EXCEL4-SWITCH-MIB

All MIBs › EXCEL4-SWITCH-MIB

Organization: Excel Switching Corporation

Last Updated: 000118

Category: Device Management, Technology: Switching/L2, Vendor: Allied Telesis

Description: Provides SNMP management for Excel4 series managed Ethernet switches including port and VLAN control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EXCEL4-SWITCH-MIB?

EXCEL4-SWITCH-MIB is a Lucent Technologies vendor MIB for the Excel4 series of managed telecom/networking switches, registered under Lucent's product OID arc. It exposes node identification and location data, current node time, and per-node communications card (excelCommCardTable) inventory across a multi-node switch system. It supports monitoring hardware status by tracking each node's logical and physical identifiers, communications card presence, and node-level clock synchronization, useful for detecting misconfigured or missing cards and clock drift across nodes. No explicit dependency on IETF standard MIBs is apparent from the object names, suggesting a largely self-contained proprietary structure. It would have been deployed in telecom central office or enterprise environments using Lucent Excel4 switching platforms with multiple interconnected nodes. Engineers can download the EXCEL4-SWITCH-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EXCEL4-SWITCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lucent Excel4 series switch

Monitoring Examples

An administrator would poll excelNodeTable/excelNodeEntry indexed by excelNodeIndex to retrieve excelNodeLogicalID and excelNodePhysicalID for each node, confirming expected nodes are present in the system. excelNodeCurrentTime would be checked across nodes to detect clock drift, and excelCommCardTable/excelCommCardEntry would be walked to verify all expected communications cards are installed and recognized. excelNodeLocationIdentifier helps correlate a reported fault with the node's physical location.

What Can Be Monitored

node identification (logical/physical ID)
node location
node current time/clock sync
communications card inventory

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
enterprises

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
ObjectName
snmpModules

From SNMPv2-TC

RowStatus
TestAndIncr
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using excelSpanBipolarViolation OID:

Select a Lucent Excel4 series switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type excelSpanBipolarViolation into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of Bipolar Violations that have occurred on this span since the span became active or since the last request. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
lucent	1.3.6.1.4.1.1751
products	1.3.6.1.4.1.1751.1
excel	1.3.6.1.4.1.1751.1.67			The MIB module for entities implementing the xxxx protocol.
excel4	1.3.6.1.4.1.1751.1.67.4
excelExperimental	1.3.6.1.4.1.1751.1.67.4.1
excelProducts	1.3.6.1.4.1.1751.1.67.4.2
excelSystem	1.3.6.1.4.1.1751.1.67.4.2.1
STR excelNodeIdentifier	1.3.6.1.4.1.1751.1.67.4.2.1.1	DisplayString	read-write	An attribute assigned by the system administrator that uniquely identifies this host system.
STR excelNodeLocationIdentifier	1.3.6.1.4.1.1751.1.67.4.2.1.2	DisplayString	read-write	A unique identifier is a concatination of identifiers for the city, state, building and traffic unit identity of this host system.
STR excelNodeCurrentTime	1.3.6.1.4.1.1751.1.67.4.2.1.3	DisplayString	read-only	The value for the current time on this host system.
excelSwitch	1.3.6.1.4.1.1751.1.67.4.2.2
INT excelCurrentNode	1.3.6.1.4.1.1751.1.67.4.2.2.1	INTEGER	read-write	This agent can only view one node at a time. Whatever this excelCurrentNode is set to is the view against which other objects are matched. This value represents a LOGICAL node ID.
INT excelNodes	1.3.6.1.4.1.1751.1.67.4.2.2.2	INTEGER	read-only	The number of nodes or rows in excelNodeTable.
excelNodeTable	1.3.6.1.4.1.1751.1.67.4.2.2.3		not-accessible	This table contains a row for each node in the switch being managed by this agent.
excelNodeEntry	1.3.6.1.4.1.1751.1.67.4.2.2.3.1		not-accessible	Definition for the ExcelNodeEntry List
INT excelNodeIndex	1.3.6.1.4.1.1751.1.67.4.2.2.3.1.1	INTEGER	not-accessible	This object is a unique identifieer into the excelNodeTable.
INT excelNodeLogicalID	1.3.6.1.4.1.1751.1.67.4.2.2.3.1.2	INTEGER	read-only	This object represents the logical ID that the host application assigns to the node represented by this row.
INT excelNodePhysicalID	1.3.6.1.4.1.1751.1.67.4.2.2.3.1.3	INTEGER	read-only	This object represents the unique physical number used to identify the node. It is the serial number of the midplane.
INT excelNodeType	1.3.6.1.4.1.1751.1.67.4.2.2.3.1.4	INTEGER	read-only	This object indicates the node type of the node being managed.
excelNode	1.3.6.1.4.1.1751.1.67.4.2.2.4
excelNodeHardware	1.3.6.1.4.1.1751.1.67.4.2.2.4.1
excelCommunicationEquipment	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1
excelCommunicationCard	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1
excelCommCardTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1		not-accessible	This table contains a row for each communication card in this node. A communication card is considered to be a card that plays a role in the call processing capabilities of the node.
excelCommCardEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1.1		not-accessible
SLO excelCommCardSlotIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1.1.1	SlotsInNode	not-accessible	This object represents the slot number occupied by this card. Note that this value is the index into the excelDeviceCardTable.
CAR excelCommCardOperState	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1.1.2	CardOperState	read-only	This object represents the state of this card. oosBySwitch(2) indicates that the switch has taken the card out of service. oosByHost(3) indicates that the host has taken the card out of service. standbyByHost(4) indicates that the host has put the card in a standby state. If this object is generalHWFailure(5), then the card is off-line and must be serviced. needsSystemSW(6) indicates that System Software needs to be downloaded to the switch.
INT excelCommCardResetReason	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1.1.3	INTEGER	read-only	This object represents the reason for this card's last reset.
INT excelCommCardConfigStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1.1.4	INTEGER	read-only	This object represents the state of the battery-backed configuration data. If it is invalid(1), then the card must be reconfigured by the host.
INT excelCommCardConfidenceTest	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1.1.5	INTEGER	read-only	Indicates status of Confidence test.
INT excelCommCardAction	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1.1.6	INTEGER	read-write	This object contains the actions that can occur on a card. These include : locked - takes the card out of service, but leave the current configuration intact. unlocked - puts a card out of service back into service shutdown - intermediate state when card is in the process of being locked.
STR excelCommCardActionTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.1.1.1.7	DisplayString	read-only	Date and time of last action taken.
excelDSP	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2
excelVoipDsp	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1
INT excelVoipSlotNumber	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.1	INTEGER	read-write	This object represents the index of the card that information will be presented on
excelVoipDspTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2		not-accessible
excelVoipDspEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1		not-accessible
INT excelVoipDspIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.1	INTEGER	not-accessible	Index into the Voice over IP DSP table
INT excelVoipDspInstalled	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.2	INTEGER	read-only	This object indicates if the DSP module is installed or not.
INT excelVoipDspNumChannelsSupported	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.3	INTEGER	read-only	This object indicates the number of channels available from the slot.
CAR excelVoipDspOperState	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.4	CardOperState	read-only	This object indicates operational state of the dsp.
STR excelVoipDspArtworkRevision	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.5	DisplayString	read-only	This object indicates operational state of the dsp.
INT excelVoipDspFuncRevision	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.6	INTEGER	read-only	This object indicates function revision of this dsp.
STR excelVoipDspHWRevision	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.7	DisplayString	read-only	This object indicates function version of the hardware associated of this dsp.
STR excelVoipDspSWRevision	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.8	DisplayString	read-only	This object indicates function version of the software associated of this dsp.
INT excelVoipDspRamSize	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.9	INTEGER	read-only	This object indicates the current amount of RAM on this dsp.
INT excelVoipDspSerialNum	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.10	INTEGER	read-only	This object indicates the serial number of this dsp.
INT excelVoipDspRamBuildNumber	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.1.2.1.2.1.11	INTEGER	read-only	This object indicates the build number of this dsp.
excelDeviceEquipment	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2
excelDeviceCard	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1
excelDeviceCardTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1		not-accessible	The excelDeviceCardTable, which has a row for each of the 'slots' (the maximum being, excelConfigMaxSlot) in this node. Note that this table will have an entry for each slot whether it is filled or not. It is ordered by slot number. And a slot does not necessarily mean that the card is hot swappable, like the fan tray or midplane. The columns represent information that (for the most part) is common between all types of cards.
excelDeviceCardEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1		not-accessible
SLO excelDeviceCardSlotIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.1	SlotsInNode	not-accessible	This is the slot number of the slot that the card resides in as well as the index into excelDeviceCardTable.
INT excelDeviceCardType	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.2	INTEGER	read-only	The type of card that is in this slot. If the slot does not contain a card, then the value is empty(2). It the card is unable to communicate, then the value is dead(3). If the agent is unfamiliar with the card, then the value is other(1). Otherwise, it is a value representing one of the appropriate Excel products that can reside in this slot.
STR excelDeviceCardModelDescription	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.3	DisplayString	read-only	This object is an ASCII string that represents the model description of the card in this slot.
STR excelDeviceCardArtworkRevision	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.4	DisplayString	read-only	This field has an ASCII character in the range 'A' to 'Z' (0x41-0x5B) which indicates the revision level of the card's Printed Circuit Artwork.
INT excelDeviceCardFuncRevision	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.5	INTEGER	read-only	This object indicates the card's functional revision level.
STR excelDeviceCardHWRevision	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.6	DisplayString	read-only	This object is an ASCII string that represents the ROM Revision of the card.
STR excelDeviceCardSWRevision	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.7	DisplayString	read-only	This object is an ASCII string that represents the revision levels of the system software running on this card.
INT excelDeviceCardRamSize	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.8	INTEGER	read-only	This object indicates the amount of RAM that is on the card. The RAM is measured in 1K increments.
INT excelDeviceCardSerialNum	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.9	INTEGER	read-only	This object contains the serial number of the card.
INT excelDeviceCardRAMBuildNum	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.1.1.1.10	INTEGER	read-only	This object contains the RAM Build number of the card.
excelUtility	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.2.2
excelResourceEquipment	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3
excelResourceUtilization	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1
INT excelResourceSlotId	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.1	INTEGER	read-write	This object represents the index of the card information will be presented on
excelResourceUsageTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.2		not-accessible
excelResourceUsageEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.2.1		not-accessible
INT excelResourceUsageIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.2.1.1	INTEGER	not-accessible
INT excelCpuTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.2.1.2	INTEGER	read-only	This object represents the total amount of CPU time that has been used by the selectd card.
INT excelMcbUsage	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.2.1.3	INTEGER	read-only	This object represents the percentage MCB's currently in use
excelRegionTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.3		not-accessible
excelRegionEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.3.1		not-accessible
INT excelRegionIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.3.1.1	INTEGER	not-accessible
INT excelRegionId	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.3.1.2	INTEGER	read-only
INT excelRegionSize	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.3.1.3	INTEGER	read-only
INT excelRegionUsed	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.3.1.4	INTEGER	read-only	The number of bytes in this region that are currently in use
excelPartitionTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.4		not-accessible
excelPartitionEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.4.1		not-accessible
INT excelPartitionIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.4.1.1	INTEGER	not-accessible
INT excelPartitionId	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.4.1.2	INTEGER	read-only
INT excelPartitionSize	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.4.1.3	INTEGER	read-only
INT excelPartitionUsed	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.4.1.4	INTEGER	read-only	The number of bytes in this partition that are currently in use
excelCpuUsageTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.5		not-accessible
excelCpuUsageEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.5.1		not-accessible
INT excelCpuUsageIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.5.1.1	INTEGER	not-accessible
INT excelCpuUsageTaskId	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.5.1.2	INTEGER	read-only
INT excelCpuUsageUsed	1.3.6.1.4.1.1751.1.67.4.2.2.4.1.3.1.5.1.3	INTEGER	read-only
excelNodeSoftware	1.3.6.1.4.1.1751.1.67.4.2.2.4.2
excelSystemSoftware	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1
excelSystemConfig	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.1
excelSystemAlarm	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.2
INT excelSysLastAlarmTrap	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.2.1	INTEGER	read-only	This object represents the last trap that has been sent by this agent.
INT excelSysLastAlarmSeverity	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.2.2	INTEGER	read-only	If an alarm occurred and a trap was sent, then this object indicates the severity.
INT excelSysLastAlarmNode	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.2.3	INTEGER	read-only	The Physical Node ID of the last node to encounter an alarm condition.
INT excelSysLastAlarmStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.2.4	INTEGER	read-only	The last Alarm Status change value to go out in a trap.
DSP excelSysLastAlarmDSPLastBlocked	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.2.5	DSPFunctionTypes	read-only	The last DSP Function Type that was blocked.
INT excelSysLastAlarmRefClockSrc	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.2.6	INTEGER	read-only	If a Reference Clock Source Lost alarm occurred, this object stores which reference clock the alarm is occurring on. If this alarm has not occurred, then the value will be equal to notApplicable(1).
excelRing	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3
excelRingTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2		not-accessible	It is possible for a node to be a member of numerous rings. Therefore, each row of this table describes the characteristics of each ring of which this node is a member.
excelRingEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1		not-accessible	Definition of the ExcelRingEntry sequence
INT excelRingLogicalIDIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.1	INTEGER	not-accessible	The logical ID of the ring being described by this row.
INT excelRingStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.2	INTEGER	read-only	This object represents the status of the proprietary fiber network that connects the nodes of an EXS. If this object equals outOfService(5), then excelRingOOSReason will contain the reason that this ring is considered out of service.
INT excelRingOOSReason	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.3	INTEGER	read-only	If the node has been declared out of service on this ring, and excelRingStatus equals outOfService(5), then this object will equal any value other than none(1).
INT excelRingTransmitMode	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.4	INTEGER	read-only	The transmit mode of this node as it relates to this ring
INT excelRingNodeRole	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.5	INTEGER	read-only	The role that this node palys in this ring
SLO excelRingCtrlSlot	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.6	SlotsInNode	read-only	The slot in which the EXNET I/O controller resides for this node.
INT excelRingPortAStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.7	INTEGER	read-only	The status of port A on the EXNET I/O controller card for this node on this ring.
INT excelRingPortBStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.8	INTEGER	read-only	The status of port B on the EXNET I/O controller card for this node on this ring.
INT excelRingSourcePacketID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.3.2.1.9	INTEGER	read-only	The lowest packet ID assigned to this node for this ring.
excelRingNodeStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4
INT ringID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.1	INTEGER	read-only	The id of this ring
ringStatusTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2		not-accessible	This table describes the phyysical and logical contents of the selected ring.
ringStatusTableEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1		not-accessible
INT ringStatusIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1.1	INTEGER	not-accessible	Index into the ring status entry table
INT ringStatusTransmitting	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1.2	INTEGER	read-only	Is this node currently transmitting on a ring.
IP ringStatusIpAddress	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1.3	IpAddress	read-only	The IP address of this object on the ring
INT ringStatusLogicalId	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1.4	INTEGER	read-only	The logical ID of this node on the ring
INT ringStatusPhysicalId	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1.5	INTEGER	read-only	The physical Id on this node on the ring.
INT ringStatusLoadMajorRev	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1.6	INTEGER	read-only	The major revision number of the current build
INT ringStatusLoadMinorRev	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1.7	INTEGER	read-only	The minor revision number of the current build
INT ringStatusLoadBuildNum	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.1.4.2.1.8	INTEGER	read-only	The number of the current build
excelCommunicationSoftware	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2
excelMatrix	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1
excelMtxTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1		not-accessible	This table contains an entry for each matrix card in the system. Note that in an EXnet Connect system, there will be a row in this table to represent the EXnet Connect Card.
excelMtxEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1		not-accessible
SLO excelMtxSlotIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.1	SlotsInNode	not-accessible	The slot in which the matrix represented by this row resides.
INT excelMtxPosition	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.2	INTEGER	read-only	This object indicates the physical position of this matrix card. Left(1), Right(2), or Other(3)
INT excelMtxType	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.3	INTEGER	read-only	This object indicates the node type of this matrix card. other(1), pcx(2), csn(3), lnx(4), or exnetConnect(5).
INT excelMtxState	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.4	INTEGER	read-only	This object indicates the current state of this matrix card. The possible return values are: booting(1), initializing(2), standby(3), switchOver(4), active(5), other(6), disabled(7).
INT excelMtxAdjacentMatrixStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.5	INTEGER	read-only	This object indicates the status of the adjacent matrix card. notPresent(1), detected(2), noHost(3), ok(4), other(5)
INT excelMtxHostLink	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.6	INTEGER	read-only	This object indicates the status of the matrix card host link.
INT excelMtxRamLoadPresent	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.7	INTEGER	read-only	This object indicates the status of the matrix card download.
INT excelMtxReadyForConfiguration	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.8	INTEGER	read-only	This object indicates the state of the matrix card.
IP excelMtxIpAddress	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.9	IpAddress	read-only	This object is the IP Address associated with the currently active matrix card.
STR excelMtxBootMajorVersion	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.10	DisplayString	read-only	Current value of the major version number of the boot software.
STR excelMtxBootMinorVersion	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.11	DisplayString	read-only	If value is equal to zero (0), no system software is present
STR excelMtxSystemSoftwareMajor	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.12	DisplayString	read-only	If value is equal to zero (0), no system software is present
STR excelMtxSystemSoftwareMinor	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.13	DisplayString	read-only	If value is equal to zero (0), no system software is present
STR excelMtxSystemSoftwareBuild	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.14	DisplayString	read-only	If value is equal to zero (0), no system software is present
IP excelMtxSecIpAddress	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.1.1.15	IpAddress	read-only	This object is the IP Address associated with the current atand-by matrix card.
excelMatrixManagement	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.2
INT excelMatrixSwitchOver	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.2.1	INTEGER	read-write	This object provides capabilty to cause a matrix switchover
STR excelMatrixSwitchOverTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.1.2.2	DisplayString	read-only	The date and time when the matrix switchover occurred
excelExnetConnect	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.2
excelExnetConnectTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.2.1		not-accessible	This table contains a row for each EXNET Connect Card in the PC Chassis.
excelExnetConnectEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.2.1.1		not-accessible	Definition of the ExcelExnetConnectEntry sequence
INT excelExnetConnectLogicalNodeIDIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.2.1.1.1	INTEGER	read-only	This object is the logical Node ID that has been assigned to this EXNET Connect
INT excelExnetConnectClockMaster	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.2.1.1.2	INTEGER	read-only	This object indicates whether or not the EXNET Connect Card is the clock master on the bus. If the value is yes(2), then the EXNET Connect card is the clock master.
INT excelExnetConnectClockSpeed	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.2.1.1.3	INTEGER	read-only	The clock speed of the resource bus on this EXNET Connect.
excelSpans	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3
excelGeneralSpan	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1
excelSpanTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1.1		not-accessible	This table contains a row for each active span defined on a line card contained in the chassis.
excelSpanEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1.1.1		not-accessible	Definition of the ExcelSpanEntry sequence
INT excelSpanTableIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1.1.1.1	INTEGER	not-accessible	The Logical Span ID being accessed
INT excelLogicalSpanId	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1.1.1.2	INTEGER	read-only	The Logical Span ID being accessed
C32 excelSpanBipolarViolationEx	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1.1.1.3	Counter32	read-only	The number of Bipolar Violations that have occurred on this span since the span became active or since the last request
C32 excelSpanFrameErrors	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1.1.1.4	Counter32	read-only	If the queried span in a T1 span, then this field will contain the number of Bit Frame Errors that have occurred on this span since the span became active or since the last request. If the queried span in an E1 span, then this field will contain the number of Frame Alignment Signal Errors that have occurred on this span since the span became active or since the last request
C32 excelSpanSlipErrors	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1.1.1.5	Counter32	read-only	The number of slips that have occurred on this span since the span became active or since the last request
C32 excelSpanLossofFrame	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.1.1.1.6	Counter32	read-only	The number of loss of frame that have occurred on this span since the since the last request
excelSpanManagement	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.2
INT excelCurrentSpanId	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.2.1	INTEGER	read-write	The id of the span an in/out of service action will occur on.
INT excelSpanAction	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.2.2	INTEGER	read-write	The action to be taken againts the span id defined by excelCurrentSpanId.
INT excelChannelAction	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.3.2.3	INTEGER	read-write	The action to be taken againts the channels associated with the span as defined in excelCurrentSpanID
excelSS7	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4
excelSS7Config	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1
excelSS7CardTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1		not-accessible	This table contains a row for each SS7 Card in the current node.
excelSS7CardEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1		not-accessible	Definition of the ExcelSS7CardEntry sequence
INT excelSS7CardSlotNumberIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.1	INTEGER	not-accessible	This entry represents slot number in which this card resides.
INT excelSS7CardRedundancyConfiguredRole	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.2	INTEGER	read-only	This entry represents the configured role of this card in SS7 redundancy. The current role may be different
INT excelSS7CardRedundancyCurrentRole	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.3	INTEGER	read-only	This entry represents the current role of this card in SS7 redundancy.
INT excelSS7CardRedundancyMate	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.4	INTEGER	read-only	This entry represents the slot number of the SS7 card associated with this card for the purpose of SS7 redundancy. A value of 255 (0xff) indicates that there is no association.
INT excelSS7CardRedundancyStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.5	INTEGER	read-only	This entry represents the current role of this card in SS7 redundancy.
INT excelSS7CardStackID1	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.6	INTEGER	read-only	This entry represents the ID of the first of four possible stack ids resident on this card. A value of 255 (0xff) indicates not configured.
INT excelSS7CardStackID2	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.7	INTEGER	read-only	This entry represents the ID of the second of four possible stack id resident on this card. A value of 255 (0xff) indicates not configured.
INT excelSS7CardStackID3	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.8	INTEGER	read-only	This entry represents the ID of the third of four possible stack ids resident on this card. A value of 255 (0xff) indicates not configured.
INT excelSS7CardStackID4	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.9	INTEGER	read-only	This entry represents the ID of the fourth of four possible stack ids resident on this card. A value of 255 (0xff) indicates not configured.
INT excelSS7CardMaximumLinks	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.1.1.10	INTEGER	read-only	This entry represents the maximum number of links supported by this card.
excelSS7ConfigLinkTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2		not-accessible	This table contains a row for each link that is assigned in the node.
excelSS7LinkEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1		not-accessible	Definition of the ExcelSS7LinkEntry sequence
INT excelSS7LinkStackIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1.1	INTEGER	not-accessible	This entry represents the Stack with which this link is associated. A value of 255 (0xff) indicates not configured.
INT excelSS7LinkLinkIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1.2	INTEGER	not-accessible	This entry represent the ID of this link. A value of 255 (0xff) indicates not configured.
INT excelSS7LinkLinkSetIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1.3	INTEGER	not-accessible	This entry represents the Link Set with which this link is associated. A value of 255 (0xff) indicates not configured.
INT excelSS7LinkStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1.4	INTEGER	read-only	This entry represents the status of this link.
INT excelSS7LinkSignalingLinkCode	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1.5	INTEGER	read-only	This entry represents the Signaling Link Code.
INT excelSS7LinkDataRate	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1.6	INTEGER	read-only	This entry represents the data rate for this link.
INT excelSS7LinkLogicalSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1.7	INTEGER	read-only	This entry represents the Logical Span on which this link resides.
INT excelSS7Linkchannel	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.2.1.8	INTEGER	read-only	This entry represents the Channel Offset on which this link resides.
excelSS7StackTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3		not-accessible	This table contains a row for each SS7 Stack in the current node.
excelSS7StackEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3.1		not-accessible	Definition of the ExcelSS7StackEntry sequence
INT excelSS7StackIDIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3.1.1	INTEGER	not-accessible	This entry represents the stack id.
STR excelSS7StackOPC	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3.1.2	DisplayString	read-only	This entry represents this Origination Point Code for this SS7 node.
SS7 excelSS7StackMTPVariant	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3.1.3	SS7VariantsTypes	read-only	This entry represents the MTP variant supported.
SS7 excelSS7StackISUPVariant	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3.1.4	SS7VariantsTypes	read-only	This entry represents the ISUP variant supported.
SS7 excelSS7StackL3PVariant	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3.1.5	SS7VariantsTypes	read-only	This entry represents the L3P variant supported.
SS7 excelSS7StackTUPVariant	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3.1.6	SS7VariantsTypes	read-only	This entry represents the TUP variant supported.
SS7 excelSS7StackL3PTUPVariant	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.3.1.7	SS7VariantsTypes	read-only	This entry represents the L3P TUP variant supported.
excelSS7LinkSetTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.4		not-accessible	This table contains a row for each SS7 LinkSet in the current node.
excelSS7LinkSetEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.4.1		not-accessible	Definition of the ExcelSS7LinkSetEntry sequence
INT excelSS7LinkSetIDIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.4.1.1	INTEGER	not-accessible	This entry represents the logical link set id.
INT excelSS7LinkSetStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.4.1.2	INTEGER	read-only	This entry represents the link set status.
STR excelSS7LinkSetAPC	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.4.1.3	DisplayString	read-only	This entry represents the APC for this link.
INT excelSS7LinkSetStackIDIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.1.4.1.4	INTEGER	read-only	This entry represents the Logical Stack ID associated with this link.
excelSS7Statistics	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.4.2
excelPPL	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5
INT excelPPLComponentId	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.1	INTEGER	read-only	Component id of the PPL event being processed
excelPPLComponentStatistics	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2
excelL3PCICTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1		not-accessible	This table will contain information on the ppl L3P CIC events receicved and the date and time of the last one received. Only the following event ID will be captured: 8 Remote maintaince block indication 15 Remote hardware group block indication 18 Local maintaince block success 22 UCIC received
excelL3PCICEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1.1		not-accessible
INT excelL3PCICIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1.1.1	INTEGER	not-accessible	Index into this table.
INT excelL3PCICSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelL3PCICChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelL3PCICEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelL3PCICTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelL3PCICCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelL3PCICStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.1.1.7	RowStatus	read-create	The status of this program entry
excelL3PLinkTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2		not-accessible	This table will contain information on the ppl L3P link events receicved and the date and time of the last one received. Only the following event ID will be captured: 10 - Link in service 11 - Link out-of-service, L1_DEAD 12 - Link out of service, L5_OOS
excelL3PLinkEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2.1		not-accessible
INT excelL3PLinkIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2.1.1	INTEGER	not-accessible	Index into this table.
INT excelL3PLinkSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelL3PLinkChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelL3PLinkEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelL3PLinkTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelL3PLinkCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelL3PLinkStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.2.1.7	RowStatus	read-create	The status of this program entry
excelCPCTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3		not-accessible	This table will contain information on the ppl CPC events receicved and the date and time of the last one received. Only the following event ID will be captured: 20 Maximum number of UTP retries completed without a response
excelCPCEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3.1		not-accessible
INT excelCPCIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3.1.1	INTEGER	not-accessible	Index into this table.
INT excelCPCSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelCPCChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelCPCEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelCPCTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelCPCCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelCPCStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.3.1.7	RowStatus	read-create	The status of this program entry
excelSPRCTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4		not-accessible	This table will contain information on the ppl SPRC events receicved and the date and time of the last one received. Only the following event ID will be captured: 2 Undefined CIC in incoming message 5 Remote user part available
excelSPRCEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4.1		not-accessible
INT excelSPRCIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4.1.1	INTEGER	not-accessible	Index into this table.
INT excelSPRCSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelSPRCChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelSPRCEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelSPRCTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelSPRCCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelSPRCStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.4.1.7	RowStatus	read-create	The status of this program entry
excelUCICTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5		not-accessible	This table will contain information on the ppl UCIC events receicved and the date and time of the last one received. Only the following event ID will be captured: 1 Unequipped CIC reception
excelUCICEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5.1		not-accessible
INT excelUCICIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5.1.1	INTEGER	not-accessible	Index into this table.
INT excelUCICSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelUCICChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelUCICEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelUCICTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelUCICCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelUCICStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.5.1.7	RowStatus	read-create	The status of this program entry
excelHMDTTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6		not-accessible	This table will contain information on the ppl HMDT events receicved and the date and time of the last one received. Only the following event ID will be captured: 0 Remote processor outage 2 Local Inhibit 6 UPN MSU Received
excelHMDTEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6.1		not-accessible
INT excelHMDTIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6.1.1	INTEGER	not-accessible	Index into this table.
INT excelHMDTSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelHMDTChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelHMDTEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelHMDTTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelHMDTCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelHMDTStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.6.1.7	RowStatus	read-create	The status of this program entry
excelLSACTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7		not-accessible	This table will contain information on the ppl LSAC events receicved and the date and time of the last one received. Only the following event ID will be captured: 2 Signaling Link Failure
excelLSACEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7.1		not-accessible
INT excelLSACIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7.1.1	INTEGER	not-accessible	Index into this table.
INT excelLSACSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelLSACChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelLSACEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelLSACTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelLSACCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelLSACStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.7.1.7	RowStatus	read-create	The status of this program entry
excelTLACTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8		not-accessible	This table will contain information on the ppl TLAC events receicved and the date and time of the last one received. Only the following event ID will be captured: 0 Remote processor outage 2 Local Inhibit 4 Remote Inhibit
excelTLACEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8.1		not-accessible
INT excelTLACIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8.1.1	INTEGER	not-accessible	Index into this table.
INT excelTLACSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelTLACChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelTLACEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelTLACTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelTLACCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelTLACStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.8.1.7	RowStatus	read-create	The status of this program entry
excelTSFCTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9		not-accessible	This table will contain information on the ppl TSFC events receicved and the date and time of the last one received. Only the following event ID will be captured: 1 Destination Insaccessible
excelTSFCEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9.1		not-accessible
INT excelTSFCIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9.1.1	INTEGER	not-accessible	Index into this table.
INT excelTSFCSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelTSFCChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelTSFCEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelTSFCTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelTSFCCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelTSFCStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.9.1.7	RowStatus	read-create	The status of this program entry
excelCROTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10		not-accessible	This table will contain information on the ppl CRO events receicved and the date and time of the last one received. Only the following event ID will be captured: 4 Continuity recheck attepmt failure
excelCROEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10.1		not-accessible
INT excelCROIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10.1.1	INTEGER	not-accessible	Index into this table.
INT excelCROSpanID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10.1.2	INTEGER	read-create	The id of the span this event has occurred on.
INT excelCROChannelID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10.1.3	INTEGER	read-create	The id of the channel this event has occurred on.
INT excelCROEventID	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10.1.4	INTEGER	read-create	Id of the event that has occurred.
STR excelCROTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10.1.5	DisplayString	read-create	The time of the last occurance of this event.
INT excelCROCount	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10.1.6	INTEGER	read-create	The current number of times this event has occurred since system startup
ROW excelCROStatus	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.5.2.10.1.7	RowStatus	read-create	The status of this program entry
excelISDN	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6
excelISDNConfig	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1
excelISDNConfigDChanTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1		not-accessible	This table contains a row for each D Channel that is assigned in the node.
excelISDNConfigDChanEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1		not-accessible	Definition of the ExcelISDNConfigDChanEntry sequence
INT excelISDNConfigDChanSpanIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1.1	INTEGER	read-only	The Logical Span ID of the span which contains the channel assigned to the D Channel represented by this row.
INT excelISDNConfigDChanIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1.2	INTEGER	read-only	The Channel ID of the channel assigned to the D Channel represented by this row.
INT excelISDNConfigDChanConnType	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1.3	INTEGER	read-only	The connection type of the D Channel represented by this row.
INT excelISDNConfigDChanHDLCBitPol	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1.4	INTEGER	read-only	The HDLC Bit Polarity of the D Channel represented by this row.
INT excelISDNConfigDChanBChanSelect	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1.5	INTEGER	read-only	The B Channel Selection Mode associated with the D Channel that is represented by this row.
INT excelISDNConfigDChanBChanEncTrans	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1.6	INTEGER	read-only	The B Channel Encoding for transmission associated with the D Channel that is reprsented by this row.
INT excelISDNConfigDChanLocation	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1.7	INTEGER	read-only	The location of the D Channel represented by this row.
INT excelISDNConfigDChanPhysicalMedium	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.6.1.1.1.8	INTEGER	read-only	The physical medium of the D channel. Typically a 64kbps T1/E1/J1 line.
excelMediaGateway	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7
excelMGSystem	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.1
INT excelMGActiveProtocol	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.1.1	INTEGER	read-only	The current active protocol executing on the matrix.
STR excelMGSystemName	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.1.2	DisplayString	read-only	The name of the Media Gateway system. The default name will the IP Address of the active matrix.
SLO excelMGNumSlots	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.1.3	SlotsInNode	read-only	The number of slots in th e chassis available for Media Gateway Hardware.
excelMGVoip	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2
excelVoipAddressTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.1		not-accessible
excelVoipAddressEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.1.1		not-accessible
INT excelVoipAddressIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.1.1.1	INTEGER	not-accessible	This is the index into the excel VoIP address table .
INT excelVoipAddressEntityType	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.1.1.2	INTEGER	read-only	This object describes the entity on the Vdac card being displayed.
IP excelVoipIpAddress	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.1.1.3	IpAddress	read-only	This object displays the IP Address assigned to the current entity.
IP excelVoipSubNetMask	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.1.1.4	IpAddress	read-only	This object displays the subnet mask assigned to the current entity.
IP excelVoipIpGateway	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.1.1.5	IpAddress	read-only	This object displays the default IP Gateway Address assigned to the current entity.
INT excelVoipResetIndicator	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.1.1.6	INTEGER	read-only	This object discribes if an object reset is needed.
IP excelMGResAttrIpAddress	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.2	IpAddress	read-write	This object displays the IP Address needed to get Resource Attribute information.
excelMGResourceAttributeTable	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3		not-accessible
excelMGResourceAttributeEntry	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1		not-accessible
SLO excelMGResAttrIndex	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.1	SlotsInNode	not-accessible	Index into the excelMGResourceAttribute table.
PAY excelMGPayloadType	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.2	PayloadTypes	read-only
INT excelMGPayloadSize	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.3	INTEGER	read-only	The basic packet rate of an RTP Packet that is sent out over Ethernet
INT excelMGSilenceSupression	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.4	INTEGER	read-only	This object indicates if silence supression has been enabled.
INT excelMGEchoCancellation	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.5	INTEGER	read-only	This object determines if echo cancellation logic is enabled or not.
INT excelMGMinDelayValue	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.6	INTEGER	read-only	Time in milliseconds of the minimum delay value.
INT excelMGMaxDelayValue	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.7	INTEGER	read-only	Time in milliseconds of the maximum delay value.
INT excelMGAdaptionRate	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.8	INTEGER	read-only	Time in milliseconds of the adaption rate
INT excelMGFaxType	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.9	INTEGER	read-only	The object returns the current Fax type.
INT excelMGModemEnableTransport	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.10	INTEGER	read-only
PAY excelMGBypassCoderType	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.11	PayloadTypes	read-only	The object returns the current bypass coder types.
PAC excelMGRtpPacketDepth	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.12	PacketDepth	read-only	This object returns the redundancy packet depth for RTP.
PAC excelMGFaxPacketDepth	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.13	PacketDepth	read-only	This objects returns the current Fax redundancy packet depth.
PAC excelMGModemPacketDepth	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.14	PacketDepth	read-only	This object returns the current modem redundancy packet depth.
INT excelMGTypeOfServicePrecedence	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.15	INTEGER	read-only
INT excelMGTypeOServiceDelay	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.16	INTEGER	read-only
INT excelMGTypeOfServiceThroughput	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.17	INTEGER	read-only
INT excelMGTypeOfServiceReliability	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.18	INTEGER	read-only
INT excelMGTypeOfServiceCost	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.19	INTEGER	read-only
INT excelMGRtcpPortOffset	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.20	INTEGER	read-only	This object returns the current modem redundancy packet depth.
INT excelMGT38PortOffset	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.2.3.1.21	INTEGER	read-only	This object returns the current modem redundancy packet depth.
excelMGConfig	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.3
IP excelMGConfigPrimaryMGCAddress	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.3.1	IpAddress	read-only	IP Address of the primary softswitch (call agent)
INT excelMGConfigPrimaryPort	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.3.2	INTEGER	read-only	The port number used when connection to the primary softswitch call agent
IP excelMGConfigSecondaryMGCAddress	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.3.3	IpAddress	read-only	IP Address of the secondary softswitch (call agent)
INT excelMGConfigSecondaryPort	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.3.4	INTEGER	read-only	The port number used when connection to the secondary softswitch call agent
INT excelMGConfigLocalPort	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.3.5	INTEGER	read-only	Port number assigned to the local protocol task
excelMGConfigIpdc	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.4
INT excelMGConfigIpdcReconnectAttempts	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.4.1	INTEGER	read-only	The number of time the local protocol task will attempt to connect to the currently active Call Agent
excelMGConfigMgcp	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.5
INT excelConfigMgcpPriTransmitInterval	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.5.1	INTEGER	read-only	Count used when switching over to a secondary call agent from a primary call agent
INT excelConfigMgcpSecTransmitInterval	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.5.2	INTEGER	read-only	Count used when switching over to a primary call agent from a secondary call agent
INT excelConfigMgcpResponseInterval	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.5.3	INTEGER	read-only	This object specifies the time the gateway holds onto a message response sent to the CA. This is for solicited messages sent from the CA. If the time expires, then the gateway removes the response from the response queue. If the CA sends another solicited message to the gateway and the response is in the response queue, then the gateway sends the response which is contained in the response queue. This essentially means that for every solicited message sent from the CA, the gateway looks in its response queue to see if it has a response for that message.
INT excelConfigMgcpRetransmissionTime	1.3.6.1.4.1.1751.1.67.4.2.2.4.2.2.7.5.4	INTEGER	read-only	When the gateway sends an unsolicited message to the CA, and if a response is not received, this parameter specifies the time before the gateway resends the message.
excelOAMP	1.3.6.1.4.1.1751.1.67.4.2.3
INT excelEXSAgentVerbose	1.3.6.1.4.1.1751.1.67.4.2.3.1	INTEGER	read-write	This variable will allow debugging messages to be turned off and on dynamically for the EXSAgent process
INT excelEXSEventManagerVerbose	1.3.6.1.4.1.1751.1.67.4.2.3.2	INTEGER	read-write	Ths object allows the end users to turn debugging information on dynamically for process EXSEventManager.
excelExtension	1.3.6.1.4.1.1751.1.67.4.2.4

RFC description

SNMP management MIB for Excel EXS family switching systems enabling network monitoring and control of voice and data platforms.

Start monitoring Lucent Excel4 series switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EXCEL4-SWITCH-MIB