FASTPATH-RADIUS-AUTH-CLIENT-MIB

All MIBs › FASTPATH-RADIUS-AUTH-CLIENT-MIB

Organization: Broadcom Corporation

Last Updated: 2007-05-23

Category: Protocol: RADIUS, RADIUS and AAA, Vendor: Broadcom

Description: Broadcom FastPath private MIB for RADIUS authentication client configuration and statistics on FastPath-based network switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FASTPATH-RADIUS-AUTH-CLIENT-MIB?

FASTPATH-RADIUS-AUTH-CLIENT-MIB is a Broadcom private MIB for switches built on the Broadcom FastPath switch software/firmware, covering the configuration and statistics of the device's RADIUS authentication client used for 802.1X or management authentication against external RADIUS servers. Based on its short description, it exposes RADIUS-client configuration (server addresses, shared secrets/timeouts) and statistics such as authentication request/response/timeout counters, i.e., authentication-service status data rather than physical hardware sensors. Its monitoring relevance is chiefly software/service health: rising RADIUS timeout or failed-authentication counters would reveal degraded connectivity to the RADIUS server(s), which can block user or admin authentication entirely. It naturally depends on the client-side semantics defined in the standard RADIUS Authentication Client MIB (RFC 2618) that it customizes/extends for FastPath-based devices. No module description text or sample object names were available in the extracted source for this batch, so its exact table/object naming could not be confirmed here. It is typically deployed on Broadcom FastPath-based enterprise switches performing 802.1X port authentication or admin-login RADIUS authentication. Engineers can download the FASTPATH-RADIUS-AUTH-CLIENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FASTPATH-RADIUS-AUTH-CLIENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Broadcom FastPath-based enterprise switch

Monitoring Examples

Concrete object names were not available in the extracted source, so a specific OID-level example cannot be given without inventing names. In typical use, an administrator would poll RADIUS-client statistics for authentication request counts, timeouts, and failed-response counts per configured RADIUS server, and a spike in timeout counters for a given server would reveal that server has become unreachable, risking authentication failures for users or administrators.

What Can Be Monitored

RADIUS server configuration
authentication request count
authentication timeout count
authentication failure count

Imported Objects

From BROADCOM-REF-MIB

fastPath

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathRadius	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8			The Broadcom Private MIB for FastPath Radius Authentication Client
agentRadiusConfigGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1
U32 agentRadiusRetransmit	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.1	Unsigned32	read-write	Maximum number of retransmissions of a RADIUS request packet
U32 agentRadiusTimeout	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.2	Unsigned32	read-write	Time out duration (in seconds) before packets are retransmitted
U32 agentRadiusDeadTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.3	Unsigned32	read-write	Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests.
STR agentRadiusServerKey	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.4	DisplayString	read-write	RADIUS Server key specifies the authentication and encryption key for all RADIUS communications between the switch and the RADIUS server. This key must match the encryption used on the RADIUS daemon.
IP agentRadiusSourceIPAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.5	IpAddress	read-write	Source IP address that will be used for the communication with RADIUS servers.
I32 agentRadiusServerIndexNextValid	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.6	Integer32	read-only	Indicates the next valid index into the agentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusServerConfigTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7		not-accessible	Table with information about Radius Authentication Server IP Addresses, port numbers and shared secret
agentRadiusServerConfigEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1		not-accessible	Entry consisting of configuration data for a Radius Authentication Server.
I32 agentRadiusServerIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.1	Integer32	not-accessible	Unique index of the configured RADIUS server
IP agentRadiusServerAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.2	InetAddress	read-create	IP Address of the configured RADIUS server. This object cannot be changed after creation.
U32 agentRadiusServerPort	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.3	Unsigned32	read-write	Port number for the RADIUS server.
U32 agentRadiusServerTimeout	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.4	Unsigned32	read-write	Time out duration (in seconds) before packets are retransmitted
U32 agentRadiusServerRetransmit	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.5	Unsigned32	read-write	Maximum number of retransmissions of a RADIUS request packet
U32 agentRadiusServerDeadtime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.6	Unsigned32	read-write	Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests.
IP agentRadiusServerSourceIPAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.7	IpAddress	read-write	Source IP address that will be used for the communication with RADIUS servers.
STR agentRadiusServerSecret	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.8	DisplayString	read-write	Configured shared sercret for the RADIUS server.
U32 agentRadiusServerPriority	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.9	Unsigned32	read-write	Priority specifies the order in which the servers will be used, where 0 is the highest priority in radius server config mode.
INT agentRadiusServerUsageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.10	INTEGER	read-write	Specify the usage type of the server.
ROW agentRadiusServerAddressRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.11	RowStatus	read-create	Creates or destroys a RADIUS Authentication server entry. During creation, the next available index is specified by the agentRadiusServerIndexNextValid object. Rows creation using a different value for agentRadiusServerIndex will fail. active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry.
INT agentRadiusServerPrimaryMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.12	INTEGER	read-write	Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set Primary.
INT agentRadiusServerCurrentMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.13	INTEGER	read-only	Indicate if the RADIUS server is the current server in user for authentication.
INT agentRadiusServerMsgAuth	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.14	INTEGER	read-write	Enable or disable the message authenticator attribute for this RADIUS server.
STR agentRadiusServerName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.15	DisplayString	read-create	Configured identification name for the RADIUS server.
IP agentRadiusServerInetAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.16	InetAddress	read-create	IP Address of the configured RADIUS server. This object cannot be changed after creation.
IPt agentRadiusServerAddressType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.7.1.17	InetAddressType	read-create	IP Address Type of the configured RADIUS server. This object cannot be changed after creation.
IP agentRadiusNasIpAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.8	IpAddress	read-write	Used to set the NAS-IP address for the radius server.
INT agentAuthorizationNetworkRadiusMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.9	INTEGER	read-write	Used to enable/disable Vlan assignment mode.
I32 agentRadiusAccountingIndexNextValid	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.10	Integer32	read-only	Indicates the next valid index into the agentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0.
agentRadiusAccountingConfigTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11		not-accessible	Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
agentRadiusAccountingConfigEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11.1		not-accessible	Entry consisting of configuration data for a Radius Accounting Server.
I32 agentRadiusAccountingServerIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11.1.1	Integer32	not-accessible	Unique index of the configured RADIUS accounting server. The next valid value of this object for creation is specified by agentRadiusAccountingIndexNextValid.
IP agentRadiusAccountingServerAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11.1.2	InetAddress	read-create	IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
IPt agentRadiusAccountingServerAddressType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11.1.3	InetAddressType	read-create	IP Address Type of the configured RADIUS accounting server. This object cannot be changed after creation.
U32 agentRadiusAccountingPort	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11.1.4	Unsigned32	read-write	Port number for the RADIUS accounting server.
STR agentRadiusAccountingSecret	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11.1.5	DisplayString	read-write	Configured shared sercret for the RADIUS accounting server.
ROW agentRadiusAccountingStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11.1.6	RowStatus	read-create	Creates or destroys a RADIUS accounting server entry. During creation, the next available index is specified by the agentRadiusAccountingIndexNextValid object. Rows creation using a different value for agentRadiusAccountingServerIndex will fail. active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry.
STR agentRadiusAccountingServerName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.11.1.7	DisplayString	read-create	Configured identification name for the RADIUS Accounting server.
INT agentRadiusAccountingMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.12	INTEGER	read-write	Identifies if RADIUS Accounting has been enabled or not
INT agentRadiusStatsClear	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.13	INTEGER	read-write	When set to enable(1), all Radius statistics will be reset.
U32 agentRadiusAuthenticationServers	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.14	Unsigned32	read-only	Number of RADIUS Authentication Servers that have been configured.
U32 agentRadiusAccountingServers	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.15	Unsigned32	read-only	Number of RADIUS Accounting Servers that have been configured.
U32 agentRadiusNamedAuthenticationServerGroups	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.16	Unsigned32	read-only	Number of configured RADIUS named Authentication Server groups.
U32 agentRadiusNamedAccountingServerGroups	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.8.1.17	Unsigned32	read-only	Number of configured RADIUS named Accounting Server groups.

RFC description

Broadcom FastPath RADIUS authentication client MIB for managing authentication server configuration and statistics.

Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (RADIUS authentication client) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FASTPATH-RADIUS-AUTH-CLIENT-MIB

What Is FASTPATH-RADIUS-AUTH-CLIENT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description