| OID symbolic | OID numeric | Type | Access | Description |
|---|
| f10CopyConfigMib | 1.3.6.1.4.1.6027.3.5 | | | Dell Networking OS Copy Config MIB provides copying of running-config to
to startup-config and vice-versa, and Dell Networking OS files to local
disk or other system via ftp or tftp. |
| f10CopyConfigObjects | 1.3.6.1.4.1.6027.3.5.1 | | | |
| f10CopyConfig | 1.3.6.1.4.1.6027.3.5.1.1 | | | |
| f10CopyTable | 1.3.6.1.4.1.6027.3.5.1.1.1 | | not-accessible | A table of config-copy requests. |
| f10CopyEntry | 1.3.6.1.4.1.6027.3.5.1.1.1.1 | | not-accessible | A config-copy request.
To use this copy on NMS, user must first query the MIB.
if the query returns the result of the previous copied and
there is no pending copy operation, user can submit a SNMP
SET with a random number as index with the appropraite
information as specified by this MIB and the row status as
CreateAndGo.
The system will only keep the last 5 copy requests as the history.
If there are ten entries in the copy request table, the subsequent
copy request will replace the existing one in the copy table.
1) To copy running-config from local directory to startup-config. Set the following
mib objects in the copy table
copySrcFileType : runningConfig (2)
copyDestFileType : startupConfig (3)
2) To copy startup-config from local directory to a remote site. Set the following
mib objects in the copy table
copySrcFileType : startupConfig (3)
copyDestFileType : ftosFile (1)
copyDestFileLocation : ftp (4)
copyDestFileName : /user/tester1/ftp/
copyServerAddress : 172.20.10.123
copyUserName : tester1
copyUserPassword : mypasswd
3) To copy a file from local directory to a remote site. Set the following
mib objects in the copy table
copySrcFileType : ftosFile (1)
copySrcFileLocation : slot0 (2)
copySrcFileName : NVTRACE_LOG_DIR/LP4-nvtrace-0
copyDestFileType : ftosFile (1)
copyDestFileLocation : ftp (4)
copyDestFileName : /usr/tester1/trace/backup/LP4-nvtrace-0
copyServerAddress : 172.20.10.123
copyUserName : tester1
copyUserPassword : mypasswd |
| INT copyConfigIndex | 1.3.6.1.4.1.6027.3.5.1.1.1.1.1 | INTEGER | not-accessible | To initiate a config copy request, user should
assign a positive random value as an index. |
| F10 copySrcFileType | 1.3.6.1.4.1.6027.3.5.1.1.1.1.2 | F10ConfigFileType | read-write | Specifies the type of file to copy from.
if the copySrcFileType is runningConfig(2) or
startupConfig(3), the default F10ConfigFileLocation is
flash(1).
If the copySrcFileType has the value of
ftosFile(1), it is expected that the copySrcFileLocation
and copySrcFileName must also be spcified. The three
objects together will uniquely identify the source file. |
| F10 copySrcFileLocation | 1.3.6.1.4.1.6027.3.5.1.1.1.1.3 | F10ConfigFileLocation | read-write | Specifies the location of source file.
If the copySrcFileType has the value of
ftosFile(1), it is expected that the copySrcFileType
and copySrcFileName must also be spcified. The three
objects together will uniquely identify the source file.
If the copySrcFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAddress, copyUserName, and copyUserPassword
also be spcified. |
| STR copySrcFileName | 1.3.6.1.4.1.6027.3.5.1.1.1.1.4 | DisplayString | read-write | The file name (including the path, if applicable) of
the file. If copySourceFileType is set to runningConfig or
startupConfig, copySrcFileName is not needed. |
| F10 copyDestFileType | 1.3.6.1.4.1.6027.3.5.1.1.1.1.5 | F10ConfigFileType | read-write | Specifies the type of file to copy to.
if the copyDestFileType is runningConfig(2) or
startupConfig(3), the default f10DestFileLocation is
flash(1).
If the copyDestFileType has the value of
ftosFile(1), it is expected that the copyDestFileLocation
and copyDestFileName must also be spcified. The three
objects together will uniquely identify the destination file. |
| F10 copyDestFileLocation | 1.3.6.1.4.1.6027.3.5.1.1.1.1.6 | F10ConfigFileLocation | read-write | Specifies the location of destination file.
If the copyDestFileType has the value of
ftosFile(1), it is expected that the copyDestFileType
and copyDestFileName must also be spcified. The three
objects together will uniquely identify the destination file.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAddress, copyUserName, and copyUserPassword
also be spcified. |
| STR copyDestFileName | 1.3.6.1.4.1.6027.3.5.1.1.1.1.7 | DisplayString | read-write | Specifies the location of destination file.
If the copyDestFileType has the value of
ftosFile(1), it is expected that the f10CopyDestFileTyp
and copyDestFileLocation must also be spcified. The three
objects together will uniquely identify the source file.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAddress, copyUserName, and copyUserPassword
also be spcified. |
| IP copyServerAddress | 1.3.6.1.4.1.6027.3.5.1.1.1.1.8 | IpAddress | read-write | The ip address of the tftp server from (or to)
which to copy the configuration file.
Values of 0.0.0.0 or FF.FF.FF.FF for
copyServerAddress are not allowed.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAddress, copyUserName, and copyUserPassword
also be spcified. |
| STR copyUserName | 1.3.6.1.4.1.6027.3.5.1.1.1.1.9 | DisplayString | read-write | Remote user name for copy via ftp, or scp.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAddress, copyUserName, and copyUserPassword
also be spcified. |
| STR copyUserPassword | 1.3.6.1.4.1.6027.3.5.1.1.1.1.10 | DisplayString | read-write | Password used by ftp, scp for copying a
file to an ftp/scp server.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAddress, copyUserName, and copyUserPassword
also be spcified. |
| F10 copyState | 1.3.6.1.4.1.6027.3.5.1.1.1.1.11 | F10ConfigCopyState | read-only | The state of config-copy operation. |
| TIK copyTimeStarted | 1.3.6.1.4.1.6027.3.5.1.1.1.1.12 | TimeTicks | read-only | The timetick when the copy started. |
| TIK copyTimeCompleted | 1.3.6.1.4.1.6027.3.5.1.1.1.1.13 | TimeTicks | read-only | The timetick when the copy completed. |
| F10 copyFailCause | 1.3.6.1.4.1.6027.3.5.1.1.1.1.14 | F10ConfigCopyFailCause | read-only | The reason a config-copy request failed. |
| ROW copyEntryRowStatus | 1.3.6.1.4.1.6027.3.5.1.1.1.1.15 | RowStatus | read-write | The state of the copy operation.
Uses CreateAndGo when you are performing the copy.
The state is set to active when the copy is completed. |
| IPt copyServerInetAddressType | 1.3.6.1.4.1.6027.3.5.1.1.1.1.16 | InetAddressType | read-write | The address type of copyServerInetAddress.
Only ipv4 (1), ipv6 (2) and dns (16) types
are supported. |
| IP copyServerInetAddress | 1.3.6.1.4.1.6027.3.5.1.1.1.1.17 | InetAddress | read-write | The IP address of the address ftp/tftp/scp server
from or to which to copy the configuration file.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login
information copyUserName and copyUserPassword
also be spcified. |
| f10CopyConfigTraps | 1.3.6.1.4.1.6027.3.5.1.2 | | | |
| copyAlarmMibNotifications | 1.3.6.1.4.1.6027.3.5.1.2.0 | | | |
| NTF copyConfigCompleted | 1.3.6.1.4.1.6027.3.5.1.2.0.1 | | | The agent generate this trap when a
copy operational is completed. |
| copyAlarmVariable | 1.3.6.1.4.1.6027.3.5.1.2.1 | | | |
| INT copyAlarmLevel | 1.3.6.1.4.1.6027.3.5.1.2.1.1 | INTEGER | accessible-for-notify | the message warning level |
| OCT copyAlarmString | 1.3.6.1.4.1.6027.3.5.1.2.1.2 | OCTET STRING | accessible-for-notify | An generic string value in the TRAP object |
| INT copyAlarmIndex | 1.3.6.1.4.1.6027.3.5.1.2.1.3 | INTEGER | accessible-for-notify | the index of the current copy.
Indicates the index of the current copy, i.e. copyConfigIndex of f10CopyTable.
Set to '-1' if copy executed by CLI |
