HPN-ICF-TRANSCEIVER-INFO-MIB

All MIBs › HPN-ICF-TRANSCEIVER-INFO-MIB

Last Updated: 2013-07-23

Category: Hardware and Environment, Network Interfaces, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Monitors optical transceiver (SFP/XFP) Tx/Rx power, temperature, and vendor information on HP/Comware switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-TRANSCEIVER-INFO-MIB?

HPN-ICF-TRANSCEIVER-INFO-MIB is an H3C/HPE Networking (ICF) proprietary MIB displaying pluggable-transceiver information per interface. Its table, keyed by interface, records hardware type, transceiver type, wavelength, vendor name, serial number, fiber-diameter type, transfer distance, a diagnostic flag, current/max/min TX power, current/max/min RX power, temperature, voltage, bias current, and temperature/voltage high/low alarm and warning thresholds. As a hardware-performance MIB it lets an administrator watch a transceiver's optical/electrical health against alarm/warning thresholds on an H3C/HPE ICF device. It is deployed on H3C/HPE Networking (ICF-based) devices with pluggable optical transceivers. Engineers can download the HPN-ICF-TRANSCEIVER-INFO-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-TRANSCEIVER-INFO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/HPE Networking (ICF-based) devices (pluggable optical transceivers)

Monitoring Examples

An administrator monitors hpnicfTransceiverCurRXPower against hpnicfTransceiverTempLoAlarm-adjacent thresholds to catch a degrading transceiver on an H3C/HPE ICF device.

What Can Be Monitored

transceiver optical/electrical health vs. alarm/warning thresholds

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfTransceiver	1.3.6.1.4.1.11.2.14.11.15.2.70			The objects in this MIB module are used to display the information of transceiver on interface.
hpnicfTransceiverInfoAdm	1.3.6.1.4.1.11.2.14.11.15.2.70.1
hpnicfTransceiverInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1		not-accessible	This table show the information of transceiver on interface.
hpnicfTransceiverInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1		not-accessible	The entry of the hpnicfTransceiverInfoTable.
OCT hpnicfTransceiverHardwareType	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.1	OCTET STRING	read-only	Hardware type of the interface, such as SM(single mode).
OCT hpnicfTransceiverType	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.2	OCTET STRING	read-only	Type of the interface, such as SFP/XFP/GBIC.
I32 hpnicfTransceiverWaveLength	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.3	Integer32	read-only	Wave length of the interface, measured in nanometer.
OCT hpnicfTransceiverVendorName	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.4	OCTET STRING	read-only	Vendor name of the interface.
OCT hpnicfTransceiverSerialNumber	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.5	OCTET STRING	read-only	Serial number of the interface.
INT hpnicfTransceiverFiberDiameterType	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.6	INTEGER	read-only	The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.
I32 hpnicfTransceiverTransferDistance	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.7	Integer32	read-only	The maximal distance which the interface could transmit, measured in meter.
T/F hpnicfTransceiverDiagnostic	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.8	TruthValue	read-only	Indicating the digital diagnostic monitoring function .
I32 hpnicfTransceiverCurTXPower	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.9	Integer32	read-only	Indicating the current transmitted power . The unit is in hundredths of dBM.
I32 hpnicfTransceiverMaxTXPower	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.10	Integer32	read-only	Indicating the maximal transmitted power . The unit is in hundredths of dBM.
I32 hpnicfTransceiverMinTXPower	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.11	Integer32	read-only	Indicating the minimal transmitted power . The unit is in hundredths of dBM.
I32 hpnicfTransceiverCurRXPower	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.12	Integer32	read-only	Indicating the current received power . The unit is in hundredths of dBM.
I32 hpnicfTransceiverMaxRXPower	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.13	Integer32	read-only	Indicating the maximal received power . The unit is in hundredths of dBM.
I32 hpnicfTransceiverMinRXPower	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.14	Integer32	read-only	Indicating the minimal received power . The unit is in hundredths of dBM.
I32 hpnicfTransceiverTemperature	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.15	Integer32	read-only	Indicating the current temperature. The unit is Celsius centigrade.
I32 hpnicfTransceiverVoltage	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.16	Integer32	read-only	Indicating the current voltage . The unit is in hundredths of V
I32 hpnicfTransceiverBiasCurrent	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.17	Integer32	read-only	Indicating the current bias electric current . The unit is in hundredths of mA
I32 hpnicfTransceiverTempHiAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.18	Integer32	read-only	Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
I32 hpnicfTransceiverTempLoAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.19	Integer32	read-only	Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
I32 hpnicfTransceiverTempHiWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.20	Integer32	read-only	Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
I32 hpnicfTransceiverTempLoWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.21	Integer32	read-only	Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
I32 hpnicfTransceiverVccHiAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.22	Integer32	read-only	Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
I32 hpnicfTransceiverVccLoAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.23	Integer32	read-only	Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
I32 hpnicfTransceiverVccHiWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.24	Integer32	read-only	Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
I32 hpnicfTransceiverVccLoWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.25	Integer32	read-only	Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
I32 hpnicfTransceiverBiasHiAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.26	Integer32	read-only	Transceiver bias high alarm threshold limit in microamps.
I32 hpnicfTransceiverBiasLoAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.27	Integer32	read-only	Transceiver bias low alarm threshold limit in microamps.
I32 hpnicfTransceiverBiasHiWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.28	Integer32	read-only	Transceiver bias high warning threshold limit in microamps.
I32 hpnicfTransceiverBiasLoWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.29	Integer32	read-only	Transceiver bias low warning threshold limit in microamps.
I32 hpnicfTransceiverPwrOutHiAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.30	Integer32	read-only	Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hpnicfTransceiverPwrOutLoAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.31	Integer32	read-only	Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hpnicfTransceiverPwrOutHiWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.32	Integer32	read-only	Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt.
I32 hpnicfTransceiverPwrOutLoWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.33	Integer32	read-only	Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hpnicfTransceiverRcvPwrHiAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.34	Integer32	read-only	Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hpnicfTransceiverRcvPwrLoAlarm	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.35	Integer32	read-only	Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hpnicfTransceiverRcvPwrHiWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.36	Integer32	read-only	Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hpnicfTransceiverRcvPwrLoWarn	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.37	Integer32	read-only	Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
BIT hpnicfTransceiverErrors	1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38	Bits	read-only	Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31)
hpnicfTransceiverChannelTable	1.3.6.1.4.1.11.2.14.11.15.2.70.1.2		not-accessible	This table provides statistics about transceiver with multi-channel.
hpnicfTransceiverChannelEntry	1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1		not-accessible	The entry of the hpnicfTransceiverChannelTable.
I32 hpnicfTransceiverChannelIndex	1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.1	Integer32	not-accessible	The channel index of transceiver. Indicating one channel of the interface.
I32 hpnicfTransceiverChannelCurTXPower	1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.2	Integer32	read-only	Indicating the current transmission power. The unit is in hundredths of dBM.
I32 hpnicfTransceiverChannelCurRXPower	1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.3	Integer32	read-only	Indicating the current received power. The unit is in hundredths of dBM.
I32 hpnicfTransceiverChannelTemperature	1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.4	Integer32	read-only	Indicating the current temperature. The unit is Celsius centigrade.
I32 hpnicfTransceiverChannelBiasCurrent	1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.5	Integer32	read-only	Indicating the current bias electric current. The unit is in hundredths of mA.

RFC description

Displays optical transceiver information including diagnostics, power levels, temperature, and alarm thresholds on HP interfaces.

Start monitoring H3C/HPE Networking (ICF-based) device with pluggable optical transceivers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-TRANSCEIVER-INFO-MIB

What Is HPN-ICF-TRANSCEIVER-INFO-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description