EdgeSwitch-MULTICAST-MIB

All MIBs › EdgeSwitch-MULTICAST-MIB

Organization: Broadcom Inc

Last Updated: 2011-01-26

Category: Technology: Multicast, Vendor: EdgeSwitch/Ubiquiti

Description: Ubiquiti EdgeSwitch multicast MIB for managing IGMP snooping, multicast routing, and multicast group membership.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EdgeSwitch-MULTICAST-MIB?

The EdgeSwitch-MULTICAST-MIB is part of Ubiquiti's FastPath-based Multicast Routing Flex package for EdgeSwitch devices, covering IGMP snooping, multicast routing, and multicast group membership management. It exposes configuration objects (enabling snooping/routing per VLAN) alongside operational tables of current multicast group memberships and forwarding state. Its monitoring value is largely software/protocol-state: confirming IGMP snooping is active, that group membership tables reflect real receivers, and that multicast traffic is being forwarded only to the correct ports rather than flooded. It layers on the standard IGMP and interface (ifIndex) models used elsewhere in the FastPath stack. It is deployed on Layer 2/3 EdgeSwitches carrying IPTV, video conferencing, or other multicast application traffic in campus or enterprise networks, and administrators managing these switches typically start with an EdgeSwitch-MULTICAST-MIB download to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EdgeSwitch-MULTICAST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquiti EdgeSwitch managed switch

Monitoring Examples

An admin would poll a per-VLAN multicast group membership/forwarding table to see which ports are registered receivers for a given multicast address, and use the IGMP snooping enable flag to confirm the feature is active; a port still shown forwarding a multicast stream after its receiver left would reveal a stale IGMP leave/timeout condition causing unnecessary bandwidth use.

What Can Be Monitored

IGMP snooping enabled state
multicast group membership table
per-VLAN multicast forwarding entries
multicast routing protocol status

Imported Objects

From EdgeSwitch-REF-MIB

fastPath

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From PIM-BSR-MIB

pimBsrCandidateBSREntry

OBJECT-TYPE

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathMulticast	1.3.6.1.4.1.4413.1.1.4			The MIB definitions for Multicast Routing Flex package.
agentMulticastIGMPConfigGroup	1.3.6.1.4.1.4413.1.1.4.1
INT agentMulticastIGMPAdminMode	1.3.6.1.4.1.4413.1.1.4.1.1	INTEGER	read-write	This enables or disables IGMP on the system.
agentMulticastIGMPInterfaceTable	1.3.6.1.4.1.4413.1.1.4.1.2		not-accessible	Provides Per-Interface configuration of IGMP.
agentMulticastIGMPInterfaceEntry	1.3.6.1.4.1.4413.1.1.4.1.2.1		not-accessible	Information about a table entry.
I32 agentMulticastIGMPInterfaceIfIndex	1.3.6.1.4.1.4413.1.1.4.1.2.1.1	Integer32	read-only	Identifies the external interface number.
INT agentMulticastIGMPInterfaceAdminMode	1.3.6.1.4.1.4413.1.1.4.1.2.1.2	INTEGER	read-write	This enables or disables IGMP on this interface.
agentMulticastPIMConfigGroup	1.3.6.1.4.1.4413.1.1.4.2
INT agentMulticastPIMConfigMode	1.3.6.1.4.1.4413.1.1.4.2.1	INTEGER	read-write	This controls which PIM mode configuration the PIM-MIB displays.
agentMulticastPIMSMConfigGroup	1.3.6.1.4.1.4413.1.1.4.3
INT agentMulticastPIMSMAdminMode	1.3.6.1.4.1.4413.1.1.4.3.1	INTEGER	read-write	This enables or disables PIM Sparse Mode on the system.
agentMulticastPIMSMStaticRPTable	1.3.6.1.4.1.4413.1.1.4.3.2		not-accessible	Provides Per-Interface configuration of PIM-SM.
agentMulticastPIMSMStaticRPEntry	1.3.6.1.4.1.4413.1.1.4.3.2.1		not-accessible	Information about a table entry.
IP agentMulticastPIMSMStaticRPIpAddr	1.3.6.1.4.1.4413.1.1.4.3.2.1.1	IpAddress	not-accessible	IP Address of the RP.
IP agentMulticastPIMSMStaticRPGroupIpAddr	1.3.6.1.4.1.4413.1.1.4.3.2.1.2	IpAddress	not-accessible	Group IP Address supported by the RP.
IP agentMulticastPIMSMStaticRPGroupIpMask	1.3.6.1.4.1.4413.1.1.4.3.2.1.3	IpAddress	not-accessible	Group mask for the group IP Address.
ROW agentMulticastPIMSMStaticRPStatus	1.3.6.1.4.1.4413.1.1.4.3.2.1.4	RowStatus	read-create	Status of this entry in the Static RP Table. Allowed values are: active(1) - This entry is active destroy(6) - Setting an entry to this value removes the entry from the table.
agentMulticastPIMSMInterfaceTable	1.3.6.1.4.1.4413.1.1.4.3.3		not-accessible	Provides Per-Interface configuration of PIM-SM.
agentMulticastPIMSMInterfaceEntry	1.3.6.1.4.1.4413.1.1.4.3.3.1		not-accessible	Allows configuration of parameters not provided in the standard PIM-MIB.
U32 agentMulticastPIMSMInterfaceIndex	1.3.6.1.4.1.4413.1.1.4.3.3.1.1	Unsigned32	not-accessible	Routing Interface associated with this PIM SM configuration entry.
U32 agentMulticastPIMSMInterfaceCBSRHashMaskLength	1.3.6.1.4.1.4413.1.1.4.3.3.1.2	Unsigned32	read-write	The BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group.
I32 agentMulticastPIMSMInterfaceCRPPreference	1.3.6.1.4.1.4413.1.1.4.3.3.1.3	Integer32	read-write	The preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface.
agentPIMBsrCandidateConfTable	1.3.6.1.4.1.4413.1.1.4.3.4		not-accessible	Provides Candidate-BSR-Advertisements interval information.
agentPIMBsrCandidateConfEntry	1.3.6.1.4.1.4413.1.1.4.3.4.1		not-accessible	Information about a table entry.
U32 pimBsrCandidateBSRAdvInterval	1.3.6.1.4.1.4413.1.1.4.3.4.1.1	Unsigned32	read-write	A Candidate BSR generates Candidate-BSR-Advertisements periodically. This object represents the time interval in seconds between two consecutive advertisements.
agentMulticastPIMDMConfigGroup	1.3.6.1.4.1.4413.1.1.4.4
INT agentMulticastPIMDMAdminMode	1.3.6.1.4.1.4413.1.1.4.4.1	INTEGER	read-write	This enables or disables PIM Dense Mode on the system.
agentMulticastRoutingConfigGroup	1.3.6.1.4.1.4413.1.1.4.5
INT agentMulticastRoutingAdminMode	1.3.6.1.4.1.4413.1.1.4.5.1	INTEGER	read-write	This enables or disables Multicast Routing Mode on the system.
agentMulticastDVMRPConfigGroup	1.3.6.1.4.1.4413.1.1.4.6
INT agentMulticastDVMRPAdminMode	1.3.6.1.4.1.4413.1.1.4.6.1	INTEGER	read-write	This enables or disables DVMRP on the system.
agentSnmpTrapFlagsConfigGroupMulticast	1.3.6.1.4.1.4413.1.1.4.7
INT agentSnmpDVMRPTrapFlag	1.3.6.1.4.1.4413.1.1.4.7.1	INTEGER	read-write	This enables or disables DVMRP Traps on the system.
INT agentSnmpPIMTrapFlag	1.3.6.1.4.1.4413.1.1.4.7.2	INTEGER	read-write	This enables or disables PIM Traps on the system.
agentIpStaticMRouteTable	1.3.6.1.4.1.4413.1.1.4.8		not-accessible	The table listing the Static Multicast Route Entries.
agentIpStaticMRouteEntry	1.3.6.1.4.1.4413.1.1.4.8.1		not-accessible	Information about a table entry.
IPt agentIpStaticMRouteSrcAddressType	1.3.6.1.4.1.4413.1.1.4.8.1.1	InetAddressType	not-accessible	The address type of this Multicast data source.
IP agentIpStaticMRouteSrcIpAddr	1.3.6.1.4.1.4413.1.1.4.8.1.2	InetAddress	not-accessible	The address of the Multicast data source.
I32 agentIpStaticMRouteSrcNetMask	1.3.6.1.4.1.4413.1.1.4.8.1.3	Integer32	not-accessible	The network mask for the IP address of the Multicast data source.
IP agentIpStaticMRouteRpfIpAddr	1.3.6.1.4.1.4413.1.1.4.8.1.4	InetAddress	read-create	The RPF Address.
NUM agentIpStaticMRouteIfIndex	1.3.6.1.4.1.4413.1.1.4.8.1.5	InterfaceIndex	read-create	The interface index is valid only for IPv6 and only if RPF address is link-local.
I32 agentIpStaticMRoutePreference	1.3.6.1.4.1.4413.1.1.4.8.1.6	Integer32	read-create	The preference of this route entry.
ROW agentIpStaticMRouteStatus	1.3.6.1.4.1.4413.1.1.4.8.1.7	RowStatus	read-create	The preference of this route entry.

RFC description

Manages multicast routing including IGMP configuration on Ubiquiti EdgeSwitch platforms.

Start monitoring Ubiquiti EdgeSwitch managed switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EdgeSwitch-MULTICAST-MIB

What Is EdgeSwitch-MULTICAST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description