GSM7312-RADIUS-MIB

All MIBs › GSM7312-RADIUS-MIB

Organization: Netgear

Last Updated: 2003-05-07

Category: Protocol: RADIUS, Vendor: Netgear

Description: Netgear GSM7312 switch MIB for RADIUS authentication and accounting server configuration and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GSM7312-RADIUS-MIB?

GSM7312-RADIUS-MIB is a Netgear enterprise MIB for the GSM7312 managed switch, defining objects for configuring RADIUS authentication and accounting servers used for network access control and administrative login. It exposes configuration data such as RADIUS server IP addresses, shared secrets, and timeout/retry settings, along with statistics counters tracking authentication and accounting request/response activity. Its monitoring relevance is around software/service status -- confirming whether the switch's configured RADIUS servers are reachable and successfully authenticating requests, since a failed RADIUS server can block 802.1X port authentication or administrative logins on the switch. It builds on the standard IETF RADIUS protocol (RFC 2865/2866) concepts, though it defines Netgear-specific management objects rather than reusing a public RADIUS MIB verbatim. It is typically deployed on Netgear GSM7312 managed switches in small-to-midsize enterprise networks using RADIUS for 802.1X port-based network access control or switch administration login. Engineers can download the GSM7312-RADIUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GSM7312-RADIUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear GSM7312 managed switch

Monitoring Examples

No specific sample object or table names are provided for this module (sample_objects is empty), and the module description is limited to 'The GSM7312 Radius MIB,' so a concrete polling example grounded in confirmed object names cannot be honestly given. It plausibly defines a RADIUS server address/priority table and authentication/accounting request-response counters consistent with standard switch RADIUS client configuration, but this cannot be confirmed from the supplied data.

What Can Be Monitored

RADIUS server configuration
RADIUS authentication request/response activity
RADIUS accounting activity
server reachability status

Imported Objects

From GSM7312-REF-MIB

gsm7312

MODULE-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
gsm7312Radius	1.3.6.1.4.1.4526.1.6.8			The GSM7312 Radius MIB
agentRadiusConfigGroup	1.3.6.1.4.1.4526.1.6.8.1
U32 agentRadiusMaxTransmit	1.3.6.1.4.1.4526.1.6.8.1.1	Unsigned32	read-write	Maximum number of retransmissions of a RADIUS request packet
U32 agentRadiusTimeout	1.3.6.1.4.1.4526.1.6.8.1.2	Unsigned32	read-write	Time out duration (in seconds) before packets are retransmitted
INT agentRadiusAccountingMode	1.3.6.1.4.1.4526.1.6.8.1.3	INTEGER	read-write	Identifies if RADIUS Accounting has been enabled or not
INT agentRadiusStatsClear	1.3.6.1.4.1.4526.1.6.8.1.4	INTEGER	read-write	When set to enable(1), all Radius statistics will be reset.
I32 agentRadiusAccountingIndexNextValid	1.3.6.1.4.1.4526.1.6.8.1.5	Integer32	read-only	Indicates the next valid index into the agentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusAccountingConfigTable	1.3.6.1.4.1.4526.1.6.8.1.6		not-accessible	Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
agentRadiusAccountingConfigEntry	1.3.6.1.4.1.4526.1.6.8.1.6.1		not-accessible	Entry consisting of configuration data for a Radius Accounting Server.
I32 agentRadiusAccountingServerIndex	1.3.6.1.4.1.4526.1.6.8.1.6.1.1	Integer32	not-accessible	Unique index of the configured RADIUS accounting server
IP agentRadiusAccountingServerAddress	1.3.6.1.4.1.4526.1.6.8.1.6.1.2	IpAddress	read-create	IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
U32 agentRadiusAccountingPort	1.3.6.1.4.1.4526.1.6.8.1.6.1.3	Unsigned32	read-write	Port number for the RADIUS accounting server. This object cannot be configured on row creation.
STR agentRadiusAccountingSecret	1.3.6.1.4.1.4526.1.6.8.1.6.1.4	DisplayString	read-write	Configured shared sercret for the RADIUS accounting server. This object cannot be configured on row creation.
ROW agentRadiusAccountingStatus	1.3.6.1.4.1.4526.1.6.8.1.6.1.5	RowStatus	read-create
I32 agentRadiusServerIndexNextValid	1.3.6.1.4.1.4526.1.6.8.1.7	Integer32	read-only	Indicates the next valid index into the agentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusServerConfigTable	1.3.6.1.4.1.4526.1.6.8.1.8		not-accessible	Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret
agentRadiusServerConfigEntry	1.3.6.1.4.1.4526.1.6.8.1.8.1		not-accessible	Entry consisting of configuration data for a Radius Server. Creation requires setting
I32 agentRadiusServerIndex	1.3.6.1.4.1.4526.1.6.8.1.8.1.1	Integer32	not-accessible	Unique index of the configured RADIUS server
IP agentRadiusServerAddress	1.3.6.1.4.1.4526.1.6.8.1.8.1.2	IpAddress	read-create	IP Address of the configured RADIUS server. This object cannot be changed after creation.
U32 agentRadiusServerPort	1.3.6.1.4.1.4526.1.6.8.1.8.1.3	Unsigned32	read-write	Port number for the RADIUS server. This object cannot be configured on row creation.
STR agentRadiusServerSecret	1.3.6.1.4.1.4526.1.6.8.1.8.1.4	DisplayString	read-write	Configured shared sercret for the RADIUS server. This object cannot be configured on row creation.
INT agentRadiusServerPrimaryMode	1.3.6.1.4.1.4526.1.6.8.1.8.1.5	INTEGER	read-write	Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set Primary. This object cannot be configured on row creation.
INT agentRadiusServerCurrentMode	1.3.6.1.4.1.4526.1.6.8.1.8.1.6	INTEGER	read-only	Indicate if the RADIUS server is the current server in user for authentication.
INT agentRadiusServerMsgAuth	1.3.6.1.4.1.4526.1.6.8.1.8.1.7	INTEGER	read-write	Enable or disable the message authenticator attribute for this RADIUS server. This object cannot be configured on row creation.
ROW agentRadiusServerStatus	1.3.6.1.4.1.4526.1.6.8.1.8.1.8	RowStatus	read-create

RFC description

Manages RADIUS authentication and accounting configuration on NETGEAR GSM7312 managed switches, enabling administrators to configure RADIUS servers for network access control and user authentication.

Start monitoring Netgear GSM7312 managed switch (RADIUS AAA) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GSM7312-RADIUS-MIB

What Is GSM7312-RADIUS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description