| OID symbolic | OID numeric | Type | Access | Description |
|---|
| pimBsrMIB | 1.3.6.1.2.1.172 | | | The MIB module for management of the Bootstrap Router
(BSR) mechanism for PIM routers.
Copyright (C) The IETF Trust (2008). This version
of this MIB module is part of RFC 5240; see the RFC
itself for full legal notices. |
| pimBsrNotifications | 1.3.6.1.2.1.172.0 | | | |
| NTF pimBsrElectedBSRLostElection | 1.3.6.1.2.1.172.0.1 | | | A pimBsrElectedBSRLostElection notification should be
generated when current E-BSR lost election to a new
Candidate-BSR. Only an E-BSR should generate this
notification.
This notification is generated when
pimBsrCandidateBSRElectedBSR becomes FALSE. |
| NTF pimBsrCandidateBSRWinElection | 1.3.6.1.2.1.172.0.2 | | | A pimBsrCandidateBSRWinElection notification should be
generated when a C-BSR wins BSR Election. Only an
E-BSR should generate this notification.
This notification is generated when
pimBsrCandidateBSRElectedBSR becomes TRUE. |
| pimBsrObjects | 1.3.6.1.2.1.172.1 | | | |
| pimBsrCandidateRPTable | 1.3.6.1.2.1.172.1.1 | | not-accessible | The (conceptual) table listing the IP multicast group
prefixes for which the local router is to advertise
itself as a Candidate-RP. |
| pimBsrCandidateRPEntry | 1.3.6.1.2.1.172.1.1.1 | | not-accessible | An entry (conceptual row) in the
pimBsrCandidateRPTable. |
| IPt pimBsrCandidateRPAddressType | 1.3.6.1.2.1.172.1.1.1.1 | InetAddressType | not-accessible | The Inet address type of the Candidate-RP. |
| IP pimBsrCandidateRPAddress | 1.3.6.1.2.1.172.1.1.1.2 | InetAddress | not-accessible | The (unicast) address that will be advertised as a
Candidate-RP. The InetAddressType is given by the
pimBsrCandidateRPAddressType object. |
| IP pimBsrCandidateRPGroupAddress | 1.3.6.1.2.1.172.1.1.1.3 | InetAddress | not-accessible | The IP multicast group address that, when combined with
the corresponding value of
pimBsrCandidateRPGroupPrefixLength, identifies a group
prefix for which the local router will advertise itself
as a Candidate-RP. The InetAddressType is given by the
pimBsrCandidateRPAddressType object.
This address object is only significant up to
pimBsrCandidateRPGroupPrefixLength bits. The
remainder of the address bits are zero. This is
especially important for this field, which is part of
the index of this entry. Any non-zero bits would
signify an entirely different entry. |
| ADR pimBsrCandidateRPGroupPrefixLength | 1.3.6.1.2.1.172.1.1.1.4 | InetAddressPrefixLength | not-accessible | The multicast group address mask that, when combined
with the corresponding value of
pimBsrCandidateRPGroupAddress, identifies a group prefix
for which the local router will advertise itself as a
Candidate-RP. The InetAddressType is given by the
pimBsrCandidateRPAddressType object. |
| T/F pimBsrCandidateRPBidir | 1.3.6.1.2.1.172.1.1.1.5 | TruthValue | read-create | If this object is set to TRUE, this group range is
advertised with this RP as a BIDIR-PIM group range. If
it is set to FALSE, it is advertised as a PIM-SM group
range. |
| TIK pimBsrCandidateRPAdvTimerEx | 1.3.6.1.2.1.172.1.1.1.6 | TimeTicks | read-only | The time remaining before the local router next sends
a Candidate-RP-Advertisement to the elected BSR for
this zone. |
| U32 pimBsrCandidateRPPriority | 1.3.6.1.2.1.172.1.1.1.7 | Unsigned32 | read-create | The priority for this Candidate-RP advertised in
Candidate-RP-Advertisements. |
| U32 pimBsrCandidateRPAdvInterval | 1.3.6.1.2.1.172.1.1.1.8 | Unsigned32 | read-create | A Candidate-RP generates Candidate-RP-Advertisements
periodically. This object represents the time interval
in seconds between two consecutive advertisements. |
| U32 pimBsrCandidateRPHoldtime | 1.3.6.1.2.1.172.1.1.1.9 | Unsigned32 | read-create | Holdtime for this Candidate-RP. The amount of time (in
seconds) this Candidate-RP entry is valid.
This object's value can be zero only when this C-RP is
shutting down. |
| ROW pimBsrCandidateRPStatus | 1.3.6.1.2.1.172.1.1.1.10 | RowStatus | read-create | The status of this row, by which new entries may be
created, or old entries deleted from this table.
This status object can be set to active(1) without
setting any other columnar objects in this entry.
All writable objects in this entry can be modified
when the status of this entry is active(1). |
| STO pimBsrCandidateRPStorageType | 1.3.6.1.2.1.172.1.1.1.11 | StorageType | read-create | The storage type for this row. Rows having the value
'permanent' need not allow write-access to any columnar
objects in the row. |
| pimBsrElectedBSRRPSetTable | 1.3.6.1.2.1.172.1.2 | | not-accessible | The (conceptual) table listing BSR-specific information
about PIM group mappings learned via C-RP advertisements
or created locally using configurations. This table is
maintained only on the Elected BSR.
An Elected BSR uses this table to create Bootstrap
messages after applying a local policy to include some
or all of the group mappings in this table. |
| pimBsrElectedBSRRPSetEntry | 1.3.6.1.2.1.172.1.2.1 | | not-accessible | An entry (conceptual row) in the
pimBsrElectedBSRRPSetTable. |
| IPt pimBsrElectedBSRGrpMappingAddrType | 1.3.6.1.2.1.172.1.2.1.2 | InetAddressType | not-accessible | The Inet address type of the IP multicast group
prefix. |
| IP pimBsrElectedBSRGrpMappingGrpAddr | 1.3.6.1.2.1.172.1.2.1.3 | InetAddress | not-accessible | The IP multicast group address that, when combined
with pimBsrElectedBSRGrpMappingGrpPrefixLen, gives the
group prefix for this mapping. The InetAddressType is
given by the pimBsrElectedBSRGrpMappingAddrType object.
This address object is only significant up to
pimBsrElectedBSRGrpMappingGrpPrefixLen bits. The
remainder of the address bits are zero. This is
especially important for this field, which is part of
the index of this entry. Any non-zero bits would
signify an entirely different entry. |
| ADR pimBsrElectedBSRGrpMappingGrpPrefixLen | 1.3.6.1.2.1.172.1.2.1.4 | InetAddressPrefixLength | not-accessible | The multicast group prefix length that, when combined
with pimBsrElectedBSRGrpMappingGrpAddr, gives the group
prefix for this mapping. The InetAddressType is given by
the pimBsrElectedBSRGrpMappingAddrType object. If
pimBsrElectedBSRGrpMappingAddrType is 'ipv4' or 'ipv4z',
this object must be in the range 4..32. If
pimBsrElectedBSRGrpMappingAddrType is 'ipv6' or 'ipv6z',
this object must be in the range 8..128. |
| IP pimBsrElectedBSRGrpMappingRPAddr | 1.3.6.1.2.1.172.1.2.1.5 | InetAddress | not-accessible | The IP address of the RP to be used for groups within
this group prefix. The InetAddressType is given by the
pimBsrElectedBSRGrpMappingAddrType object. |
| U32 pimBsrElectedBSRRPSetPriority | 1.3.6.1.2.1.172.1.2.1.6 | Unsigned32 | read-only | The priority for RP. Numerically higher values for
this object indicate lower priorities, with the value
zero denoting the highest priority. |
| U32 pimBsrElectedBSRRPSetHoldtime | 1.3.6.1.2.1.172.1.2.1.7 | Unsigned32 | read-only | The holdtime for RP |
| TIK pimBsrElectedBSRRPSetExpiryTime | 1.3.6.1.2.1.172.1.2.1.8 | TimeTicks | read-only | The minimum time remaining before this entry will be
aged out. The value zero indicates that this entry will
never be aged out. |
| T/F pimBsrElectedBSRRPSetGrpBidir | 1.3.6.1.2.1.172.1.2.1.9 | TruthValue | read-only | If this object is TRUE, this group range with this
RP is a BIDIR-PIM group range. If it is set to FALSE,
it is a PIM-SM group range. |
| pimBsrCandidateBSRTable | 1.3.6.1.2.1.172.1.3 | | not-accessible | The (conceptual) table containing Candidate-BSR
configuration for the local router. The table contains
one row for each zone for which the local router is
to advertise itself as a Candidate-BSR. |
| pimBsrCandidateBSREntry | 1.3.6.1.2.1.172.1.3.1 | | not-accessible | An entry (conceptual row) in the
pimBsrCandidateBSRTable. |
| INE pimBsrCandidateBSRZoneIndex | 1.3.6.1.2.1.172.1.3.1.1 | InetZoneIndex | not-accessible | The zone index uniquely identifies the zone on a
device to which this Candidate-BSR is attached. There is
one entry for each zone in ipMcastZoneTable. Scope-level
information for this zone can be extracted from
ipMcastZoneTable in IP Multicast MIB [RFC5132].
Zero is a special value used to request the default zone
for a given scope. Zero is not a valid value for this
object. |
| IPt pimBsrCandidateBSRAddressType | 1.3.6.1.2.1.172.1.3.1.2 | InetAddressType | read-create | The address type of the Candidate-BSR. |
| IP pimBsrCandidateBSRAddress | 1.3.6.1.2.1.172.1.3.1.3 | InetAddress | read-create | The (unicast) address that the local router will
use to advertise itself as a Candidate-BSR. The
InetAddressType is given by the
pimBsrCandidateBSRAddressType object. |
| U32 pimBsrCandidateBSRPriority | 1.3.6.1.2.1.172.1.3.1.4 | Unsigned32 | read-create | The priority value for the local router as a
Candidate-BSR for this zone. Numerically higher
values for this object indicate higher priorities. |
| U32 pimBsrCandidateBSRHashMaskLength | 1.3.6.1.2.1.172.1.3.1.5 | Unsigned32 | read-create | The hash mask length (used in the RP hash function)
that the local router will advertise in its Bootstrap
messages for this zone. This object defaults
to 30 if pimBsrCandidateBSRAddressType is 'ipv4' or
'ipv4z' , and defaults to 126 if
pimBsrCandidateBSRAddressType is 'ipv6' or 'ipv6z'. |
| T/F pimBsrCandidateBSRElectedBSR | 1.3.6.1.2.1.172.1.3.1.6 | TruthValue | read-only | Whether the local router is the elected BSR for this
zone. |
| TIK pimBsrCandidateBSRBootstrapTimer | 1.3.6.1.2.1.172.1.3.1.7 | TimeTicks | read-only | The time remaining before the local router next
originates a Bootstrap message for this zone.
Value of this object is zero if
pimBsrCandidateBSRElectedBSR is 'FALSE'. |
| ROW pimBsrCandidateBSRStatus | 1.3.6.1.2.1.172.1.3.1.8 | RowStatus | read-create | The status of this row, by which new entries may
be created or old entries deleted from this table.
This status object can be set to active(1) without
setting any other columnar objects in this entry.
All writable objects in this entry can be modified
when the status of this entry is active(1). |
| STO pimBsrCandidateBSRStorageType | 1.3.6.1.2.1.172.1.3.1.9 | StorageType | read-create | The storage type for this row. Rows having the value
'permanent' need not allow write-access to any columnar
objects in the row. |
| pimBsrElectedBSRTable | 1.3.6.1.2.1.172.1.4 | | not-accessible | The (conceptual) table containing information about
elected BSRs. The table contains one row for each
zone for which there is an elected BSR. |
| pimBsrElectedBSREntry | 1.3.6.1.2.1.172.1.4.1 | | not-accessible | An entry (conceptual row) in the
pimBsrElectedBSRTable. |
| INE pimBsrElectedBSRZoneIndex | 1.3.6.1.2.1.172.1.4.1.1 | InetZoneIndex | not-accessible | The zone index uniquely identifies the zone on a
device to which this Elected BSR is attached. There
is one entry for each zone in ipMcastZoneTable.
Scope-level information for this zone can be extracted
from ipMcastZoneTable in IP Multicast MIB [RFC5132].
Zero is a special value used to request the default zone
for a given scope. Zero is not a valid value for this
object. |
| IPt pimBsrElectedBSRAddressType | 1.3.6.1.2.1.172.1.4.1.2 | InetAddressType | read-only | The address type of the elected BSR. |
| IP pimBsrElectedBSRAddress | 1.3.6.1.2.1.172.1.4.1.3 | InetAddress | read-only | The (unicast) address of the elected BSR. The
InetAddressType is given by the
pimBsrElectedBSRAddressType object. |
| U32 pimBsrElectedBSRPriority | 1.3.6.1.2.1.172.1.4.1.4 | Unsigned32 | read-only | The priority value for the elected BSR for this address
type. Numerically higher values for this object indicate
higher priorities. |
| U32 pimBsrElectedBSRHashMaskLength | 1.3.6.1.2.1.172.1.4.1.5 | Unsigned32 | read-only | The hash mask length (used in the RP hash function)
advertised by the elected BSR for this zone. |
| TIK pimBsrElectedBSRExpiryTime | 1.3.6.1.2.1.172.1.4.1.6 | TimeTicks | read-only | The minimum time remaining before the elected BSR for
this zone will be declared down. |
| pimBsrConformance | 1.3.6.1.2.1.172.2 | | | |
| pimBsrCompliances | 1.3.6.1.2.1.172.2.1 | | | |
| pimBsrCompliance | 1.3.6.1.2.1.172.2.1.1 | | | The compliance statement for PIM routers that implement
the Bootstrap Router (BSR) mechanism. |
| pimBsrGroups | 1.3.6.1.2.1.172.2.2 | | | |
| pimBsrObjectGroup | 1.3.6.1.2.1.172.2.2.1 | | | A collection of objects for managing the Bootstrap
Router (BSR) mechanism for PIM routers. |
| pimBsrDiagnosticsGroup | 1.3.6.1.2.1.172.2.2.2 | | | Objects providing additional diagnostics related to
the Bootstrap Router (BSR) mechanism for PIM routers. |
