All MIBs › FSM726S-MIB › configMirrorMon
configMirrorMon
Module: FSM726S-MIB
OID (symbolic): FSM726S-MIB::configMirrorMon
OID (numeric): 1.3.6.1.4.1.4526.1.1.11.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
What is configMirrorMon?
When port mirroring is enabled, this identifies the monitoring port (valid range 1 to the number of interfaces) that receives the copied traffic from configMirrorSrc. Admins connect their packet-capture device to this port to observe the mirrored source port's traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.1.1.11.10 snmpwalk -v2c -c public <target> FSM726S-MIB::configMirrorMon
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.1.1.11.10.1 snmpget -v2c -c public <target> FSM726S-MIB::configMirrorMon.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.1.1.11.10.1 i <value>
Start monitoring Netgear FSM726S switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FSM726S-MIB::configMirrorMon OID value, configure state conditions and alerts, and monitor any Netgear FSM726S switch from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.1 | snmpManagedSwitch | FSM726S-MIB |
| 1.3.6.1.4.1.4526.1.1 | fsm726s | FSM726S-MIB |
| 1.3.6.1.4.1.4526.1.1.11 | netgearConfigGroup | FSM726S-MIB |
| 1.3.6.1.4.1.4526.1.1.11.10 | configMirrorMon | FSM726S-MIB |