.19	INTEGER	read-write	Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing.
INT configTelnetConsole	1.3.6.1.4.1.4526.1.1.11.30	INTEGER	read-write	Enable or disable the telnet console.
INT configTftpOperation	1.3.6.1.4.1.4526.1.1.11.34	INTEGER	read-write	The tftp operation to perform. Either download a configuration to the unit or upload the current configuration to the tftp server. This object is to be used in conjunction with configTftpServerIpAddress and configTftpServerFileName.
STR configTftpServerFileName	1.3.6.1.4.1.4526.1.1.11.33	DisplayString	read-write	The filename, including the path, used to store or retrieve a configuration file from the tftp server. This object is to be used in conjunction with configTftpServerIpAddress and configTftpOperation.
IP configTftpServerIpAddress	1.3.6.1.4.1.4526.1.1.11.32	IpAddress	read-write	The IP Address of the tftp server used to upload and download configuration files. This object is to be used in conjunction with configTftpServerFileName and configTftpOperation.
INT configUserAuthenticationMode	1.3.6.1.4.1.4526.1.1.11.27	INTEGER	read-write	Determines whether the user password will be authenticated by the switch, a remote RADIUS server, or some combination of the two.
STR configUserName	1.3.6.1.4.1.4526.1.1.11.37	DisplayString	read-write	The users login Id.
STR configVerBootRomImage	1.3.6.1.4.1.4526.1.1.11.21	DisplayString	read-only	The Boot ROM version string
STR configVerHwChipSet	1.3.6.1.4.1.4526.1.1.11.2	DisplayString	read-only	The hardware chipset version string
STR configVerSwPrimary	1.3.6.1.4.1.4526.1.1.11.1	DisplayString	read-only	The software image version string
INT configWebOnOff	1.3.6.1.4.1.4526.1.1.11.24	INTEGER	read-write	Enable or disable the Web Interface.
fsm726s	1.3.6.1.4.1.4526.1.1
STR hostComm	1.3.6.1.4.1.4526.1.1.2.1.1.4	DisplayString	read-write	The name of the community this host belongs to.
hostEntry	1.3.6.1.4.1.4526.1.1.2.1.1		not-accessible	A list of SNMP Host properties
INT hostIndex	1.3.6.1.4.1.4526.1.1.2.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the Host Table. Sixteen entries are currently supported.
IP hostIP	1.3.6.1.4.1.4526.1.1.2.1.1.3	IpAddress	read-write	The IP Address for the host.
STR hostName	1.3.6.1.4.1.4526.1.1.2.1.1.2	DisplayString	read-write	The name of this Host Entry.
INT hostStatus	1.3.6.1.4.1.4526.1.1.2.1.1.5	INTEGER	read-write	The RowStatus for the community entry.
hostTable	1.3.6.1.4.1.4526.1.1.2.1		not-accessible	A list of SNMP Trusted Host Entries
INT miscReset	1.3.6.1.4.1.4526.1.1.3.2	INTEGER	read-write	Physically resets the unit - use with care. A (1) resets the unit, a (2) does nothing.
INT miscStatisticsReset	1.3.6.1.4.1.4526.1.1.3.3	INTEGER	read-write	Resets the units statistics. A (1) resets the unit, a (2) does nothing.
netgear	1.3.6.1.4.1.4526
netgearCommGroup	1.3.6.1.4.1.4526.1.1.1
netgearConfigGroup	1.3.6.1.4.1.4526.1.1.11
netgearHostGroup	1.3.6.1.4.1.4526.1.1.2
netgearMiscGroup	1.3.6.1.4.1.4526.1.1.3
netgearPortTrunkGroup	1.3.6.1.4.1.4526.1.1.14
netgearSpanGroup	1.3.6.1.4.1.4526.1.1.4
netgearVlanGroup	1.3.6.1.4.1.4526.1.1.13
portTrunkEntry	1.3.6.1.4.1.4526.1.1.14.1.1		not-accessible	A port trunk entry containing the trunk id and trunk members.
INT portTrunkId	1.3.6.1.4.1.4526.1.1.14.1.1.1	INTEGER	read-only	The port trunk identifier. The current range is from 1 to 4.
INT portTrunkMember	1.3.6.1.4.1.4526.1.1.14.1.1.2	INTEGER	read-only	A port trunk has four members.
INT portTrunkMemberValue	1.3.6.1.4.1.4526.1.1.14.1.1.3	INTEGER	read-write	A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member.
portTrunkTable	1.3.6.1.4.1.4526.1.1.14.1		not-accessible	A list of port trunks and their associated members.
snmpManagedSwitch	1.3.6.1.4.1.4526.1
INT spanOnOff	1.3.6.1.4.1.4526.1.1.4.1	INTEGER	read-write	Enable/Disable Spanning Tree. A (1) enables, a (2) disables.
vlanEntry	1.3.6.1.4.1.4526.1.1.13.1.1		not-accessible	A VLAN entry containing the VLAN id and name.
INT vlanId	1.3.6.1.4.1.4526.1.1.13.1.1.1	INTEGER	read-only	The VLAN identifier. A maximum of 64 VLANs is supported. The value must be from 1 to 4094.
STR vlanName	1.3.6.1.4.1.4526.1.1.13.1.1.2	DisplayString	read-write	The VLAN name associated with the VLAN Id.
vlanPortEntry	1.3.6.1.4.1.4526.1.1.13.2.1		not-accessible	Information pertaining to an individual port regarding to which VLAN it belongs.
INT vlanPortPortId	1.3.6.1.4.1.4526.1.1.13.2.1.1	INTEGER	read-only	A port identifier that is in the range of 1 to ifNumber.
INT vlanPortStatus	1.3.6.1.4.1.4526.1.1.13.2.1.3	INTEGER	read-write	The status of this port's association within this VLAN. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
vlanPortTable	1.3.6.1.4.1.4526.1.1.13.2		not-accessible	A list of ports and their associated VLAN.
INT vlanPortTaggedMode	1.3.6.1.4.1.4526.1.1.13.2.1.4	INTEGER	read-write	The tagged mode of a VLAN port.
INT vlanPortVlanId	1.3.6.1.4.1.4526.1.1.13.2.1.2	INTEGER	read-only	The VLAN identifier.
INT vlanStatus	1.3.6.1.4.1.4526.1.1.13.1.1.3	INTEGER	read-write	The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
vlanTable	1.3.6.1.4.1.4526.1.1.13.1		not-accessible	A list of the VLANs

RFC description

Manages NETGEAR FSM726S managed Ethernet switch configuration, communities, hosts, and spanning tree operations.

Start monitoring Netgear FSM726S switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FSM726S-MIB

What Is FSM726S-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description