A3COM-HUAWEI-RADIUS-MIB

All MIBs › A3COM-HUAWEI-RADIUS-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2010-08-26

Category: RADIUS and AAA, Vendor: H3C/HH3C

Description: Manages RADIUS authentication and accounting client configuration on H3C/3Com devices, including server settings, key configuration, and per-server statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-RADIUS-MIB?

A3COM-HUAWEI-RADIUS-MIB is an H3C/3Com private MIB for managing and monitoring the RADIUS authentication and accounting client feature on network devices, covering server configuration and per-server operational statistics. It exposes counters for accounting requests and acknowledgments, logout requests and acknowledgments, and a timestamp of the first trap generated by a given RADIUS server. Its monitoring focus is software/service health: administrators use it to confirm RADIUS servers are responding to accounting traffic and to detect a server that has stopped acknowledging requests, which would leave accounting records unrecorded or authentication delayed. It depends conceptually on the standard RADIUS protocol (RFC 2865/2866) client behavior being implemented on the device, though the MIB itself is vendor-private. It is deployed on H3C/3Com switches and routers acting as RADIUS clients for centralized AAA in enterprise network access control, where A3COM-HUAWEI-RADIUS-MIB SNMP monitoring helps confirm RADIUS servers remain responsive.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-RADIUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/3Com switches and routers (RADIUS clients)

Monitoring Examples

An operator checks h3cRadiusStatAccReq against h3cRadiusStatAccAck to compute an accounting acknowledgment ratio, and a growing gap indicates a RADIUS server that is silently dropping accounting packets. h3cRadiusStatLogoutReq versus h3cRadiusStatLogoutAck can similarly reveal missed session-termination accounting. h3cRadiusServerFirstTrapTime under h3cRadiusServerTrapVarObjects helps correlate the onset of RADIUS server problems with other events in the monitoring timeline, drawing on the h3cRadiusStatistic subtree for the underlying counters.

What Can Be Monitored

accounting request/acknowledgment counts
logout request/acknowledgment counts
RADIUS server responsiveness
first-trap timestamp per server

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RADIUS-ACC-CLIENT-MIB

radiusAccClientServerPortNumber	OBJECT-TYPE
radiusAccServerAddress	OBJECT-TYPE
radiusAccServerIndex	OBJECT-TYPE

From RADIUS-AUTH-CLIENT-MIB

radiusAuthClientServerPortNumber	OBJECT-TYPE
radiusAuthServerAddress	OBJECT-TYPE
radiusAuthServerIndex	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using h3cRadiusStatAccReq OID:

Select an H3C/3Com switch or router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cRadiusStatAccReq into the Find box to locate it in the OID tree, then select it and click OK. It shows the number of radius account request to the radius server. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cRadius	1.3.6.1.4.1.43.45.1.10.2.13			The A3COM-HUAWEI-RADIUS-MIB contains objects to Manage configuration and Monitor running state for RADIUS feature.
h3cRadiusAccClient	1.3.6.1.4.1.43.45.1.10.2.13.2.1
C32 h3cRadiusAccClientInterimRequests	1.3.6.1.4.1.43.45.1.10.2.13.2.1.1.1.3	Counter32	read-only	The number of RADIUS interim accounting request sent to this server.
C32 h3cRadiusAccClientInterimResponses	1.3.6.1.4.1.43.45.1.10.2.13.2.1.1.1.4	Counter32	read-only	The number of RADIUS interim accounting response received from this server.
C32 h3cRadiusAccClientStartRequests	1.3.6.1.4.1.43.45.1.10.2.13.2.1.1.1.1	Counter32	read-only	The number of RADIUS accounting start request sent to this server.
C32 h3cRadiusAccClientStartResponses	1.3.6.1.4.1.43.45.1.10.2.13.2.1.1.1.2	Counter32	read-only	The number of RADIUS accounting start response received from this server.
C32 h3cRadiusAccClientStopRequests	1.3.6.1.4.1.43.45.1.10.2.13.2.1.1.1.5	Counter32	read-only	The number of RADIUS stop accounting request sent to this RADIUS server.
C32 h3cRadiusAccClientStopResponses	1.3.6.1.4.1.43.45.1.10.2.13.2.1.1.1.6	Counter32	read-only	The number of RADIUS stop accounting response received from this server.
h3cRadiusAccounting	1.3.6.1.4.1.43.45.1.10.2.13.2
NTF h3cRadiusAccServerDownTrap	1.3.6.1.4.1.43.45.1.10.2.13.3.2			This trap is generated when the accounting RADIUS server doesn't respond client's requests for specified times.
h3cRadiusAccServerEntry	1.3.6.1.4.1.43.45.1.10.2.13.2.1.1.1		not-accessible	An entry (conceptual row) representing a RADIUS accounting server with which a client shares a secret.
h3cRadiusAccServerTable	1.3.6.1.4.1.43.45.1.10.2.13.2.1.1		not-accessible	The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
NTF h3cRadiusAccServerUpTrap	1.3.6.1.4.1.43.45.1.10.2.13.3.0.2			This trap is generated when the device finds that the state of RADIUS accounting server becomes reachable from unreachable.
h3cRadiusAuthClient	1.3.6.1.4.1.43.45.1.10.2.13.4.1
h3cRadiusAuthenticating	1.3.6.1.4.1.43.45.1.10.2.13.4
U32 h3cRadiusAuthErrThreshold	1.3.6.1.4.1.43.45.1.10.2.13.1.3.1	Unsigned32	read-write	The threshold of authentication failure trap. A trap will be sent when the percent of the unsuccessful authentication exceeds this threshold.
NTF h3cRadiusAuthErrTrap	1.3.6.1.4.1.43.45.1.10.2.13.3.0.3			This trap is generated when the device finds that the percent of unsuccessful authentication exceeds a threshold, and the threshold is the value of node h3cRadiusAuthErrThreshold.
C32 h3cRadiusAuthFailureTimes	1.3.6.1.4.1.43.45.1.10.2.13.4.1.1.1.1	Counter32	read-only	The number of RADIUS authenticating failed to this server.
C32 h3cRadiusAuthRejectTimes	1.3.6.1.4.1.43.45.1.10.2.13.4.1.1.1.3	Counter32	read-only	The number of RADIUS authenticating rejected to this server.
NTF h3cRadiusAuthServerDownTrap	1.3.6.1.4.1.43.45.1.10.2.13.3.1			This trap is generated when the authentication RADIUS server doesn't respond client's requests for specified times.
h3cRadiusAuthServerEntry	1.3.6.1.4.1.43.45.1.10.2.13.4.1.1.1		not-accessible	An entry (conceptual row) representing a RADIUS authenticating server with which a client shares a secret.
h3cRadiusAuthServerTable	1.3.6.1.4.1.43.45.1.10.2.13.4.1.1		not-accessible	The (conceptual) table listing the RADIUS authenticating servers with which the client shares a secret.
NTF h3cRadiusAuthServerUpTrap	1.3.6.1.4.1.43.45.1.10.2.13.3.0.1			This trap is generated when the device finds that the state of RADIUS authentication server becomes reachable from unreachable.
C32 h3cRadiusAuthTimeoutTimes	1.3.6.1.4.1.43.45.1.10.2.13.4.1.1.1.2	Counter32	read-only	The number of RADIUS authenticating timeout to this server.
h3cRadiusExtend	1.3.6.1.4.1.43.45.1.10.2.13.5
h3cRadiusExtendObjects	1.3.6.1.4.1.43.45.1.10.2.13.5.1
h3cRadiusExtendTables	1.3.6.1.4.1.43.45.1.10.2.13.5.2
h3cRadiusExtendTraps	1.3.6.1.4.1.43.45.1.10.2.13.5.3
h3cRadiusGlobalConfig	1.3.6.1.4.1.43.45.1.10.2.13.1.3
h3cRadiusSchAccEntry	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1		not-accessible	An entry (conceptual row) representing RADIUS accounting servers.
STR h3cRadiusSchAccGroupName	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1.1	DisplayString	not-accessible	The name of the RADIUS accounting server group referred to in this table entry.
IP h3cRadiusSchAccPrimIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1.2	IpAddress	read-create	The IP address of primary RADIUS accounting server.
STR h3cRadiusSchAccPrimKey	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1.4	DisplayString	read-create	The secret shared between the RADIUS client and the primary RADIUS accounting server used in encoding and decoding sensitive data.
I32 h3cRadiusSchAccPrimUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1.3	Integer32	read-create	The UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1812.
ROW h3cRadiusSchAccRowStatus	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1.8	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRadiusSchAccGroupName must be specified, and this action will create a corresponding domain that h3cDomainRadiusGroupName is the same as h3cRadiusSchAccGroupName. To destroy an existent row, the h3cRadiusSchAccGroupName MUST NOT be referred by h3cDomainTable in h3cDomainRadiusGroupName column.
IP h3cRadiusSchAccSecIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1.5	IpAddress	read-create	The IP address of secondary RADIUS accounting server.
STR h3cRadiusSchAccSecKey	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1.7	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data.
I32 h3cRadiusSchAccSecUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2.1.6	Integer32	read-create	The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1812.
h3cRadiusSchAccTable	1.3.6.1.4.1.43.45.1.10.2.13.5.2.2		not-accessible	The (conceptual) table listing RADIUS accounting servers.
h3cRadiusSchAuthEntry	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1		not-accessible	An entry (conceptual row) representing RADIUS authentication servers.
STR h3cRadiusSchAuthGroupName	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1.1	DisplayString	not-accessible	The name of the RADIUS authentication server group referred to in this table entry.
IP h3cRadiusSchAuthPrimIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1.2	IpAddress	read-create	The IP address of primary RADIUS authenticaiton server.
STR h3cRadiusSchAuthPrimKey	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1.4	DisplayString	read-create	The secret shared between the RADIUS client and the primary RADIUS authentication server used in encoding and decoding sensitive data.
I32 h3cRadiusSchAuthPrimUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1.3	Integer32	read-create	The UDP port the client is using to send requests to primary RADIUS authentication server. Default value is 1812.
ROW h3cRadiusSchAuthRowStatus	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1.8	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRadiusSchAuthGroupName must be specified, and this action will create a corresponding domain that h3cDomainRadiusGroupName is the same as h3cRadiusSchAuthGroupName. To destroy an existent row, the h3cRadiusSchAuthGroupName MUST NOT be referred by h3cDomainTable in h3cDomainRadiusGroupName column.
IP h3cRadiusSchAuthSecIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1.5	IpAddress	read-create	The IP address of secondary RADIUS authenticaiton server.
STR h3cRadiusSchAuthSecKey	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1.7	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data.
I32 h3cRadiusSchAuthSecUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1.1.6	Integer32	read-create	The UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.
h3cRadiusSchAuthTable	1.3.6.1.4.1.43.45.1.10.2.13.5.2.1		not-accessible	The (conceptual) table listing RADIUS authentication servers.
TIK h3cRadiusServerFirstTrapTime	1.3.6.1.4.1.43.45.1.10.2.13.7.1	TimeTicks	accessible-for-notify	Represents the first trap time.
h3cRadiusServerTrap	1.3.6.1.4.1.43.45.1.10.2.13.3
h3cRadiusServerTrapPrefix	1.3.6.1.4.1.43.45.1.10.2.13.3.0
h3cRadiusServerTrapVarObjects	1.3.6.1.4.1.43.45.1.10.2.13.7
C64 h3cRadiusStatAccAck	1.3.6.1.4.1.43.45.1.10.2.13.6.2	Counter64	read-only	It shows the number of radius account response from the radius server.
C64 h3cRadiusStatAccReqEx	1.3.6.1.4.1.43.45.1.10.2.13.6.1	Counter64	read-only	It shows the number of radius account request to the radius server.
h3cRadiusStatistic	1.3.6.1.4.1.43.45.1.10.2.13.6
C64 h3cRadiusStatLogoutAck	1.3.6.1.4.1.43.45.1.10.2.13.6.4	Counter64	read-only	It shows the number of logout response from the radius server.
C64 h3cRadiusStatLogoutReq	1.3.6.1.4.1.43.45.1.10.2.13.6.3	Counter64	read-only	It shows the number of logout request to the radius server.
INT h3cRdAccDataFlowUnit	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.20	INTEGER	read-create	Specify data flow format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (byte) - Specify 'byte' as the unit of data flow. 2 (kiloByte) - Specify 'kilo-byte' as the unit of data flow. 3 (megaByte) - Specify 'mega-byte' as the unit of data flow. 4 (gigaByte) - Specify 'giga-byte' as the unit of data flow. Default value is 1.
INT h3cRdAccFailureAction	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.15	INTEGER	read-create	Defines the action that authentication should take if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore accounting start failure. 2 (reject) - treat as authentication failed if corresponding accounting start fails. Default value is 1(reject).
STR h3cRdAccGroupName	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.1	DisplayString	not-accessible	The name of the RADIUS group referred to in this table entry.
h3cRdAccInfoEntry	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1		not-accessible	An entry (conceptual row) representing a RADIUS accounting server.
h3cRdAccInfoTable	1.3.6.1.4.1.43.45.1.10.2.13.1.2		not-accessible	The (conceptual) table listing RADIUS accounting servers.
STR h3cRdAccKey	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.10	DisplayString	read-create	The secret shared between the RADIUS client and RADIUS accounting server used in encoding and decoding sensitive data. When read, h3cRdAccKey always returns an Octet String of length zero.
IP h3cRdAccNasIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.30	InetAddress	read-create	The source IP address used to communicate with RADIUS accounting server.
IPt h3cRdAccNasIpAddrType	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.29	InetAddressType	read-create	The type (IPv4 or IPv6) of the source IP used to communicate with RADIUS accounting server.
INT h3cRdAccPacketUnit	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.21	INTEGER	read-create	Specify packet format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (onePacket) - Specify 'one-packet' as the unit of packet. 2 (kiloPacket) - Specify 'kilo-packet' as the unit of packet. 3 (megaPacket) - Specify 'mega-packet' as the unit of packet. 4 (gigaPacket) - Specify 'giga-packet' as the unit of packet. Default value is 1.
INT h3cRdAccQuietTime	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.14	INTEGER	read-create	The time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.
INT h3cRdAccRealTime	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.16	INTEGER	read-create	Interval of realtime-accounting packets. The unit is minute. The time must be a multiple of 3. when the value is 0, the device doesn't send realtime-accounting packet. Default value is 12.
INT h3cRdAccRealTimeRetry	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.17	INTEGER	read-create	The number of attempt the client will make when trying to send realtime-accounting packet to accounting server before it will consider the attempt failed. Default value is 5.
I32 h3cRdAccRetry	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.11	Integer32	read-create	The number of attempt the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.
ROW h3cRdAccRowStatus	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.22	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRdAccGroupName must be specified. To destroy an existent row, the h3cRdAccGroupName MUST NOT be referred by h3cDomainTable in h3cDomainRadiusGroupName column.
T/F h3cRdAccSaveStopPktEnable	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.18	TruthValue	read-create	The control of whether save stop-accounting packet in local buffer and resend later when the accounting server doesn't respond. When SaveStopPktEnable is set to false, the value of AccStopRetry will be ignored. Default value is true.
INT h3cRdAccServerType	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.13	INTEGER	read-create	Specify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system. 4 (extended) - Server based on RADIUS extensions. Default type is standard.
INT h3cRdAccStopRetry	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.19	INTEGER	read-create	The number of attempt the client will make when trying to send stop-accounting packet to accounting server. Default value is 500.
I32 h3cRdAccTimeout	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.12	Integer32	read-create	The timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.
T/F h3cRdAcctOnEnable	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.23	TruthValue	read-create	The control of Accounting-On function. The Accounting-On function is used by the client to mark the start of accounting (for example, upon booting) by sending Accounting-On packets and to mark the end of accounting (for example, just before a scheduled reboot) by sending Accounting-Off packets. Default value is false.
I32 h3cRdAcctOnSendInterval	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.25	Integer32	read-create	Interval of Accounting-On packets. The unit is second. Default value is 3.
I32 h3cRdAcctOnSendTimes	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.24	Integer32	read-create	The number of Accounting-On packets the client will send before it considers the accounting server failed. Default value is 15.
IP h3cRdAuthNasIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.23	InetAddress	read-create	The source IP address used to communicate with RADIUS authentication server.
IPt h3cRdAuthNasIpAddrType	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.22	InetAddressType	read-create	The type (IPv4 or IPv6) of the source IP used to communicate with RADIUS authentication server.
STR h3cRdGroupName	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.1	DisplayString	not-accessible	The name of the RADIUS authentication group referred to in this table entry.
h3cRdInfoEntry	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1		not-accessible	An entry (conceptual row) representing a RADIUS authentication server.
h3cRdInfoTable	1.3.6.1.4.1.43.45.1.10.2.13.1.1		not-accessible	The (conceptual) table listing RADIUS authentication servers.
STR h3cRdKey	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.8	DisplayString	read-create	The secret shared between the RADIUS client and RADIUS authentication server used in encoding and decoding sensitive data. When read, h3cRdKey always returns an Octet String of length zero.
h3cRdObjects	1.3.6.1.4.1.43.45.1.10.2.13.1
IP h3cRdPrimAccIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.3	InetAddress	read-create	The IP address of primary RADIUS accounting server.
IPt h3cRdPrimAccIpAddrType	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.2	InetAddressType	read-create	The IP addresses type (IPv4 or IPv6) of primary RADIUS accounting server.
INT h3cRdPrimAccState	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.5	INTEGER	read-create	The state of the primary RADIUS accounting server. 1 (active) The primary accounting server is in active state. 2 (block) The primary accounting server is in block state.
I32 h3cRdPrimAccUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.4	Integer32	read-create	The UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1813.
STR h3cRdPrimAccVpnName	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.27	DisplayString	read-create	The human-readable name of the VPN in which the primary RADIUS accounting server is placed.
IP h3cRdPrimAuthIp	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.2	IpAddress	read-create	The IP address of primary RADIUS authentication server.
IP h3cRdPrimAuthIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.12	InetAddress	read-create	The IP address of primary RADIUS authentication server.
IPt h3cRdPrimAuthIpAddrType	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.11	InetAddressType	read-create	The IP addresses type (IPv4 or IPv6) of primary RADIUS authentication server.
INT h3cRdPrimState	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.4	INTEGER	read-create	The state of the primary RADIUS authentication server. 1 (active) The primary authentication server is in active state. 2 (block) The primary authentication server is in block state.
I32 h3cRdPrimUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.3	Integer32	read-create	The UDP port the client is using to send requests to primary RADIUS authentication server. Default value is 1812.
STR h3cRdPrimVpnName	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.20	DisplayString	read-create	The human-readable name of the VPN in which the primary RADIUS authentication server is placed.
INT h3cRdQuietTime	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.16	INTEGER	read-create	The time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.
I32 h3cRdRetry	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.9	Integer32	read-create	The number of attempts the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.
ROW h3cRdRowStatus	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.18	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRdGroupName must be specified. To destroy an existent row, the h3cRdGroupName MUST NOT be referred by h3cDomainTable in h3cDomainRadiusGroupName column.
IP h3cRdSecAccIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.7	InetAddress	read-create	The IP address of secondary RADIUS accounting server.
IPt h3cRdSecAccIpAddrType	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.6	InetAddressType	read-create	The IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server.
STR h3cRdSecAccKey	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.26	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. When read, h3cRdSecAccKey always returns an Octet String of length zero.
INT h3cRdSecAccState	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.9	INTEGER	read-create	The state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.
I32 h3cRdSecAccUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.8	Integer32	read-create	The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.
STR h3cRdSecAccVpnName	1.3.6.1.4.1.43.45.1.10.2.13.1.2.1.28	DisplayString	read-create	The human-readable name of the VPN in which the secondary RADIUS accounting server is placed.
IP h3cRdSecAuthIp	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.5	IpAddress	read-create	The IP address of secondary RADIUS authentication server.
IP h3cRdSecAuthIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.14	InetAddress	read-create	The IP address of secondary RADIUS authentication server.
IPt h3cRdSecAuthIpAddrType	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.13	InetAddressType	read-create	The IP addresses type (IPv4 or IPv6) of secondary RADIUS authentication server.
STR h3cRdSecKey	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.19	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data. When read, h3cRdSecKey always returns an Octet String of length zero.
IP h3cRdSecondaryAccIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.1.5.1.2	InetAddress	not-accessible	The IP address of secondary RADIUS accounting server.
IPt h3cRdSecondaryAccIpAddrType	1.3.6.1.4.1.43.45.1.10.2.13.1.5.1.1	InetAddressType	not-accessible	The IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server.
STR h3cRdSecondaryAccKey	1.3.6.1.4.1.43.45.1.10.2.13.1.5.1.6	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. When read, h3cRdSecondaryAccKey always returns an Octet String of length zero.
ROW h3cRdSecondaryAccRowStatus	1.3.6.1.4.1.43.45.1.10.2.13.1.5.1.7	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRdAccGroupName must be specified. The number of rows with the same h3cRdAccGroupName cann't be more than 15.
h3cRdSecondaryAccServerEntry	1.3.6.1.4.1.43.45.1.10.2.13.1.5.1		not-accessible	An entry (conceptual row) representing a RADIUS secondary accounting server.
h3cRdSecondaryAccServerTable	1.3.6.1.4.1.43.45.1.10.2.13.1.5		not-accessible	The (conceptual) table listing RADIUS secondary accounting servers.
INT h3cRdSecondaryAccState	1.3.6.1.4.1.43.45.1.10.2.13.1.5.1.5	INTEGER	read-create	The state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.
I32 h3cRdSecondaryAccUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.1.5.1.4	Integer32	not-accessible	The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1812.
STR h3cRdSecondaryAccVpnName	1.3.6.1.4.1.43.45.1.10.2.13.1.5.1.3	DisplayString	not-accessible	The human-readable name of the VPN in which the secondary RADIUS accounting server is placed.
IP h3cRdSecondaryAuthIpAddr	1.3.6.1.4.1.43.45.1.10.2.13.1.4.1.2	InetAddress	not-accessible	The IP address of secondary RADIUS authentication server.
IPt h3cRdSecondaryAuthIpAddrType	1.3.6.1.4.1.43.45.1.10.2.13.1.4.1.1	InetAddressType	not-accessible	The IP addresses type (IPv4 or IPv6) of secondary RADIUS authentication server.
STR h3cRdSecondaryAuthKey	1.3.6.1.4.1.43.45.1.10.2.13.1.4.1.6	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data. When read, h3cRdSecondaryAuthKey always returns an Octet String of length zero.
ROW h3cRdSecondaryAuthRowStatus	1.3.6.1.4.1.43.45.1.10.2.13.1.4.1.7	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRdGroupName must be specified. The number of rows with the same h3cRdGroupName cann't be more than 15.
h3cRdSecondaryAuthServerEntry	1.3.6.1.4.1.43.45.1.10.2.13.1.4.1		not-accessible	An entry (conceptual row) representing a RADIUS secondary authentication server.
h3cRdSecondaryAuthServerTable	1.3.6.1.4.1.43.45.1.10.2.13.1.4		not-accessible	The (conceptual) table listing RADIUS secondary authentication servers.
INT h3cRdSecondaryAuthState	1.3.6.1.4.1.43.45.1.10.2.13.1.4.1.5	INTEGER	read-create	The state of the secondary RADIUS authentication server. 1 (active) The secondary authentication server is in active state. 2 (block) The secondary authentication server is in block state.
I32 h3cRdSecondaryAuthUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.1.4.1.4	Integer32	not-accessible	The UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.
STR h3cRdSecondaryAuthVpnName	1.3.6.1.4.1.43.45.1.10.2.13.1.4.1.3	DisplayString	not-accessible	The human-readable name of the VPN in which the secondary RADIUS authentication server is placed.
INT h3cRdSecState	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.7	INTEGER	read-create	The state of the secondary RADIUS authentication server. 1 (active) The secondary authentication server is in active state. 2 (block) The secondary authentication server is in block state.
I32 h3cRdSecUdpPort	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.6	Integer32	read-create	The UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.
STR h3cRdSecVpnName	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.21	DisplayString	read-create	The human-readable name of the VPN in which the secondary RADIUS authentication server is placed.
INT h3cRdServerType	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.15	INTEGER	read-create	Specify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system. 4 (extended) - Server based on RADIUS extensions. Default type is standard.
I32 h3cRdTimeout	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.10	Integer32	read-create	The timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.
INT h3cRdUserNameFormat	1.3.6.1.4.1.43.45.1.10.2.13.1.1.1.17	INTEGER	read-create	Specify the user-name format that is sent to RADIUS server. 1 (withoutdomain) - send the user-name without domain. 2 (withdomain) - send the user-name with domain. 3 (keeporignal) - send the user-name as it is entered. Default format is withdomain.

RFC description

H3C RADIUS authentication and accounting server management with trap notifications.

Start monitoring H3C/3Com switches and routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-RADIUS-MIB