FD-ONU-MIB

All MIBs › FD-ONU-MIB

Organization: epon eoc factory.

Last Updated: 2010-05-27

Category: Domain: DSL/xPON, Technology: EPON/PON, Vendor: C-Data

Description: C-Data (FD-series) Optical Network Unit MIB for managing ONU device registration, status, and performance on PON networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FD-ONU-MIB?

FD-ONU-MIB is a C-Data (FD-series) EPON vendor MIB, under the epon.fdOnu branch, that manages Optical Network Unit devices - but its scope is considerably broader than basic registration and status: alongside onuBaseManageTable (device type, serial, hardware/firmware revision, MAC, registered LLID count, online status, laser Rx/Tx power) and onuChipInfoTable, it includes per-port Layer 2 configuration (onuUniPortTable, onuPortVlanTable, onuAclRuleTable, onuQueueCfgTable, portEgressShappingTable, portIngressPolicingTable), IGMP snooping (igmpSnoopParaTable/igmpSnoopGroupTable), diagnostics (onuLoopTestTable, onuDynMacTable), and a substantial voice/Integrated Access Device (IAD) subsystem for ONUs that also serve as FTTH voice gateways - H.248/MEGACO signaling (h248ParamCfgTable, h248UserTIDTable, h248RtpTIDCfgTable), SIP signaling (sipParamCfgTable, sipUserCfgTable, sipDigitMapTable), and POTS line management (onuIADPOTSStatusTable, onuIADPOTSEnableTable, onuIADFaxCfgTable). This makes it a combined EPON-access-plus-VoIP-gateway MIB rather than a pure ONU status MIB, deployed on C-Data FD-series ONUs that bundle Ethernet, video, and analog voice service over a single PON drop, and administrators can download the FD-ONU-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FD-ONU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

C-Data FD-series EPON ONU (Optical Network Unit) devices, including voice-gateway variants

Monitoring Examples

An operator polls onuBaseManageTable for onuOnLineStatus and onuLaserRxPower on a subscriber's ONU, and separately checks onuIADPOTSStatusTable for that same ONU's voice ports; a healthy online status with strong received optical power but a POTS line reporting a fault points to the voice/IAD subsystem rather than the PON link as the source of a reported 'no dial tone' complaint.

What Can Be Monitored

ONU registration and online status
ONU optical Rx/Tx power levels
per-port VLAN, ACL, and QoS (queue/shaping/policing) configuration
IGMP snooping group membership
H.248/SIP voice signaling configuration
POTS line status and fax configuration

Imported Objects

From EPON-EOC-MIB

DeviceOperation
DeviceStatus
DeviceType
OperSwitch
epon	OBJECT-IDENTITY

From FD-OLT-MIB

linkId	OBJECT-TYPE
oltId	OBJECT-TYPE

From FD-SYSTEM-MIB

ponCardSlotId

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
fdOnu	1.3.6.1.4.1.34592.1.3.4			ONU mib module
onuBaseManageTable	1.3.6.1.4.1.34592.1.3.4.1		not-accessible
onuBaseManageEntry	1.3.6.1.4.1.34592.1.3.4.1.1		not-accessible
I32 onuId	1.3.6.1.4.1.34592.1.3.4.1.1.1	Integer32	not-accessible	Serial No allocated for each ONU which register on each PON port for identify them conveniencly. The ID allocated for each ONU will stay until the ONU is deleted.
DEV onuDeviceType	1.3.6.1.4.1.34592.1.3.4.1.1.2	DeviceType	read-only
OCT onuFactorySerial	1.3.6.1.4.1.34592.1.3.4.1.1.3	OCTET STRING	read-only	Description.
STR onuUserInfo	1.3.6.1.4.1.34592.1.3.4.1.1.4	DisplayString	read-write
STR onuHwRev	1.3.6.1.4.1.34592.1.3.4.1.1.5	DisplayString	read-only
STR onuFwRev	1.3.6.1.4.1.34592.1.3.4.1.1.6	DisplayString	read-only
MAC onuBaseMac	1.3.6.1.4.1.34592.1.3.4.1.1.7	MacAddress	read-only
I32 maxAllowedLLIDs	1.3.6.1.4.1.34592.1.3.4.1.1.9	Integer32	read-only
I32 registeredLLIDNum	1.3.6.1.4.1.34592.1.3.4.1.1.10	Integer32	read-only
DEV onuOnLineStatus	1.3.6.1.4.1.34592.1.3.4.1.1.11	DeviceStatus	read-only
OPE onuUserTrafficEnable	1.3.6.1.4.1.34592.1.3.4.1.1.12	OperSwitch	read-write
I32 onuRangeValue	1.3.6.1.4.1.34592.1.3.4.1.1.13	Integer32	read-only
I32 supportUniPorts	1.3.6.1.4.1.34592.1.3.4.1.1.14	Integer32	read-only	Description.
DEV onuOperation	1.3.6.1.4.1.34592.1.3.4.1.1.32	DeviceOperation	read-write	Only off line ONUs can be delete by seting the value of this object to 'delete'
INT onuUpgradeStat	1.3.6.1.4.1.34592.1.3.4.1.1.33	INTEGER	read-only	Description.
OCT onuLinkIdMap	1.3.6.1.4.1.34592.1.3.4.1.1.34	OCTET STRING	read-only	Description.
INT onuMgmtType	1.3.6.1.4.1.34592.1.3.4.1.1.35	INTEGER	read-only	Description.
I32 onuLaserRxPower	1.3.6.1.4.1.34592.1.3.4.1.1.36	Integer32	read-only	Description.
I32 onuLaserTxPower	1.3.6.1.4.1.34592.1.3.4.1.1.37	Integer32	read-only	Description.
onuAdvancedManage	1.3.6.1.4.1.34592.1.3.4.2
onuChipInfoTable	1.3.6.1.4.1.34592.1.3.4.2.1		not-accessible
onuChipInfoEntry	1.3.6.1.4.1.34592.1.3.4.2.1.1		not-accessible
I32 onuChipProCode	1.3.6.1.4.1.34592.1.3.4.2.1.1.1	Integer32	read-only	Description.
I32 onuChipProVer	1.3.6.1.4.1.34592.1.3.4.2.1.1.2	Integer32	read-only	Description.
I32 onuChipId	1.3.6.1.4.1.34592.1.3.4.2.1.1.3	Integer32	read-only	Description.
I32 onuChipVer	1.3.6.1.4.1.34592.1.3.4.2.1.1.4	Integer32	read-only	Description.
I32 onuBootVer	1.3.6.1.4.1.34592.1.3.4.2.1.1.5	Integer32	read-only	Description.
I32 onuPersVer	1.3.6.1.4.1.34592.1.3.4.2.1.1.6	Integer32	read-only	Description.
I32 onuChipApp0Ver	1.3.6.1.4.1.34592.1.3.4.2.1.1.7	Integer32	read-only	Description.
I32 onuChipApp1Ver	1.3.6.1.4.1.34592.1.3.4.2.1.1.8	Integer32	read-only	Description.
I32 onuChipDiagVer	1.3.6.1.4.1.34592.1.3.4.2.1.1.9	Integer32	read-only	Description.
onuAdvancedConfigTable	1.3.6.1.4.1.34592.1.3.4.2.2		not-accessible	This table contain the information which is not normally used but may be usefull in some special circumstance
onuAdvancedConfigEntry	1.3.6.1.4.1.34592.1.3.4.2.2.1		not-accessible	Each entry in this table contain the information for one ONU
OCT onuAddiVlanEthType	1.3.6.1.4.1.34592.1.3.4.2.2.1.1	OCTET STRING	read-write	Description. Reserved. Additional Ethernet type to identify vlan frames. 0 1 2 3 --------------------------------------------- vlan EthType\| tag upstream \| tag downstream \| --------------------------------------------- 2byte 1byte 1byte vlan EthType: default 0x8100 tag upstream: 1->use this type to tag upstream, 0->untag tag downstream: 1->use this type to tag downstream, 0->untag
OPE onuRstpEnable	1.3.6.1.4.1.34592.1.3.4.2.2.1.2	OperSwitch	read-write	Description.
OPE onuLocalSwitch	1.3.6.1.4.1.34592.1.3.4.2.2.1.3	OperSwitch	read-write	Description.
OPE onuCatv	1.3.6.1.4.1.34592.1.3.4.2.2.1.4	OperSwitch	read-write	Description.
onuUniPortTable	1.3.6.1.4.1.34592.1.3.4.3		not-accessible
onuUniPortEntry	1.3.6.1.4.1.34592.1.3.4.3.1		not-accessible
INT uniPortId	1.3.6.1.4.1.34592.1.3.4.3.1.1	INTEGER	not-accessible
STR uniPortUserInfo	1.3.6.1.4.1.34592.1.3.4.3.1.2	DisplayString	read-write
INT uniPortLink	1.3.6.1.4.1.34592.1.3.4.3.1.3	INTEGER	read-only
OPE uniPortAutoNego	1.3.6.1.4.1.34592.1.3.4.3.1.4	OperSwitch	read-write
INT uniPortSpeed	1.3.6.1.4.1.34592.1.3.4.3.1.5	INTEGER	read-write
INT uniPortDuplex	1.3.6.1.4.1.34592.1.3.4.3.1.6	INTEGER	read-write
OPE uniPortFlowCtrl	1.3.6.1.4.1.34592.1.3.4.3.1.7	OperSwitch	read-write
I32 uniPortMacEntryLimit	1.3.6.1.4.1.34592.1.3.4.3.1.8	Integer32	read-write
I32 uniPortMacAgeTime	1.3.6.1.4.1.34592.1.3.4.3.1.9	Integer32	read-write	aging timeout, unit is 1s
INT uniPortFowardMode	1.3.6.1.4.1.34592.1.3.4.3.1.10	INTEGER	read-write
OPE uniPortEnable	1.3.6.1.4.1.34592.1.3.4.3.1.11	OperSwitch	read-write
INT uniPortRstpState	1.3.6.1.4.1.34592.1.3.4.3.1.12	INTEGER	read-only	onu port rstp state:normal or blocking
onuQueueCfgTable	1.3.6.1.4.1.34592.1.3.4.4		not-accessible
onuQueueCfgEntry	1.3.6.1.4.1.34592.1.3.4.4.1		not-accessible
OCT onuQueueCfgData	1.3.6.1.4.1.34592.1.3.4.4.1.1	OCTET STRING	read-write	contain all queue config information for one ONU. the value format is: Get/SET: -------------------------------------------------------------- \| value length \| number of links \| link0 queues \|queue0 size \|... -------------------------------------------------------------- 1 1 1 1 \| \| --------------------------------------------------------------------------------------------- ...\| port numbers \| port0 queues \| queue0 size \|...\|flooding queues \| flooding queue size \| --------------------------------------------------------------------------------------------- 1 1 1 1 1 \|\| \|\| para comment: value length: dont include itself's size port numbers: for FD104B, fixed value, 1 flooding queues: for now, fixed 1 flooding queue id:
onuAclRuleTable	1.3.6.1.4.1.34592.1.3.4.5		not-accessible
onuAclRuleEntry	1.3.6.1.4.1.34592.1.3.4.5.1		not-accessible
INT onuIntPortId	1.3.6.1.4.1.34592.1.3.4.5.1.1	INTEGER	not-accessible
OCT onuAclRuleCfgData	1.3.6.1.4.1.34592.1.3.4.5.1.2	OCTET STRING	read-write	onu ACL rule data format. when read or write, the data format is: ------------------------------------------------------------------------------- \| data length \| global flags \| rule numbers \| rule flag \| precedence \| action \| ------------------------------------------------------------------------------- 2 1 1 1 1 1 \|\| ----------------------------------------------------------------> para comment: data length: don't include the length area itself.
onuPortVlanTable	1.3.6.1.4.1.34592.1.3.4.6		not-accessible
onuPortVlanEntry	1.3.6.1.4.1.34592.1.3.4.6.1		not-accessible
INT onuPortId	1.3.6.1.4.1.34592.1.3.4.6.1.1	INTEGER	not-accessible	Description.
OCT onuPortVlanData	1.3.6.1.4.1.34592.1.3.4.6.1.2	OCTET STRING	read-write	Self defines data strucure for onu port vlan information. Data format: size(unit:byte)\| 1 2 1 2 2 ... -------------------------------------------------------------------------- para \| data length \|option bit\| forwarding policy \| pvid \| vlan number \|... -------------------------------------------------------------------------- 2 1 1 2 1 1 --------------------------------------------- ---------------------------------------------- \| vlan tag \|egress tag modification\| reserved\|...\|vlan tag \| egress tag modification \| reserved \| --------------------------------------------- ---------------------------------------------- \|\|...\|\| So, the total data length should be: 8+4*(vlan nun).
onuPortQos	1.3.6.1.4.1.34592.1.3.4.7
portEgressShappingTable	1.3.6.1.4.1.34592.1.3.4.7.1		not-accessible
portEgressShappingEntry	1.3.6.1.4.1.34592.1.3.4.7.1.1		not-accessible
INT scheduleAlgorithm	1.3.6.1.4.1.34592.1.3.4.7.1.1.1	INTEGER	read-write
I32 maxTrafficOutputRate	1.3.6.1.4.1.34592.1.3.4.7.1.1.2	Integer32	read-write
INT outputModule	1.3.6.1.4.1.34592.1.3.4.7.1.1.3	INTEGER	read-write	Description.
portIngressPolicingTable	1.3.6.1.4.1.34592.1.3.4.7.2		not-accessible
portIngressPolicingEntry	1.3.6.1.4.1.34592.1.3.4.7.2.1		not-accessible
INT policingTrafficType	1.3.6.1.4.1.34592.1.3.4.7.2.1.1	INTEGER	read-write
I32 maxTrafficInputRate	1.3.6.1.4.1.34592.1.3.4.7.2.1.2	Integer32	read-write
INT inputModule	1.3.6.1.4.1.34592.1.3.4.7.2.1.3	INTEGER	read-write	Description.
igmpSnooping	1.3.6.1.4.1.34592.1.3.4.8
igmpSnoopParaTable	1.3.6.1.4.1.34592.1.3.4.8.1		not-accessible
igmpSnoopParaEntry	1.3.6.1.4.1.34592.1.3.4.8.1.1		not-accessible
OCT igmpSnoopParaData	1.3.6.1.4.1.34592.1.3.4.8.1.1.1	OCTET STRING	read-write	IGMP SNOOPING paras value. format: -------------------------------------------------------------- \| robustness count \| last member query count \| port number \|... --------------------------------------------------------------- 1 1 1 ------------------------------------------------------------------------ \| groups num 1 \| relative queue 1 \|...\|groups num n \| relative queue n \| ------------------------------------------------------------------------ 1 1 1 1 -------------------------------------- \| qualifier bitmatp \| option bit map \| -------------------------------------- 2 1 para explain: para value range comment robust count: 0~12 last member count: 0~12 port number: for FD104B, port number is 4 groups number : 0~64 this two paras repeast port number times relative queue: qualifier bit: 0 reserved option bit map: 0 reserved
igmpSnoopGroupTable	1.3.6.1.4.1.34592.1.3.4.8.2		not-accessible
igmpSnoopGroupEntry	1.3.6.1.4.1.34592.1.3.4.8.2.1		not-accessible
OCT igmpSnoopGroupData	1.3.6.1.4.1.34592.1.3.4.8.2.1.1	OCTET STRING	read-write	igmp group data. this variable is used to add, delete or get igmp groups. the data contained in this variable is different for get and add/delete. when get, the data format is: ------------------------------------------------------------- \| group numbers \| group ip address \| port bit map \|.... repeat group number times ------------------------------------------------------------- 1 4 1 when add or delete, the data format is: ----------------------------------------------------------------- \| operate code \| group numbers \| group pvid \| port bit map \| ------------------------------------------------------------------ 1 1 2 4 para comment: operate code: 1->add, 2->delete
onuLoopTestTable	1.3.6.1.4.1.34592.1.3.4.9		not-accessible
onuLoopTestEntry	1.3.6.1.4.1.34592.1.3.4.9.1		not-accessible
OCT onuLoopTestData	1.3.6.1.4.1.34592.1.3.4.9.1.1	OCTET STRING	read-write	test cmd data, format: --------------------------------------------------------------- \| location \| frame number \| frame length \| reserved \| vlan tag \| --------------------------------------------------------------- 1 2 2 1 2 para comment: value range comment location: 1,2 frame number: 1~10000 frame length: 46~1500 reserved: 0 this area is not used for now, must be 0 vlan tag: 0~4094
OCT onuLoopTestResult	1.3.6.1.4.1.34592.1.3.4.9.1.2	OCTET STRING	read-only	loopback test results. Data Format: ----------------------------------------------------------------------------------------- \|status\|frames sent\|frames received ok\|corrupted frames\|min delay\|max delay\|average delay\| ----------------------------------------------------------------------------------------- 1 2 2 2 2 2 2 para comment: status: 1->finished ok 2->testing 3->time out 4->test command error
onuDynMac	1.3.6.1.4.1.34592.1.3.4.10
onuDynMacOperTable	1.3.6.1.4.1.34592.1.3.4.10.1		not-accessible
onuDynMacOperEntry	1.3.6.1.4.1.34592.1.3.4.10.1.1		not-accessible
INT onuDynMacOperation	1.3.6.1.4.1.34592.1.3.4.10.1.1.1	INTEGER	read-write
onuDynMacTable	1.3.6.1.4.1.34592.1.3.4.10.2		not-accessible
onuDynMacEntry	1.3.6.1.4.1.34592.1.3.4.10.2.1		not-accessible
I32 onuDynMacIndex	1.3.6.1.4.1.34592.1.3.4.10.2.1.1	Integer32	not-accessible	Administratorly assigned entry index object
MAC onuDynMacAddr	1.3.6.1.4.1.34592.1.3.4.10.2.1.2	MacAddress	read-only
onuVoiceService	1.3.6.1.4.1.34592.1.3.4.11
onuIADInfoTable	1.3.6.1.4.1.34592.1.3.4.11.1		not-accessible	IAD Info
onuIADInfoEntry	1.3.6.1.4.1.34592.1.3.4.11.1.1		not-accessible	IAD Info
MAC onuIADMac	1.3.6.1.4.1.34592.1.3.4.11.1.1.1	MacAddress	read-only	IAD MAC address
INT onuIADProtocol	1.3.6.1.4.1.34592.1.3.4.11.1.1.2	INTEGER	read-only	ProtocolSupported 0x00: H.248 0x01: SIP
STR onuIADSwVersion	1.3.6.1.4.1.34592.1.3.4.11.1.1.3	DisplayString	read-only	Iad Software Version
STR onuIADSwTime	1.3.6.1.4.1.34592.1.3.4.11.1.1.4	DisplayString	read-only	Iad software time Version time format uses: YYYYMMDDHHMMSS
I32 onuIADVoipNum	1.3.6.1.4.1.34592.1.3.4.11.1.1.5	Integer32	read-only	VoipUserCount Indicate POTS number of IAD module
onuIADParamCfgTable	1.3.6.1.4.1.34592.1.3.4.11.2		not-accessible	ONU IAD Global Parameter Co nfigure
onuIADParamCfgEntry	1.3.6.1.4.1.34592.1.3.4.11.2.1		not-accessible	ONU IAD Global Parameter Co nfigure
INT onuIADMode	1.3.6.1.4.1.34592.1.3.4.11.2.1.1	INTEGER	read-write	IP address configuration mode: 0x00: Static IP 0x01: DHCP 0x02: PPPoE/PPPOE+
IP onuIADIpAddr	1.3.6.1.4.1.34592.1.3.4.11.2.1.2	IpAddress	read-write	When Voice IP Mode= 0x00, indicate the device static configured IP address, otherwise, this field is invalid, and the value is 0x00.
IP onuIADNetMask	1.3.6.1.4.1.34592.1.3.4.11.2.1.3	IpAddress	read-write	When Voice IP Mode = 0x00, indicate the device static configured IP address mask, otherwise, this field is invalid, and the value is 0x00.
IP onuIADDefaultGw	1.3.6.1.4.1.34592.1.3.4.11.2.1.4	IpAddress	read-write	When Voice IP Mode = 0x00, indicate the device static configured IAD default GW, otherwise, the field is invalid, and the value is 0x00
INT onuIADPppoeMode	1.3.6.1.4.1.34592.1.3.4.11.2.1.5	INTEGER	read-write	PPPOE mode: 0x00: AUTO (default) 0x01: Challenge Handshake Authentication Protocol (CHAP) 0x02: Password Authentication Protocol (PAP)
STR onuIADPppoeUsrnm	1.3.6.1.4.1.34592.1.3.4.11.2.1.6	DisplayString	read-write	PPPOE username
STR onuIADPppoePw	1.3.6.1.4.1.34592.1.3.4.11.2.1.7	DisplayString	read-write	PPPOE password
INT onuIADTagMode	1.3.6.1.4.1.34592.1.3.4.11.2.1.8	INTEGER	read-write	Tagged flag Indicate whether Voice data uses tag, and the default is 0x01: 0x00: Pass through 0x01: Tag 0x02: VLAN stacking
I32 onuIADVoiceCVlan	1.3.6.1.4.1.34592.1.3.4.11.2.1.9	Integer32	read-write	Voice CVlan
I32 onuIADVoiceSVlan	1.3.6.1.4.1.34592.1.3.4.11.2.1.10	Integer32	read-write	Voice SVLAN If it is single layer of VLAN, the value is 0x00.
I32 onuIADVoicePriority	1.3.6.1.4.1.34592.1.3.4.11.2.1.11	Integer32	read-write	Voice Priority
onuIADH248Param	1.3.6.1.4.1.34592.1.3.4.11.3
h248ParamCfgTable	1.3.6.1.4.1.34592.1.3.4.11.3.1		not-accessible	Description.
h248ParamCfgEntry	1.3.6.1.4.1.34592.1.3.4.11.3.1.1		not-accessible	Description.
I32 h248MgPort	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.1	Integer32	read-write	MGPortNo The default is 2944.
IP h248MgcIp	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.2	IpAddress	read-write	MGCIP Active softswitch platform IP address.
I32 h248MgcPort	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.3	Integer32	read-write	MgcComPortNo Active softswitch platform port number.
IP h248BakMacIp	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.4	IpAddress	read-write	Backup MgcIp Backup softswitch platform IP address. If it is 0x00000000, dual homing is not enabled.
I32 h248BakMgcPort	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.5	Integer32	read-write	Backup MgcComPortNo If it is 0x0000, dual homing is not enabled.
INT h248ActiveMgc	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.6	INTEGER	read-write	Active MGC 0x00: Backup softswitch platform 0x01: Active softswitch platform When SET, ONU ignores this field. When GET, ONU returns registered MGC.
INT h248RegMode	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.7	INTEGER	read-write	RegMode 0x00: IP address 0x01: domain name 0x02: device name
STR h248MID	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.8	DisplayString	read-write	MID If RegMode=0x00, the field is empty. If the registration mode is device name or domain name, the corresponding strings are padded.
INT h248HbMode	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.9	INTEGER	read-write	Heartbeat Mode 0x00: Close 0x01: H.248-CTC standard Notify command
I32 h248HbCycle	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.10	Integer32	read-write	HeartbeatCycle The default is 60s.
I32 h248HbCount	1.3.6.1.4.1.34592.1.3.4.11.3.1.1.11	Integer32	read-write	HeartbeatCount The default is 3.
h248UserTIDTable	1.3.6.1.4.1.34592.1.3.4.11.3.2		not-accessible	Description.
h248UserTIDEntry	1.3.6.1.4.1.34592.1.3.4.11.3.2.1		not-accessible	Description.
I32 onuVoipPortId	1.3.6.1.4.1.34592.1.3.4.11.3.2.1.1	Integer32	read-only	Description.
STR h248UserTIDName	1.3.6.1.4.1.34592.1.3.4.11.3.2.1.2	DisplayString	read-write	User TID Name
h248RtpTIDCfgTable	1.3.6.1.4.1.34592.1.3.4.11.3.3		not-accessible	Description.
h248RtpTIDCfgEntry	1.3.6.1.4.1.34592.1.3.4.11.3.3.1		not-accessible	Description.
I32 h248RtpTIDNum	1.3.6.1.4.1.34592.1.3.4.11.3.3.1.1	Integer32	read-write	Number of RTP TID
STR h248RtpTIDPrefix	1.3.6.1.4.1.34592.1.3.4.11.3.3.1.2	DisplayString	read-write	RTP TID Prefix
I32 h248RtpTIDDigitBegin	1.3.6.1.4.1.34592.1.3.4.11.3.3.1.3	Integer32	read-write	RTP TID Digit Begin RTP TID digital portion start value
INT h248RtpTIDMode	1.3.6.1.4.1.34592.1.3.4.11.3.3.1.4	INTEGER	read-write	RTP TID Mode 0x00: alignment mode 0x01: non-alignment mode
I32 h248RtpTIDDigitLen	1.3.6.1.4.1.34592.1.3.4.11.3.3.1.5	Integer32	read-write	RTP TID Digit Length
h248RtpTIDInfoTable	1.3.6.1.4.1.34592.1.3.4.11.3.4		not-accessible	H248 RTP TID Info
h248RtpTIDInfoEntry	1.3.6.1.4.1.34592.1.3.4.11.3.4.1		not-accessible	H248 RTP TID Info
I32 h248RtpTIDCount	1.3.6.1.4.1.34592.1.3.4.11.3.4.1.1	Integer32	read-only	Number of RTP TID
STR h248FstRtpTIDName	1.3.6.1.4.1.34592.1.3.4.11.3.4.1.2	DisplayString	read-only	First RTP TID Name
onuIADSipParam	1.3.6.1.4.1.34592.1.3.4.11.4
sipParamCfgTable	1.3.6.1.4.1.34592.1.3.4.11.4.1		not-accessible	SIP Parameter Configure
sipParamCfgEntry	1.3.6.1.4.1.34592.1.3.4.11.4.1.1		not-accessible	SIP Parameter Configure
I32 sipMgPort	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.1	Integer32	read-write	MGPortNo The default is 5060.
IP sipProxySvrIp	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.2	IpAddress	read-write	SipProxyServIp Active SIP agent server IP address
I32 sipProxySvrPort	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.3	Integer32	read-write	SipProxyServComPortNo Active SIP agent server port number
IP sipBakProxySvrIp	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.4	IpAddress	read-write	BackupSipProxyServIp Backup SIP agent server IP address, if this field is 0x00000000, do not enable dual homing function.
I32 sipBakProxySvrPort	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.5	Integer32	read-write	BackupSipProxyServComPortNo Backup SIP agent server port number. If this field is 0x00000000, do not enable dual homing function.
IP sipActiveProxySvr	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.6	IpAddress	read-only	ActiveSipProxyServer When SET, ONU ignores to process this field. When GET, ONU returns registered MGC.
IP sipRegSvrIp	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.7	IpAddress	read-write	SipRegServIP Active SIP registration server IP address
I32 sipRegSvrPort	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.8	Integer32	read-write	SipRegServComPortNo Active SIP registration server port number
IP sipBakRegSvrIp	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.9	IpAddress	read-write	BackupSipRegServIp Backup SIP registration server IP address. If this field is 0x00000000, do not enable dual homing.
I32 sipBakRegSvrPort	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.10	Integer32	read-write	BackupSipRegServComPortNo Active SIP registration server port number. If this field is 0x00000000, do not enable dual homing.
IP sipOutBoundSvrIp	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.11	IpAddress	read-write	OutBoundServIP
I32 sipOutBoundSvrPort	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.12	Integer32	read-write	OutBoundServPortNo
I32 sipRegInterval	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.13	Integer32	read-write	SipRegIntervalSIP Registration refresh cycle, unit is second, and the default value is 3600s.
INT sipHbSwitch	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.14	INTEGER	read-write	HeartbeatSwitch 0x00: enable heartbeat switch 0x01: disable heartbeat switch
I32 sipHbCycle	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.15	Integer32	read-write	HeartbeatCycle the default value is 60s
I32 sipHbCount	1.3.6.1.4.1.34592.1.3.4.11.4.1.1.16	Integer32	read-write	HeartbeatCount the default value is 3
sipUserCfgTable	1.3.6.1.4.1.34592.1.3.4.11.4.2		not-accessible	SIP User Parameter Configure
sipUserCfgEntry	1.3.6.1.4.1.34592.1.3.4.11.4.2.1		not-accessible	SIP User Parameter Configure
STR sipUserAccount	1.3.6.1.4.1.34592.1.3.4.11.4.2.1.1	DisplayString	read-write	User Account User phone number, and should user ASCII code
STR sipUserName	1.3.6.1.4.1.34592.1.3.4.11.4.2.1.2	DisplayString	read-write	User name SIP port username, and should use ASCII code.
STR sipUserPasswd	1.3.6.1.4.1.34592.1.3.4.11.4.2.1.3	DisplayString	read-write	User Password SIP port password, and should use ASCII code.
sipDigitMapTable	1.3.6.1.4.1.34592.1.3.4.11.4.3		not-accessible	Description.
sipDigitMapEntry	1.3.6.1.4.1.34592.1.3.4.11.4.3.1		not-accessible	Description.
I32 sipDigitMapLen	1.3.6.1.4.1.34592.1.3.4.11.4.3.1.1	Integer32	read-write	Map length
STR sipDigitMap	1.3.6.1.4.1.34592.1.3.4.11.4.3.1.2	DisplayString	read-write	SIP DigitalMap SIP protocol digital map, ASCII code type
onuIADFaxCfgTable	1.3.6.1.4.1.34592.1.3.4.11.5		not-accessible	Fax/Modem Configure
onuIADFaxCfgEntry	1.3.6.1.4.1.34592.1.3.4.11.5.1		not-accessible	Description.
INT onuIADVoiceFaxMode	1.3.6.1.4.1.34592.1.3.4.11.5.1.1	INTEGER	read-write	VoiceT38Enable 0x00: voice passthrough mode (T30) 0x01: T38 mode
INT onuIADVoiceFaxControl	1.3.6.1.4.1.34592.1.3.4.11.5.1.2	INTEGER	read-write	VoiceFax/ModemControl At default, use negotiation mode. 0x00: negotiation mode 0x01: Auto VBD
onuIADOperTable	1.3.6.1.4.1.34592.1.3.4.11.6		not-accessible	IAD Operation Status
onuIADOperEntry	1.3.6.1.4.1.34592.1.3.4.11.6.1		not-accessible	IAD Operation Status
INT onuIADOperStatusSet	1.3.6.1.4.1.34592.1.3.4.11.6.1.1	INTEGER	read-write	iadOperation 0x00000000: Reregister for softswitch platform 0x00000001: Logout from softswitch platform 0x00000002: Reset, only for voice module
INT onuIADOperStatus	1.3.6.1.4.1.34592.1.3.4.11.6.1.2	INTEGER	read-only	iadOperStatus 0x00000000: Registering 0x00000001: Registration successful 0x00000002: IAD fault 0x00000003: logout 0x00000004: IAD is restarting
onuIADPOTSStatusTable	1.3.6.1.4.1.34592.1.3.4.11.7		not-accessible	POTS Status
onuIADPOTSStatusEntry	1.3.6.1.4.1.34592.1.3.4.11.7.1		not-accessible	POTS Status
INT onuIADPotsStatus	1.3.6.1.4.1.34592.1.3.4.11.7.1.1	INTEGER	read-only	IADPortStauts 0x00000000: port is registering 0x00000001: port is idle 0x00000002: pick up 0x00000003: dialing 0x00000004: ringing 0x00000005: ring back 0x00000006: connecting 0x00000007: connected 0x00000008: releasing connection 0x00000009: port registration failure 0x0000000A: port is not activated
INT onuIADPotsServiceState	1.3.6.1.4.1.34592.1.3.4.11.7.1.2	INTEGER	read-only	iadPortServiceState 0x00000000: endLocal, local end terminates service, caused by user disable port 0x00000001: endRemote, remote end terminates service, caused by MGC sends down command 0x00000002: endAuto, automatically terminate service, caused by MGC fault. 0x00000003: normal service normal
INT onuIADPotsCodeMode	1.3.6.1.4.1.34592.1.3.4.11.7.1.3	INTEGER	read-only	iadPortCodecMode 0x00000000: G.711 A 0x00000001: G.729 0x00000002: G.711U 0x00000003: G.723 0x00000004: G.726 0x00000005: T.38
INT onuIADPotsId	1.3.6.1.4.1.34592.1.3.4.11.7.1.4	INTEGER	not-accessible
onuIADPOTSEnableTable	1.3.6.1.4.1.34592.1.3.4.11.8		not-accessible	POTS Enable
onuIADPOTSEnableEntry	1.3.6.1.4.1.34592.1.3.4.11.8.1		not-accessible	POTS Enable
INT potsId	1.3.6.1.4.1.34592.1.3.4.11.8.1.1	INTEGER	read-only	Pots Id
INT onuIADPotsEnable	1.3.6.1.4.1.34592.1.3.4.11.8.1.2	INTEGER	read-write	IADPortEnable 1: disable 2: enable
fdOnuConformance	1.3.6.1.4.1.34592.1.3.4.15
fdOnuGroups	1.3.6.1.4.1.34592.1.3.4.15.1
fdOnuBaseManageGroup	1.3.6.1.4.1.34592.1.3.4.15.1.1			A collection of objects providing basic fd ONU management
fdOnuAdvanceManageGroup	1.3.6.1.4.1.34592.1.3.4.15.1.2			A collection of objects providing advanced ONU feature management
fdOnuPortParaGroup	1.3.6.1.4.1.34592.1.3.4.15.1.3			A collection of objects providing ONU port parameters management
onuIgmpSnoopGroup	1.3.6.1.4.1.34592.1.3.4.15.1.4			A collection of objects providing igmp snooping feature management
fdOnuLpTestGroup	1.3.6.1.4.1.34592.1.3.4.15.1.5			A collection of objects providing onu loopback test feature management
fdOnuVoiceGroup	1.3.6.1.4.1.34592.1.3.4.15.1.6			Description.
fdOnuCompliances	1.3.6.1.4.1.34592.1.3.4.15.2
fdOnuCompliance	1.3.6.1.4.1.34592.1.3.4.15.2.1			The compliance statement

RFC description

EPON ONU (Optical Network Unit) management MIB for configuring and monitoring Fiber-based optical access devices.

Start monitoring C-Data FD-series EPON ONU (incl. voice-gateway variants) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FD-ONU-MIB

What Is FD-ONU-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description