ENTERASYS-PIM-EXT-MIB

All MIBs › ENTERASYS-PIM-EXT-MIB

Organization: Enterasys Networks, Inc

Last Updated: 2009-02-24

Category: Technology: Multicast, Vendor: Enterasys/Cabletron

Description: Enterasys Networks PIM extension MIB providing additional PIM configuration and statistical monitoring objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ENTERASYS-PIM-EXT-MIB?

This Enterasys enterprise MIB extends RFC 5060's PIM-MIB with additional vendor-specific PIM (Protocol Independent Multicast) configuration and statistics for multicast routing interfaces. It exposes per-interface PIM administrative/operational status, neighbor counts, and detailed state-table statistics for (*,G) and (S,G) multicast forwarding states, including configured limits and warning thresholds. This is heavily monitoring-oriented: an admin can track etsysPimExtIfOperStatus to see if PIM is up on an interface, etsysPimExtIfNeighborCount to detect neighbor loss, and stored-state counters against configured limits/warning thresholds to catch multicast state table exhaustion before it causes dropped groups. It explicitly depends on and extends the IETF PIM-MIB (RFC 5060) for core PIM configuration. It is typically deployed on Enterasys switches/routers running multicast routing in enterprise or service-provider networks, and administrators can download the ENTERASYS-PIM-EXT-MIB file to load it into their SNMP management platform.

IPNetwork Monitor allows you to monitor SNMP objects defined in ENTERASYS-PIM-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Enterasys Networks switches/routers running PIM multicast routing

Monitoring Examples

Polling etsysPimExtIfTable entries for etsysPimExtIfOperStatus down while etsysPimExtIfAdminStatus is up reveals a PIM interface that failed to establish adjacency, and etsysPimExtIfP2PNoHellos would confirm missing Hello messages from a peer. Comparing etsysPimExtIfSGStateStored to etsysPimExtIfSGStateLimit and etsysPimExtIfSGStateWarnThold shows whether the router's (S,G) multicast state table is approaching capacity, which could cause new multicast streams to be dropped.

What Can Be Monitored

PIM interface admin/operational status
PIM neighbor count
stored (*,G) and (S,G) state counts
state table limits and warning thresholds
missing Hello message counts

Imported Objects

From ENTERASYS-MIB-NAMES

etsysModules

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetVersion

From PIM-STD-MIB

pimAnycastRPSetEntry	OBJECT-TYPE
pimGroupMappingEntry	OBJECT-TYPE
pimInterfaceEntry	OBJECT-TYPE
pimNeighborEntry	OBJECT-TYPE
pimStaticRPEntry	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using etsysPimExtNbrStatsNumRecvHello OID:

Select an Enterasys Networks switch (legacy, later Extreme Networks)/router (PIM multicast routing extensions) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type etsysPimExtNbrStatsNumRecvHello into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of valid PIM Hello messages that have been received from this neighbor. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT etsysPimExtAnycastRPSetAdminStatus	1.3.6.1.4.1.5624.1.2.67.1.2.3.1.1	INTEGER	read-create	The administrative state of this entry. When the status of this object is set to 'adminStatusDown', the router is removed from the corresponding anycast rendezvous point set. This MAY cause the TIB to be updated. When the status of this object is set to 'adminStatusUp', the router is added to the anycast rendezvous point and will start handling PIM messages. This MAY cause the TIB to be updated. Note: If the status is set to 'adminStatusDown' and the pimAnycastRPSetLocalRouter object is 'true' (this entry corresponds to the local router), the entire set is invalidated. The Anycast-RP Set is only valid if the local router is a member of the set.
etsysPimExtAnycastRPSetEntry	1.3.6.1.4.1.5624.1.2.67.1.2.3.1		not-accessible	An entry (conceptual row) in the etsysPimExtAnycastRPSetTable.
etsysPimExtAnycastRPSetGroup	1.3.6.1.4.1.5624.1.2.67.3.1.3			This group defines the anycast rendezvous point controls for Enterasys PIM systems.
etsysPimExtAnycastRPSetTable	1.3.6.1.4.1.5624.1.2.67.1.2.3		not-accessible	This table provides additional information pertaining to PIM anycast rendezvous point sets for Enterasys PIM systems. This table augments the pimAnycastRPSetTable from RFC 5060.
etsysPimExtCompliance	1.3.6.1.4.1.5624.1.2.67.3.2.1			The compliance statement for devices that support etsysPimExt.
etsysPimExtCompliances	1.3.6.1.4.1.5624.1.2.67.3.2
etsysPimExtConformance	1.3.6.1.4.1.5624.1.2.67.3
etsysPimExtGlobals	1.3.6.1.4.1.5624.1.2.67.1.1
etsysPimExtGroupMappingEntry	1.3.6.1.4.1.5624.1.2.67.1.2.4.1		not-accessible	An entry (conceptual row) in the etsysPimExtGroupMappingTable.
etsysPimExtGroupMappingGroup	1.3.6.1.4.1.5624.1.2.67.3.1.4			This group defines the group mapping controls for Enterasys PIM systems.
T/F etsysPimExtGroupMappingIsInactive	1.3.6.1.4.1.5624.1.2.67.1.2.4.1.1	TruthValue	read-only	Indicates whether this Group Mapping is currently inactive. If this flag is set to 'true' then this group mapping is currently not in use. In other words, no group addresses will be matched to this Group Mapping.
etsysPimExtGroupMappingTable	1.3.6.1.4.1.5624.1.2.67.1.2.4		not-accessible	This table provides additional information pertaining to PIM group mapping for Enterasys PIM systems. This table augments the pimGroupMappingTable from RFC 5060.
etsysPimExtGroups	1.3.6.1.4.1.5624.1.2.67.3.1
INT etsysPimExtIfAdminStatus	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.1	INTEGER	read-create	The administrative state of PIM on this interface. When the status of this object is set to 'adminStatusDown', no PIM messages will be sent or received on this interface. The TIB state pertaining to this interface is cleared, resulting in the removal of the associated routes from the MFIB. When the status of this object is set to 'adminStatusUp', normal PIM operation will proceed, and multicast state is stored in the TIB when it is learned.
U32 etsysPimExtIfAssertHoldtime	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.12	Unsigned32	read-create	The interval before this router leaves assert loser state on this interface, unless it receives a PIM Assert message that refreshes this state. This object corresponds to the 'Assert_Time' timer value defined in PIM-SM [RFC 4601]. Note: Configuring different values for this object for different routers on the same interface may lead to incorrect protocol operation.
U32 etsysPimExtIfAssertInterval	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.11	Unsigned32	read-create	The frequency at which this router sends PIM Assert messages on this interface when it is the assert winner. This object corresponds to the 'Assert_Time' (180 seconds) minus the 'Assert_Override_Interval' (3 seconds) defined in PIM-SM [RFC 4601]. This value MUST be less than etsysPimExtIfAssertHoldtime.
etsysPimExtIfEntry	1.3.6.1.4.1.5624.1.2.67.1.2.1.1		not-accessible	An entry (conceptual row) in the etsysPimExtIfTable.
etsysPimExtIfGroup	1.3.6.1.4.1.5624.1.2.67.3.1.1			This group defines interface controls for Enterasys PIM systems.
G32 etsysPimExtIfNeighborCount	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.4	Gauge32	read-only	The number of PIM neighbors on this interface.
INT etsysPimExtIfOperStatus	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.2	INTEGER	read-only	The current operational state of PIM on this interface.
T/F etsysPimExtIfP2PNoHellos	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.3	TruthValue	read-create	Indicates whether this interface is a point-to-point interface. If the value of this object is 'true', neighbors are not required to send PIM-Hello messages. This is provided for backward-compatibility with some older implementations that do not send PIM-Hellos on point-to-point links. Changing the value of this object while the interface is operationally active MAY cause the interface to be deactivated and then reactivated.
U32 etsysPimExtIfSGStateLimit	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.8	Unsigned32	read-create	The maximum number of {source, group} pairs for which the PIM TIB Manager is allowed to store (S,G,I) state specific to this interface. A value of zero means that there is no limit.
G32 etsysPimExtIfSGStateStored	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.10	Gauge32	read-only	The number of {source, group} pairs for which the PIM TIB Manager is storing (S,G,I) state specific to this interface.
U32 etsysPimExtIfSGStateWarnThold	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.9	Unsigned32	read-create	The PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing (S,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold.
U32 etsysPimExtIfStarGStateLimit	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.5	Unsigned32	read-create	The maximum number of groups for which the PIM TIB Manager is allowed to store (*,G,I) state specific to this interface. A value of zero means that there is no limit.
G32 etsysPimExtIfStarGStateStored	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.7	Gauge32	read-only	The number of groups for which the PIM TIB Manager is storing (*,G,I) state specific to this interface.
U32 etsysPimExtIfStarGStateWarnThold	1.3.6.1.4.1.5624.1.2.67.1.2.1.1.6	Unsigned32	read-create	The PIM TIB Manager logs an exception if the number of groups for which it is storing (*,G,I) state specific to this interface exceeds this value. A value of zero means that there is no warning threshold.
etsysPimExtIfStatsEntry	1.3.6.1.4.1.5624.1.2.67.1.2.6.1		not-accessible	An entry (conceptual row) in the etsysPimExtIfStatsTable.
etsysPimExtIfStatsGroup	1.3.6.1.4.1.5624.1.2.67.3.1.6			This group defines the interface statistic objects for Enterasys PIM systems.
C32 etsysPimExtIfStatsNumErrHello	1.3.6.1.4.1.5624.1.2.67.1.2.6.1.5	Counter32	read-only	The number of PIM Hello messages that have been received on this interface that have contained errors.
C32 etsysPimExtIfStatsNumRecvUnknownNbr	1.3.6.1.4.1.5624.1.2.67.1.2.6.1.6	Counter32	read-only	The number of PIM Join/Prune, Assert and multicast Bootstrap Router messages that have been received on this interface from a neighbor in which we had not previously received a valid PIM Hello message (and for which etsysPimExtIfP2PNoHellos was 'false'). Bootstrap Router messages which are sent to a unicast address are not included in this count.
C32 etsysPimExtIfStatsNumSentAssert	1.3.6.1.4.1.5624.1.2.67.1.2.6.1.3	Counter32	read-only	The number of PIM Assert messages that have been sent out this interface.
C32 etsysPimExtIfStatsNumSentBsm	1.3.6.1.4.1.5624.1.2.67.1.2.6.1.4	Counter32	read-only	The number of PIM Bootstrap Router messages that have been sent out this interface. PIM always multicasts this type of message.
C32 etsysPimExtIfStatsNumSentHello	1.3.6.1.4.1.5624.1.2.67.1.2.6.1.1	Counter32	read-only	The number of PIM Hello messages that have been sent out this interface.
C32 etsysPimExtIfStatsNumSentJoinPrune	1.3.6.1.4.1.5624.1.2.67.1.2.6.1.2	Counter32	read-only	The number of PIM Join/Prune messages that have been sent out this interface.
C32 etsysPimExtIfStatsNumUnknownHelloOpt	1.3.6.1.4.1.5624.1.2.67.1.2.6.1.7	Counter32	read-only	The number of unknown options that have been received in PIM Hello messages on this interface.
etsysPimExtIfStatsTable	1.3.6.1.4.1.5624.1.2.67.1.2.6		not-accessible	This table provides additional information pertaining to PIM interface statistics for Enterasys PIM systems. This table augments the pimInterfaceTable.
etsysPimExtIfTable	1.3.6.1.4.1.5624.1.2.67.1.2.1		not-accessible	This table provides additional information pertaining to PIM interfaces for Enterasys PIM systems. This table augments the pimInterfaceTable from RFC 5060.
etsysPimExtMIB	1.3.6.1.4.1.5624.1.2.67			This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to the PIM configuration. This MIB was designed to be used in conjunction with the PIM-MIB (RFC 5060) for configuring the PIM protocol parameters. Additional statistical tables are provided for monitoring the PIM protocol.
T/F etsysPimExtNbrMgrAcceptUnicastBsms	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.3	TruthValue	read-write	Indicates whether the PIM Neighbor manager accepts PIM Boostrap Messages (BSMs) which are sent as unicast messages. Setting the value of this object to 'false' means that BSMs are ignored if they are sent as unicast messages. This object can only be set to 'true' if the etsysPimExtNbrMgrEnableUnicastMessages object is 'true'.
T/F etsysPimExtNbrMgrEnableUnicastMessages	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.2	TruthValue	read-write	Indicates whether the PIM Neighbor Manager sends and receives unicast PIM messages. This object MUST only be set to 'false' if the local router will never be an RP for any multicast group, and it will never be the downstream router for any connected source that sends data to any ASM group. This will always be the case if the local router only performs the SSM subset of PIM-SM.
etsysPimExtNbrMgrEntry	1.3.6.1.4.1.5624.1.2.67.1.2.7.1		not-accessible	An entry (conceptual row) in the etsysPimExtNbrMgrTable.
etsysPimExtNbrMgrGroup	1.3.6.1.4.1.5624.1.2.67.3.1.7			This group defines the neighbor manager objects for Enterasys PIM systems.
INE etsysPimExtNbrMgrIndex	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.1	InetVersion	not-accessible	The Internet address version of this Neighbor Manager.
C32 etsysPimExtNbrMgrNumErrCRPAdvert	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.10	Counter32	read-only	The number of received PIM Candidate-RP Advertisement messages that have contained errors.
C32 etsysPimExtNbrMgrNumErrRegister	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.11	Counter32	read-only	The number of received PIM Register messages that have contained errors.
C32 etsysPimExtNbrMgrNumErrRegisterStop	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.12	Counter32	read-only	The number of received PIM Register-Stop messages that have contained errors.
C32 etsysPimExtNbrMgrNumRecvBadChecksum	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.16	Counter32	read-only	The number of received PIM messages with an incorrect PIM checksum that.
C32 etsysPimExtNbrMgrNumRecvBadLength	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.17	Counter32	read-only	The number of received PIM messages with a length too short to contain a common PIM header.
C32 etsysPimExtNbrMgrNumRecvCRPAdvert	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.7	Counter32	read-only	The number of valid PIM Candidate-RP Advertisement messages that have been received.
C32 etsysPimExtNbrMgrNumRecvIgnoredType	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.13	Counter32	read-only	The number of received PIM messages with a known but unsupported PIM message type.
C32 etsysPimExtNbrMgrNumRecvRegister	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.8	Counter32	read-only	The number of valid PIM Register messages that have been received.
C32 etsysPimExtNbrMgrNumRecvRegisterStop	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.9	Counter32	read-only	The number of valid PIM Register-Stop messages that have been received.
C32 etsysPimExtNbrMgrNumRecvUnknownType	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.14	Counter32	read-only	The number of received PIM messages with an unknown PIM message type.
C32 etsysPimExtNbrMgrNumRecvUnknownVer	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.15	Counter32	read-only	The number of received PIM messages with an unknown PIM version.
C32 etsysPimExtNbrMgrNumSentCRPAdvert	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.4	Counter32	read-only	The number of PIM Candidate-RP-Advertisement messages that have been sent.
C32 etsysPimExtNbrMgrNumSentRegister	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.5	Counter32	read-only	The number of PIM Register messages that have been sent Note: This only includes PIM Register messages forwarded to other members of Anycast-RP sets, and Null-Register messages. It does not include Register-encapsulated data packets sent from the downstream router to the RP.
C32 etsysPimExtNbrMgrNumSentRegisterStop	1.3.6.1.4.1.5624.1.2.67.1.2.7.1.6	Counter32	read-only	The number of PIM Register-Stop messages that have been sent.
etsysPimExtNbrMgrTable	1.3.6.1.4.1.5624.1.2.67.1.2.7		not-accessible	This table provides objects that manipulate the operation of PIM in order to accept additional types of messages. Statistical objects are provided as well.
etsysPimExtNbrStatsEntry	1.3.6.1.4.1.5624.1.2.67.1.2.5.1		not-accessible	An entry (conceptual row) in the etsysPimExtNbrStatsTable.
etsysPimExtNbrStatsGroup	1.3.6.1.4.1.5624.1.2.67.3.1.5			This group defines the neighbor statistic objects for Enterasys PIM systems.
C32 etsysPimExtNbrStatsNumErrAssert	1.3.6.1.4.1.5624.1.2.67.1.2.5.1.6	Counter32	read-only	The number of PIM Assert messages that have been received from this neighbor that have contained errors.
C32 etsysPimExtNbrStatsNumErrBSM	1.3.6.1.4.1.5624.1.2.67.1.2.5.1.7	Counter32	read-only	The number of PIM Bootstrap messages that have been received from this neighbor that have contained errors.
C32 etsysPimExtNbrStatsNumErrJoinPrune	1.3.6.1.4.1.5624.1.2.67.1.2.5.1.5	Counter32	read-only	The number of PIM Join/Prune messages that have been received from this neighbor that have contained errors. Note: This does not include messages for which the RP in the message differs from the RP known by the local router, nor does it include (*,G) messages received for SSM groups.
C32 etsysPimExtNbrStatsNumRecvAssert	1.3.6.1.4.1.5624.1.2.67.1.2.5.1.3	Counter32	read-only	The number of valid PIM Assert messages that have been received from this neighbor.
C32 etsysPimExtNbrStatsNumRecvBSM	1.3.6.1.4.1.5624.1.2.67.1.2.5.1.4	Counter32	read-only	The number of valid PIM Bootstrap messages that have been received from this neighbor.
C32 etsysPimExtNbrStatsNumRecvHelloEx	1.3.6.1.4.1.5624.1.2.67.1.2.5.1.1	Counter32	read-only	The number of valid PIM Hello messages that have been received from this neighbor.
C32 etsysPimExtNbrStatsNumRecvJoinPrune	1.3.6.1.4.1.5624.1.2.67.1.2.5.1.2	Counter32	read-only	The number of valid PIM Join/Prune messages that have been received from this neighbor.
etsysPimExtNbrStatsTable	1.3.6.1.4.1.5624.1.2.67.1.2.5		not-accessible	This table provides additional information pertaining to PIM neighbor statistics for Enterasys PIM systems. This table augments the pimNeighborTable. Note: If a Neighbor expires and is removed from the pimNeighborTable and is reconnected shortly thereafter, these statistics are reset due to the row deletion. The statistics MAY also reset on receipt of a PIM Hello message with a zero holdtime.
etsysPimExtObjects	1.3.6.1.4.1.5624.1.2.67.1
INT etsysPimExtStaticRPAdminStatus	1.3.6.1.4.1.5624.1.2.67.1.2.2.1.1	INTEGER	read-create	The administrative state of this entry. When the status of this object is set to 'adminStatusDown', the static rendezvous point will no longer accept PIM messages and is removed from the pimGroupMappingTable. This MAY cause the TIB to be updated. When the status of this object is set to 'adminStatusUp', this static rendezvous point is added to the pimGroupMappingTable and will start accepting PIM messages. This MAY cause the TIB to be updated.
etsysPimExtStaticRPEntry	1.3.6.1.4.1.5624.1.2.67.1.2.2.1		not-accessible	An entry (conceptual row) in the etsysPimExtStaticRPTable.
etsysPimExtStaticRPGroup	1.3.6.1.4.1.5624.1.2.67.3.1.2			This group defines the static rendezvous point controls for Enterasys PIM systems.
etsysPimExtStaticRPTable	1.3.6.1.4.1.5624.1.2.67.1.2.2		not-accessible	This table provides additional information pertaining to PIM static rendezvous points for Enterasys PIM systems. This table augments the pimStaticRPTable from RFC 5060.
etsysPimExtTables	1.3.6.1.4.1.5624.1.2.67.1.2
etsysPimExtTibMgrEntry	1.3.6.1.4.1.5624.1.2.67.1.2.8.1		not-accessible	An entry (conceptual row) in the etsysPimExtTibMgrTable.
etsysPimExtTibMgrGroup	1.3.6.1.4.1.5624.1.2.67.3.1.8			This group defines the Tree Information Base (TIB) manager objects for Enterasys PIM systems.
U32 etsysPimExtTibMgrGStateLimit	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.2	Unsigned32	read-write	The maximum number of groups for which the PIM TIB Manager is allowed to store non-interface specific (*,G) and/or (S,G) state. A value of zero means that there is no limit.
G32 etsysPimExtTibMgrGStateStored	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.4	Gauge32	read-only	The number of groups for which the PIM TIB Manager is storing non-interface specific (*,G) and/or (S,G) state.
U32 etsysPimExtTibMgrGStateWarnThold	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.3	Unsigned32	read-write	The PIM TIB Manager logs an exception if the number of groups for which it is storing non-interface specific (*,G) and/or (S,G) state exceeds this value. A value of zero means that there is no warning threshold.
INE etsysPimExtTibMgrIndex	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.1	InetVersion	not-accessible	The Internet address version of this PIM TIB Manager.
U32 etsysPimExtTibMgrKeepalivePeriod	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.16	Unsigned32	read-write	The amount of time to keep (S,G) state alive in the absence of PIM (S,G) Join messages, (S,G) local membership or (S,G) data packets. This object corresponds to the 'Keepalive_Period' defined in PIM-SM [RFC 4601]. Note: Configuring different values for this object for different routers in the PIM domain may lead to incorrect protocol operation.
U32 etsysPimExtTibMgrRegProbeTime	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.15	Unsigned32	read-write	The time to wait for a PIM Register-Stop message after sending a PIM Null-Register message, before resuming Register-encapsulation at a downstream router. This object corresponds to the 'Register_Probe_Time' defined in PIM-SM [RFC 4601].
U32 etsysPimExtTibMgrRegSuppressionTime	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.14	Unsigned32	read-write	The mean value of the randomized interval during which a downstream router stops Register-encapsulation after receiving a PIM Register-Stop message. This object corresponds to the 'Register_Suppression_Time' defined in PIM-SM [RFC 4601]. Note: Configuring different values for this object for different routers in the PIM domain may lead to incorrect protocol operation.
U32 etsysPimExtTibMgrSGIStateLimit	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.11	Unsigned32	read-write	The maximum number of {source, group, interface} triplets for which the PIM TIB Manager is allowed to store (S,G,I) state. A value of zero means that there is no limit.
G32 etsysPimExtTibMgrSGIStateStored	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.13	Gauge32	read-only	The number of {source, group, interface} triplets for which the PIM TIB Manager is storing (S,G,I) state.
U32 etsysPimExtTibMgrSGIStateWarnThold	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.12	Unsigned32	read-write	The PIM TIB Manager logs an exception if the number of {source, group, interface} triplets for which it is storing (S,G,I) state exceeds this value. A value of zero means that there is no warning threshold.
U32 etsysPimExtTibMgrSGStateLimit	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.5	Unsigned32	read-write	The maximum number of {source, group} pairs for which the PIM TIB Manager is allowed to store non-interface specific (S,G) state. A value of zero means that there is no limit.
G32 etsysPimExtTibMgrSGStateStored	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.7	Gauge32	read-only	The number of {source, group} pairs for which the PIM TIB Manager is storing non-interface specific (S,G) state.
U32 etsysPimExtTibMgrSGStateWarnThold	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.6	Unsigned32	read-write	The PIM TIB Manager logs an exception if the number of {source, group} pairs for which it is storing non-interface specific (S,G) state exceeds this value. A value of zero means that there is no warning threshold.
U32 etsysPimExtTibMgrStarGIStateLimit	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.8	Unsigned32	read-write	The maximum number of {group, interface} pairs for which the PIM TIB Manager is allowed to store (*,G,I) state. A value of zero means that there is no limit.
G32 etsysPimExtTibMgrStarGIStateStored	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.10	Gauge32	read-only	The number of {group, interface} pairs for which the PIM TIB Manager is storing (*,G,I) state.
U32 etsysPimExtTibMgrStarGIStateWarnThold	1.3.6.1.4.1.5624.1.2.67.1.2.8.1.9	Unsigned32	read-write	The PIM TIB Manager logs an exception if the number of {group, interface} pairs for which it is storing (*,G,I) state exceeds this value. A value of zero means that there is no warning threshold.
etsysPimExtTibMgrTable	1.3.6.1.4.1.5624.1.2.67.1.2.8		not-accessible	This table provides objects that manipulate the operation of the PIM Tree Information Base (TIB) Manager in order control the acceptable limits for the TIB.

RFC description

Enterasys PIM Extension MIB provides extended management objects for PIM (Protocol Independent Multicast) on Enterasys network switches.

Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (PIM multicast routing extensions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ENTERASYS-PIM-EXT-MIB