All MIBs › E5-111-MIB
Category: DSL and Broadband, Domain: DSL/xPON, Vendor: Calix
Description:
Core management MIB for the Calix E5-111 multi-service access platform covering system configuration and operational status.
Imported Objects
From BRIDGE-MIB
| BridgeId | |
| Timeout | |
| dot1dBasePort | OBJECT-TYPE |
From P-BRIDGE-MIB
| dot1dTrafficClass | OBJECT-TYPE |
From Q-BRIDGE-MIB
| PortList | |
| VlanIndex | |
| dot1qVlanIndex | OBJECT-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString | |
| PhysAddress | |
| ifIndex |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| IpAddress | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION |
What Is E5-111-MIB?
E5-111-MIB is Calix's vendor-specific management MIB for the E5-111, a member of the E5 multi-service access platform family used for delivering combined voice, data, and video services over copper and fiber access lines. It is expected to cover core system configuration and operational status for the unit, such as chassis/card inventory, interface configuration, and service provisioning parameters typical of Calix access platform MIBs. Its primary monitoring value would be device hardware and operational status -- system uptime, card/module presence, port and line status, and alarm/fault conditions -- letting a carrier confirm the access node and its subscriber-facing ports are healthy. It likely depends on shared Calix platform conventions (product and common MIB structures) used across the E-series line. It is deployed by broadband/telecom carriers at the access edge, typically polled by an EMS/NMS to monitor subscriber line and chassis health on deployed E5-111 units. Engineers frequently search for an E5-111-MIB MIB Browser to load and explore this module's OID tree before configuring SNMP polling on deployed E5-111 units.
IPNetwork Monitor allows you to monitor SNMP objects defined in E5-111-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- system uptime
- chassis/card inventory status
- subscriber port/line status
- alarm/fault conditions
- service configuration status
Supported Devices
- Calix E5-111 multi-service access platform
Monitoring Examples
No sample objects were provided for this module and its module description is empty, so specific object/table names cannot be grounded to concrete evidence; a realistic scenario would involve polling chassis and port status tables (following Calix's common E-series naming conventions) to detect a failed line card or a subscriber port that has gone out of service, but this cannot be stated as fact without seeing the actual object names.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| calixNetworks | 1.3.6.1.4.1.6321 | |||
| calixRegistrations | 1.3.6.1.4.1.6321.1 | |||
| calixProducts | 1.3.6.1.4.1.6321.1.2 | |||
| e5x100 | 1.3.6.1.4.1.6321.1.2.3 | |||
| e5x111 | 1.3.6.1.4.1.6321.1.2.3.2 | |||
| alarmconf | 1.3.6.1.4.1.6321.1.2.3.2.2 | |||
| INT alarmOps | 1.3.6.1.4.1.6321.1.2.3.2.2.1 | INTEGER | read-write | The manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. The various bit positions are: BIT 1: clear BIT 2: cutoff |
| alarmConfTable | 1.3.6.1.4.1.6321.1.2.3.2.2.2 | not-accessible | This table includes alarm configuration. | |
| alarmConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1 | not-accessible | An entry in alarmConfTable. | |
| INT alarmConfId | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.1 | INTEGER | read-only | 5000:adslLine_up 5001:adslLine_down 5002:adslPerf_lol_thresh 5003:adslPerf_lof_thresh 5004:adslPerf_los_thresh 5005:adslPerf_lop_thresh 5006:adslPerf_es_thresh 5007:adslPerf_ses_thresh 5008:adslPerf_uas_thresh 5009:adslAtuc_loftrap 5010:adslAtuc_lostrap 5011:adslAtur_loftrap 5012:adslAtur_lostrap 5013:adslAtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:voip_battery_fail 10009:voip_clock_fail 10010:voip_ringer_fault 10011:eqptI2c_err 10012:eqptAlm_input2 10013:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 20000:enetUp 20001:enetDown 25000:voip_temp_error 25001:voip_dc_power_fail 25002:voip_ac_power_fail 25003:voip_ring_timer_fail 25004:voip_ring_rsrce_fail 25006:voip_call_setup_failed 25007:voip_call_threshold_violate |
| INT alarmConfFacility | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.2 | INTEGER | read-write | Alarm facility. |
| INT alarmConfTarget | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.3 | INTEGER | read-write | The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog |
| INT alarmConfSeverity | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.4 | INTEGER | read-write | Alarm severity |
| INT alarmConfClearable | 1.3.6.1.4.1.6321.1.2.3.2.2.2.1.5 | INTEGER | read-write | Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear. |
| alarmCurrTable | 1.3.6.1.4.1.6321.1.2.3.2.2.3 | not-accessible | This table includes current alarm information. | |
| alarmCurrEntry | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1 | not-accessible | An entry in alarmCurrTable. | |
| INT alarmCurrIndex | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.1 | INTEGER | read-only | Index of the alarm. |
| TIK alarmCurrOccurTime | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.2 | TimeTicks | read-only | Alarm occurence time (in hundredths of a second) since the system was last re-initialized. |
| OID alarmCurrTrapOid | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.3 | OBJECT IDENTIFIER | read-only | Trap OID of the alarm. |
| INT alarmCurrParam1 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.4 | INTEGER | read-only | The 1st parameter of the alarm. |
| INT alarmCurrParam2 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.5 | INTEGER | read-only | The 2nd parameter of the alarm. |
| INT alarmCurrParam3 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.6 | INTEGER | read-only | The 3rd parameter of the alarm. |
| INT alarmCurrParam4 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.7 | INTEGER | read-only | The 4th parameter of the alarm. |
| INT alarmCurrParam5 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.8 | INTEGER | read-only | The 5th parameter of the alarm. |
| INT alarmCurrParam6 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.9 | INTEGER | read-only | The 6th parameter of the alarm. |
| INT alarmCurrParam7 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.10 | INTEGER | read-only | The 7th parameter of the alarm. |
| INT alarmCurrParam8 | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.11 | INTEGER | read-only | The 8th parameter of the alarm. |
| STR alarmCurrTimeDescr | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.12 | DisplayString | read-only | The string representation of occurence time (YYYY/MM/DD HH:MM:SS). |
| INT alarmCurrSeverity | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.13 | INTEGER | read-only | The severity of the alarm. |
| STR alarmCurrDescr | 1.3.6.1.4.1.6321.1.2.3.2.2.3.1.14 | DisplayString | read-only | The description of the alarm. |
| alarmSeverityPortTable | 1.3.6.1.4.1.6321.1.2.3.2.2.4 | not-accessible | This table includes the configuration of alarm reporting severity threshold for each port. | |
| alarmSeverityPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.2.4.1 | not-accessible | An entry in alarmSeverityPortTable. | |
| INT severityThresh | 1.3.6.1.4.1.6321.1.2.3.2.2.4.1.1 | INTEGER | read-write | The minimum alarm severity that is reported. |
| diagnostic | 1.3.6.1.4.1.6321.1.2.3.2.4 | |||
| selt | 1.3.6.1.4.1.6321.1.2.3.2.4.3 | |||
| INT seltTarget | 1.3.6.1.4.1.6321.1.2.3.2.4.3.1 | INTEGER | read-write | IfIndex of the port which would be performed single end loopback test. |
| INT seltOps | 1.3.6.1.4.1.6321.1.2.3.2.4.3.2 | INTEGER | read-write | The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed. |
| STR seltStatus | 1.3.6.1.4.1.6321.1.2.3.2.4.3.3 | DisplayString | read-only | Status description of the selt result. |
| INT seltCableType | 1.3.6.1.4.1.6321.1.2.3.2.4.3.4 | INTEGER | read-only | The cable type that selt result indicates. |
| INT seltLoopEstimateLengthFt | 1.3.6.1.4.1.6321.1.2.3.2.4.3.5 | INTEGER | read-only | The estimated loop length that selt result indicates. |
| INT seltLoopEstimateLengthMeter | 1.3.6.1.4.1.6321.1.2.3.2.4.3.6 | INTEGER | read-only | The estimated loop length that selt result indicates. |
| mlt | 1.3.6.1.4.1.6321.1.2.3.2.4.4 | |||
| INT mltTarget | 1.3.6.1.4.1.6321.1.2.3.2.4.4.1 | INTEGER | read-write | IfIndex of the port which would be performed Metallic Link Test. |
| INT mltOps | 1.3.6.1.4.1.6321.1.2.3.2.4.4.2 | INTEGER | read-write | The manager sets the object to 1 to start the mlt and the agent clears the object to zero when mlt is successfully completed. |
| INT mltOption | 1.3.6.1.4.1.6321.1.2.3.2.4.4.3 | INTEGER | read-write | all : test all items vac: test AC voltage vdc: test DC voltage rload: test load resistance riso: test isolation resistance cap: test capacitor ren: test REN value ring: test ring voltage metering: test metering voltage |
| INT mltForce | 1.3.6.1.4.1.6321.1.2.3.2.4.4.4 | INTEGER | read-write | Force test even the port is in use. |
| mltResult | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5 | |||
| INT mltVacTip | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.1 | INTEGER | read-only | |
| INT mltVacRing | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.2 | INTEGER | read-only | |
| INT mltVacDiff | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.3 | INTEGER | read-only | |
| INT mltVdcTip | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.4 | INTEGER | read-only | |
| INT mltVdcRing | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.5 | INTEGER | read-only | |
| INT mltVdcDiff | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.6 | INTEGER | read-only | |
| INT mltRLoop | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.7 | INTEGER | read-only | |
| INT mltRtg | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.8 | INTEGER | read-only | |
| INT mltRrg | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.9 | INTEGER | read-only | |
| INT mltRtr | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.10 | INTEGER | read-only | |
| INT mltCtg | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.11 | INTEGER | read-only | |
| INT mltCrg | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.12 | INTEGER | read-only | |
| INT mltCtr | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.13 | INTEGER | read-only | |
| INT mltRen | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.14 | INTEGER | read-only | |
| INT mltVRing | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.15 | INTEGER | read-only | |
| INT mltVMetering | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.16 | INTEGER | read-only | |
| INT mltDialToneDetected | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.17 | INTEGER | read-only | |
| INT mltDetectedDtmfCount | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.18 | INTEGER | read-only | |
| INT mltDialToneDelay | 1.3.6.1.4.1.6321.1.2.3.2.4.4.5.19 | INTEGER | read-only | |
| mltRelayTable | 1.3.6.1.4.1.6321.1.2.3.2.4.4.6 | not-accessible | Perform specified MLT relay function, or turn off MLT relay function in specified subscriber. | |
| mltRelayEntry | 1.3.6.1.4.1.6321.1.2.3.2.4.4.6.1 | not-accessible | An entry of mltRelayTable. | |
| INT mltRelaySet | 1.3.6.1.4.1.6321.1.2.3.2.4.4.6.1.1 | INTEGER | read-write | By default, relay function is turned off. |
| multicast | 1.3.6.1.4.1.6321.1.2.3.2.7 | |||
| INT igmpEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.1 | INTEGER | read-write | Enable/disable IGMP protocol. |
| mcastBandwidth | 1.3.6.1.4.1.6321.1.2.3.2.7.4 | |||
| INT mcastDefaultBandwidth | 1.3.6.1.4.1.6321.1.2.3.2.7.4.1 | INTEGER | read-write | Default bandwidth requirement for a multicast channel. |
| INT maxNumOfMcastBw | 1.3.6.1.4.1.6321.1.2.3.2.7.4.2 | INTEGER | read-only | The maximum number of row entries that user can create in mcastBwTable. |
| mcastBwTable | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3 | not-accessible | This table defines bandwidth budget for a range of multicast IP channels. | |
| mcastBwEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1 | not-accessible | An entry of mcastBwTable. | |
| INT mcastBwIndex | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.1 | INTEGER | read-only | The index which specify the entry. |
| IP mcastBwStartIp | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.2 | IpAddress | read-only | The start multicast IP of the bandwidth control range. |
| IP mcastBwEndIp | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.3 | IpAddress | read-only | The end multicast IP of the bandwidth control range. |
| INT mcastBwBandwidth | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.4 | INTEGER | read-create | The bandwidth budget for the multicast IP channels. |
| ROW mcastBwRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.5 | RowStatus | read-create | The row status of the entry. |
| mcastBwPortTable | 1.3.6.1.4.1.6321.1.2.3.2.7.4.4 | not-accessible | This table specify the multicast bandwidth control of the port. | |
| mcastBwPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1 | not-accessible | An entry of mcastBwPortTable. | |
| INT mcastBwPortEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1.1 | INTEGER | read-write | Enable/disable multicast bandwidth control for a port. |
| INT mcastBwPortBandwidth | 1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1.2 | INTEGER | read-write | Set bandwidth threshold for a port. |
| igmpCount | 1.3.6.1.4.1.6321.1.2.3.2.7.5 | |||
| igmpCountPortTable | 1.3.6.1.4.1.6321.1.2.3.2.7.5.1 | not-accessible | This table specify the IGMP count limiting of the port. | |
| igmpCountPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1 | not-accessible | An entry of igmpCountPortTable. | |
| INT igmpCountPortEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1.1 | INTEGER | read-write | Enable/disable IGMP count limiting for a port. |
| INT igmpCountPortLimit | 1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1.2 | INTEGER | read-write | The maximum allowed IGMP report count for a port. |
| mvlan | 1.3.6.1.4.1.6321.1.2.3.2.7.6 | |||
| INT maxNumOfMvlan | 1.3.6.1.4.1.6321.1.2.3.2.7.6.1 | INTEGER | read-only | The maximum number of row entries that user can create in mvlanTable. |
| mvlanTable | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2 | not-accessible | A table containing static configuration information for each multicast VLAN configured into the device. | |
| mvlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1 | not-accessible | An entry of mvlanTable. | |
| VLA mvlanIndex | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.1 | VlanIndex | read-only | The VLAN-ID refering to this VLAN. |
| STR mvlanName | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.2 | DisplayString | read-create | An administratively assigned string, which may be used to identify the VLAN. |
| POR mvlanEgressPorts | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.3 | PortList | read-create | The set of ports which are permanently assigned to the egress list for this multicast VLAN. |
| POR mvlanUntaggedPorts | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.4 | PortList | read-create | The set of ports which should transmit egress packets for this multicast VLAN as untagged. |
| ROW mvlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.5 | RowStatus | read-create | This object indicates the status of this entry. |
| mvlanTranslateTable | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3 | not-accessible | A table that contains multicast to VLAN translation. | |
| mvlanTranslateEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1 | not-accessible | An entry of mvlanTranslateTable. | |
| INT mvlanTranslateIndex | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.1 | INTEGER | read-only | The index which specif the entry. |
| IP mvlanTranslateStartIp | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.2 | IpAddress | read-write | The start IP of the multicast VLAN translation. |
| IP mvlanTranslateEndIp | 1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.3 | IpAddress | read-write | The end IP of the multicast VLAN translation. |
| queryVid | 1.3.6.1.4.1.6321.1.2.3.2.7.7 | |||
| INT maxNumOfQryVid | 1.3.6.1.4.1.6321.1.2.3.2.7.7.1 | INTEGER | read-only | The maximum number of row entries that user can create in qryVidConfTable. |
| qryVidConfTable | 1.3.6.1.4.1.6321.1.2.3.2.7.7.2 | not-accessible | This table defines statically set VLANs used for response IGMP report. | |
| qryVidConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1 | not-accessible | An entry in qryVidConfTable. | |
| INT qryVid | 1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1.1 | INTEGER | read-only | VLAN ID. |
| ROW qryVidRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1.2 | RowStatus | read-create | This object indicates the status of this entry. |
| qryVidStatusTable | 1.3.6.1.4.1.6321.1.2.3.2.7.7.3 | not-accessible | This table shows statically set or dynamically learned VLANs used for response IGMP report. | |
| qryVidStatusEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.7.3.1 | not-accessible | An entry in qryVidStatusTable. | |
| INT qryVidType | 1.3.6.1.4.1.6321.1.2.3.2.7.7.3.1.1 | INTEGER | read-only | VLAN type. |
| INT igmpVersion | 1.3.6.1.4.1.6321.1.2.3.2.7.9 | INTEGER | read-write | Setting IGMP version. |
| INT igmpLeaveMode | 1.3.6.1.4.1.6321.1.2.3.2.7.10 | INTEGER | read-write | Configure IGMP leave message handling mode. |
| igmpTimer | 1.3.6.1.4.1.6321.1.2.3.2.7.11 | |||
| INT igmpQryInterval | 1.3.6.1.4.1.6321.1.2.3.2.7.11.1 | INTEGER | read-write | Set IGMP query interval, 10~1000 in seconds. |
| INT igmpRobust | 1.3.6.1.4.1.6321.1.2.3.2.7.11.2 | INTEGER | read-write | Set IGMP query Robustness, 1~5. |
| INT igmpQryRespInterval | 1.3.6.1.4.1.6321.1.2.3.2.7.11.3 | INTEGER | read-write | Set IGMP query response interval, 1~100 in 100 milliseconds. |
| INT igmpLastMemQryInterval | 1.3.6.1.4.1.6321.1.2.3.2.7.11.4 | INTEGER | read-write | Set IGMP Last Member Query interval, 1~5 in 100 milliseconds. |
| INT igmpLastMemQryRobust | 1.3.6.1.4.1.6321.1.2.3.2.7.11.5 | INTEGER | read-write | Set Last Member Query Robustness, 1~5. |
| auditQuery | 1.3.6.1.4.1.6321.1.2.3.2.7.12 | |||
| INT auditQryEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.12.1 | INTEGER | read-write | Enable/disable IGMP audit query. |
| INT auditQryInterval | 1.3.6.1.4.1.6321.1.2.3.2.7.12.2 | INTEGER | read-write | Set IGMP Audit Query Interval, 1~4 in 100 milliseconds. |
| INT auditQryRobust | 1.3.6.1.4.1.6321.1.2.3.2.7.12.3 | INTEGER | read-write | Set IGMP Audit Query Robustness, 1~5. |
| igmpProfile | 1.3.6.1.4.1.6321.1.2.3.2.7.13 | |||
| INT maxNumberOfIgmpProfiles | 1.3.6.1.4.1.6321.1.2.3.2.7.13.1 | INTEGER | read-only | The max number of IGMP profiles in the system. |
| igmpProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2 | not-accessible | A table that contains IGMP Profiles. | |
| igmpProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1 | not-accessible | The entry of IGMP Profile table. | |
| STR igmpProfileName | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.1 | DisplayString | read-only | The IGMP Profile name. |
| INT igmpProfileEnable | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.2 | INTEGER | read-write | Enable/disable IGMP Profile. |
| INT igmpProfileMaxGroup | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.3 | INTEGER | read-write | Set maximum allowed multicast group, 1~64. |
| ROW igmpProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.4 | RowStatus | read-create | The row status of the IGMP Profile entry. |
| igmpFilterTable | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3 | not-accessible | A table that contains IGMP Filters. | |
| igmpFilterEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1 | not-accessible | The entry of IGMP Filter table. | |
| INT igmpFilterIndex | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.1 | INTEGER | read-only | The index which specifies the filter rule. |
| IP igmpFilterStartIp | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.2 | IpAddress | read-create | The start IP of the filter rule. |
| IP igmpFilterEndIp | 1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.3 | IpAddress | read-create | The end IP of the filter rule. |
| igmpProfilePortTable | 1.3.6.1.4.1.6321.1.2.3.2.7.13.4 | not-accessible | This table specifies the IGMP Profile of the port. | |
| igmpProfilePortEntry | 1.3.6.1.4.1.6321.1.2.3.2.7.13.4.1 | not-accessible | An entry in igmpProfilePortTable. | |
| OCT igmpProfilePortProfile | 1.3.6.1.4.1.6321.1.2.3.2.7.13.4.1.1 | OCTET STRING | read-write | The IGMP Profile of the port. |
| port | 1.3.6.1.4.1.6321.1.2.3.2.8 | |||
| subrPortTable | 1.3.6.1.4.1.6321.1.2.3.2.8.1 | not-accessible | This table includes subscriber attributes for the port. | |
| subrPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.1.1 | not-accessible | An entry in subrPortTable. | |
| STR subrPortName | 1.3.6.1.4.1.6321.1.2.3.2.8.1.1.1 | DisplayString | read-write | Name of the subscriber. |
| STR subrPortTel | 1.3.6.1.4.1.6321.1.2.3.2.8.1.1.2 | DisplayString | read-write | Telephone number of the subscriber. |
| adslPort | 1.3.6.1.4.1.6321.1.2.3.2.8.2 | |||
| adslLineConfTable | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1 | not-accessible | This table includes common attributes describing the ADSL line. | |
| adslLineConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1 | not-accessible | An entry in adslLineConfTable. | |
| INT adslLineConfAdslMode | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.1 | INTEGER | read-write | G.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board. |
| INT adslLineConfAnnexL | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.2 | INTEGER | read-write | Enable/disable annex L for the port(Only in AnnexA). |
| INT adslLineConfAnnexM | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.3 | INTEGER | read-write | Enable/disable annex M for the port(For BCM AnnexA solution). |
| INT adslLineConfAnnexI | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.4 | INTEGER | read-write | Enable/disable annex I for the port(For BCM AnnexA solution). |
| INT adslLineConfOptionMask | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.5 | INTEGER | read-write | The semantic for each bit is: BIT 1 : Disable Trellis BIT 2 : Disable Reed-Solomon BIT 3 : Disable upstream bitswap BIT 4 : Disable downstream bitswap BIT 5 : Disable 1-bit constellation BIT 6 : Disable transmit windowing BIT 7 : Disable s=0.5 support (ADSL1 only) BIT 8 : Disable G.lite rate limit (ADSL1 only) BIT 9 : Enable Nitro BIT 10: Enable US PHYR BIT 11: ENABLE DS PHYR |
| INT adslLineConfPowerMgmt | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.6 | INTEGER | read-write | Enable/disable power management for the port. |
| INT adslLineConfPowerMode | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.7 | INTEGER | read-write | The power mode of the ADSL line. |
| INT adslLineConfAturMaxTxPower | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.8 | INTEGER | read-write | The maximum allowed transmit power of ATU-R. |
| INT adslLineConfAtucMaxTxPower | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.9 | INTEGER | read-write | The maximum allowed transmit power of ATU-C. |
| INT adslLineConfMaxRxPower | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.10 | INTEGER | read-write | The maximum aggregate received power. |
| OCT adslLineConfAturCarrierMask | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.11 | OCTET STRING | read-write | The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31; CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. Bit set to 1 indicates the bin is masked off. |
| OCT adslLineConfAtucCarrierMask0 | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.12 | OCTET STRING | read-write | The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255; CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255. Bit set to 1 indicates the bin is masked off. |
| OCT adslLineConfAtucCarrierMask1 | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.13 | OCTET STRING | read-write | The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off. |
| INT adslLineConfAturInp | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.14 | INTEGER | read-write | The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7. |
| INT adslLineConfAtucInp | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.15 | INTEGER | read-write | The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7. |
| INT adslLineConfL0Time | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.16 | INTEGER | read-write | Set the minimum time in seconds that the ADSL line must stay in L0 power mode before changing to the L2 power mode. For CTLM solution, the range is 120 ~ 65535; for BCM solution, the range is 10 ~ 65535. |
| INT adslLineConfL2Time | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.17 | INTEGER | read-write | Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535. |
| INT adslLineConfL2ATPR | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.18 | INTEGER | read-write | Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission power while it is in the L2 power mode. This is the largest individual power reduction allowed in the L2 power mode. For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB). |
| INT adslLineConfL2ATPRT | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.19 | INTEGER | read-write | the maximum Aggregate Transmit Power Reduction Total (ATPRT) in decibels (dB) that is permitted in the L2 power mode. This is the total transmit power decrease that is allowed to occur in the L2 power mode. For CTLM solution, the range is 1 ~ 40(dB); for BCM solution, the range is 0 ~ 15(dB). |
| INT adslLineConfMaxL2Rate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.20 | INTEGER | read-write | configured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.) |
| INT adslLineConfMinL2Rate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.21 | INTEGER | read-write | configured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.) |
| INT adslLineConfL0toL2Rate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.22 | INTEGER | read-write | configured transition L0 to L2 rate. (= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.) |
| INT adslLineConfNitro | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.23 | INTEGER | read-write | Enable/disable nitro mode for the port(For BCM solution). |
| INT adslLineConfUSPhyr | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.24 | INTEGER | read-write | Enable/disable Upstream PHYR for the port(For BCM solution). |
| INT adslLineConfDSPhyr | 1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.25 | INTEGER | read-write | Enable/disable Downstream PHYR for the port(For BCM solution). |
| adslPortBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3 | |||
| OCT adslPortTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.1 | OCTET STRING | read-write | The managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chaises) Byte 2~3: 0,0 Reserved(slot) Byte 4: 0, reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| INT adslPortOps | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.2 | INTEGER | read-write | The managed object is for ADSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set ADSL mode BIT 4: set line profile BIT 5: set alarm profile BIT 6: enable Annex L to be narrow mode(Only in AnnexA) BIT 7: enable Annex L to be wide mode(Only in AnnexA) BIT 8: disable Annex L(Only in AnnexA) BIT 9: enable Annex M (For BCM AnnexA solution) BIT 10: disable Annex M (For BCM AnnexA solution) BIT 11: enable Annex I (For BCM AnnexA solution) BIT 12: disable Annex I (For BCM AnnexA solution) BIT 13: set option mask BIT 14: enable power management mode to be L2 BIT 15: enable power management mode to be L2 BIT 16: disable power management mode BIT 17: set power mode to be fixed BIT 18: set power mode to be priority to power BIT 19: set power mode to be priority to rate BIT 20: set ATU-R max Tx power BIT 21: set ATU-C max Tx power BIT 22: set max Rx power BIT 23: set ATU-R carrier mask BIT 24: set ATU-C carrier mask BIT 25: set ATU-R INP minimum setting BIT 26: set ATU-C INP minimum setting |
| INT adslPortOps2 | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.3 | INTEGER | read-write | The managed object is for ADSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: set L0 Time BIT 2: set L2 Time BIT 3: set L2 ATPR BIT 4: set L2 ATPRT BIT 5: set maximum L2 rate BIT 6: set minimum L2 rate BIT 7: set transition L0 to L2 rate |
| INT adslModeForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.4 | INTEGER | read-write | G.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board. |
| STR adslLineProfileForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.5 | DisplayString | read-write | The ADSL line profile. |
| STR adslAlarmProfileForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.6 | DisplayString | read-write | The ADSL alarm profile. |
| INT adslOptionMaskForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.7 | INTEGER | read-write | The semantic for each bit is identical to the object adslLineConfOptionMask. |
| INT adslAturMaxTxPowerForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.8 | INTEGER | read-write | The maximum allowed transmit power of ATU-R. |
| INT adslAtucMaxTxPowerForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.9 | INTEGER | read-write | The maximum allowed transmit power of ATU-C. |
| INT adslMaxRxPowerForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.10 | INTEGER | read-write | The maximum aggregate received power. |
| OCT adslAturCarrierMaskForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.11 | OCTET STRING | read-write | The upstream carrier mask.For CTLM AnnexA solution, bin is from 0 to 31; CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. Bit set to 1 indicates the bin is masked off. |
| OCT adslAtucCarrierMask0ForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.12 | OCTET STRING | read-write | The downstream carrier mask from bin 32 to 255. Bit set to 1 indicates the bin is masked off. |
| OCT adslAtucCarrierMask1ForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.13 | OCTET STRING | read-write | The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off. |
| INT adslAturInpForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.14 | INTEGER | read-write | The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7. |
| INT adslAtucInpForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.15 | INTEGER | read-write | The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7. |
| INT adslL0TimeForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.16 | INTEGER | read-write | Set the minimum time in seconds that the ADSL line must stay in L0 power mode before changing to the L2 power mode. For CTLM solution, the range is 120 ~ 65535; for BCM solution, the range is 10 ~ 65535. |
| INT adslL2TimeForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.17 | INTEGER | read-write | Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535. |
| INT adslL2ATPRForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.18 | INTEGER | read-write | Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission power while it is in the L2 power mode. This is the largest individual power reduction allowed in the L2 power mode. For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB). |
| INT adslL2ATPRTForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.19 | INTEGER | read-write | the maximum Aggregate Transmit Power Reduction Total (ATPRT) in decibels (dB) that is permitted in the L2 power mode. This is the total transmit power decrease that is allowed to occur in the L2 power mode. For CTLM solution, the range is 1 ~ 40(dB); for BCM solution, the range is 0 ~ 15(dB). |
| INT adslMaxL2RateForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.20 | INTEGER | read-write | configured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.) |
| INT adslMinL2RateForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.21 | INTEGER | read-write | configured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.) |
| INT adslL0toL2RateForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.8.2.3.22 | INTEGER | read-write | configured transition L0 to L2 rate. (= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.) |
| adslLineStatusTable | 1.3.6.1.4.1.6321.1.2.3.2.8.2.4 | not-accessible | This table includes the ADSL line status. | |
| adslLineStatusEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1 | not-accessible | An entry in adslLineStatusTable. | |
| INT adslLineStatusMode | 1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1.1 | INTEGER | read-only | The link up mode of the ADSL line. |
| INT adslLineUpTime | 1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1.2 | INTEGER | read-only | The link up time of the ADSL line, in unit of seconds |
| powerMgmtParamTable | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5 | not-accessible | This table defines L0 to L2 power transition parameters. | |
| powerMgmtParamEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1 | not-accessible | An entry in powerMgmtParamTable. | |
| INT powerMgmtL0Time | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.1 | INTEGER | read-write | The object specifies the minimum time in L0 mode before L2 mode may be entered. |
| INT powerMgmtL2Time | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.2 | INTEGER | read-write | The object specifies the minimum time in L2 mode before trimming and in between power trims. |
| INT powerMgmtL2Atpr | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.3 | INTEGER | read-write | The maximum Aggregate Transmit Power Reduction. |
| INT powerMgmtL2Atprt | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.4 | INTEGER | read-write | The maximum Aggregate Transmit Power Reduction Total. |
| INT powerMgmtL2MinRate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.5 | INTEGER | read-write | The object specifies the minimum L2 rate. |
| INT powerMgmtL2MaxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.6 | INTEGER | read-write | The object specifies the maximum L2 rate. |
| INT powerMgmtL2ThreshRate | 1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.7 | INTEGER | read-write | The object specifies the rate threshold that triggers the line entering L0 or L2 mode. |
| powerMgmtPSDTable | 1.3.6.1.4.1.6321.1.2.3.2.8.2.6 | not-accessible | This table provides the PSD setting for both ATU-C and ATU-R. | |
| powerMgmtPSDEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1 | not-accessible | An entry in powerMgmtPSDTable. | |
| INT powerMgmtAtucMaxPSD | 1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1.1 | INTEGER | read-write | The object specifies the maximum ATU-C PSD. |
| INT powerMgmtAturMaxPSD | 1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1.2 | INTEGER | read-write | The object specifies the maximum ATU-R PSD. |
| pvc | 1.3.6.1.4.1.6321.1.2.3.2.8.4 | |||
| INT maxNumOfPvcs | 1.3.6.1.4.1.6321.1.2.3.2.8.4.1 | INTEGER | read-only | The maximum number of PVCs which could be created on a port. |
| pvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2 | not-accessible | This table includes PVC configuration. | |
| pvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1 | not-accessible | An entry in pvcTable. | |
| INT pvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT pvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA pvcPvid | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.3 | VlanIndex | read-only | Default VID of the pvc. |
| INT pvcPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.5 | INTEGER | read-create | 802.1p default priority of the pvc. |
| STR pvcProfileDS | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.6 | DisplayString | read-create | The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. |
| ROW pvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.7 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| STR pvcProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.8 | DisplayString | read-create | The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. |
| STR pvcAcName | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.11 | DisplayString | read-create | Access concentrator name for paepvc. |
| STR pvcServiceName | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.12 | DisplayString | read-create | Service name for paepvc. |
| INT pvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.13 | INTEGER | read-create | The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time. |
| pvcStateTable | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3 | not-accessible | This table show current PVC status. | |
| pvcStateEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1 | not-accessible | An entry in pvcStateTable. | |
| INT pvcStateVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT pvcStateVci | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA pvcStatePvid | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.3 | VlanIndex | read-only | Default VID of the pvc. |
| INT pvcStatePriority | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.4 | INTEGER | read-only | 802.1p default priority of the pvc. |
| STR pvcStateChannelType | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.8 | DisplayString | read-only | The value of this object identifies the channel type at runtime. |
| STR pvcStateEncap | 1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.9 | DisplayString | read-only | The value of this object identifies the channel encapsulation at runtime. |
| pvcUsRateLimitTable | 1.3.6.1.4.1.6321.1.2.3.2.8.4.4 | not-accessible | This table defines the upstream rate limit for each PVC. | |
| pvcUsRateLimitEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1 | not-accessible | An entry in pvcUsRateLimitTable. | |
| INT pvcUsRateLimitEnable | 1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1.1 | INTEGER | read-write | Enable/disable upstream rate limit for a PVC. |
| INT pvcUsRateLimit | 1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1.2 | INTEGER | read-write | Upstream rate limit in Kbps for a PVC. |
| ppvc | 1.3.6.1.4.1.6321.1.2.3.2.8.5 | |||
| INT maxNumOfPriorityPvcs | 1.3.6.1.4.1.6321.1.2.3.2.8.5.1 | INTEGER | read-only | The maximum number of priority PVCs which could be created on a port. |
| ppvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2 | not-accessible | This table includes priority PVC configuration. | |
| ppvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1 | not-accessible | An entry in ppvcTable. | |
| INT ppvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.1 | INTEGER | read-only | VPI of the ppvc. |
| INT ppvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.2 | INTEGER | read-only | VCI of the ppvc. |
| VLA ppvcPvid | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.3 | VlanIndex | read-only | Default VID of the ppvc. |
| INT ppvcEncap | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.4 | INTEGER | read-create | Encapsulation of the ppvc. |
| INT ppvcPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.5 | INTEGER | read-create | 802.1p default priority of the ppvc. |
| ROW ppvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.6 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| ppvcMemberTable | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4 | not-accessible | This table includes priority PVC member configuration. | |
| ppvcMemberEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1 | not-accessible | An entry in ppvcMemberTable. | |
| INT ppvcMemberVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.1 | INTEGER | read-only | VPI of the member ppvc. |
| INT ppvcMemberVci | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.2 | INTEGER | read-only | VCI of the member ppvc. |
| INT ppvcMemberPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.3 | INTEGER | read-only | 802.1p default priority of the member ppvc. |
| STR ppvcMemberProfileDS | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.4 | DisplayString | read-create | The profile of the member ppvc in DS side. |
| ROW ppvcMemberRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.5 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| STR ppvcMemberProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.6 | DisplayString | read-create | The profile of the member ppvc in US side. |
| rpvc | 1.3.6.1.4.1.6321.1.2.3.2.8.8 | |||
| rpvcGatewayTable | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1 | not-accessible | This table includes Routed Gateway configuration. | |
| rpvcGatewayEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1 | not-accessible | An entry in Routed Gateway table. | |
| IP rpvcGatewayIp | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.1 | IpAddress | read-only | IP of RPVC gateway. |
| VLA rpvcGatewayVlanId | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.2 | VlanIndex | read-write | Vlan id send to this RPVC gateway. |
| ROW rpvcGatewayRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.3 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| INT rpvcGatewayPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.4 | INTEGER | read-write | 802.1p p bit send to this RPVC gateway. |
| rpvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2 | not-accessible | This table includes RPVC configuration. | |
| rpvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1 | not-accessible | An entry in rpvcTable. | |
| INT rpvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.1 | INTEGER | read-only | VPI of the rpvc. |
| INT rpvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.2 | INTEGER | read-only | VCI of the rpvc. |
| STR rpvcDSProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.3 | DisplayString | read-create | The down stream profile of the rpvc. |
| STR rpvcUSProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.4 | DisplayString | read-create | The up stream profile of the rpvc. |
| IP rpvcIp | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.5 | IpAddress | read-only | The IP of the rpvc. |
| IP rpvcNetmask | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.6 | IpAddress | read-only | The IP mask of the rpvc IP. |
| IP rpvcGatewayIpAddress | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.7 | IpAddress | read-create | The gateway IP of rpvc. |
| ROW rpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.8 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| rpvcRouteDomainTable | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3 | not-accessible | This table includes RPVC route domain configuration. | |
| rpvcRouteDomainEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1 | not-accessible | An entry in rpvcRouteDomainTable. | |
| INT rpvcRouteDomainVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.1 | INTEGER | read-only | VPI of the rpvc. |
| INT rpvcRouteDomainVci | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.2 | INTEGER | read-only | VCI of the rpvc. |
| IP rpvcRouteDomainIp | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.3 | IpAddress | read-only | The route domain IP. |
| IP rpvcRouteDomainNetmask | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.4 | IpAddress | read-only | The IP mask of the route domain IP. |
| ROW rpvcRouteDomainRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.5 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| INT rpvcArpAgingTime | 1.3.6.1.4.1.6321.1.2.3.2.8.8.4 | INTEGER | read-write | Set RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg. |
| INT rpvcArpFlush | 1.3.6.1.4.1.6321.1.2.3.2.8.8.5 | INTEGER | read-write | Flush the RPVC ARP proxy table. |
| dsBcastDisableTable | 1.3.6.1.4.1.6321.1.2.3.2.8.9 | not-accessible | This table includes Down Stream Bcast configuration. | |
| dsBcastDisableEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.9.1 | not-accessible | An entry in Down Stream Bcast table. | |
| INT dsBcastDisableVlanId | 1.3.6.1.4.1.6321.1.2.3.2.8.9.1.1 | INTEGER | read-only | downstream broadcast disabled vid. |
| ROW dsBcastDisableRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.9.1.2 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| paepvc | 1.3.6.1.4.1.6321.1.2.3.2.8.10 | |||
| paepvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1 | not-accessible | This table includes PPPoAoE PVC configuration. | |
| paepvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1 | not-accessible | An entry of paepvcTable. | |
| INT paepvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT paepvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA paepvcPvid | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.3 | VlanIndex | read-only | Default VID of the pvc. |
| INT paepvcPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.5 | INTEGER | read-create | 802.1p default priority of the pvc. |
| STR paepvcProfileDS | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.6 | DisplayString | read-create | The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. |
| STR paepvcAcName | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.7 | DisplayString | read-create | Access concentrator name. |
| STR paepvcServiceName | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.8 | DisplayString | read-create | Service name. |
| INT paepvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.9 | INTEGER | read-create | The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time. |
| ROW paepvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.10 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| STR paepvcProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.11 | DisplayString | read-create | The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. |
| VLA paepvcCvid | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.12 | VlanIndex | read-create | Default C-VID of the pvc. |
| INT paepvcCPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.13 | INTEGER | read-create | 802.1p default C-priority of the pvc. |
| tlspvc | 1.3.6.1.4.1.6321.1.2.3.2.8.11 | |||
| tlspvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1 | not-accessible | This table includes Transparent LAN Service (TLS) PVC configuration. | |
| tlspvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1 | not-accessible | An entry of tlspvcTable. | |
| INT tlspvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT tlspvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA tlspvcSvid | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.3 | VlanIndex | read-only | s-tag VLAN ID of the pvc. |
| INT tlspvcSpriority | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.5 | INTEGER | read-create | s-tag priority of the pvc. |
| STR tlspvcProfileDS | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.6 | DisplayString | read-create | The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. |
| ROW tlspvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.7 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| STR tlspvcProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.8 | DisplayString | read-create | The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. |
| ipbpvc | 1.3.6.1.4.1.6321.1.2.3.2.8.12 | |||
| ipbpvcDomainTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.1 | not-accessible | This table includes ipbpvc domain configuration. This table is supported by R3.00 and later versions. | |
| ipbpvcDomainEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1 | not-accessible | An entry of ipbpvcDomainTable. | |
| OCT ipbpvcDomainName | 1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1.1 | OCTET STRING | read-only | Name of the domain. |
| ROW ipbpvcDomainRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1.2 | RowStatus | read-create | Row status of the table. |
| ipbpvcDomainVlanTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2 | not-accessible | This table includes ipbpvc domain VLAN configuration. This table is supported by R3.00 and later versions. | |
| ipbpvcDomainVlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1 | not-accessible | An entry of ipbpvcDomainVlanTable. | |
| VLA ipbpvcDomainVlanId | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.1 | VlanIndex | read-only | Set VLAN to join or leave the specified domain. |
| INT ipbpvcDomainDhcpVlanEnable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.2 | INTEGER | read-create | Enable/disable DHCP VLAN in a domain. |
| ROW ipbpvcDomainVlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.3 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| ipbpvcEdgeRouterTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3 | not-accessible | This table includes ipbpvc edge router configuration. This table is supported by R3.00 and later versions. | |
| ipbpvcEdgeRouterEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1 | not-accessible | An entry of ipbpvcEdgeRouterTable. | |
| IP ipbpvcEdgeRouterIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.1 | IpAddress | read-only | IP address of the edge router. |
| VLA ipbpvcEdgeRouterVid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.2 | VlanIndex | read-only | VLAN ID of the edge router. |
| INT ipbpvcEdgeRouterMask | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.3 | INTEGER | read-only | Netmask of the edge router. |
| ROW ipbpvcEdgeRouterRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.4 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| ipbpvcInterfaceTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4 | not-accessible | This table includes ipbpvc interface configuration. This table is supported by R3.00 and later versions. | |
| ipbpvcInterfaceEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1 | not-accessible | An entry of ipbpvcInterfaceTable. | |
| IP ipbpvcInterfaceIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.1 | IpAddress | read-only | IP address of the interface. |
| INT ipbpvcInterfaceMask | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.2 | INTEGER | read-only | Netmask of the interface. |
| VLA ipbpvcInterfaceVid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.3 | VlanIndex | read-only | VLAN ID of the interface. |
| INT ipbpvcInterfaceIfIndex | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.4 | INTEGER | read-create | IfIndex of the interface. |
| INT ipbpvcInterfaceVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.5 | INTEGER | read-create | VPI of the interface. |
| INT ipbpvcInterfaceVci | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.6 | INTEGER | read-create | VCI of the interface. |
| ROW ipbpvcInterfaceRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.7 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| ipbpvcRouteTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5 | not-accessible | This table includes ipbpvc route configuration. This table is supported by R3.00 and later versions. | |
| ipbpvcRouteEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1 | not-accessible | An entry of ipbpvcRouteTable. | |
| IP ipbpvcRouteIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.1 | IpAddress | read-only | IP address of the route. |
| INT ipbpvcRouteMask | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.2 | INTEGER | read-only | Netmask of the route. |
| IP ipbpvcRouteNextHop | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.3 | IpAddress | read-only | Next hop IP address of the route. |
| INT ipbpvcRouteMetric | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.4 | INTEGER | read-create | Metric of the route. |
| INT ipbpvcRoutePriority | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.5 | INTEGER | read-create | Priority of the route. Note that the default value of this object is 8, which means we keep the original priority of the packet(frame). |
| ROW ipbpvcRouteRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.6 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| ipbpvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6 | not-accessible | This table includes ipbpvc configuration. This table is supported by R3.00 and later versions. | |
| ipbpvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1 | not-accessible | An entry of ipbpvcTable. | |
| INT ipbpvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.1 | INTEGER | read-only | VPI of the PVC. |
| INT ipbpvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.2 | INTEGER | read-only | VCI of the PVC. |
| INT ipbpvcPvid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.3 | INTEGER | read-only | PVID of the PVC. |
| INT ipbpvcEncap | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.4 | INTEGER | read-create | Type of the PVC. |
| INT ipbpvcPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.5 | INTEGER | read-create | Priority of the PVC. |
| OCT ipbpvcProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.6 | OCTET STRING | read-create | Profile of the PVC. |
| INT ipbpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.7 | INTEGER | read-create | Row status of the table used to create/delete an entry. |
| OCT ipbpvcProfileUS | 1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.8 | OCTET STRING | read-create | US Profile of the PVC. |
| arpproxy | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8 | |||
| INT arpproxyAge | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.1 | INTEGER | read-write | Aging time of the ARP proxy. This object is supported by R3.00 and later versions. |
| arpproxyFlush | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2 | |||
| INT arpproxyFlushTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.1 | INTEGER | read-write | The target whose ARP table to be flushed. This object is supported by R3.00 and later versions. |
| INT arpproxyFlushOps | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.2 | INTEGER | read-write | Set the object to 1 to start flushing. This object is supported by R3.00 and later versions. |
| IP arpproxyFlushEdgeRouterIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.3 | IpAddress | read-write | Flush ARP table for the specified edge router. This object is supported by R3.00 and later versions. |
| VLA arpproxyFlushEdgeRouterVid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.4 | VlanIndex | read-write | Flush ARP table for the specified edge router. This object is supported by R3.00 and later versions. |
| IP arpproxyFlushInterfaceIp | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.5 | IpAddress | read-write | Flush ARP table for the specified interface. This object is supported by R3.00 and later versions. |
| INT arpproxyFlushInterfaceMask | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.6 | INTEGER | read-write | Flush ARP table for the specified interface. This object is supported by R3.00 and later versions. |
| VLA arpproxyFlushInterfaceVid | 1.3.6.1.4.1.6321.1.2.3.2.8.12.8.2.7 | VlanIndex | read-write | Flush ARP table for the specified interface. This object is supported by R3.00 and later versions. |
| voipPort | 1.3.6.1.4.1.6321.1.2.3.2.8.13 | |||
| voipSipLineConfTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1 | not-accessible | This table includes common attributes describing the VoIP line. | |
| voipSipLineConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1 | not-accessible | An entry in voipSipLineConfTable. | |
| OCT voipSipLineConfSipProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.1 | OCTET STRING | read-write | SIP profile name. |
| OCT voipSipLineConfSipCallSvcProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.2 | OCTET STRING | read-write | SIP call service profile name. |
| OCT voipSipLineConfDspProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.3 | OCTET STRING | read-write | DSP profile name. |
| portOperations | 1.3.6.1.4.1.6321.1.2.3.2.8.13.2 | |||
| OCT voipPortTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.13.2.1 | OCTET STRING | read-write | The managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chaises) Byte 2~3: 0,0 Reserved(slot) Byte 4: 0, Reserved Byte 5~11:Each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| INT voipPortOps | 1.3.6.1.4.1.6321.1.2.3.2.8.13.2.2 | INTEGER | read-write | The managed object is for VoIP configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port |
| OCT voipPortEnableStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.13.2.3 | OCTET STRING | read-only | This read only entry is for showing current voip enable/disable status of each port. The status is encoded as: Byte 1: 0, Reserved Byte 2~3: 0,0 Reserved Byte 4: 0, Reserved Byte 5~11:Each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| voipPortTelTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.3 | not-accessible | This table includes VoIP tel for the port. | |
| voipPortTelEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.3.1 | not-accessible | An entry in voipPortTelTable. | |
| STR voipPortTel | 1.3.6.1.4.1.6321.1.2.3.2.8.13.3.1.1 | DisplayString | read-write | VoIP's telephone number of the specified port. |
| voipPortGainTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.6 | not-accessible | This table includes Port Gain. | |
| voipPortGainEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1 | not-accessible | An entry in voipPortGainTable. | |
| INT voipPortTXGain | 1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1.1 | INTEGER | read-write | TX Gain of the port, -200~200 in unit of 0.1dB. |
| INT voipPortRXGain | 1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1.2 | INTEGER | read-write | RX Gain of the port, -200~200 in unit of 0.1dB. |
| voipH248LineConfTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7 | not-accessible | This table includes common attributes describing the VoIP line. | |
| voipH248LineConfEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1 | not-accessible | An entry in voipH248LineConfTable. | |
| OCT voipH248LineConfMgName | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.1 | OCTET STRING | read-only | MG name. |
| OCT voipH248LineConfDspProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.2 | OCTET STRING | read-write | DSP profile name. |
| OCT voipH248LineConfVBDProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.3 | OCTET STRING | read-write | DSP profile name for Voice Band Data (FAX or Modem) mode. |
| voipPortH248TerminationTable | 1.3.6.1.4.1.6321.1.2.3.2.8.13.8 | not-accessible | This table includes Termination name. | |
| voipPortH248TerminationEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.13.8.1 | not-accessible | An entry in voipPortH248TerminationTable. | |
| OCT voipPortH248TermName | 1.3.6.1.4.1.6321.1.2.3.2.8.13.8.1.1 | OCTET STRING | read-only | Termination name of MG. |
| dtpvc | 1.3.6.1.4.1.6321.1.2.3.2.8.14 | |||
| dtpvcTable | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1 | not-accessible | This table includes Double Tagging (DT) PVC configuration. | |
| dtpvcEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1 | not-accessible | An entry of dtpvcTable. | |
| INT dtpvcVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT dtpvcVci | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA dtpvcSvid | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.3 | VlanIndex | read-only | s-tag VLAN ID of the pvc. |
| INT dtpvcSpriority | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.4 | INTEGER | read-create | s-tag priority of the pvc. |
| VLA dtpvcCvid | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.5 | VlanIndex | read-create | c-tag VLAN ID of the pvc. |
| INT dtpvcCpriority | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.6 | INTEGER | read-create | c-tag priority of the pvc. |
| STR dtpvcDSProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.7 | DisplayString | read-create | The value of this object identifies the row in the atmProfileTable, which applies for this dtpvc in DS side. |
| STR dtpvcUSProfile | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.8 | DisplayString | read-create | The value of this object identifies the row in the atmProfileTable, which applies for this dtpvc in US side. |
| ROW dtpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.9 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| INT dtpvcSuperChannel | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.10 | INTEGER | read-create | Specified the configured DTPVC is a super channel. |
| STR dtpvcAcName | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.11 | DisplayString | read-create | Access concentrator name for paepvc. |
| STR dtpvcServiceName | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.12 | DisplayString | read-create | Service name for paepvc. |
| INT dtpvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.13 | INTEGER | read-create | The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time. |
| dtpvcStateTable | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2 | not-accessible | This table show current DTPVC status. | |
| dtpvcStateEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1 | not-accessible | An entry in dtpvcStateTable. | |
| INT dtpvcStateVpi | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.1 | INTEGER | read-only | VPI of the dtpvc. |
| INT dtpvcStateVci | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.2 | INTEGER | read-only | VCI of the dtpvc. |
| VLA dtpvcStateSvid | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.3 | VlanIndex | read-only | Default S-VID of the dtpvc. |
| INT dtpvcStateSPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.4 | INTEGER | read-only | S-priority of the dtpvc. |
| VLA dtpvcStateCvid | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.5 | VlanIndex | read-only | Default C-VID of the dtpvc. |
| INT dtpvcStateCPriority | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.6 | INTEGER | read-only | C-priority of the dtpvc. |
| STR dtpvcStateChannelType | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.8 | DisplayString | read-only | The value of this object identifies the channel type at runtime. |
| STR dtpvcStateEncap | 1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.9 | DisplayString | read-only | The value of this object identifies the channel encapsulation at runtime. |
| snrMgn | 1.3.6.1.4.1.6321.1.2.3.2.8.15 | |||
| snrMgnTable | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1 | not-accessible | A table containing the per port SNR Margin configuration. | |
| snrMgnEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1 | not-accessible | An entry of snrMgnTable. | |
| INT snrMgnMode | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.1 | INTEGER | read-write | Configure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configuration comes from line configuration. |
| INT snrMgnUcTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.2 | INTEGER | read-write | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| INT snrMgnUcMax | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.3 | INTEGER | read-write | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation. |
| INT snrMgnUcMin | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.4 | INTEGER | read-write | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down. |
| INT snrMgnUcDownshift | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.5 | INTEGER | read-write | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'. |
| INT snrMgnUcUpshift | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.6 | INTEGER | read-write | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'. |
| INT snrMgnUrTarget | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.7 | INTEGER | read-write | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| INT snrMgnUrMax | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.8 | INTEGER | read-write | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation. |
| INT snrMgnUrMin | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.9 | INTEGER | read-write | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down. |
| INT snrMgnUrDownshift | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.10 | INTEGER | read-write | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'. |
| INT snrMgnUrUpshift | 1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.11 | INTEGER | read-write | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'. |
| dslRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16 | |||
| dslRateTable | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1 | not-accessible | A table containing the per port DSL Rate configuration. | |
| dslRateEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1 | not-accessible | An entry of dslRateTable. | |
| INT dslRateMode | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.1 | INTEGER | read-write | Configure DSL Rate configuration mode of the specified ports. Profile: the DSL Rate configuration comes from DSL profile. Line: the DSL Rate configuration comes from line configuration. |
| INT dslRateLatencyMode | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.2 | INTEGER | read-only | The latency mode is fast or interleave |
| INT dslRateXtucMaxInterleaveDelay | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.3 | INTEGER | read-write | Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. |
| U32 dslRateXtucMaxTxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.4 | Unsigned32 | read-write | Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps. |
| U32 dslRateXtucMinTxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.5 | Unsigned32 | read-write | Configured Minimum Transmit rate for `Fast' or `Interleave' channels, in bps |
| INT dslRateXturMaxInterleaveDelay | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.6 | INTEGER | read-write | Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency |
| U32 dslRateXturMaxTxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.7 | Unsigned32 | read-write | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| U32 dslRateXturMinTxRate | 1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.8 | Unsigned32 | read-write | Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps. |
| gbond | 1.3.6.1.4.1.6321.1.2.3.2.8.51 | |||
| gbondGroupTable | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1 | not-accessible | A table containing the G.Bond configuration information for each bonding group of the device. | |
| gbondGroupEntry | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1 | not-accessible | An entry of gbondTable. | |
| OCT gbondGroupName | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.1 | OCTET STRING | read-only | An administratively assigned string, which may be used to identify bonding group. |
| OCT gbondGroupPorts | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.2 | OCTET STRING | read-create | The set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| U32 gbondGroupUpRate | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.4 | Unsigned32 | read-only | The UP stream rate. |
| U32 gbondGroupDownRate | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.5 | Unsigned32 | read-only | The DOWN stream rate. |
| ROW gbondGroupRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.6 | RowStatus | read-create | This object indicates the status of this entry. |
| profile | 1.3.6.1.4.1.6321.1.2.3.2.9 | |||
| voipProfile | 1.3.6.1.4.1.6321.1.2.3.2.9.7 | |||
| sipProfile | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1 | |||
| INT maxNumOfSipProfiles | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.1 | INTEGER | read-only | The maximum number of SIP profiles supported by the system. |
| sipProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2 | not-accessible | This table includes SIP protocol related configuration. | |
| sipProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1 | not-accessible | An entry in sipProfileTable. | |
| STR sipProfileName | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.1 | DisplayString | read-only | This object is used by the SIP profile table in order to identify a row of this table. |
| OCT sipProfileSipSvr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.2 | OCTET STRING | read-create | IP used for SIP registration or SIP domain name. |
| OCT sipProfileRegSvr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.3 | OCTET STRING | read-create | Registration server IP or registration server domain name. |
| OCT sipProfileProxySvr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.4 | OCTET STRING | read-create | Proxy server IP or proxy server doamin name. |
| INT sipProfileSipPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.5 | INTEGER | read-create | SIP UA port number. |
| INT sipProfileRegSvrPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.6 | INTEGER | read-create | Registration server port number. |
| INT sipProfileProxySvrPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.7 | INTEGER | read-create | Proxy server port number. |
| INT sipProfileUriType | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.8 | INTEGER | read-create | |
| INT sipProfilePbit | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.9 | INTEGER | read-create | 802.1p bit for SIP and RTP packet. |
| INT sipProfileDscp | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.10 | INTEGER | read-create | DSCP for SIP and RTP packet. |
| INT sipProfileKeepAlive | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.11 | INTEGER | read-create | |
| INT sipProfileSe | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.12 | INTEGER | read-create | Session expiration time in seconds. |
| INT sipProfilePrack | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.13 | INTEGER | read-create | |
| ROW sipProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.14 | RowStatus | read-create | This object is used to create a new row or delete an existing row in the table. |
| INT sipProfileRegExpire | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.15 | INTEGER | read-create | Registration expiration time in seconds. |
| INT maxNumOfSipCallSvcProfiles | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.3 | INTEGER | read-only | The maximum number of SIP call service profiles supported by the system. |
| sipCallSvcProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4 | not-accessible | This table includes SIP call service related configuration. | |
| sipCallSvcProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1 | not-accessible | An entry in sipCallSvcProfileTable. | |
| STR sipCallSvcProfileName | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.1 | DisplayString | read-only | This object is used by the SIP call service profile table in order to identify a row of this table. |
| INT sipCallSvcProfilePasswdOn | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.2 | INTEGER | read-create | Password is necessary or not for SIP registration. |
| OCT sipCallSvcProfilePasswd | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.3 | OCTET STRING | read-create | SIP registration password. |
| INT sipCallSvcProfileNumberPlanOn | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.4 | INTEGER | read-create | |
| OCT sipCallSvcProfileNumberPlanCc | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.5 | OCTET STRING | read-create | Country code, only digit 0..9 are allowed. |
| OCT sipCallSvcProfileNumberPlanNdc | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.6 | OCTET STRING | read-create | National destination code, only digit 0..9 are allowed. |
| OCT sipCallSvcProfileNumberPlanTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.7 | OCTET STRING | read-create | Numbering plan table name. |
| INT sipCallSvcProfileStateMask | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.8 | INTEGER | read-create | Bit 1 callforward : call forward(Not supported) Bit 2 callhold : call hold Bit 3 callwait : call waiting Bit 4 callreturn : call return(Not supported) Bit 5 calltransfer : call transfer Bit 6 clip : caller line identification presentation (Caller ID) Bit 7 clir : caller line identification restriction Bit 8 dnd : do not disturb Bit 9 conference : native 3-way conference |
| INT sipCallSvcProfileDtmf | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.9 | INTEGER | read-create | dtmf bypass : bypass DTMF tone dtmf rfc2833 : DTMF tone relay according to RFC2833 dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload dtmf sipinfo : DTMF tone relay by SIP INFO message |
| INT sipCallSvcProfileFax | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.10 | INTEGER | read-create | fax g711 : FAX service pass through by ITU-T G.711 fax t38 : FAX service by ITU-T T.38 |
| ROW sipCallSvcProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.11 | RowStatus | read-create | This object is used to create a new row or delete an existing row in the table. |
| INT sipCallSvcProfileFlashType | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.12 | INTEGER | read-create | flash invite : will send SIP INVITE message while press flash button. flash bypass : flash event will be handled by current switch type specified in sipCallSvcProfileSwitchType. flash rfc2833 : flash event will send by RTP event (16) defined in RFC 2833. flash rfc2833like : flash event will send by SIP INFO message but RTP payload. flash sipinfo-1 : flash event will be sent by SIP INFO signal=16 message. flash sipinfo-2 : flash event will be sent by SIP INFO signal=hf message. flash sipinfo-3 : flash event will be sent by SIP INFO signal=hook-flash message. flash sipinfo-4 : flash event will be sent by SIP INFO plain text 'FLASH' message. flash sipinfo-5 : flash event will be sent by multiple SIP INFO signal messages and content of signal messages come from sipCallSvcProfileFlashInfo. flash sipinfo-6 : flash event will be sent by SIP INFO and payload is specified in sipCallSvcProfileFlashInfo. |
| OCT sipCallSvcProfileFlashInfo | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.13 | OCTET STRING | read-create | Strings carried in SIP INFO when specified in sipCallSvcProfileFlashType is sipinfo-5 and sipinfo-6. |
| INT sipCallSvcProfileSoftSwitchType | 1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.14 | INTEGER | read-create | Softswitch type is configured to specify softswitch-dependent behavior, currently only flash event is softswitch-dependent and should follow the softswitch type setting. When configured the flash event to 'bypass', E5 will follow the softswitch type setting to report hook flash event. |
| INT maxNumOfDspProfiles | 1.3.6.1.4.1.6321.1.2.3.2.9.7.2 | INTEGER | read-only | The maximum number of DSP profiles supported by the system. |
| dspProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3 | not-accessible | This table includes DSP related configuration. | |
| dspProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1 | not-accessible | An entry in dspProfileTable. | |
| STR dspProfileName | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.1 | DisplayString | read-only | This object is used by the DSP profile table in order to identify a row of this table. |
| OCT dspProfileCodec | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.2 | OCTET STRING | read-create | 0x01: g711a 0x02: g711mu 0x03: g723 0x04: g726-16 0x05: g726-24 0x06: g726-32 0x07: g726-40 0x08: g729ab the value of dspProfileCodec is OCTET STRING, there are 8 Octets, each octect is specified as 0x01, 0x03, 0x02, 0x07,0x00, 0x00, 0x00, 0x00 (to specify different CODE in priority) specify as: g711a, g723, g711mu, g726-40 |
| INT dspProfilePlayBufferMinDelay | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.3 | INTEGER | read-create | Play buffer minimum delay in milliseconds. It should be less than or equal to dspProfilePlayBufferMaxDelay. |
| INT dspProfilePlayBufferMaxDelay | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.4 | INTEGER | read-create | Play buffer maximum delay in milliseconds. It should be greater than or equal to dspProfilePlayBufferMinDelay. |
| INT dspProfileEchoTail | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.5 | INTEGER | read-create | Echo cancellation echo tail period in milliseconds. |
| ROW dspProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.6 | RowStatus | read-create | This object is used to create a new row or delete an existing row in the table. |
| INT dspProfileG711Vpi | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.7 | INTEGER | read-create | Voice Packetization Interval(VPI) of codec G.711 in milliseconds. The values are 10, 20, 30, 40 |
| INT dspProfileG723Vpi | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.8 | INTEGER | read-create | Voice Packetization Interval(VPI) of G.723 codec in milliseconds. The values are 30,60 |
| INT dspProfileG726Vpi | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.9 | INTEGER | read-create | Voice Packetization Interval(VPI) of G.726 codec in milliseconds. The values are 10, 20, 30, 40 |
| INT dspProfileG729Vpi | 1.3.6.1.4.1.6321.1.2.3.2.9.7.3.1.10 | INTEGER | read-create | Voice Packetization Interval(VPI) of G.729 codec in milliseconds. The values are 10, 20, 30, 40, 50, 60 |
| h248Profile | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4 | |||
| INT maxNumOfH248Profiles | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.1 | INTEGER | read-only | The maximum number of H248 profiles supported by the system. |
| h248ProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2 | not-accessible | This table includes H248 profile related configuration. | |
| h248ProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1 | not-accessible | An entry in h248ProfileTable. | |
| STR h248ProfileName | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.1 | DisplayString | read-only | This object is used by the H248 profile table in order to identify a row of this table. |
| OCT h248ProfileMgcSvr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.2 | OCTET STRING | read-create | MGC IP or MGC doamin name. |
| INT h248ProfileMgcPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.3 | INTEGER | read-create | MGC port number. |
| INT h248ProfileMgc2On | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.4 | INTEGER | read-create | Secondary MGC on/off. |
| OCT h248ProfileMgc2Svr | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.5 | OCTET STRING | read-create | Secondary MGC IP or MGC doamin name. h248ProfileMgc2On needs to turn on if user want to set Secondary MGC IP or domain name. |
| INT h248ProfileMgc2Port | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.6 | INTEGER | read-create | Secondary MGC port number. h248ProfileMgc2On needs to turn on if user want to set Secondary MGC port number. |
| INT h248ProfileTransport | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.7 | INTEGER | read-create | Transport procotol used by the H.248 protocol stack. |
| INT h248ProfileEncode | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.8 | INTEGER | read-create | Encoding type used by the H.248 protocol stack |
| INT h248ProfilePbit | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.9 | INTEGER | read-create | 802.1p bit for H.248 packet. |
| INT h248ProfileDscp | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.10 | INTEGER | read-create | DSCP for H.248 packet. |
| ROW h248ProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.11 | RowStatus | read-create | This object is used to create a new row or delete an existing row in the table. |
| INT h248ProfileVbd | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.12 | INTEGER | read-create | VBD mode support on/off |
| STR h248ProfileEphemeralPrefix | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.14 | DisplayString | read-create | Ephemeral Termination Prefix |
| INT h248ProfileSoftswitch | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.15 | INTEGER | read-create | Softswitch type |
| INT h248ProfileForceVer | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.16 | INTEGER | read-create | Force using H.248 version 1 |
| INT h248ProfileStartRTPPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.17 | INTEGER | read-create | Start of RTP port number. |
| INT h248ProfileEndRTPPort | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.18 | INTEGER | read-create | End of RTP port number. |
| OCT h248ProfileEphemeralStartNumber | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.19 | OCTET STRING | read-create | Ephemeral termination suffix start number, up to 15 digits. |
| INT h248ProfileEphemeralSuffixLength | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.20 | INTEGER | read-create | Ephemeral termination suffix number length , padding zero at the front if not long enough. |
| STR h248ProfilePhysicalPrefix | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.21 | DisplayString | read-create | Physical Termination Prefix. |
| OCT h248ProfilePhysicalStartNumber | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.22 | OCTET STRING | read-create | Physical termination suffix start number, up to 15 digits. |
| INT h248ProfilePhysicalSuffixLength | 1.3.6.1.4.1.6321.1.2.3.2.9.7.4.2.1.23 | INTEGER | read-create | Physical termination suffix number length , padding zero at the front if not long enough. |
| switch | 1.3.6.1.4.1.6321.1.2.3.2.10 | |||
| dscp | 1.3.6.1.4.1.6321.1.2.3.2.10.10 | |||
| dscpMappingTable | 1.3.6.1.4.1.6321.1.2.3.2.10.10.1 | not-accessible | The table contains DSCP mapping configuration for the adsl and ethernet ports. | |
| dscpMappingEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.10.1.1 | not-accessible | An entry of dscpMappingTable. | |
| INT dscpSrcCodePoint | 1.3.6.1.4.1.6321.1.2.3.2.10.10.1.1.1 | INTEGER | read-only | The DSCP source code point used for mapping. |
| INT dscpMapPriority | 1.3.6.1.4.1.6321.1.2.3.2.10.10.1.1.3 | INTEGER | read-write | The mapping p bits that will replace the source p bits in the incoming packet. |
| dscpPortTable | 1.3.6.1.4.1.6321.1.2.3.2.10.10.2 | not-accessible | The table contains DSCP mapping configuration for the adsl and ethernet ports. | |
| dscpPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.10.2.1 | not-accessible | An entry of dscpPortTable. | |
| INT dscpStatusEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.10.2.1.1 | INTEGER | read-write | The DSCP port status. |
| vlanIsolation | 1.3.6.1.4.1.6321.1.2.3.2.10.12 | |||
| vlanIsolationTable | 1.3.6.1.4.1.6321.1.2.3.2.10.12.1 | not-accessible | A table contains configuration of isolated VLAN. | |
| vlanIsolationEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.12.1.1 | not-accessible | An entry of vlanIsolationTable. | |
| ROW vlanIsolationRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.12.1.1.1 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| enetMtu | 1.3.6.1.4.1.6321.1.2.3.2.10.13 | |||
| INT enetMtuEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.13.1 | INTEGER | read-write | Sets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526. |
| dhcp | 1.3.6.1.4.1.6321.1.2.3.2.10.51 | |||
| dhcpRelay82Table | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2 | not-accessible | A table that contains DHCP Relay configuration. | |
| dhcpRelay82Entry | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1 | not-accessible | The entry of DHCP Relay table. | |
| IP dhcpRelay82PrimaryServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.1 | IpAddress | read-write | The IP address of the DHCP Relay primary server. |
| IP dhcpRelay82SecondaryServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.2 | IpAddress | read-write | The IP address of the DHCP Relay secondary server. |
| INT dhcpRelay82ActiveServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.3 | INTEGER | read-only | The current active DHCP Relay server. |
| INT dhcpRelay82Enable | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.4 | INTEGER | read-create | Enable/disable DHCP relay and Option82 function. |
| STR dhcpRelay82Info | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.5 | DisplayString | read-create | User specific Option82 information. |
| INT dhcpRelay82RelayMode | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.6 | INTEGER | read-create | DHCP relay mode. |
| INT dhcpRelay82Suboption2Enable | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.8 | INTEGER | read-create | Enable/disable Option 82 sub-option 2. |
| STR dhcpRelay82Suboption2Info | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.9 | DisplayString | read-create | User specified information for Option 82 sub-option 2. |
| INT dhcpRelay82EntryEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.10 | INTEGER | read-create | Enable/disable DHCP Relay |
| INT dhcpRelay82EntryOptionMode | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.11 | INTEGER | read-create | Option82 format. |
| IP dhcpRelay82VlanIp | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.12 | IpAddress | read-write | The IP address of the DHCP Relay interface for this VLAN. |
| INT dhcpRelay82VlanMask | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.13 | INTEGER | read-write | The network mask of the DHCP Relay interface for this VLAN. |
| IP dhcpRelay82VlanGateway | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.14 | IpAddress | read-write | The gateway of the DHCP Relay interface for this VLAN. |
| IP dhcpRelay82ThirdServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.15 | IpAddress | read-write | The IP address of the DHCP Relay third server. |
| IP dhcpRelay82FourthServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.16 | IpAddress | read-write | The IP address of the DHCP Relay fourth server. |
| IP dhcpRelay82FifthServer | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.17 | IpAddress | read-write | The IP address of the DHCP Relay fifth server. |
| INT dhcpRelay82ServerVid | 1.3.6.1.4.1.6321.1.2.3.2.10.51.2.1.18 | INTEGER | read-write | The VID of the DHCP Relay server for this VLAN. |
| dhcpRelayTest | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8 | |||
| INT dhcpRelayTestVid | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8.1 | INTEGER | read-write | Setting the VID of the test server. |
| IP dhcpRelayTestIp | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8.2 | IpAddress | read-write | Setting the IP of the test server. |
| INT dhcpRelayTestOps | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8.3 | INTEGER | read-write | Set the object to 1 to test DHCP server. |
| STR dhcpRelayTestStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.51.8.4 | DisplayString | read-only | Display testing server status. |
| dhcpRelayArp | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9 | |||
| dhcpRelayArpShowTable | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1 | not-accessible | The table displays DHCP ARP. | |
| dhcpRelayArpShowEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1.1 | not-accessible | An entry of dhcpRelayArpShowTable. | |
| INT dhcpRelayArpShowVid | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1.1.1 | INTEGER | read-only | Display the VID of the DHCP ARP entry. |
| IP dhcpRelayArpShowIp | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1.1.2 | IpAddress | read-only | Display the IP of the DHCP ARP entry. |
| PHY dhcpRelayArpShowMac | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.1.1.3 | PhysAddress | read-only | Display the MAC of the DHCP ARP entry. |
| INT dhcpRelayArpFlushOps | 1.3.6.1.4.1.6321.1.2.3.2.10.51.9.2 | INTEGER | read-write | Set the object to 1 to start flushing. |
| macfilter | 1.3.6.1.4.1.6321.1.2.3.2.10.53 | |||
| macFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1 | not-accessible | This table includes the status of mac filtering for each port. | |
| macFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1.1 | not-accessible | An entry in macFilterPortTable. | |
| INT macFilterPortEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1.1.1 | INTEGER | read-write | Enable/disable MAC filtering for the port. |
| INT macFilterPortMacCount | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1.1.2 | INTEGER | read-write | The total number of MAC addresses allowed for the port. |
| INT macFilterPortFilterMode | 1.3.6.1.4.1.6321.1.2.3.2.10.53.1.1.3 | INTEGER | read-write | The mac filter mode (accept or deny) for the port. |
| INT maxNumOfMacFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.2.10.53.2 | INTEGER | read-only | The max number of mac filters supported in the system. |
| INT maxNumOfMacFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.2.10.53.3 | INTEGER | read-only | The max number of mac filters supported per port. |
| INT currNumOfMacFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.2.10.53.4 | INTEGER | read-only | The current number of mac filters in the system. |
| macFilterTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.5 | not-accessible | A table that contains the mac filter addresses. | |
| macFilterEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.5.1 | not-accessible | The entry of macFilterTable. | |
| PHY macFilterAddr | 1.3.6.1.4.1.6321.1.2.3.2.10.53.5.1.1 | PhysAddress | read-only | The mac address which can pass through or be rejected from the port. |
| ROW macFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.53.5.1.2 | RowStatus | read-create | The row status of the entry. |
| macfilterBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.10.53.6 | |||
| OCT macfilterTarget | 1.3.6.1.4.1.6321.1.2.3.2.10.53.6.1 | OCTET STRING | read-write | This managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis) Byte 2~3: 0, Reserved(slot) Byte 4: 0, reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| INT macfilterOps | 1.3.6.1.4.1.6321.1.2.3.2.10.53.6.2 | INTEGER | read-write | The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable mac filter BIT 4: set mac count BIT 5: disable mac count filter. |
| INT macFilterMacCountForBatchSet | 1.3.6.1.4.1.6321.1.2.3.2.10.53.6.3 | INTEGER | read-write | The total number of MAC addresses allowed for a port. |
| ouiFilterTableOld | 1.3.6.1.4.1.6321.1.2.3.2.10.53.7 | not-accessible | A table that contains the OUI filter addresses. | |
| ouiFilterEntryOld | 1.3.6.1.4.1.6321.1.2.3.2.10.53.7.1 | not-accessible | The entry of ouiFilterTableOld. | |
| OCT ouiFilterAddrOld | 1.3.6.1.4.1.6321.1.2.3.2.10.53.7.1.1 | OCTET STRING | read-only | The first three bytes of the mac address which can pass through or be rejected from the port. |
| ROW ouiFilterRowStatusOld | 1.3.6.1.4.1.6321.1.2.3.2.10.53.7.1.2 | RowStatus | read-create | The row status of the entry. |
| INT maxNumOfOuiFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.2.10.53.8 | INTEGER | read-only | The max number of OUI filters supported per port. |
| ouiFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.9 | not-accessible | This table includes the status of oui filtering for each port. | |
| ouiFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.9.1 | not-accessible | An entry in macFilterPortTable. | |
| INT ouiFilterPortEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.9.1.1 | INTEGER | read-write | Enable/disable oui filtering for the port. |
| INT ouiFilterPortFilterMode | 1.3.6.1.4.1.6321.1.2.3.2.10.53.9.1.2 | INTEGER | read-write | The oui filter mode (accept or deny) for the port. |
| INT maxNumOfOuiFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.2.10.53.10 | INTEGER | read-only | The max number of OUI filters supported in system. |
| INT maxNumOfOuiFiltersPerVlan | 1.3.6.1.4.1.6321.1.2.3.2.10.53.11 | INTEGER | read-only | The max number of OUI filters supported per vlan. |
| ouiFilterTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.12 | not-accessible | A table that contains the OUI filter addresses. | |
| ouiFilterEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.12.1 | not-accessible | The entry of ouiFilterTable. | |
| OCT ouiFilterAddr | 1.3.6.1.4.1.6321.1.2.3.2.10.53.12.1.1 | OCTET STRING | read-only | The first three bytes of the mac address which can pass through or be rejected from the vlan. |
| ROW ouiFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.53.12.1.2 | RowStatus | read-create | The row status of the entry. |
| ouiFilterVlanTable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.13 | not-accessible | This table includes the status of oui filtering for each configured VLAN. | |
| ouiFilterVlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.53.13.1 | not-accessible | An entry in ouiFilterVlanTable. | |
| INT ouiFilterVlanEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.53.13.1.1 | INTEGER | read-write | Enable/disable oui filtering for the VLAN. |
| INT ouiFilterVlanFilterMode | 1.3.6.1.4.1.6321.1.2.3.2.10.53.13.1.2 | INTEGER | read-write | The oui filter mode (accept or deny) for the VLAN. |
| dhcpSnoop | 1.3.6.1.4.1.6321.1.2.3.2.10.55 | |||
| dhcpSnoopPortTable | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1 | not-accessible | This table includes DHCP snooping enable/disable for each port. | |
| dhcpSnoopPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1.1 | not-accessible | An entry of dhcpSnoopPortTable. | |
| INT dhcpSnoopEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1.1.1 | INTEGER | read-write | Enable/disable DHCP snooping for a port. |
| INT dhcpSnoopMaxcnt | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1.1.2 | INTEGER | read-write | Set the max entries of the DHCP ARP table. |
| INT dhcpSnoopSmacverifyEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.55.1.1.3 | INTEGER | read-write | Enable/disable DHCP source MAC verify for a port. |
| OCT dhcpSnoopTarget | 1.3.6.1.4.1.6321.1.2.3.2.10.55.2 | OCTET STRING | read-write | This managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| INT dhcpSnoopOps | 1.3.6.1.4.1.6321.1.2.3.2.10.55.3 | INTEGER | read-write | The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush. |
| dhcpStaticTable | 1.3.6.1.4.1.6321.1.2.3.2.10.55.4 | not-accessible | This table defines DHCP static IP addresses. | |
| dhcpStaticEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.55.4.1 | not-accessible | An entry of dhcpStaticTable. | |
| IP dhcpStaticIpAddr | 1.3.6.1.4.1.6321.1.2.3.2.10.55.4.1.1 | IpAddress | read-only | The IP address which can pass through the port. |
| ROW dhcpStaticRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.55.4.1.2 | RowStatus | read-create | Row status of the table entry. |
| INT maxNumOfDhcpStaticIp | 1.3.6.1.4.1.6321.1.2.3.2.10.55.5 | INTEGER | read-only | The maximum number of DHCP static IP addresses which can be created for a port. |
| INT dhcpSnoopMaxcntMode | 1.3.6.1.4.1.6321.1.2.3.2.10.55.6 | INTEGER | read-write | When DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1. |
| acl | 1.3.6.1.4.1.6321.1.2.3.2.10.56 | |||
| aclSetTable | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1 | not-accessible | aclsetTable. | |
| aclSetEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1 | not-accessible | An entry of aclSetTable. | |
| INT aclSetVpi | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1.1 | INTEGER | read-only | VPI value |
| INT aclSetVci | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1.2 | INTEGER | read-only | VCI value |
| STR aclSetProfileName | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1.3 | DisplayString | read-only | ACL Profile name |
| ROW aclSetRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.56.1.1.4 | RowStatus | read-write | RowStatus of aclSetEntry |
| aclProfileTable | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2 | not-accessible | aclProfileTable. | |
| aclProfileEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1 | not-accessible | An entry of aclProfileTable. | |
| STR aclProfileRuleName | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.1 | DisplayString | read-only | Profile rule name |
| INT aclProfileRuleNumber | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.2 | INTEGER | read-write | The managed object is for acl profile rule configuration. etype vlan (1), etype smac (2), etype dmac (3), vlan smac (4), vlan dmac (5), smac dmac (6), vlan priority (7), etype (8), vlan (9), smac (10), dmac (11), priority (12), protocol (13), {srcip /{|dstip /{|tos {|srcport {|dstport }}}}} (14) |
| INT aclProfileActionNumber | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.3 | INTEGER | read-write | Profile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection. |
| INT aclProfileRuleParamMask | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.4 | INTEGER | read-write | Profile rule parameter mask. BIT 1: srcip / BIT 2: dstip / BIT 3: tos BIT 4: srcport BIT 5: dstport |
| INT aclProfileRuleEtype | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.5 | INTEGER | read-write | Profile rule etype |
| INT aclProfileRuleVid | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.6 | INTEGER | read-write | Profile rule vid |
| PHY aclProfileRuleSmac | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.7 | PhysAddress | read-write | Profile rule source MAC |
| PHY aclProfileRuleDmac | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.8 | PhysAddress | read-write | Profile rule destination MAC |
| INT aclProfileRulePriority | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.9 | INTEGER | read-write | Profile rule priority |
| INT aclProfileRuleProtocol | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.10 | INTEGER | read-write | Profile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype |
| IP aclProfileRuleSrcIP | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.11 | IpAddress | read-write | Profile rule source IP |
| INT aclProfileRuleSrcIPMask | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.12 | INTEGER | read-write | The subnet mask of source IP mask |
| IP aclProfileRuleDestIP | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.13 | IpAddress | read-write | Profile rule source IP |
| INT aclProfileRuleDestIPMask | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.14 | INTEGER | read-write | The subnet mask of dest IP mask |
| INT aclProfileRuleStartTos | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.15 | INTEGER | read-write | Profile rule start type of service |
| INT aclProfileRuleEndTos | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.16 | INTEGER | read-write | Profile rule end type of service |
| INT aclProfileRuleSrcStartPort | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.17 | INTEGER | read-write | Profile rule source start port |
| INT aclProfileRuleSrcEndPort | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.18 | INTEGER | read-write | Profile rule source end port |
| INT aclProfileRuleDestStartPort | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.19 | INTEGER | read-write | Profile rule destination start port |
| INT aclProfileRuleDestEndPort | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.20 | INTEGER | read-write | Profile rule destination end port |
| INT aclProfileActionRate | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.21 | INTEGER | read-write | Profile action to replace to this rate |
| INT aclProfileActionrvlan | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.22 | INTEGER | read-write | Profile action to replace to this vlan |
| INT aclProfileActionrpri | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.23 | INTEGER | read-write | Profile action to replace to this priority |
| ROW aclProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.56.2.1.24 | RowStatus | read-write | The row status of the entry. |
| pppoeAgent | 1.3.6.1.4.1.6321.1.2.3.2.10.57 | |||
| pppoeAgentTable | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1 | not-accessible | A table that contains PPPoE DHCP Relay configuration. | |
| pppoeAgentEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1 | not-accessible | An entry of pppoeAgentTable. | |
| INT pppoeAgentEnable | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1.1 | INTEGER | read-create | Enable/disable DHCP relay and Option82 function. |
| STR pppoeAgentInfo | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1.2 | DisplayString | read-create | User specific Option82 information. |
| ROW pppoeAgentRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1.3 | RowStatus | read-create | Row status of the table entry. |
| INT pppoeAgentOptionMode | 1.3.6.1.4.1.6321.1.2.3.2.10.57.1.1.4 | INTEGER | read-create | Option82 format. |
| INT maxNumOfPppoeDhcpRelay82Conf | 1.3.6.1.4.1.6321.1.2.3.2.10.57.2 | INTEGER | read-only | The maximum number of rows that can be created in pppoeAgentTable. |
| macff | 1.3.6.1.4.1.6321.1.2.3.2.10.60 | |||
| macFfTable | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1 | not-accessible | A table that contains MAC Force Forwarding configuration. | |
| macFfEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1 | not-accessible | An entry of macFfTable. | |
| INT macFfIndex | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.1 | INTEGER | read-only | Index of the MACFF. |
| INT macFfVid | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.2 | INTEGER | read-write | The VLAN-ID refering to this AR/AS. |
| IP macFfArIP | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.3 | IpAddress | read-write | IP of this AR/AS |
| IP macFfSrcIP | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.4 | IpAddress | read-write | The source IP address of the MACFF. |
| INT macFfSrcMask | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.5 | INTEGER | read-write | The subnet mask of source IP mask. |
| ROW macFfRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.60.1.1.6 | RowStatus | read-create | The row status of the MacFfEntry entry. |
| INT macFfArpFlush | 1.3.6.1.4.1.6321.1.2.3.2.10.60.3 | INTEGER | read-write | Set the object to 1 to flush mac table. |
| INT maxNumOfMacFfVlanInSystem | 1.3.6.1.4.1.6321.1.2.3.2.10.60.4 | INTEGER | read-only | The max number of macff Vlans supported in the system. |
| macFfVlanTable | 1.3.6.1.4.1.6321.1.2.3.2.10.60.5 | not-accessible | A table that contains MAC Force Forwarding Vlan configuration. | |
| macFfVlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.60.5.1 | not-accessible | An entry of macFfVlanTable. | |
| ROW macFfVlanRowstatus | 1.3.6.1.4.1.6321.1.2.3.2.10.60.5.1.1 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| INT macFfVlanUnknownUnicast | 1.3.6.1.4.1.6321.1.2.3.2.10.60.5.1.2 | INTEGER | read-create | Setting downstream unknown uni-cast packet on macff vlan to flooding or dropping. |
| macFfStaticIPTable | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6 | not-accessible | ||
| macFfStaticIPEntry | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1 | not-accessible | An entry of macFfTable. | |
| INT macFfStaticIPPort | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.1 | INTEGER | read-only | The port number, 1 ~ 48. |
| INT macFfStaticIPVid | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.2 | INTEGER | read-only | VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first. |
| IP macFfstaticIP | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.3 | IpAddress | read-only | The specified IP range. |
| INT macFfStaticIPMask | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.4 | INTEGER | read-only | Mask_bits is 24 .. 32. |
| ROW macFfStaticIPRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.10.60.6.1.5 | RowStatus | read-create | The row status used to configure the table entry. |
| sys | 1.3.6.1.4.1.6321.1.2.3.2.11 | |||
| accessCtrl | 1.3.6.1.4.1.6321.1.2.3.2.11.5 | |||
| securedClientTable | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2 | not-accessible | A table that contains information about secured clients. | |
| securedClientEntry | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1 | not-accessible | A list of secured client entry. | |
| INT securedClientIndex | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.1 | INTEGER | read-only | The index of the entry. |
| IP securedClientStartIp | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.2 | IpAddress | read-write | The starting IP address of the secured client set. |
| IP securedClientEndIp | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.3 | IpAddress | read-write | The ending IP address of the secured client set. |
| INT securedClientService | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.4 | INTEGER | read-write | Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: ftp BIT 3: web BIT 4: icmp BIT 5: not support BIT 6: snmp. |
| INT securedClientEnable | 1.3.6.1.4.1.6321.1.2.3.2.11.5.2.1.5 | INTEGER | read-write | Enable/disable the entry. |
| extAlarm | 1.3.6.1.4.1.6321.1.2.3.2.11.8 | |||
| extAlarmTable | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1 | not-accessible | A table that contains external alarm information. | |
| extAlarmEntry | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1 | not-accessible | The entry of external alarm table. | |
| INT extAlarmIndex | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1.1 | INTEGER | read-only | The index of the entry. |
| STR extAlarmname | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1.2 | DisplayString | read-write | The external alarm name. |
| STR extAlarmstatus | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1.3 | DisplayString | read-only | Dispaly 'Normal' or 'Alarm' string |
| INT extAlarmTriggeredMode | 1.3.6.1.4.1.6321.1.2.3.2.11.8.1.1.4 | INTEGER | read-write | The external alarm triggered mode. |
| user | 1.3.6.1.4.1.6321.1.2.3.2.11.9 | |||
| INT userAuthMode | 1.3.6.1.4.1.6321.1.2.3.2.11.9.1 | INTEGER | read-write | User authentication procsssing mode. |
| IP userAuthServerIp | 1.3.6.1.4.1.6321.1.2.3.2.11.9.2 | IpAddress | read-write | The IP address of the authentication server. |
| INT userAuthServerPort | 1.3.6.1.4.1.6321.1.2.3.2.11.9.3 | INTEGER | read-write | The port of the authentication server. |
| OCT userAuthServerSecret | 1.3.6.1.4.1.6321.1.2.3.2.11.9.4 | OCTET STRING | read-write | The secret between the authentication server and the NE for authentication process. |
| userTable | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5 | not-accessible | A table that contains user information. | |
| userEntry | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1 | not-accessible | An entry of userTable. | |
| STR userName | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1.1 | DisplayString | read-only | The user name. |
| STR userPassword | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1.2 | DisplayString | read-create | The user password. |
| INT userPriviledge | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1.3 | INTEGER | read-create | The user priviledge to decide what operation the user can and cannot do. |
| ROW userRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.11.9.5.1.4 | RowStatus | read-create | The row status used to create or delete a user. |
| INT userAuthDefaultPriviledge | 1.3.6.1.4.1.6321.1.2.3.2.11.9.6 | INTEGER | read-write | The user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided. |
| usbCastCtrl | 1.3.6.1.4.1.6321.1.2.3.2.11.10 | |||
| INT usBcastCtrlEnable | 1.3.6.1.4.1.6321.1.2.3.2.11.10.1 | INTEGER | read-write | Enable/disable upstream broadcast control. |
| INT usBcastCtrlRate | 1.3.6.1.4.1.6321.1.2.3.2.11.10.2 | INTEGER | read-write | 32~49984 in step of 32kbps |
| dsbCastCtrl | 1.3.6.1.4.1.6321.1.2.3.2.11.11 | |||
| INT dsBcastCtrlEnable | 1.3.6.1.4.1.6321.1.2.3.2.11.11.1 | INTEGER | read-write | Enable/disable downstream broadcast control. |
| INT dsBcastCtrlRate | 1.3.6.1.4.1.6321.1.2.3.2.11.11.2 | INTEGER | read-write | 32~1000000 in step of 32 kbps |
| INT stdioTimeout | 1.3.6.1.4.1.6321.1.2.3.2.11.12 | INTEGER | read-write | Set the CLI/TELNET/WEB Session timeout, 0, or 1~300 minutes, 0 => disable. |
| INT isConfigChanged | 1.3.6.1.4.1.6321.1.2.3.2.11.13 | INTEGER | read-only | If system configuration has been changed. |
| fwUpgrade | 1.3.6.1.4.1.6321.1.2.3.2.11.14 | |||
| OCT fwUpgradeVersion | 1.3.6.1.4.1.6321.1.2.3.2.11.14.1 | OCTET STRING | read-write | Configure the target firmware version that will be upgraded. |
| INT fwUpgradeCheck | 1.3.6.1.4.1.6321.1.2.3.2.11.14.2 | INTEGER | read-write | Enable/disable firmware upgrade version checking feature. |
| STR fwUpgradeStatus | 1.3.6.1.4.1.6321.1.2.3.2.11.14.3 | DisplayString | read-only | Display current firmware upgrade status. |
| delayedReboot | 1.3.6.1.4.1.6321.1.2.3.2.11.15 | |||
| INT delayedRebootTimer | 1.3.6.1.4.1.6321.1.2.3.2.11.15.1 | INTEGER | read-write | 5~1800 secs, 0: reboot immediately. |
| INT delayedRebootRemainingTime | 1.3.6.1.4.1.6321.1.2.3.2.11.15.2 | INTEGER | read-only | Display the remaining time of scheduled reboot. |
| INT delayedRebootCancel | 1.3.6.1.4.1.6321.1.2.3.2.11.15.3 | INTEGER | read-write | cancel the scheduled reboot. |
| trap | 1.3.6.1.4.1.6321.1.2.3.2.12 | |||
| statistics | 1.3.6.1.4.1.6321.1.2.3.2.13 | |||
| C32 igmpQueryCntTotal | 1.3.6.1.4.1.6321.1.2.3.2.13.1 | Counter32 | read-only | The total number of IGMP query messages received. |
| C32 igmpReportCntTotal | 1.3.6.1.4.1.6321.1.2.3.2.13.2 | Counter32 | read-only | The total number of IGMP report messages received. |
| C32 igmpLeaveCntTotal | 1.3.6.1.4.1.6321.1.2.3.2.13.3 | Counter32 | read-only | The total number of IGMP leave messages received. |
| INT igmpNumOfActiveGroups | 1.3.6.1.4.1.6321.1.2.3.2.13.4 | INTEGER | read-only | The total number of IGMP learned groups. |
| igmpGroupTable | 1.3.6.1.4.1.6321.1.2.3.2.13.5 | not-accessible | This table includes igmp group information. | |
| igmpGroupEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1 | not-accessible | An entry in igmpGroupTable. | |
| IP igmpGroupIp | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1.1 | IpAddress | read-only | igmp group IP |
| INT igmpGroupvid | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1.2 | INTEGER | read-only | vlan id |
| INT igmpGroupnumberOfMembers | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1.3 | INTEGER | read-only | number Of Members |
| POR igmpGroupMemberPorts | 1.3.6.1.4.1.6321.1.2.3.2.13.5.1.4 | PortList | read-only | Group Member Ports |
| igmpGroupPortTable | 1.3.6.1.4.1.6321.1.2.3.2.13.6 | not-accessible | This table includes igmp Group port information. | |
| igmpGroupPortEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.6.1 | not-accessible | An entry in igmpGroupPortTable. | |
| IP igmpGroupPortIp | 1.3.6.1.4.1.6321.1.2.3.2.13.6.1.1 | IpAddress | read-only | Igmp Group IP |
| INT igmpGroupPortvid | 1.3.6.1.4.1.6321.1.2.3.2.13.6.1.2 | INTEGER | read-only | Igmp Group vid |
| igmpGroupV2Table | 1.3.6.1.4.1.6321.1.2.3.2.13.7 | not-accessible | A table that displays IGMP learned group member information. | |
| igmpGroupV2Entry | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1 | not-accessible | An entry of igmpGroupV2Table. | |
| VLA igmpGroupV2Vid | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1.1 | VlanIndex | read-only | The IGMP group VLAN ID. |
| IP igmpGroupV2Ip | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1.2 | IpAddress | read-only | The multicast IP address. |
| INT igmpGroupV2NumOfMembers | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1.3 | INTEGER | read-only | The number of member ports in the group. |
| POR igmpGroupV2MemberPorts | 1.3.6.1.4.1.6321.1.2.3.2.13.7.1.4 | PortList | read-only | The member port list of the group. |
| igmpGroupPortV2Table | 1.3.6.1.4.1.6321.1.2.3.2.13.8 | not-accessible | A table that displays IGMP joined groups in this port. | |
| igmpGroupPortV2Entry | 1.3.6.1.4.1.6321.1.2.3.2.13.8.1 | not-accessible | An entry of igmpGroupPortV2Table. | |
| VLA igmpGroupPortV2Vid | 1.3.6.1.4.1.6321.1.2.3.2.13.8.1.1 | VlanIndex | read-only | The IGMP group VLAN ID. |
| IP igmpGroupPortV2Ip | 1.3.6.1.4.1.6321.1.2.3.2.13.8.1.2 | IpAddress | read-only | The multicast IP address. |
| IP igmpGroupPortV2SourceIp | 1.3.6.1.4.1.6321.1.2.3.2.13.8.1.3 | IpAddress | read-only | The source IP address that joins the IGMP group. |
| igmpPortCtrlPduTable | 1.3.6.1.4.1.6321.1.2.3.2.13.9 | not-accessible | A table that displays IGMP related counter values in this port. | |
| igmpPortCtrlPduEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1 | not-accessible | An entry of igmpPortCtrlPduTable. | |
| C32 igmpPortCtrlPduQueryCnt | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.1 | Counter32 | read-only | The total number of IGMP query messages received in this port. |
| C32 igmpPortCtrlPduReportCnt | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.2 | Counter32 | read-only | The total number of IGMP report messages received in this port. |
| C32 igmpPortCtrlPduLeaveCnt | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.3 | Counter32 | read-only | The total number of IGMP leave messages received in this port. |
| INT igmpPortNumOfActiveGroups | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.4 | INTEGER | read-only | The total number of active IGMP groups in this port. |
| C32 igmpPortCtrlAuditLeaveCnt | 1.3.6.1.4.1.6321.1.2.3.2.13.9.1.5 | Counter32 | read-only | The total number of groups left by audit query. |
| dhcpStats | 1.3.6.1.4.1.6321.1.2.3.2.13.11 | |||
| dhcpSnoopIpTable | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1 | not-accessible | This table shows the IP addresses and netmasks offered by the DHCP server. | |
| dhcpSnoopIpEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1 | not-accessible | An entry of dhcpSnoopIpTable. | |
| IP dhcpSnoopIp | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.1 | IpAddress | read-only | The snooped IP address. |
| PHY dhcpSnoopMac | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.2 | PhysAddress | read-only | The snooped MAC address. |
| VLA dhcpSnoopVid | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.3 | VlanIndex | read-only | The snooped VLAN ID. |
| INT dhcpSnoopMask | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.4 | INTEGER | read-only | The snooped IP mask |
| IP dhcpSnoopGateway | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.5 | IpAddress | read-only | The snooped Gateway. |
| OCT dhcpSnoopRouteMap | 1.3.6.1.4.1.6321.1.2.3.2.13.11.1.1.6 | OCTET STRING | read-only | The refrence bit map of the dhcp route |
| dhcpSnoopCounterTable | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2 | not-accessible | This table shows the DHCP statistics. | |
| dhcpSnoopCounterEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1 | not-accessible | An entry of dhcpSnoopCounterTable. | |
| C64 dhcpDiscovery | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.1 | Counter64 | read-only | The total number of received DHCP server discovery packets. |
| C64 dhcpOffer | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.2 | Counter64 | read-only | The total number of received DHCP server offer packets. |
| C64 dhcpRequest | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.3 | Counter64 | read-only | The total number of received DHCP IP request packets. |
| C64 dhcpAck | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.4 | Counter64 | read-only | The total number of received DHCP IP acknowledge packets. |
| C64 dhcpAckBySnoopFull | 1.3.6.1.4.1.6321.1.2.3.2.13.11.2.1.5 | Counter64 | read-only | The total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full. |
| dhcpRouteTable | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3 | not-accessible | A table that contains dhcp route information. | |
| dhcpRouteEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1 | not-accessible | An entry of dhcpRouteTable. | |
| INT dhcpRouteIndex | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.1 | INTEGER | read-only | |
| VLA dhcpRouteVid | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.2 | VlanIndex | read-only | The VLAN-ID refering to this dhcp route. |
| IP dhcpRouteIP | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.3 | IpAddress | read-only | IP of this dhcp route |
| INT dhcpRouteMask | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.4 | INTEGER | read-only | The subnet mask of source IP mask. |
| IP dhcpRouteGwIP | 1.3.6.1.4.1.6321.1.2.3.2.13.11.3.1.5 | IpAddress | read-only | The gateway IP address. |
| paepvcStats | 1.3.6.1.4.1.6321.1.2.3.2.13.12 | |||
| paepvcSessionTable | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1 | not-accessible | This table shows the paepvc session statistics. | |
| paepvcSessionEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1 | not-accessible | An entry of paepvcSessionTable. | |
| INT paepvcSessionVpi | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.1 | INTEGER | read-only | The PAEPVC VPI. |
| INT paepvcSessionVci | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.2 | INTEGER | read-only | The PAEPVC VCI. |
| INT paepvcSessionState | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.3 | INTEGER | read-only | The PAEPVC status. |
| INT paepvcSessionId | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.4 | INTEGER | read-only | The PAEPVC session ID. |
| U32 paepvcSessionUptime | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.5 | Unsigned32 | read-only | The PAEPVC session uptime. |
| STR paepvcSessionacname | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.6 | DisplayString | read-only | Access concentrator name. |
| STR paepvcSessionsrvcname | 1.3.6.1.4.1.6321.1.2.3.2.13.12.1.1.7 | DisplayString | read-only | Service name. |
| paepvcCountTable | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2 | not-accessible | This table shows the paepvc counters. | |
| paepvcCountEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1 | not-accessible | An entry of paepvcCountTable. | |
| INT paepvcCountVpi | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.1 | INTEGER | read-only | The PAEPVC VPI. |
| INT paepvcCountVci | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.2 | INTEGER | read-only | The PAEPVC VCI. |
| U32 paepvcCountPppLcpCfgReqRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.3 | Unsigned32 | read-only | The number of ppp lcp config-request received. |
| U32 paepvcCountPppLcpEchoReqRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.4 | Unsigned32 | read-only | The number of ppp lcp echo-request received. |
| U32 paepvcCountPppLcpEchoReplyRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.5 | Unsigned32 | read-only | The number of ppp lcp echo-reply received. |
| U32 paepvcCountPadiTx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.6 | Unsigned32 | read-only | The number of pppoe padi transfered |
| U32 paepvcCountPadoRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.7 | Unsigned32 | read-only | The number of pppoe pado received |
| U32 paepvcCountPadrTx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.8 | Unsigned32 | read-only | The number of pppoe padr transfered |
| U32 paepvcCountPadsRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.9 | Unsigned32 | read-only | The number of pppoe pads received |
| U32 paepvcCountPadtTx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.10 | Unsigned32 | read-only | The number of pppoe padt transfered |
| U32 paepvcCountPadtRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.11 | Unsigned32 | read-only | The number of pppoe padt received |
| U32 paepvcCountSrvcnameErrRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.12 | Unsigned32 | read-only | The number of pppoe service name error received |
| U32 paepvcCountAcSystemErrRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.13 | Unsigned32 | read-only | The number of pppoe access concentrator name error received |
| U32 paepvcCountGenericErrTx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.14 | Unsigned32 | read-only | The number of pppoe generic error transfered |
| U32 paepvcCountGenericErrRx | 1.3.6.1.4.1.6321.1.2.3.2.13.12.2.1.15 | Unsigned32 | read-only | The number of pppoe generic error received |
| macStats | 1.3.6.1.4.1.6321.1.2.3.2.13.13 | |||
| INT macDisplayTarget | 1.3.6.1.4.1.6321.1.2.3.2.13.13.1 | INTEGER | read-write | This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the system 98: all subscriber ports 97: all Ethernet ports IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50). |
| macTable | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2 | not-accessible | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | |
| macEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2.1 | not-accessible | An entry of macTable. | |
| MAC macAddress | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2.1.1 | MacAddress | read-only | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| INT macPort | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2.1.2 | INTEGER | read-only | The port from which the mac address has been learned. |
| INT macStatus | 1.3.6.1.4.1.6321.1.2.3.2.13.13.2.1.3 | INTEGER | read-only | The status of this entry. |
| ipbpvcStats | 1.3.6.1.4.1.6321.1.2.3.2.13.14 | |||
| arpproxyTable | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1 | not-accessible | Display ARP table. This table is supported by R3.00 and later versions. | |
| arpproxyEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1 | not-accessible | An entry of arpproxyTable. | |
| IP arpproxyIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.1 | IpAddress | read-only | |
| MAC arpproxyMac | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.2 | MacAddress | read-only | |
| INT arpproxyIfIndex | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.3 | INTEGER | read-only | |
| INT arpproxyVpi | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.4 | INTEGER | read-only | |
| INT arpproxyVci | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.5 | INTEGER | read-only | |
| IP arpproxyInterfaceIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.6 | IpAddress | read-only | |
| INT arpproxyInterfaceMask | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.7 | INTEGER | read-only | |
| VLA arpproxyInterfaceVid | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.8 | VlanIndex | read-only | |
| INT arpproxyDhcpIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.9 | INTEGER | read-only | |
| INT arpproxyType | 1.3.6.1.4.1.6321.1.2.3.2.13.14.1.1.10 | INTEGER | read-only | |
| ipbpvcIfDynamicTable | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2 | not-accessible | Display runtime interfaces. This table is supported by R3.00 and later versions. | |
| ipbpvcIfDynamicEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1 | not-accessible | An entry of ipbpvcIfDynamicTable. | |
| IP ipbpvcIfDynamicIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.1 | IpAddress | read-only | |
| INT ipbpvcIfDynamicMask | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.2 | INTEGER | read-only | |
| INT ipbpvcIfDynamicIfIndex | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.3 | INTEGER | read-only | |
| INT ipbpvcIfDynamicVpi | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.4 | INTEGER | read-only | |
| INT ipbpvcIfDynamicVci | 1.3.6.1.4.1.6321.1.2.3.2.13.14.2.1.5 | INTEGER | read-only | |
| ipbpvcRouteDynamicTable | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3 | not-accessible | Display runtime routing table. This table is supported by R3.00 and later versions. | |
| ipbpvcRouteDynamicEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1 | not-accessible | An entry of ipbpvcRouteDynamicTable. | |
| INT ipbpvcRouteDynamicType | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.1 | INTEGER | read-only | |
| IP ipbpvcRouteDynamicIp | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.2 | IpAddress | read-only | |
| INT ipbpvcRouteDynamicMask | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.3 | INTEGER | read-only | |
| IP ipbpvcRouteDynamicNextHop | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.4 | IpAddress | read-only | |
| INT ipbpvcRouteDynamicMetric | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.5 | INTEGER | read-only | |
| INT ipbpvcRouteDynamicPriority | 1.3.6.1.4.1.6321.1.2.3.2.13.14.3.1.6 | INTEGER | read-only | |
| voipStats | 1.3.6.1.4.1.6321.1.2.3.2.13.15 | |||
| voipLineStatusTable | 1.3.6.1.4.1.6321.1.2.3.2.13.15.1 | not-accessible | The table displays VoIP line status. | |
| voipLineStatusEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.15.1.1 | not-accessible | An entry of voipLineStatusTable. | |
| INT voipLineStatusPhoneStatus | 1.3.6.1.4.1.6321.1.2.3.2.13.15.1.1.1 | INTEGER | read-only | Phone status of the line. |
| INT voipLineStatusServiceStatus | 1.3.6.1.4.1.6321.1.2.3.2.13.15.1.1.2 | INTEGER | read-only | Service status of the line. |
| voipLineInfoTable | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2 | not-accessible | The table displays VoIP line information. | |
| voipLineInfoEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1 | not-accessible | An entry of voipLineInfoTable. | |
| OCT voipLineInfoSipLocalUri | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.1 | OCTET STRING | read-only | |
| OCT voipLineInfoSipRemoteUri | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.2 | OCTET STRING | read-only | |
| OCT voipLineInfoRtpTxCodecType | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.3 | OCTET STRING | read-only | |
| OCT voipLineInfoRtpRxCodecType | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.4 | OCTET STRING | read-only | |
| INT voipLineInfoRtpTxPt | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.5 | INTEGER | read-only | |
| INT voipLineInfoRtpRxPt | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.6 | INTEGER | read-only | |
| IP voipLineInfoRtpLocalIp | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.7 | IpAddress | read-only | |
| IP voipLineInfoRtpRemoteIp | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.8 | IpAddress | read-only | |
| INT voipLineInfoRtpLocalPort | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.9 | INTEGER | read-only | |
| INT voipLineInfoRtpRemotePort | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.10 | INTEGER | read-only | |
| OCT voipLineInfoSipLocalUri2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.11 | OCTET STRING | read-only | |
| OCT voipLineInfoSipRemoteUri2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.12 | OCTET STRING | read-only | |
| OCT voipLineInfoRtpTxCodecType2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.13 | OCTET STRING | read-only | |
| OCT voipLineInfoRtpRxCodecType2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.14 | OCTET STRING | read-only | |
| INT voipLineInfoRtpTxPt2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.15 | INTEGER | read-only | |
| INT voipLineInfoRtpRxPt2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.16 | INTEGER | read-only | |
| IP voipLineInfoRtpLocalIp2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.17 | IpAddress | read-only | |
| IP voipLineInfoRtpRemoteIp2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.18 | IpAddress | read-only | |
| INT voipLineInfoRtpLocalPort2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.19 | INTEGER | read-only | |
| INT voipLineInfoRtpRemotePort2 | 1.3.6.1.4.1.6321.1.2.3.2.13.15.2.1.20 | INTEGER | read-only | |
| voipH248Status | 1.3.6.1.4.1.6321.1.2.3.2.13.15.3 | |||
| OCT voipH248StatusMgName | 1.3.6.1.4.1.6321.1.2.3.2.13.15.3.1 | OCTET STRING | read-only | MG name. |
| INT voipH248StatusMgStatus | 1.3.6.1.4.1.6321.1.2.3.2.13.15.3.2 | INTEGER | read-only | Mg connection status. |
| voipActiveCallStat | 1.3.6.1.4.1.6321.1.2.3.2.13.15.4 | |||
| INT voipActiveCallStatCurrentActiveCalls | 1.3.6.1.4.1.6321.1.2.3.2.13.15.4.1 | INTEGER | read-only | Number of current active calls. |
| INT voipActiveCallStatFailAttempts | 1.3.6.1.4.1.6321.1.2.3.2.13.15.4.2 | INTEGER | read-only | Failed attempts to setup active call. |
| macffStats | 1.3.6.1.4.1.6321.1.2.3.2.13.16 | |||
| macFfStatsTable | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1 | not-accessible | A table that contains MAC Force Forwarding static configuration and dynamic information. | |
| macFfStatsEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1 | not-accessible | An entry of macFfStatsTable. | |
| INT macFfStatsIndex | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.1 | INTEGER | read-only | Index of the MACFF. |
| VLA macFfStatsVid | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.2 | VlanIndex | read-only | The VLAN-ID refering to this AR/AS. |
| IP macFfStatsArIP | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.3 | IpAddress | read-only | IP of this AR/AS |
| IP macFfStatsSrcIP | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.4 | IpAddress | read-only | The source IP address of the MACFF. |
| INT macFfStatsSrcMask | 1.3.6.1.4.1.6321.1.2.3.2.13.16.1.1.5 | INTEGER | read-only | The subnet mask of source IP mask. |
| macFfArpTable | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2 | not-accessible | A table that contains MAC Force Forwarding ARP information. | |
| macFfArpEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1 | not-accessible | An entry of macFfArpTable. | |
| VLA macFfArpVid | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1.1 | VlanIndex | read-only | The VLAN-ID refering to this AR/AS. |
| IP macFfArpIP | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1.2 | IpAddress | read-only | IP of this AR/AS. |
| INT macFfArpPort | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1.3 | INTEGER | read-only | Port of this AR/AS. |
| PHY macFfArpMac | 1.3.6.1.4.1.6321.1.2.3.2.13.16.2.1.4 | PhysAddress | read-only | MAC address of the AR or AS. |
| macFfArpCounterTable | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3 | not-accessible | A table that contains MAC Force Forwarding ARP counter information. | |
| macFfArpCounterEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1 | not-accessible | An entry of macFfArpCounterTable. | |
| C32 macFfArpCounterRequestTX | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.1 | Counter32 | read-only | ARP Request TX counter. |
| C32 macFfArpCounterRequestRX | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.2 | Counter32 | read-only | ARP Request RX counter. |
| C32 macFfArpCounterRequestRXDrop | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.3 | Counter32 | read-only | ARP Request RX drop counter. |
| C32 macFfArpCounterReplyTX | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.4 | Counter32 | read-only | ARP Reply TX counter. |
| C32 macFfArpCounterReplyRX | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.5 | Counter32 | read-only | ARP Reply RX counter. |
| C32 macFfArpCounterReplyRXDrop | 1.3.6.1.4.1.6321.1.2.3.2.13.16.3.1.6 | Counter32 | read-only | ARP Reply RX drop counter. |
| enetStats | 1.3.6.1.4.1.6321.1.2.3.2.13.17 | |||
| enetSfpInfoTable | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2 | not-accessible | This table includes sfp info of enet port. | |
| enetSfpInfoEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1 | not-accessible | An entry in enetSfpInfoTable. | |
| INT enetSfpInfoTxpower | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.1 | INTEGER | read-only | Measured Tx Output Power. |
| INT enetSfpInfoRxpower | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.2 | INTEGER | read-only | Measured Rx Output Power. |
| INT enetSfpInfoTemperature | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.3 | INTEGER | read-only | Measured temperature. |
| INT enetSfpInfoTxBias | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.4 | INTEGER | read-only | Measured tx bias. |
| INT enetSfpInfoVoltage | 1.3.6.1.4.1.6321.1.2.3.2.13.17.2.1.5 | INTEGER | read-only | Measured voltage. |
| adslStats | 1.3.6.1.4.1.6321.1.2.3.2.13.18 | |||
| adslPortUtilTable | 1.3.6.1.4.1.6321.1.2.3.2.13.18.1 | not-accessible | This table includes adsl port utilization. | |
| adslPortUtilEntry | 1.3.6.1.4.1.6321.1.2.3.2.13.18.1.1 | not-accessible | An entry in adslPortUtilEntry. | |
| INT adslPortUtilTx | 1.3.6.1.4.1.6321.1.2.3.2.13.18.1.1.1 | INTEGER | read-only | Measure adsl port's tx utilization. |
| INT adslPortUtilRx | 1.3.6.1.4.1.6321.1.2.3.2.13.18.1.1.2 | INTEGER | read-only | Measure adsl port's rx utilization. |
| clear | 1.3.6.1.4.1.6321.1.2.3.2.14 | |||
| OCT counterClearTarget | 1.3.6.1.4.1.6321.1.2.3.2.14.1 | OCTET STRING | read-write | This managed object is used for identify the target on which the counter would be cleared. The target is encoded as: Byte 1: reserved Byte 2~3: reserved Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| INT counterClearOps | 1.3.6.1.4.1.6321.1.2.3.2.14.2 | INTEGER | read-write | The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3: clear port ATM counters BIT 4: clear pvc ATM counters BIT 5: clear DHCP counters BIT 6: clear IGMP counters BIT 7: clear IGMP port counters BIT 8: clear MACFF ARP counters BIT 9: clear current lineperf BIT 10: clear current 15 minute lineperf BIT 11: clear current 1 day lineperf |
| INT counterClearVpi | 1.3.6.1.4.1.6321.1.2.3.2.14.3 | INTEGER | read-write | VPI of the pvc whose counters would be cleared. |
| INT counterClearVci | 1.3.6.1.4.1.6321.1.2.3.2.14.4 | INTEGER | read-write | VCI of the pvc whose counters would be cleared. |
| voip | 1.3.6.1.4.1.6321.1.2.3.2.16 | |||
| voipArp | 1.3.6.1.4.1.6321.1.2.3.2.16.1 | |||
| INT voipArpFlushOps | 1.3.6.1.4.1.6321.1.2.3.2.16.1.1 | INTEGER | read-write | Set the object to 1 to start flushing. |
| voipArpShowTable | 1.3.6.1.4.1.6321.1.2.3.2.16.1.2 | not-accessible | Display ARP entries learnt in specified slot. | |
| voipArpShowEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.1.2.1 | not-accessible | An entry of voipArpShowTable. | |
| IP voipArpShowIp | 1.3.6.1.4.1.6321.1.2.3.2.16.1.2.1.1 | IpAddress | read-only | |
| PHY voipArpShowMac | 1.3.6.1.4.1.6321.1.2.3.2.16.1.2.1.2 | PhysAddress | read-only | |
| voipSip | 1.3.6.1.4.1.6321.1.2.3.2.16.2 | |||
| INT maxNumOfVoipNumberPlan | 1.3.6.1.4.1.6321.1.2.3.2.16.2.1 | INTEGER | read-only | The maximum number of VoIP number plan supported by the system. |
| voipNumberPlanTable | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2 | not-accessible | Configure numbering plan entry of specified index in specified payphone charging table. | |
| voipNumberPlanEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1 | not-accessible | An entry of voipNumberPlanTable. | |
| STR voipNumberPlanName | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.1 | DisplayString | read-only | Numbering plan table name. |
| INT voipNumberPlanIndex | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.2 | INTEGER | read-only | |
| OCT voipNumberPlanPattern | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.3 | OCTET STRING | read-create | Allowed characters are 0~9, *, T, S, P, x, ., | and range format characters that include '~', ',' and parenthesis '(', ')', brackets '[', ']', braces '{', '}' and at most one parenthesis pair are allowed, Examples: '002(*)', '0(*)', and '(*)'. '*' represents one or more digit characters 'x' represents any digit character 'T' timeout send of dial string, can only appear at the end of pattern 'S' star phone key (*) match character in dial plan 'P' pound key (#) match character in dial plan '.' represents zero or more repetitions of character or range that precedes it, can't use the dot character '.' in brackets '|' used to separate multiple number plan patterns [n~m,k] match a range of digits n~m or a specified digit k, '[' and ']' must pair and nest brackets is illegal '~' and ',' are allowed showing in brackets only '~' connected characters must be digit {n} match n digits |
| OCT voipNumberPlanRule | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.4 | OCTET STRING | read-create | Allowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesis pair, '\n' stand for no local disconnect '\p' stand for partial pattern '\t' stand for confirmation tone play '\tr' stand for recall dial tone play 'deny' stand for the pattern specified is not allowed. Examples: '\1', '\c\1', and '\c\d\1'. |
| ROW voipNumberPlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.16.2.2.1.5 | RowStatus | read-create | This object is used to create a new entry or delete an existing entry in this table. |
| voipNumberPlanDftTable | 1.3.6.1.4.1.6321.1.2.3.2.16.2.3 | not-accessible | Configure the action rule after inter-digit timeout in specified entry of numbering plan table. | |
| voipNumberPlanDftEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.2.3.1 | not-accessible | An entry of voipNumberDftPlanTable. | |
| OCT voipNumberPlanDftRule | 1.3.6.1.4.1.6321.1.2.3.2.16.2.3.1.1 | OCTET STRING | read-create | Allowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesis pair, '\n' stand for no local disconnect '\p' stand for partial pattern '\t' stand for confirmation tone play 'deny' stand for the pattern specified is not allowed. Examples: '\1', '\c\1', and '\c\d\1'. |
| digitSetup | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4 | |||
| timeoutSetup | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1 | |||
| INT initialTimeout | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1.1 | INTEGER | read-write | First digit must be dialed before this timeout, 1 ~ 20 seconds. |
| INT interDigitTimeout | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1.2 | INTEGER | read-write | If no pattern string is fully matched, the inter-digit timeout will trigger device to send out current dialed digits, 1 ~ 20 seconds. |
| INT digitPauseTimeout | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1.3 | INTEGER | read-write | If a pattern string is end with the T pattern, the pattern string will not be matched until the timeout happens, 1 ~ 20 seconds. |
| INT matchingTimeout | 1.3.6.1.4.1.6321.1.2.3.2.16.2.4.1.4 | INTEGER | read-write | If a pattern string is fully matched, and there are other pattern strings partially matched, the pattern string will be sent out if the timeout happens, 1 ~ 20 seconds. |
| voipIp | 1.3.6.1.4.1.6321.1.2.3.2.16.3 | |||
| IP voipIpSetIp | 1.3.6.1.4.1.6321.1.2.3.2.16.3.1 | IpAddress | read-write | VoIP's IP address. |
| VLA voipIpSetVid | 1.3.6.1.4.1.6321.1.2.3.2.16.3.2 | VlanIndex | read-write | VoIP's VLAN ID. |
| INT voipIpSetMask | 1.3.6.1.4.1.6321.1.2.3.2.16.3.3 | INTEGER | read-write | VoIP's network mask. |
| voipDns | 1.3.6.1.4.1.6321.1.2.3.2.16.4 | |||
| IP voipDnsIp | 1.3.6.1.4.1.6321.1.2.3.2.16.4.1 | IpAddress | read-write | IP address. |
| INT maxNumOfVoipRoute | 1.3.6.1.4.1.6321.1.2.3.2.16.7 | INTEGER | read-only | The maximum number of VoIP routing entries. |
| voipRouteTable | 1.3.6.1.4.1.6321.1.2.3.2.16.8 | not-accessible | ||
| voipRouteEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1 | not-accessible | An entry of voipRouteTable. | |
| IP voipRouteIp | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.1 | IpAddress | read-only | IP address. |
| IP voipRouteGateway | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.2 | IpAddress | read-only | Gateway IP. |
| INT voipRouteMask | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.3 | INTEGER | read-only | Network mask. |
| INT voipRouteMetric | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.4 | INTEGER | read-create | Metric number of the route. |
| ROW voipRouteRowStatus | 1.3.6.1.4.1.6321.1.2.3.2.16.8.1.5 | RowStatus | read-create | This object is used to create a new entry or delete an existing entry in this table. |
| INT voipCountryCode | 1.3.6.1.4.1.6321.1.2.3.2.16.9 | INTEGER | read-write | Configure country (information) for VoIP services. |
| voipH248 | 1.3.6.1.4.1.6321.1.2.3.2.16.10 | |||
| INT maxNumOfVoipH248MgConf | 1.3.6.1.4.1.6321.1.2.3.2.16.10.1 | INTEGER | read-only | The maximum number of virtual media gateway supported by the system. |
| voipH248MgConf | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2 | |||
| STR voipH248MgName | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2.1 | DisplayString | read-write | MG name. |
| INT voipH248MgEnable | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2.2 | INTEGER | read-write | Enable/disable MG. |
| STR voipH248MgH248Profile | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2.3 | DisplayString | read-write | H248 profile name used by MG. |
| INT voipH248MgPort | 1.3.6.1.4.1.6321.1.2.3.2.16.10.2.4 | INTEGER | read-write | Port number used by MG. |
| voipRing | 1.3.6.1.4.1.6321.1.2.3.2.16.11 | |||
| voipRingTable | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1 | not-accessible | ||
| voipRingEntry | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1 | not-accessible | An entry of voipRouteTable. | |
| INT voipRingIndex | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.1 | INTEGER | read-only | |
| STR voipRingName | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.2 | DisplayString | read-create | Ring identifier used in SIP Alert-Info header field |
| INT voipRingOn1 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.3 | INTEGER | read-create | first on time in milliseconds |
| INT voipRingOff1 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.4 | INTEGER | read-create | first off time in milliseconds |
| INT voipRingOn2 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.5 | INTEGER | read-create | second on time in milliseconds |
| INT voipRingOff2 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.6 | INTEGER | read-create | second off time in milliseconds |
| INT voipRingOn3 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.7 | INTEGER | read-create | third on time in milliseconds |
| INT voipRingOff3 | 1.3.6.1.4.1.6321.1.2.3.2.16.11.1.1.8 | INTEGER | read-create | third off time in milliseconds |
| INT voipRingSetDefault | 1.3.6.1.4.1.6321.1.2.3.2.16.11.2 | INTEGER | read-write | Set the index to default value. |
| INT voipBootRegDelay | 1.3.6.1.4.1.6321.1.2.3.2.16.12 | INTEGER | read-write | Registration delay in seconds. |
| voipActiveCall | 1.3.6.1.4.1.6321.1.2.3.2.16.13 | |||
| INT voipActiveCallMaxActiveCalls | 1.3.6.1.4.1.6321.1.2.3.2.16.13.1 | INTEGER | read-write | Configure maximum number of concurrent active calls, 0~96. |
| INT voipActiveCallThreshold | 1.3.6.1.4.1.6321.1.2.3.2.16.13.2 | INTEGER | read-write | The threshold to report or clear alarm, 50~100. |
| INT voipMode | 1.3.6.1.4.1.6321.1.2.3.2.16.100 | INTEGER | read-write | Configure the Mode for VoIP Service. |
| aesSeriesCommon | 1.3.6.1.4.1.6321.1.2.3.2.97 | |||
| iesSeriesCommon | 1.3.6.1.4.1.6321.1.2.3.2.98 | |||
| accessSwitchCommonATM | 1.3.6.1.4.1.6321.1.2.3.2.99 |
RFC description
Vendor-private MIB for Nokia/Alcatel E5-111 telecommunications equipment, defining managed objects for system configuration, performance monitoring, and alarms.
Start monitoring Calix E5 multi-service access platform (E5-111) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.