All MIBs › FD-OLT-MIB
Organization: epon eoc factory.
Last Updated: 2010-05-27
Category: Domain: DSL/xPON, Technology: EPON/PON, Vendor: C-Data
Description: C-Data (FD-series) Optical Line Terminal MIB for managing EPON/GPON OLT hardware, PON ports, and subscriber provisioning.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is FD-OLT-MIB?
FD-OLT-MIB is a C-Data (FD-series) proprietary MIB for managing Optical Line Terminal (OLT) equipment used in EPON/GPON passive optical network access deployments, covering PON port configuration and subscriber/ONU provisioning. Without concrete sample objects to draw from, the exact table/object set can't be detailed, but OLT MIBs of this kind typically expose PON port status, ONU registration/provisioning tables, and optical signal levels. Given its focus, it would plausibly support monitoring both hardware status (PON port optical transmit/receive levels, optical module temperature) and software/service status (ONU online/offline state, provisioning status), though these specifics can't be confirmed from the data provided here. It likely depends on standard IF-MIB/ENTITY-MIB conventions for interface and physical-component indexing, common in access equipment MIBs. Engineers often first explore it with an FD-OLT-MIB MIB Browser session, since it is typically deployed on C-Data FD-series OLT chassis in FTTH/PON access networks operated by ISPs.
IPNetwork Monitor allows you to monitor SNMP objects defined in FD-OLT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- C-Data FD1616S-B0 — 1U GPON OLT, 16 PON ports + 2x10GE uplinks, current product line
- C-Data FD1208S-R1 — 1U EPON OLT, 8 PON ports + dual 10GE uplinks, current product line
Monitoring Examples
No concrete sample objects were provided for this module, so specific object names for a monitoring scenario can't be honestly given; based on the module's stated purpose it would be expected to expose PON port and ONU/subscriber provisioning tables, but their exact naming can't be confirmed here.
This MIB depends on
Related MIBs
Imported Objects
From EPON-EOC-MIB
| DataDirection | |
| DeviceOperation | |
| DeviceStatus | |
| OperSwitch | |
| epon | OBJECT-IDENTITY |
From FD-SYSTEM-MIB
| ponCardSlotId | OBJECT-TYPE |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| U32 accessedOnuNumber | 1.3.6.1.4.1.34592.1.3.3.1.1.7 | Unsigned32 | read-only | The accessed physical ONU number, 'physical' is opposite to 'dummy', a 'Logical Link' is also called a dummy ONU to the OLT |
| accessUserIdentifer | 1.3.6.1.4.1.34592.1.3.3.11 | |||
| accessUserIdentiferConfigEntry | 1.3.6.1.4.1.34592.1.3.3.11.1.1 | not-accessible | Description. The PPPOE+ feature act on each OLT (PON port) | |
| accessUserIdentiferConfigTable | 1.3.6.1.4.1.34592.1.3.3.11.1 | not-accessible | Description. PPPOE+ feature management objects | |
| I32 aggreBandWidth | 1.3.6.1.4.1.34592.1.3.3.7.1.2 | Integer32 | read-write | Aggregate bandwidth |
| aggreBandWidthEntry | 1.3.6.1.4.1.34592.1.3.3.7.1 | not-accessible | Aggregate bandwidth configuration entry | |
| aggreBandWidthTable | 1.3.6.1.4.1.34592.1.3.3.7 | not-accessible | Aggregate bandwidth configuration table | |
| I32 aggreMaxBurstSize | 1.3.6.1.4.1.34592.1.3.3.7.1.3 | Integer32 | read-write | Aggregate max burst size |
| U32 associatedOnuId | 1.3.6.1.4.1.34592.1.3.3.12.1.1.3 | Unsigned32 | read-only | Associated ONU ID. the ONU ID that this Logical Link register from |
| blockedLinkEntry | 1.3.6.1.4.1.34592.1.3.3.12.5.1 | not-accessible | ||
| MAC blockedLinkMac | 1.3.6.1.4.1.34592.1.3.3.12.5.1.1 | MacAddress | read-only | |
| blockedLinkTable | 1.3.6.1.4.1.34592.1.3.3.12.5 | not-accessible | ||
| INT blockedMacOper | 1.3.6.1.4.1.34592.1.3.3.12.5.1.2 | INTEGER | read-write | |
| I32 bridgedVlanNumber | 1.3.6.1.4.1.34592.1.3.3.5.1.3 | Integer32 | read-only | briged vlan number |
| U32 crossConnectLinkId | 1.3.6.1.4.1.34592.1.3.3.12.1.1.9 | Unsigned32 | read-write | the link ID of the link which Cross Connect with this link if it is in Cross Connect Bridge Mode. |
| dba | 1.3.6.1.4.1.34592.1.3.3.6 | |||
| dbaDropDownWeightEntry | 1.3.6.1.4.1.34592.1.3.3.6.2.1 | not-accessible | DBA drop down weight configuration entry | |
| dbaDropDownWeightTable | 1.3.6.1.4.1.34592.1.3.3.6.2 | not-accessible | DBA drop down weight configuration table | |
| dbaPollRateEntry | 1.3.6.1.4.1.34592.1.3.3.6.3.1 | not-accessible | DBA polling rate entry | |
| dbaPollRateTable | 1.3.6.1.4.1.34592.1.3.3.6.3 | not-accessible | DBA polling rate table | |
| I32 dbaTokens | 1.3.6.1.4.1.34592.1.3.3.12.3.2.1.1 | Integer32 | read-write | |
| INT delaySensitive | 1.3.6.1.4.1.34592.1.3.3.12.3.1.1.3 | INTEGER | read-write | transmit delay sensitive or tolerant |
| OPE dhcpOption82 | 1.3.6.1.4.1.34592.1.3.3.11.1.1.2 | OperSwitch | read-write | Description. |
| DAT directionId | 1.3.6.1.4.1.34592.1.3.3.7.1.1 | DataDirection | not-accessible | Administrativly assigned identification for the purpose to distinguish different data direction |
| OPE discardUnknownMac | 1.3.6.1.4.1.34592.1.3.3.5.1.5 | OperSwitch | read-write | Discard unknown MAC, set to enable will cause the OLT to drop downstream frames with unknown (not learned) DAs |
| I32 discoverPeriod | 1.3.6.1.4.1.34592.1.3.3.4.3.1.1 | Integer32 | read-write | Discovery process parameters |
| I32 discoverTimeoutVal | 1.3.6.1.4.1.34592.1.3.3.4.3.1.3 | Integer32 | read-write | Discovery process parameters |
| I32 discoverWindow | 1.3.6.1.4.1.34592.1.3.3.4.3.1.2 | Integer32 | read-write | Discovery process parameters |
| discoveryParaEntry | 1.3.6.1.4.1.34592.1.3.3.4.3.1 | not-accessible | Each entry in this table contain configurations for each OLT | |
| discoveryParaTable | 1.3.6.1.4.1.34592.1.3.3.4.3 | not-accessible | Description. Reserved. ONU discovery process parameters. These parameters are associated with the transmit distance | |
| OPE downStreamResetAgeTimer | 1.3.6.1.4.1.34592.1.3.3.5.1.2 | OperSwitch | read-write | Generally, only when olt receive learned mac from upstream (from PON port) will reset the age timer. This object give us an option to let olt reset age timer when received learned mac from downstream (from OLT's SNI port). |
| dynamicMac | 1.3.6.1.4.1.34592.1.3.3.12.6.1 | |||
| MAC dynMacAddr | 1.3.6.1.4.1.34592.1.3.3.12.6.1.2.1.2 | MacAddress | read-only | |
| I32 dynMacAgeTime | 1.3.6.1.4.1.34592.1.3.3.5.1.1 | Integer32 | read-write | OLT Mac leared entry age limit, the value unit is '1s'. Set this value to 0 will disable mac age feature |
| dynMacEntry | 1.3.6.1.4.1.34592.1.3.3.12.6.1.2.1 | not-accessible | ||
| I32 dynMacIndex | 1.3.6.1.4.1.34592.1.3.3.12.6.1.2.1.1 | Integer32 | not-accessible | |
| INT dynMacOperation | 1.3.6.1.4.1.34592.1.3.3.12.6.1.1.1.1 | INTEGER | read-write | |
| dynMacOperEntry | 1.3.6.1.4.1.34592.1.3.3.12.6.1.1.1 | not-accessible | ||
| dynMacOperTable | 1.3.6.1.4.1.34592.1.3.3.12.6.1.1 | not-accessible | ||
| dynMacTable | 1.3.6.1.4.1.34592.1.3.3.12.6.1.2 | not-accessible | ||
| fdOlt | 1.3.6.1.4.1.34592.1.3.3 | OLT mib module | ||
| fdOltCompliance | 1.3.6.1.4.1.34592.1.3.3.20.2.1 | The compliance statement for fd epon device which implement FD-OLT-MIB | ||
| fdOltCompliances | 1.3.6.1.4.1.34592.1.3.3.20.2 | |||
| fdOltConformance | 1.3.6.1.4.1.34592.1.3.3.20 | |||
| fdOltGroups | 1.3.6.1.4.1.34592.1.3.3.20.1 | |||
| T/F forceReport | 1.3.6.1.4.1.34592.1.3.3.12.3.2.1.4 | TruthValue | read-write | |
| OPE forwardTagOnSimpleBridge | 1.3.6.1.4.1.34592.1.3.3.5.1.6 | OperSwitch | read-write | Set the object to 'allow' will permit the OLT to forward tagged frames on simple bridge links. Set to 'disallow' will not permit the OLT to forward tagged frames on simple bridges. |
| igmpGroupEntry | 1.3.6.1.4.1.34592.1.3.3.10.2.1 | not-accessible | ||
| I32 igmpGroupIndex | 1.3.6.1.4.1.34592.1.3.3.10.2.1.1 | Integer32 | not-accessible | Administratorly assigned entry index value |
| IP igmpGroupIpAddr | 1.3.6.1.4.1.34592.1.3.3.10.2.1.3 | IpAddress | read-only | |
| igmpGroupTable | 1.3.6.1.4.1.34592.1.3.3.10.2 | not-accessible | ||
| I32 igmpGroupVlan | 1.3.6.1.4.1.34592.1.3.3.10.2.1.2 | Integer32 | read-only | |
| igmpProxyConfigEntry | 1.3.6.1.4.1.34592.1.3.3.10.1.1 | not-accessible | ||
| igmpProxyConfigTable | 1.3.6.1.4.1.34592.1.3.3.10.1 | not-accessible | ||
| INT igmpProxyOper | 1.3.6.1.4.1.34592.1.3.3.10.1.1.19 | INTEGER | read-write | Restore all the configurable values to factory default |
| I32 igmpQueues | 1.3.6.1.4.1.34592.1.3.3.10.1.1.13 | Integer32 | read-write | |
| INT igmpSlaDelaySensitive | 1.3.6.1.4.1.34592.1.3.3.10.1.1.16 | INTEGER | read-write | |
| I32 igmpSlaMaxAllowedBW | 1.3.6.1.4.1.34592.1.3.3.10.1.1.15 | Integer32 | read-write | |
| I32 igmpSlaMaxBurstSize | 1.3.6.1.4.1.34592.1.3.3.10.1.1.17 | Integer32 | read-write | |
| I32 igmpSlaMinGuaranteedBW | 1.3.6.1.4.1.34592.1.3.3.10.1.1.14 | Integer32 | read-write | |
| I32 keyChangeTimer | 1.3.6.1.4.1.34592.1.3.3.12.1.1.6 | Integer32 | read-write | encryption used key change timer, set to non-zero value will enable down stream encryption, set to zero will disable this feature. the value unit is 'second'. |
| I32 l0DropDownWeight | 1.3.6.1.4.1.34592.1.3.3.6.2.1.1 | Integer32 | read-write | level 0 drop down weight |
| I32 l0PollingRate | 1.3.6.1.4.1.34592.1.3.3.6.3.1.1 | Integer32 | read-write | level 0 links polling rate |
| I32 l1DropDownWeight | 1.3.6.1.4.1.34592.1.3.3.6.2.1.2 | Integer32 | read-write | level 1 drop down weight |
| I32 l1PollingRate | 1.3.6.1.4.1.34592.1.3.3.6.3.1.2 | Integer32 | read-write | level 1 links polling rate |
| I32 l2DropDownWeight | 1.3.6.1.4.1.34592.1.3.3.6.2.1.3 | Integer32 | read-write | level 2 drop down weight |
| I32 l2PollingRate | 1.3.6.1.4.1.34592.1.3.3.6.3.1.3 | Integer32 | read-write | level 2 links polling rate |
| I32 lastMemberQueryCount | 1.3.6.1.4.1.34592.1.3.3.10.1.1.8 | Integer32 | read-write | last Member Query Count,range 0--16 |
| I32 lastMemberQueryInterval | 1.3.6.1.4.1.34592.1.3.3.10.1.1.9 | Integer32 | read-write | last Member Query Interval |
| I32 lastMemberQueryResTime | 1.3.6.1.4.1.34592.1.3.3.10.1.1.10 | Integer32 | read-write | last Membe rQuery Response Time |
| I32 level0Links | 1.3.6.1.4.1.34592.1.3.3.6.1.1.1 | Integer32 | read-write | Priority level 0 link numbers that the olt will allow to register. Priority level 0 is 'min bw=max bw and the delay is sensitive' this object can only be changed when the olt is diable |
| I32 level1Links | 1.3.6.1.4.1.34592.1.3.3.6.1.1.2 | Integer32 | read-write | Priority level 1 link numbers that the olt will allow to register. Priority level 1 is 'min bw!=0' this object can only be changed when the olt is diable |
| I32 level2Links | 1.3.6.1.4.1.34592.1.3.3.6.1.1.3 | Integer32 | read-write | Priority level 2 link numbers that the olt will allow to register. Priority level 2 is 'min bw=0' this object can only be changed when the olt is diable |
| U32 linkId | 1.3.6.1.4.1.34592.1.3.3.12.1.1.1 | Unsigned32 | not-accessible | this object is defined to identify 'Logical Links' registered on OLT, it is a numbered value begin from 1 to max permit Link numbers. it is used within a OLT range. this object is different from the followwed 'llidAssigned' object,the latter is the LLID value allocated by OLT itself. the 'linkId' is allocated by PON card software. |
| T/F linkIdExhaust | 1.3.6.1.4.1.34592.1.3.3.1.1.8 | TruthValue | read-only | Indicate if there is available linkId which can be allocated to new registered Logical Link |
| T/F linkIdOverWrite | 1.3.6.1.4.1.34592.1.3.3.1.1.10 | TruthValue | read-write | Description. This object is used to config linkId overwrite operation. LinkId is system resource managed by PON card firmware and used to identify each Logical Link. When a new Link register, a LinkId will be assigned. When the registered Link off-line or de-register,the assigned LinkId will still be reserved. Such a policy will lead a result that is the allowed linkId resource exhaust. When this occurred, the device manager can have two choices, delete the off-line linkId entry manually or permit the device firmware itself to overwrite the oldest assigned linkId by seting the value of this object to 'yes'. Generally, the choice will be made based on if the user care the off-line Links' configurations and status. If don't care, set this value to 'yes' will be a better choice. |
| OCT linkIDsInVlan | 1.3.6.1.4.1.34592.1.3.3.12.4.2.1.2 | OCTET STRING | read-only | This object is a linkId container, which contain all the linkIds value which belong to this vlan. Data formats: ------------------------------------------------ link number|linkId0|linkId1|.....|linkIdn|...... ------------------------------------------------ 2B 1B 1B 1B |
| linkLevelSizeEntry | 1.3.6.1.4.1.34592.1.3.3.6.1.1 | not-accessible | Each entry indicate an onu | |
| linkLevelSizeTable | 1.3.6.1.4.1.34592.1.3.3.6.1 | not-accessible | This table contains the configurations that the logical links which can register on each priority level | |
| linkOamRateEntry | 1.3.6.1.4.1.34592.1.3.3.12.2.1.1 | not-accessible | Description. | |
| linkOamRateTable | 1.3.6.1.4.1.34592.1.3.3.12.2.1 | not-accessible | Description. Reserved, generally, the Link OAM rate is used for debugging | |
| DEV linkOnLineStatus | 1.3.6.1.4.1.34592.1.3.3.12.1.1.5 | DeviceStatus | read-only | Description. |
| llid | 1.3.6.1.4.1.34592.1.3.3.12 | |||
| llidAdvancedManage | 1.3.6.1.4.1.34592.1.3.3.12.2 | |||
| U32 llidAssigned | 1.3.6.1.4.1.34592.1.3.3.12.1.1.2 | Unsigned32 | read-only | LLID value allocated by OLT |
| INT llidBridgeType | 1.3.6.1.4.1.34592.1.3.3.12.1.1.7 | INTEGER | read-write | |
| llidConfigEntry | 1.3.6.1.4.1.34592.1.3.3.12.1.1 | not-accessible | ||
| llidConfigTable | 1.3.6.1.4.1.34592.1.3.3.12.1 | not-accessible | ||
| MAC llidMac | 1.3.6.1.4.1.34592.1.3.3.12.1.1.4 | MacAddress | read-only | Logical Link's MAC Address |
| I32 llidMacEntryLimit | 1.3.6.1.4.1.34592.1.3.3.12.1.1.8 | Integer32 | read-write | |
| INT llidOperation | 1.3.6.1.4.1.34592.1.3.3.12.1.1.10 | INTEGER | read-write | |
| llidSlaEntry | 1.3.6.1.4.1.34592.1.3.3.12.3.1.1 | not-accessible | ||
| llidSlaTable | 1.3.6.1.4.1.34592.1.3.3.12.3.1 | not-accessible | ||
| llidVlan | 1.3.6.1.4.1.34592.1.3.3.12.4 | |||
| llidVlanCfgEntry | 1.3.6.1.4.1.34592.1.3.3.12.4.1.1 | not-accessible | ||
| llidVlanCfgTable | 1.3.6.1.4.1.34592.1.3.3.12.4.1 | not-accessible | ||
| ROW llidVlanRowStatus | 1.3.6.1.4.1.34592.1.3.3.12.4.1.1.2 | RowStatus | read-create | Create or delete a vlan tag for a given LinkId |
| I32 llidVlanTag | 1.3.6.1.4.1.34592.1.3.3.12.4.1.1.1 | Integer32 | not-accessible | Vlan and translated vlan tags. Data formats: ------------------------------ vlan tag | translated vlan id | ------------------------------ 2B 2B translated vlan tag must be set to 0 if the link is not in vlan translate mode |
| macAddr | 1.3.6.1.4.1.34592.1.3.3.12.6 | |||
| OPE macOverWrite | 1.3.6.1.4.1.34592.1.3.3.5.1.4 | OperSwitch | read-write | when enable, the new coming MAC will overwrite the oldest learned MAC when the per-link learning buf is full; when disable, the frame with new mac will be dropped when the learning buf is full. |
| I32 maxAllowedBW | 1.3.6.1.4.1.34592.1.3.3.12.3.1.1.2 | Integer32 | read-write | Max allowed bandwidth |
| I32 maxBurstSize | 1.3.6.1.4.1.34592.1.3.3.12.3.1.1.4 | Integer32 | read-write | Maximum burst size |
| I32 maxIgmpGroups | 1.3.6.1.4.1.34592.1.3.3.10.1.1.1 | Integer32 | read-write | |
| I32 maxLinkOamRate | 1.3.6.1.4.1.34592.1.3.3.12.2.1.1.1 | Integer32 | read-write | Description. |
| I32 maxOamRate | 1.3.6.1.4.1.34592.1.3.3.4.2.1.2 | Integer32 | read-write | Description. Reserved, EMS may not be support |
| U32 maxPermitLLIDNumber | 1.3.6.1.4.1.34592.1.3.3.1.1.5 | Unsigned32 | read-write | LLID number that the olt allow to register, this value can only be changed when the olt is disabled. |
| I32 maxPriValue | 1.3.6.1.4.1.34592.1.3.3.12.4.3.1.5 | Integer32 | read-create | Description. |
| I32 minGuaranteedBW | 1.3.6.1.4.1.34592.1.3.3.12.3.1.1.1 | Integer32 | read-write | Minimum guaranted bandwidth |
| I32 minLinkOamRate | 1.3.6.1.4.1.34592.1.3.3.12.2.1.1.2 | Integer32 | read-write | Description. |
| I32 minOamRate | 1.3.6.1.4.1.34592.1.3.3.4.2.1.1 | Integer32 | read-write | Description. Reserved, EMS may not be support |
| I32 minPriValue | 1.3.6.1.4.1.34592.1.3.3.12.4.3.1.4 | Integer32 | read-create | Description. |
| multicastSlaEntry | 1.3.6.1.4.1.34592.1.3.3.12.3.3.1 | not-accessible | ||
| multicastSlaTable | 1.3.6.1.4.1.34592.1.3.3.12.3.3 | not-accessible | ||
| INT multiDelaySensitive | 1.3.6.1.4.1.34592.1.3.3.12.3.3.1.3 | INTEGER | read-write | |
| I32 multiMaxAllowedBW | 1.3.6.1.4.1.34592.1.3.3.12.3.3.1.2 | Integer32 | read-write | |
| I32 multiMaxBurstSize | 1.3.6.1.4.1.34592.1.3.3.12.3.3.1.4 | Integer32 | read-write | |
| I32 multiMinGuanBW | 1.3.6.1.4.1.34592.1.3.3.12.3.3.1.1 | Integer32 | read-write | |
| INT netVlanId | 1.3.6.1.4.1.34592.1.3.3.12.4.3.1.1 | INTEGER | read-create | Description. |
| I32 nonDbaLinks | 1.3.6.1.4.1.34592.1.3.3.6.1.1.4 | Integer32 | read-write | TDM level link numbers that the olt will allow to register. this object can only be changed when the olt is diable |
| I32 oamRspTimeout | 1.3.6.1.4.1.34592.1.3.3.4.2.1.3 | Integer32 | read-write | Description. Reserved, EMS may not be support |
| OCT oltAclRuleData | 1.3.6.1.4.1.34592.1.3.3.8.1.2 | OCTET STRING | read-write | Description: This variable is used to contain the OLT ACL data. Data format: GET: 2 2 1 1 1 1 ------------------------------------------------------------------ |data length|rule numbers|direction|priority|action|clause numbers| ------------------------------------------------------------------- || ------------------------------>| SET/DELETE: 2 1 1 1 1 --------------------------------------------------------- |data length|command type|priority|reserved|clause numbers| --------------------------------------------------------- 1 6 1 -------------------------------- | field | value | operator | -------------------------------- || para comment: command type: 1->set, 2->delete |
| oltAclRuleEntry | 1.3.6.1.4.1.34592.1.3.3.8.1 | not-accessible | OLT configuration rule entry | |
| oltAclRuleTable | 1.3.6.1.4.1.34592.1.3.3.8 | not-accessible | OLT acl rule configuration table | |
| OCT oltAddiVlanEthType | 1.3.6.1.4.1.34592.1.3.3.4.4.1.1 | OCTET STRING | read-write | Additional Ethernet type to identify vlan frames. 0 1 2 3 --------------------------------------------- vlan EthType| tag upstream | tag downstream | --------------------------------------------- 2byte 1byte 1byte vlan EthType: default 0x8100 tag upstream: 1->use this type to tag upstream, 0->untag tag downstream: 1->use this type to tag downstream, 0->untag |
| oltAdvancedConfigEntry | 1.3.6.1.4.1.34592.1.3.3.4.4.1 | not-accessible | Each entry in this table contain the information for one OLT | |
| oltAdvancedConfigTable | 1.3.6.1.4.1.34592.1.3.3.4.4 | not-accessible | This table contain the information which is not normally used but may be usefull in some special circumstance | |
| oltAdvancedManage | 1.3.6.1.4.1.34592.1.3.3.4 | |||
| oltAdvanceManageGroup | 1.3.6.1.4.1.34592.1.3.3.20.1.2 | A collection of objects providing advanced OLT management feature | ||
| oltBaseManageEntry | 1.3.6.1.4.1.34592.1.3.3.1.1 | not-accessible | Each entry in this table contain the info for one OLT ( that is also called one PON port) | |
| oltBaseManageGroup | 1.3.6.1.4.1.34592.1.3.3.20.1.1 | A collection of objects providing the basic OLT management. | ||
| oltBaseManageTable | 1.3.6.1.4.1.34592.1.3.3.1 | not-accessible | OLT base management information table | |
| oltBridgeConfigEntry | 1.3.6.1.4.1.34592.1.3.3.5.1 | not-accessible | ||
| oltBridgeConfigTable | 1.3.6.1.4.1.34592.1.3.3.5 | not-accessible | ||
| I32 oltBroadCastRate | 1.3.6.1.4.1.34592.1.3.3.4.4.1.6 | Integer32 | read-write | Description. |
| OPE oltBroadCastRateCtl | 1.3.6.1.4.1.34592.1.3.3.4.4.1.3 | OperSwitch | read-write | Description. |
| U32 oltChipApp0Ver | 1.3.6.1.4.1.34592.1.3.3.4.1.1.6 | Unsigned32 | read-only | olt chip application file version |
| U32 oltChipApp1Ver | 1.3.6.1.4.1.34592.1.3.3.4.1.1.7 | Unsigned32 | read-only | olt chip application file version |
| U32 oltChipBootVer | 1.3.6.1.4.1.34592.1.3.3.4.1.1.4 | Unsigned32 | read-only | olt chip boot firmware version |
| U32 oltChipDiagVer | 1.3.6.1.4.1.34592.1.3.3.4.1.1.8 | Unsigned32 | read-only | olt chip diagnostic file version |
| U32 oltChipFirmVer | 1.3.6.1.4.1.34592.1.3.3.4.1.1.3 | Unsigned32 | read-only | Description.olt chip frimware version |
| oltChipInfoEntry | 1.3.6.1.4.1.34592.1.3.3.4.1.1 | not-accessible | Each entry in this table contain an olt info | |
| oltChipInfoTable | 1.3.6.1.4.1.34592.1.3.3.4.1 | not-accessible | Description. reserved, may or may not support | |
| U32 oltChipPersVer | 1.3.6.1.4.1.34592.1.3.3.4.1.1.5 | Unsigned32 | read-only | olt chip's personality file version |
| U32 oltChipProCode | 1.3.6.1.4.1.34592.1.3.3.4.1.1.1 | Unsigned32 | read-only | Description. olt chip product code |
| U32 oltChipVer | 1.3.6.1.4.1.34592.1.3.3.4.1.1.2 | Unsigned32 | read-only | Description.olt chip version |
| OPE oltEnable | 1.3.6.1.4.1.34592.1.3.3.1.1.4 | OperSwitch | read-write | This object is used to enable or disable the OLT. When enabled, the olt will pass user traffic; When disabled,the olt will turning off the EPON port and blocking all traffic in both directions |
| I32 oltId | 1.3.6.1.4.1.34592.1.3.3.1.1.1 | Integer32 | not-accessible | Administratorly assigned identifier value |
| oltIgmpProxy | 1.3.6.1.4.1.34592.1.3.3.10 | |||
| oltIgmpProxyGroup | 1.3.6.1.4.1.34592.1.3.3.20.1.3 | A collection of objects providing OLT IGMP proxy feature management | ||
| oltLlidAdvanceManageGroup | 1.3.6.1.4.1.34592.1.3.3.20.1.6 | A collection of objects providing advanced LLID (Logical Link) features management | ||
| oltLlidBaseManageGroup | 1.3.6.1.4.1.34592.1.3.3.20.1.5 | A collection of objects providing basic LLID (Logical Link) features management | ||
| MAC oltMacAddr | 1.3.6.1.4.1.34592.1.3.3.1.1.2 | MacAddress | read-only | OLT MAC address |
| OPE oltMultiCastRateCtl | 1.3.6.1.4.1.34592.1.3.3.4.4.1.4 | OperSwitch | read-write | Description. |
| oltOamRateEntry | 1.3.6.1.4.1.34592.1.3.3.4.2.1 | not-accessible | Each entry in this table contain configurations for each OLT | |
| oltOamRateTable | 1.3.6.1.4.1.34592.1.3.3.4.2 | not-accessible | olt oam rate configurations | |
| DEV oltOperate | 1.3.6.1.4.1.34592.1.3.3.1.1.20 | DeviceOperation | read-write | This object define a collection of operate actions which can be apply on olt device |
| INT oltPortId | 1.3.6.1.4.1.34592.1.3.3.8.1.1 | INTEGER | not-accessible | Administrativly assigned port ID, used as entry index |
| oltPPPoEPlusGroup | 1.3.6.1.4.1.34592.1.3.3.20.1.4 | A collection of objects providing pppoe+ feature management | ||
| OPE oltUnkUcCastRateCtl | 1.3.6.1.4.1.34592.1.3.3.4.4.1.5 | OperSwitch | read-write | Description. |
| INT oltUpgradeStat | 1.3.6.1.4.1.34592.1.3.3.1.1.21 | INTEGER | read-only | Description. |
| DEV oltWorkState | 1.3.6.1.4.1.34592.1.3.3.1.1.3 | DeviceStatus | read-only | work status of the OLT |
| T/F onuIdExhaust | 1.3.6.1.4.1.34592.1.3.3.1.1.9 | TruthValue | read-only | Refer to linkIdExhaust desc |
| T/F onuIdOverWrite | 1.3.6.1.4.1.34592.1.3.3.1.1.11 | TruthValue | read-write | Refer to 'linkIdOverWrite' description |
| INT onuMgmtDefType | 1.3.6.1.4.1.34592.1.3.3.1.1.22 | INTEGER | read-write | Description. |
| INT onuP2pEnDis | 1.3.6.1.4.1.34592.1.3.3.13.1.1 | INTEGER | read-write | 0:disable 1:enable |
| onuP2pEntry | 1.3.6.1.4.1.34592.1.3.3.13.1 | not-accessible | Description. | |
| onuP2pManageGroup | 1.3.6.1.4.1.34592.1.3.3.20.1.7 | Description. | ||
| INT onuP2pPonEnDis | 1.3.6.1.4.1.34592.1.3.3.13.1.2 | INTEGER | read-write | Description. |
| onuP2pTable | 1.3.6.1.4.1.34592.1.3.3.13 | not-accessible | Description. | |
| OPE onuUltraLongDistanceTrans | 1.3.6.1.4.1.34592.1.3.3.4.4.1.2 | OperSwitch | read-write | Description.Reserved. This object is used for enable the ultra-long distance transmission of PON. Normally, this object should not be changed, the disable allowwed transmit distance is 20KM for PON standard. But,if some user want it transmit more longer than standard for some special case, he can set this value to true. When change this configuration, several parameters should be changed internally. Detail operations will not be descripted here. |
| OPE pppoePlusEnable | 1.3.6.1.4.1.34592.1.3.3.11.1.1.1 | OperSwitch | read-write | Description. Enable/Disable pppoe+ feature, when enabled PON card firmware will sniff each pppoe require frames sent from user divice and then add cared info (normal info will be onu ID,onu port, vlan ID) to the protocol specified frame field. This feature is usefull when exact user identify is needed. Disable OLT is essential before set this feature. |
| OCT priCopyMapData | 1.3.6.1.4.1.34592.1.3.3.9.1.1 | OCTET STRING | read-write | 1 1 1 .. 1 .. ----------------------------------------------------------------------------------------- |A/B Precedence|Default COS| N | COS | M | COS | ----------------------------------------------------------------------------------------- || || |
| priCopyMapEntry | 1.3.6.1.4.1.34592.1.3.3.9.1 | not-accessible | Priority copy value map configuration entry | |
| priCopyMapTable | 1.3.6.1.4.1.34592.1.3.3.9 | not-accessible | Priority copy value map configuration table | |
| INT priSelector | 1.3.6.1.4.1.34592.1.3.3.12.4.3.1.3 | INTEGER | read-create | Description. |
| priVlanEntry | 1.3.6.1.4.1.34592.1.3.3.12.4.3.1 | not-accessible | Description. | |
| ROW priVlanRowStatus | 1.3.6.1.4.1.34592.1.3.3.12.4.3.1.7 | RowStatus | read-create | Description. |
| priVlanTable | 1.3.6.1.4.1.34592.1.3.3.12.4.3 | not-accessible | Description. Reserved | |
| I32 queryInterval | 1.3.6.1.4.1.34592.1.3.3.10.1.1.3 | Integer32 | read-write | |
| I32 queryMaxResTime | 1.3.6.1.4.1.34592.1.3.3.10.1.1.5 | Integer32 | read-write | |
| I32 queryRspTimeout | 1.3.6.1.4.1.34592.1.3.3.10.1.1.4 | Integer32 | read-write | |
| U32 registeredLLIDNumber | 1.3.6.1.4.1.34592.1.3.3.1.1.6 | Unsigned32 | read-only | LLID number that registered now on this OLT |
| I32 robustCount | 1.3.6.1.4.1.34592.1.3.3.10.1.1.2 | Integer32 | read-write | |
| I32 schedulerMaxTokens | 1.3.6.1.4.1.34592.1.3.3.12.3.2.1.3 | Integer32 | read-write | |
| I32 schedulerMinTokens | 1.3.6.1.4.1.34592.1.3.3.12.3.2.1.2 | Integer32 | read-write | |
| sla | 1.3.6.1.4.1.34592.1.3.3.12.3 | |||
| OPE slaEnable | 1.3.6.1.4.1.34592.1.3.3.12.3.1.1.5 | OperSwitch | read-write | Sla enable disable |
| slaWeightEntry | 1.3.6.1.4.1.34592.1.3.3.12.3.2.1 | not-accessible | ||
| slaWeightTable | 1.3.6.1.4.1.34592.1.3.3.12.3.2 | not-accessible | ||
| I32 startQueryCount | 1.3.6.1.4.1.34592.1.3.3.10.1.1.6 | Integer32 | read-write | |
| I32 startupQueryInterval | 1.3.6.1.4.1.34592.1.3.3.10.1.1.7 | Integer32 | read-write | startup query intrval |
| staticMac | 1.3.6.1.4.1.34592.1.3.3.12.6.2 | |||
| MAC staticMacAddr | 1.3.6.1.4.1.34592.1.3.3.12.6.2.1.1.2 | MacAddress | read-write | |
| staticMacEntry | 1.3.6.1.4.1.34592.1.3.3.12.6.2.1.1 | not-accessible | ||
| I32 staticMacIndex | 1.3.6.1.4.1.34592.1.3.3.12.6.2.1.1.1 | Integer32 | not-accessible | Description. |
| ROW staticMacRowStatus | 1.3.6.1.4.1.34592.1.3.3.12.6.2.1.1.3 | RowStatus | read-create | |
| staticMacTable | 1.3.6.1.4.1.34592.1.3.3.12.6.2.1 | not-accessible | ||
| T/F transNonTosFrame | 1.3.6.1.4.1.34592.1.3.3.12.4.3.1.6 | TruthValue | read-create | Description. |
| I32 upstreamCos | 1.3.6.1.4.1.34592.1.3.3.12.4.3.1.2 | Integer32 | read-create | Description. |
| I32 upstreamRetransCount | 1.3.6.1.4.1.34592.1.3.3.10.1.1.11 | Integer32 | read-write | upstream Retransmit Count |
| I32 upstreamRetransInterval | 1.3.6.1.4.1.34592.1.3.3.10.1.1.12 | Integer32 | read-write | Upstream Retransmit Interval,range 1--65535 |
| U32 vlanId | 1.3.6.1.4.1.34592.1.3.3.12.4.2.1.1 | Unsigned32 | not-accessible | |
| vlanLlidEntry | 1.3.6.1.4.1.34592.1.3.3.12.4.2.1 | not-accessible | ||
| vlanLlidTable | 1.3.6.1.4.1.34592.1.3.3.12.4.2 | not-accessible |
RFC description
Management module for Optical Line Terminal (OLT) devices defining managed objects for OLT/ONU operations including broadcast/multicast rate control, DDM parameters, and IGMP proxy settings.
Start monitoring C-Data FD-series GPON/EPON OLT (Optical Line Terminal) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.