F10-S-SERIES-CHASSIS-MIB

All MIBs › F10-S-SERIES-CHASSIS-MIB

Organization: Dell Inc

Last Updated: 2013-01-01

Category: Hardware and Environment, Vendor: Dell/DNOS

Description: Dell Force10 MIB for S-Series fixed-configuration switch chassis inventory including power, fan, and module components.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F10-S-SERIES-CHASSIS-MIB?

F10-S-SERIES-CHASSIS-MIB is a Dell (Force10 Networks) MIB that models the hardware chassis of the S-Series family of fixed-configuration top-of-rack switches running Dell Networking OS. Unlike the modular M-Series, S-Series units are fixed-form-factor but the MIB still exposes chassis-level inventory for components such as power supplies, fan modules, and any expansion/uplink modules present in the unit. Its main use is hardware status monitoring — determining whether power supplies are present and delivering power, whether fans are operating within normal ranges, and whether the unit or any stacked member is healthy. It is typically used together with other Dell/Force10 system MIBs and, where stacking is involved, stack-unit status objects, to give a complete picture of a stack of S-Series switches. Deployment is typical top-of-rack and access-layer switching in data centers, where multiple S-Series units are often stacked for resiliency. Network engineers evaluating or troubleshooting this functionality can download the F10-S-SERIES-CHASSIS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F10-S-SERIES-CHASSIS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell Force10 S-Series fixed-configuration switches

Monitoring Examples

An administrator monitoring an S-Series stack would poll the power-supply status table to confirm each unit's PSU is present and in a normal operating state, and the fan status table to catch an overheating condition caused by a failed fan before it triggers thermal shutdown. Because exact object names were not present in the sampled data for this module, this describes the general power/fan/module monitoring pattern rather than citing specific identifiers.

What Can Be Monitored

power supply status
fan status
module/expansion card inventory
stack unit health

Imported Objects

From F10-CHASSIS-MIB

chAlarmVarInteger	OBJECT-TYPE
chAlarmVarPort	OBJECT-TYPE
chAlarmVarSlot	OBJECT-TYPE
chAlarmVarString	OBJECT-TYPE

From FORCE10-SMI

f10Mgmt

OBJECT-IDENTITY

From FORCE10-TC

F10ChassisType
F10HundredthdB
F10MfgDate
F10ProcessorModuleType
F10SSeriesPortType
F10SwDate

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
f10SSerChassisMib	1.3.6.1.4.1.6027.3.10			Dell Networking OS S-Series Chassis MIB.
f10SSerChassisObject	1.3.6.1.4.1.6027.3.10.1
chObjects	1.3.6.1.4.1.6027.3.10.1.1
I32 chNumStackUnits	1.3.6.1.4.1.6027.3.10.1.1.1	Integer32	read-only	The total number of stack units configured on the chassis.
I32 chNumMaxStackableUnits	1.3.6.1.4.1.6027.3.10.1.1.2	Integer32	read-only	Indicates the maximum allowed Unit Number configurable on the chassis.
I32 chStackUnitIndexNext	1.3.6.1.4.1.6027.3.10.1.1.3	Integer32	read-only	This object contains the next appropriate value to be used for chStackUnitIndex when creating entries in the chStackUnitTable. The value 0 indicates that no unassigned entries are available. To obtain the chStackUnitIndexNext value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned number after each retrieval operation. After a manager retrieves a value the agent will determine when this index value will be made available for reuse. Note that this object is not the unit number assigned by the management unit. The max number of stackable units allowed on this chassis is found from the object chNumMaxStackableUnits.
chSysObjects	1.3.6.1.4.1.6027.3.10.1.2
chSwitchTypeTable	1.3.6.1.4.1.6027.3.10.1.2.1		not-accessible	A list of supported switch types.
chSwitchTypeEntry	1.3.6.1.4.1.6027.3.10.1.2.1.1		not-accessible	A list of supported switch types entries.
I32 chSwitchTypeSID	1.3.6.1.4.1.6027.3.10.1.2.1.1.1	Integer32	read-only	The unique switch type index (SID).
STR chSwitchTypeModelID	1.3.6.1.4.1.6027.3.10.1.2.1.1.2	DisplayString	read-only	The pre-configured model ID for this swich type.
COD chSwitchTypeCodeType	1.3.6.1.4.1.6027.3.10.1.2.1.1.3	CodeType	read-only	The code type of this switch type.
I32 chSwitchTypeMgmtPreference	1.3.6.1.4.1.6027.3.10.1.2.1.1.4	Integer32	read-only	indicates the default prefernce value for the management unit. A value of 0 indicates a disabled or unassigned preference.
chStackUnitTable	1.3.6.1.4.1.6027.3.10.1.2.2		not-accessible	A list of stack units configured in the chassis. The StackUnit table contains the management information of each stacked unit in the chassis.
chStackUnitEntry	1.3.6.1.4.1.6027.3.10.1.2.2.1		not-accessible	A list of units entries containing information for each stacked unit.
I32 chStackUnitIndex	1.3.6.1.4.1.6027.3.10.1.2.2.1.1	Integer32	not-accessible	The unique index for this entry. Refer to the object chStackUnitIndexNext.
I32 chStackUnitNumber	1.3.6.1.4.1.6027.3.10.1.2.2.1.2	Integer32	read-create	The unit number associated with this unit. The unit number can be manually assigned to stack members. Note that the unit number assignment is based on the following factors: - if the unit number is requested here, but another unit already uses that number, the unit changes its configured unit number to the lowest unassigned unit number. - if the unit number is 0, i.e. unassigned, then the unit sets its configured unit number to the lowest unassigned unit number. - if the unit number is configured and no other device uses the unit number, then the unit starts using the configured unit number. - if a unit detects that the maximum number of units already exist, the unit sets its unit number to 0, i.e. unassigned, and stays in the Initialization state. - The max number of stackable units allowed on this chassis is found from the object chNumMaxStackableUnits.
I32 chStackUnitSID	1.3.6.1.4.1.6027.3.10.1.2.2.1.3	Integer32	read-create	The index of the chSwitchTypeTable which this unit is associated with.
INT chStackUnitMgmtStatus	1.3.6.1.4.1.6027.3.10.1.2.2.1.4	INTEGER	read-create	Indicates whether the unit is a Management Unit, a Stack Unit, or unassigned. Setting this object to mgmtUnit(1) initiates transfer of the management functionality to the specified stack unit. Object values stackUnit(2) and unassigned(3) cannot be set.
INT chStackUnitHwMgmtPreference	1.3.6.1.4.1.6027.3.10.1.2.2.1.5	INTEGER	read-only	indicates whether the unit is capable of becoming a management unit. if it is unsigned, this unit can be a management unit.
I32 chStackUnitAdmMgmtPreference	1.3.6.1.4.1.6027.3.10.1.2.2.1.6	Integer32	read-create	indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference.
STR chStackUnitModelID	1.3.6.1.4.1.6027.3.10.1.2.2.1.7	DisplayString	read-only	The plugged-in model ID for this unit.
INT chStackUnitStatus	1.3.6.1.4.1.6027.3.10.1.2.2.1.8	INTEGER	read-only	The status of this unit.
STR chStackUnitDescription	1.3.6.1.4.1.6027.3.10.1.2.2.1.9	DisplayString	read-create	The description of this unit.
STR chStackUnitCodeVersion	1.3.6.1.4.1.6027.3.10.1.2.2.1.10	DisplayString	read-only	Current code version of this unit.
STR chStackUnitCodeVersionInFlash	1.3.6.1.4.1.6027.3.10.1.2.2.1.11	DisplayString	read-only	Code version of this unit's flash.
STR chStackUnitSerialNumber	1.3.6.1.4.1.6027.3.10.1.2.2.1.12	DisplayString	read-only	The unit's serial number.
TIK chStackUnitUpTime	1.3.6.1.4.1.6027.3.10.1.2.2.1.13	TimeTicks	read-only	The system up time of the unit.
G32 chStackUnitTemp	1.3.6.1.4.1.6027.3.10.1.2.2.1.14	Gauge32	read-only	The temperature of the unit.
UNI chStackUnitType	1.3.6.1.4.1.6027.3.10.1.2.2.1.15	UnitType	read-only	The Unit Type identifier for this unit.
F10 chStackUnitSysType	1.3.6.1.4.1.6027.3.10.1.2.2.1.16	F10ChassisType	read-only	The Dell Networking OS system type for this unit.
STR chStackUnitVendorId	1.3.6.1.4.1.6027.3.10.1.2.2.1.17	DisplayString	read-only	The vendor id that manufactured this unit.
F10 chStackUnitMfgDate	1.3.6.1.4.1.6027.3.10.1.2.2.1.18	F10MfgDate	read-only	The date the unit is manufactured.
MAC chStackUnitMacAddress	1.3.6.1.4.1.6027.3.10.1.2.2.1.19	MacAddress	read-only	A 6-octet MAC Address assigned to this unit.
STR chStackUnitPartNum	1.3.6.1.4.1.6027.3.10.1.2.2.1.20	DisplayString	read-only	The unit part number
STR chStackUnitProductRev	1.3.6.1.4.1.6027.3.10.1.2.2.1.21	DisplayString	read-only	The unit manufacturer's product revision
STR chStackUnitProductOrder	1.3.6.1.4.1.6027.3.10.1.2.2.1.22	DisplayString	read-only	The product order number for this unit.
OCT chStackUnitCountryCode	1.3.6.1.4.1.6027.3.10.1.2.2.1.23	OCTET STRING	read-only	The unit manufacturer's country code
I32 chStackUnitNum10GigEtherPorts	1.3.6.1.4.1.6027.3.10.1.2.2.1.24	Integer32	read-only	The number of 10G Ethernet/802.3 interfaces in this unit.
I32 chStackUnitNumGigEtherPorts	1.3.6.1.4.1.6027.3.10.1.2.2.1.25	Integer32	read-only	The number of 1G Ethernet/802.3 interfaces in this unit.
I32 chStackUnitNumFastEtherPorts	1.3.6.1.4.1.6027.3.10.1.2.2.1.26	Integer32	read-only	The number of 10/100 Ethernet/802.3 interfaces in this unit.
I32 chStackUnitNumFanTrays	1.3.6.1.4.1.6027.3.10.1.2.2.1.27	Integer32	read-only	The number of fan trays on the unit.
I32 chStackUnitNumPowerSupplies	1.3.6.1.4.1.6027.3.10.1.2.2.1.28	Integer32	read-only	The number of power supply in the unit.
I32 chStackUnitNumPluggableModules	1.3.6.1.4.1.6027.3.10.1.2.2.1.29	Integer32	read-only	The number of pluggable modules in the stack.
I32 chStackUnitNum40GigEtherPorts	1.3.6.1.4.1.6027.3.10.1.2.2.1.30	Integer32	read-only	The number of 40G Ethernet/802.3 interfaces in this unit.
ROW chStackUnitRowStatus	1.3.6.1.4.1.6027.3.10.1.2.2.1.31	RowStatus	read-create	Creation of new instances requires the object chStackUnitIndexNext to be retreived to create an entry. active(1) - This instance is active. createAndGo(4) - Creates a new instance. destroy(6) - Removes this instance.
STR chStackUnitPiecePartID	1.3.6.1.4.1.6027.3.10.1.2.2.1.32	DisplayString	read-only	The unit's piece part id.
STR chStackUnitPPIDRevision	1.3.6.1.4.1.6027.3.10.1.2.2.1.33	DisplayString	read-only	The unit's PPID revision.
STR chStackUnitServiceTag	1.3.6.1.4.1.6027.3.10.1.2.2.1.34	DisplayString	read-only	The unit's service tag.
STR chStackUnitExpressServiceCode	1.3.6.1.4.1.6027.3.10.1.2.2.1.35	DisplayString	read-only	The unit's express service code.
chSysPowerSupplyTable	1.3.6.1.4.1.6027.3.10.1.2.3		not-accessible	A list of power supply resident in the S-series chassis.
chSysPowerSupplyEntry	1.3.6.1.4.1.6027.3.10.1.2.3.1		not-accessible	A power supply entry containing objects for a particular power supply.
I32 chSysPowerSupplyIndex	1.3.6.1.4.1.6027.3.10.1.2.3.1.1	Integer32	read-only	The unique index of the power supply.
INT chSysPowerSupplyOperStatus	1.3.6.1.4.1.6027.3.10.1.2.3.1.2	INTEGER	read-only	The status of the power supply.
INT chSysPowerSupplyType	1.3.6.1.4.1.6027.3.10.1.2.3.1.3	INTEGER	read-only	The type of the power supply.
STR chSysPowerSupplyPiecePartID	1.3.6.1.4.1.6027.3.10.1.2.3.1.4	DisplayString	read-only	The power supply's piece part id.
STR chSysPowerSupplyPPIDRevision	1.3.6.1.4.1.6027.3.10.1.2.3.1.5	DisplayString	read-only	The power supply's PPID revision.
STR chSysPowerSupplyServiceTag	1.3.6.1.4.1.6027.3.10.1.2.3.1.6	DisplayString	read-only	The power supply's service tag.
STR chSysPowerSupplyExpressServiceCode	1.3.6.1.4.1.6027.3.10.1.2.3.1.7	DisplayString	read-only	The power supply's express service code.
chSysFanTrayTable	1.3.6.1.4.1.6027.3.10.1.2.4		not-accessible	A list of fan tray resident in the S-series chassis.
chSysFanTrayEntry	1.3.6.1.4.1.6027.3.10.1.2.4.1		not-accessible	A fan entry containing objects for a particular fan tray.
I32 chSysFanTrayIndex	1.3.6.1.4.1.6027.3.10.1.2.4.1.1	Integer32	read-only	The unique index of the fan tray.
INT chSysFanTrayOperStatus	1.3.6.1.4.1.6027.3.10.1.2.4.1.2	INTEGER	read-only	The status of the fan tray.
STR chSysFanTrayPiecePartID	1.3.6.1.4.1.6027.3.10.1.2.4.1.3	DisplayString	read-only	The fan tray's piece part id.
STR chSysFanTrayPPIDRevision	1.3.6.1.4.1.6027.3.10.1.2.4.1.4	DisplayString	read-only	The fan tray's PPID revision.
STR chSysFanTrayServiceTag	1.3.6.1.4.1.6027.3.10.1.2.4.1.5	DisplayString	read-only	The fan tray's service tag.
STR chSysFanTrayExpressServiceCode	1.3.6.1.4.1.6027.3.10.1.2.4.1.6	DisplayString	read-only	The fan tray's express service code.
chSysPortTable	1.3.6.1.4.1.6027.3.10.1.2.5		not-accessible	A list of ports in the S-series chassis.
chSysPortEntry	1.3.6.1.4.1.6027.3.10.1.2.5.1		not-accessible	A port entry containing objects for a particular port.
I32 chSysPortIndex	1.3.6.1.4.1.6027.3.10.1.2.5.1.1	Integer32	read-only	A unique index for each slot within the unit.
F10 chSysPortType	1.3.6.1.4.1.6027.3.10.1.2.5.1.2	F10SSeriesPortType	read-only	The type of port in the unit.
INT chSysPortAdminStatus	1.3.6.1.4.1.6027.3.10.1.2.5.1.3	INTEGER	read-only	The admin status of the card. The port admin status is Up if the user has configured it to be up otherwise, the admin status is Down.
INT chSysPortOperStatus	1.3.6.1.4.1.6027.3.10.1.2.5.1.4	INTEGER	read-only	The operational status provides further condition of the card. If the chSysPortAdminStatus is 'up', the valid state is 'ready' - the card is present and ready and the chSysPortAdminStatus status is 'up'. 'portDown' - the port is down or not enabled. 'portProblem' - port hardware problems. 'cardProblem' - not used. Same as cardDown. 'cardDown' - the card is downed. 'notPresent' - the card is not present.
I32 chSysPortIfIndex	1.3.6.1.4.1.6027.3.10.1.2.5.1.5	Integer32	read-only	The index of ifIndex in the Interface Mib. This index can link to the ifEntry to get this interface/port information
F10 chSysPortXfpRecvPower	1.3.6.1.4.1.6027.3.10.1.2.5.1.6	F10HundredthdB	read-only	The power signal strength (dB) received for 1G/10G/40G Ethernet/802.3 interface.
I32 chSysPortXfpRecvTemp	1.3.6.1.4.1.6027.3.10.1.2.5.1.7	Integer32	read-only	The temperature value received for the optics.
F10 chSysPortXfpTxPower	1.3.6.1.4.1.6027.3.10.1.2.5.1.8	F10HundredthdB	read-only	The power signal strength (dB) Transmitted for 1G/10G/40G Ethernet/802.3 interface.
chSysStackPortTable	1.3.6.1.4.1.6027.3.10.1.2.6		not-accessible	A list of stack ports in the S-series chassis.
chSysStackPortEntry	1.3.6.1.4.1.6027.3.10.1.2.6.1		not-accessible	A stack port entry containing objects for a particular stack port.
I32 chSysStackPortIndex	1.3.6.1.4.1.6027.3.10.1.2.6.1.1	Integer32	read-only	The index for each stack port within the unit. 1 - stack port A, 2 - stack port B
INT chSysStackPortConfiguredMode	1.3.6.1.4.1.6027.3.10.1.2.6.1.2	INTEGER	read-only	Configured mode of the Stack Port. Changes to this value happen only after a reset of the unit.
INT chSysStackPortRunningMode	1.3.6.1.4.1.6027.3.10.1.2.6.1.3	INTEGER	read-only	Operational mode of the Stack Port.
INT chSysStackPortLinkStatus	1.3.6.1.4.1.6027.3.10.1.2.6.1.4	INTEGER	read-only	Link status of the Stack Port. Ports in ethernet mode will return a status of down(2).
G32 chSysStackPortLinkSpeed	1.3.6.1.4.1.6027.3.10.1.2.6.1.5	Gauge32	read-only	Speed of the Stack Port measured in Gb/s. Ports in ethernet mode will return a speed of 0.
C32 chSysStackPortRxDataRate	1.3.6.1.4.1.6027.3.10.1.2.6.1.6	Counter32	read-only	Received Data rate on the stacking port. Measured in Mb/s. Ports in ethernet mode will return 0.
C32 chSysStackPortRxErrorRate	1.3.6.1.4.1.6027.3.10.1.2.6.1.7	Counter32	read-only	Received error rate on the stack port. Measured in Errors per Second. Ports in ethernet mode will return 0.
C32 chSysStackPortRxTotalErrors	1.3.6.1.4.1.6027.3.10.1.2.6.1.8	Counter32	read-only	Received number of errors since boot. The counter may wrap. Ports in ethernet mode will return 0.
C32 chSysStackPortTxDataRate	1.3.6.1.4.1.6027.3.10.1.2.6.1.9	Counter32	read-only	Transmitted Data rate on the stacking port. Measured in Mb/s. Ports in ethernet mode will return 0.
C32 chSysStackPortTxErrorRate	1.3.6.1.4.1.6027.3.10.1.2.6.1.10	Counter32	read-only	Transmitted error rate on the stack port. Measured in Errors per Second. Ports in ethernet mode will return 0.
C32 chSysStackPortTxTotalErrors	1.3.6.1.4.1.6027.3.10.1.2.6.1.11	Counter32	read-only	Transmitted number of errors since boot. The counter may wrap. Ports in ethernet mode will return 0.
chSysProcessorTable	1.3.6.1.4.1.6027.3.10.1.2.7		not-accessible	A list of Processors resident in the S-series chassis.
chSysProcessorEntry	1.3.6.1.4.1.6027.3.10.1.2.7.1		not-accessible	A list of Processor entries.
F10 chSysProcessorModule	1.3.6.1.4.1.6027.3.10.1.2.7.1.1	F10ProcessorModuleType	read-only	The type of module running on the Processor.
TIK chSysProcessorUpTime	1.3.6.1.4.1.6027.3.10.1.2.7.1.2	TimeTicks	read-only	The SysUpTime for this Processor.
I32 chSysProcessorNvramSize	1.3.6.1.4.1.6027.3.10.1.2.7.1.3	Integer32	read-only	Total Non-volatile RAM in Kbytes.
I32 chSysProcessorMemSize	1.3.6.1.4.1.6027.3.10.1.2.7.1.4	Integer32	read-only	The size of the RAM in Mb.
chSysSwModuleTable	1.3.6.1.4.1.6027.3.10.1.2.8		not-accessible	A list of software version information in a processor.
chSysSwModuleEntry	1.3.6.1.4.1.6027.3.10.1.2.8.1		not-accessible	A software module entry containing version number information for a particular processor.
STR chSysSwRuntimeImgVersion	1.3.6.1.4.1.6027.3.10.1.2.8.1.1	DisplayString	read-only	This variable indicates the software module version that is currently running on the processor. The software release version is in the format as follow: ........ '1.2' indicate major version of 1 and minor release of 2.
F10 chSysSwRuntimeImgDate	1.3.6.1.4.1.6027.3.10.1.2.8.1.2	F10SwDate	read-only	The release date of this software module.
STR chSysSwCurrentBootImgVersion	1.3.6.1.4.1.6027.3.10.1.2.8.1.3	DisplayString	read-only	This provides the uboot image version that is currently running and it is in the format as follow: ........ '1.2' indicate major version of 1 and minor release of 2.
DAT chSysSwCurrentBootImgDate	1.3.6.1.4.1.6027.3.10.1.2.8.1.4	DateAndTime	read-only	The release date of this software module If the CPU is reset, the software module running date (chSysSwModuleRunningDate) will change to this current date.
INT chSysSwCurrentBootImgStatus	1.3.6.1.4.1.6027.3.10.1.2.8.1.5	INTEGER	read-only	The status of current boot image.
STR chSysSwBackupBootImgVersion	1.3.6.1.4.1.6027.3.10.1.2.8.1.6	DisplayString	read-only	This provides the uboot image version that would be the backup image and it is in the format as follow: ........ '1.2' indicate major version of 1 and minor release of 2.
DAT chSysSwBackupBootImgDate	1.3.6.1.4.1.6027.3.10.1.2.8.1.7	DateAndTime	read-only	The backup boot image released date.
INT chSysSwBackupBootImgStatus	1.3.6.1.4.1.6027.3.10.1.2.8.1.8	INTEGER	read-only	The status of the backup boot image.
INT chSysSwNextRebootImage	1.3.6.1.4.1.6027.3.10.1.2.8.1.9	INTEGER	read-only	The boot flash image selection. When the chassis is rebooted, this is the boot image to use.
INT chSysSwCurrentBootImage	1.3.6.1.4.1.6027.3.10.1.2.8.1.10	INTEGER	read-only	The current boot image. This is the boot image described by the chSysSwCurrentBootImgVersion, chSysSwCurrentBootImgDate, and chSysSwCurrentBootImgStatus objects.
STR chSysSwInPartitionAImgVers	1.3.6.1.4.1.6027.3.10.1.2.8.1.11	DisplayString	read-only	This provides the Dell Networking OS system image version that is stored in partition A: and The version string has Major and Minor release numbers. It also denotes if the release is Maintenance, Technical, Patch, Beta, or Generally Available
STR chSysSwInPartitionBImgVers	1.3.6.1.4.1.6027.3.10.1.2.8.1.12	DisplayString	read-only	This provides the Dell Networking OS system image version that is stored in partition B: and The version string has Major and Minor release numbers. It also denotes if the release is Maintenance, Technical, Patch, Beta, or Generally Available
chStackUnitUtilTable	1.3.6.1.4.1.6027.3.10.1.2.9		not-accessible	A table listing the cpu and memory utilization in the stack unit.
chStackUnitUtilEntry	1.3.6.1.4.1.6027.3.10.1.2.9.1		not-accessible	A row in each processor cpu and mmory utilization
F10 chStackUnitCpuType	1.3.6.1.4.1.6027.3.10.1.2.9.1.1	F10ProcessorModuleType	read-only	The type of module running on the Processor.
G32 chStackUnitCpuUtil5Sec	1.3.6.1.4.1.6027.3.10.1.2.9.1.2	Gauge32	read-only	CPU utilization in percentage for last 5 seconds.
G32 chStackUnitCpuUtil1Min	1.3.6.1.4.1.6027.3.10.1.2.9.1.3	Gauge32	read-only	CPU utilization in percentage for last 1 minute.
G32 chStackUnitCpuUtil5Min	1.3.6.1.4.1.6027.3.10.1.2.9.1.4	Gauge32	read-only	CPU utilization in percentage for last 5 minutes.
G32 chStackUnitMemUsageUtil	1.3.6.1.4.1.6027.3.10.1.2.9.1.5	Gauge32	read-only	Total memory usage in percentage.
G32 chStackUnitFlashUsageUtil	1.3.6.1.4.1.6027.3.10.1.2.9.1.6	Gauge32	read-only	Total flash usage in percentage.
chSysSwCoresTable	1.3.6.1.4.1.6027.3.10.1.2.10		not-accessible	A table containing information about the software cores that have been generated as a result of system failures.
chSysCoresEntry	1.3.6.1.4.1.6027.3.10.1.2.10.1		not-accessible	A row in the software core table representing information about a core that has been generated.
INT chSysCoresInstance	1.3.6.1.4.1.6027.3.10.1.2.10.1.1	INTEGER	read-only	A unique index assigned to the cores stored on this stack unit.
STR chSysCoresFileName	1.3.6.1.4.1.6027.3.10.1.2.10.1.2	DisplayString	read-only	The name of the core file including the path.
F10 chSysCoresTimeCreated	1.3.6.1.4.1.6027.3.10.1.2.10.1.3	F10SwDate	read-only	The time at which the core file was created.
I32 chSysCoresStackUnitNumber	1.3.6.1.4.1.6027.3.10.1.2.10.1.4	Integer32	read-only	The stack unit member which generated the core.
STR chSysCoresProcess	1.3.6.1.4.1.6027.3.10.1.2.10.1.5	DisplayString	read-only	The name of the process which generated the core.
chAlarmObjects	1.3.6.1.4.1.6027.3.10.1.4
chAlarmMibNotifications	1.3.6.1.4.1.6027.3.10.1.4.0
NTF chAlarmStackUnitDown	1.3.6.1.4.1.6027.3.10.1.4.0.1			The driver/agent generate this trap when a stack unit operational status is down.
NTF chAlarmStackUnitUp	1.3.6.1.4.1.6027.3.10.1.4.0.2			The driver/agent generate this trap when a stack unit operational status is up.
NTF chAlarmStackUnitReset	1.3.6.1.4.1.6027.3.10.1.4.0.3			The driver/agent generate this trap when a stack unit is reset.
NTF chAlarmStackUnitOffline	1.3.6.1.4.1.6027.3.10.1.4.0.4			The driver/agent generate this trap when a stack unit is set to offline.
NTF chAlarmStackUnitCodeMismatch	1.3.6.1.4.1.6027.3.10.1.4.0.5			The driver/agent generate this trap when a stack unit is not the same code as a management stack.
NTF chAlarmStackPortLinkUp	1.3.6.1.4.1.6027.3.10.1.4.0.6			The driver/agent generate this trap when a stack port is connected to annother stack member.
NTF chAlarmStackPortLinkDown	1.3.6.1.4.1.6027.3.10.1.4.0.7			The driver/agent generate this trap when a stack port is disconnected from annother stack member.
f10sSeriesMibConformance	1.3.6.1.4.1.6027.3.10.2
f10sSeriesMibCompliances	1.3.6.1.4.1.6027.3.10.2.1
f10sSeriesMibCompliance	1.3.6.1.4.1.6027.3.10.2.1.1			The compliance statement for Dell Networking OS product which implement the f10 S-Series Chassis MIB.
f10sSeriesMibGroups	1.3.6.1.4.1.6027.3.10.2.2
f10sSeriesComponentGroup	1.3.6.1.4.1.6027.3.10.2.2.1			A collection of objects providing the overall S-series chassis information.
f10sSeriesSystemGroup	1.3.6.1.4.1.6027.3.10.2.2.2			A collection of objects providing the chassis system hardware information.
f10sSeriesNotificationGroup	1.3.6.1.4.1.6027.3.10.2.2.3			Notifications for Dell Networking OS S-Series Chassis mib

RFC description

Monitors Dell S-Series network chassis components including power supplies, fans, and software partitions.

Start monitoring Dell Force10 S-Series fixed-configuration top-of-rack switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F10-S-SERIES-CHASSIS-MIB

What Is F10-S-SERIES-CHASSIS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description