All MIBs › EXPERTV2-MIB
Category: Device Management, Vendor: ExtraHop
Description: Provides SNMP management objects for ExpertV2 or network expert system monitoring and diagnostics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is EXPERTV2-MIB?
EXPERTV2-MIB is a Huawei enterprise MIB associated with an "Expert V2" component related to access-server and SMB (small/medium business) gateway board hardware. Given the sparse source data, its plausible data categories are board/device identification and status information for the smb-board and access-server hardware families under the Huawei product tree. Its likely use is monitoring hardware presence and status of the access-server or SMB board module within a larger Huawei chassis, though specific object names were not available to confirm counters like temperature or CPU load. It sits under the Huawei enterprise OID branch and shows no clear dependency on external IETF MIBs based on available context. It would typically be deployed in Huawei access-server or SMB gateway equipment in enterprise or carrier-access environments, where an EXPERTV2-MIB download would be the first step to inspect its object definitions in a MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in EXPERTV2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei access-server hardware
- Huawei SMB board/gateway equipment
Monitoring Examples
No table/object names were available in the source data beyond OID-tree placeholders (huawei, products, access-server, expert-v2, device, smb-board), so a concrete monitoring scenario cannot be constructed without inventing object names not present in the extract. This module appears to define primarily structural/identity OID nodes rather than documented runtime data tables based on the available extract, so a runtime monitoring scenario is not described here.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| huawei | 1.3.6.1.4.1.2011 | |||
| products | 1.3.6.1.4.1.2011.2 | |||
| access_server | 1.3.6.1.4.1.2011.2.3 | |||
| expert_v2 | 1.3.6.1.4.1.2011.2.3.4 | |||
| device | 1.3.6.1.4.1.2011.2.3.4.1 | |||
| devBaseInfoGroup | 1.3.6.1.4.1.2011.2.3.4.1.1 | |||
| deviceSystemInfomation | 1.3.6.1.4.1.2011.2.3.4.1.1.1 | |||
| DAT sysDateAndTime | 1.3.6.1.4.1.2011.2.3.4.1.1.1.1 | DateAndTime | read-write | The date and time of this device can be set.DateAndTime is in octet mode which does not include time-zone information. |
| IP sysIPAddr | 1.3.6.1.4.1.2011.2.3.4.1.1.1.2 | IpAddress | read-only | The device lacks of IP address |
| INT sysVersion | 1.3.6.1.4.1.2011.2.3.4.1.1.1.3 | INTEGER | read-only | Expert V2 device version |
| slotBoardTable | 1.3.6.1.4.1.2011.2.3.4.1.1.2 | not-accessible | The board information table describes the information of the type, the status and the software version etc. of the boards in various slot of the EXPERT. | |
| slotBoardEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1 | not-accessible | The object defined by this line describes the information of the board in the slot. | |
| INT slotBoardSlotNo | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.1 | INTEGER | not-accessible | Slot number, it forms the index for this table. The EXPERT includes 16 slots. The value range of which is from 0 to 15. |
| INT slotBoardType | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.2 | INTEGER | read-only | The type of slot board, it describes the type of board to be inserted in the slot among which null (100) indicates null slot. When the variable value is null (100), the variable values of subsequent rows of this row has no meaning, all of which are 0 or null. |
| INT slotBoardNo | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.3 | INTEGER | read-only | Board number, ranging from 0 to 11. When the slot is null, the returned value is 65535 indicating invalidation. |
| INT slotBoardStatus | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.4 | INTEGER | read-only | Board status not-install(0) Not-installed normal(1) Normal fault(2) Fault active-normal(3) The active one is normal active-error(4) The active one is faulty back-normal(5) The backup one is normal back-error(6) The backup one is faulty When the board type is null (100), the board status returns not-install (0) to indicate invalidation. |
| DAT slotBoardTime | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.5 | DateAndTime | read-only | system time |
| STR slotBoardPCBVersion | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.6 | DisplayString | read-only | Description of Board PCB version. When the board type is null (100), the returned value is \0 indicating invalidation. |
| STR slotBoardBIOSVersion | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.7 | DisplayString | read-only | Description of Board BIOS version, when the board type is null (100), the returned value is \0 indicating invalidation. |
| STR slotBoardSoftwareVersion | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.8 | DisplayString | read-only | Board system version number. When the board type is null (100), the returned value is \0 indicating invalidation. |
| STR slotBoardLogicVersion | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.9 | DisplayString | read-only | Description of Board logic version. When the board type is null (100), the returned value is \0 indicating invalidation. |
| STR slotBoardDSPVersion | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.10 | DisplayString | read-only | Description of Board DSP version. When the board type is null (100), the returned value is \0 indicating invalidation. |
| STR slotBoardOtherVersion | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.11 | DisplayString | read-only | Description of other versions. When the board type is null (100), the returned value is \0 indicating invalidation. |
| INT slotBoardCPURatio | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.12 | INTEGER | read-only | Board CPU seizure ratio. When the board type is null (100), the returned value is \0 indicating invalidation. |
| INT slotBoardCPUStatus | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.13 | INTEGER | read-only | Board CPU status normal(1) indicating CPU is normal overload1(2) indicating CPU is in the status of level 1 overload overload2(3) indicating CPU is in the status of level 2 overload overload3(4) indicating CPU is in the status of level 3 overload overload4(5) indicating CPU is in the status of level 4 overload When the board type is null (100), the returned value is no-meaning (0) indicating invalidation. |
| INT slotBoardMemorySize | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.14 | INTEGER | read-only | Board memory size, including used part and unused part. When the board type is null (100), the returned value is \0 indicating invalidation. |
| INT slotBoardUsableMemory | 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.15 | INTEGER | read-only | Board usable memory size. It means the unused memory of the board. When the board type is null (100), the returned value is \0 indicating invalidation. |
| boardResetInfoTable | 1.3.6.1.4.1.2011.2.3.4.1.1.3 | not-accessible | Board reset information table. It describes the causes and time of the previous reset of the EXPERT board. | |
| boardResetInfoEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.3.1 | not-accessible | The object defined by this line describes the causes and time of the previous reset of the board. | |
| INT boardResetInfoSlotNo | 1.3.6.1.4.1.2011.2.3.4.1.1.3.1.1 | INTEGER | not-accessible | Slot number. This object forms the index for this table. EXPERT includes 16 slots with the value range from 0 to 15. |
| INT boardResetInfoReason | 1.3.6.1.4.1.2011.2.3.4.1.1.3.1.2 | INTEGER | read-only | Board reset causes. The meaning of various enumeration values are as follows: slot-err(0), he input slot number is wrong. slot-nouse(1), The slot has not been configured with board. no-reset-record(2), This board has no reset record. lost-connect(3), The active SMB lost connection with this board. user-cmd(4), User delivers reset command. smb-snd-msg(5), SMD delivers reset message. abnormal(6), Reset is caused by abnormal error board-fault(7), It is unable to query due to board fault failed(8), Query failure /*SMB reset cause 20 ~ 49 */ swap-smb(20), Switching SMB board mt-reboot(21), User delivers the command of reset board all. /* VSP reset cause 50 ~ 79 */ /* HRB reset cause 80 ~ 109 */ /* MSTU reset cause 80 ~ 109 */ cfg-failed(110), Configuration failure failed-531(111), 531 failure failed-528(112), 528 failure failed-525(113) 525 failure |
| DAT boardResetInfoTime | 1.3.6.1.4.1.2011.2.3.4.1.1.3.1.3 | DateAndTime | read-only | The time of previous board reset. If the board has not reset before, the returned date and time are not defined. |
| e1InfoTable | 1.3.6.1.4.1.2011.2.3.4.1.1.5 | not-accessible | E1 information table. It describes the information of various E1 port on the VSP board and MSTU board. | |
| e1InfoEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.5.1 | not-accessible | The object defined by this line describes the information of the E1 port. | |
| INT e1InfoSlotNo | 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.1 | INTEGER | not-accessible | Slot number. This object and e1InfoE1NoInBoard form the index for this table which is used as the only one flag indicating a E1 in certain board. The value range of slot number is from 0 to 15. |
| INT e1InfoE1NoInBoard | 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.2 | INTEGER | not-accessible | The E1 number inside the board. This object and e1InfoSlotNo form the index for this table with the value range from 0 to 62. Actually, the VSP board contains four E1 ports but additional space for 12 ports is reserved. Thus for the VSP board, the value range of this object is from 0 to 15. The MSTU board contains 63 E1 ports. Thus for the MSTU board, the value range of this object is from 0 to 62. |
| INT e1InfoE1No | 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.3 | INTEGER | read-only | The global E1 number in the EXPERT. When the device include 2 MSTU boards and 10 VSP boards, the number of E1s is the most which is up to 286; thus the value range of this object is from 0 to 285. |
| INT e1InfoE1Type | 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.4 | INTEGER | read-only | E1 type, the meaning of various enumeration valuesis as follows: no1(0) China No. 1 or R2 tup(1) SS7 TUP isup(2) SS7 ISUP pra(3) ISDN DSS1 |
| INT e1InfoE1Status | 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.5 | INTEGER | read-only | The status of E1 port, the meaning of various enumeration values is as follows: uninstall(0) Not-installed fault(1) Fault normal(2) Normal alarm(3) Alarm |
| INT e1InfoE1LoopBackStatus | 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.6 | INTEGER | read-only | The loop status of E1 port, the meaning of various enumeration valuesis as follows: remote-loop(2), in the status of remote loop local-loop(4), in the status of local loop rmt-lcl-loop(6), in remote and local loop status simultaneously payload-loop(8), in the status of payload loop rmt-payload-loop(10), in remote and payload loop status simultaneously lcl-payload-loop(12), in local and payload loop status simultaneously rmt-lcl-payload-loop(14), in local, remote and payload loop status simultaneously no-loop(16) not in loop status There are three types of loop: local loop, remote loop and payload loop which are not exclusive to one another, and can exist simultaneously. |
| INT e1InfoE1PCMPara | 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.7 | INTEGER | read-only | PCM alarm parameter. This value is an 8-digit integer and each digit indicates one type of alarm as below: D7 D6 D5 D4 D3 D2 D1 D0 | | | | | | | |__ meaningless, fixed to 1 | | | | | | | | | | | | | |__Remote multiframe alarm, RMF | | | | | | | | | | | |__ TS16 all 1 | | | | | | | | | |__Slide code | | | | | | | |__Disconnection | | | | | |__Remote frame alarm, RFA | | | |___ Multiframe out-of-sync, MFA | |___Frame out-of-sync, FAS Note: Dx = 0 Alarm 1 = normal |
| mfcInfoTable | 1.3.6.1.4.1.2011.2.3.4.1.1.6 | not-accessible | MFC information table. It describes the status information of the MFC chip on the VSP boards. | |
| mfcInfoEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.6.1 | not-accessible | The object defined by this line describes the status information of the MFC chip. | |
| INT mfcInfoMfcNo | 1.3.6.1.4.1.2011.2.3.4.1.1.6.1.1 | INTEGER | not-accessible | Global MFC number. This variable value equals to the logic board number of the MFC-located VSP board with the range from 0 to 11. |
| INT mfcInfoMfcStatus | 1.3.6.1.4.1.2011.2.3.4.1.1.6.1.2 | INTEGER | read-only | The status of the MFC chip, the meaning of various enumeration values is as follows: normal(0), The MFC is in normal status. error(1), MFC fault num-err(2), The input MFC number is wrong. num-nouse(3) The MFC with this number is not configured. |
| userStatisticsGroup | 1.3.6.1.4.1.2011.2.3.4.1.1.15 | |||
| userStatisticsDevTable | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1 | not-accessible | The user statistics device table. It describes the number of various types of users within the device. | |
| userStatisticsDevEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1 | not-accessible | This line contains the object describing the user statistics information. | |
| INT userStatisticsDevIndex | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.1 | INTEGER | not-accessible | Table index. It is meaningless and is fixed to 1. It is just for facilitating Agent to deliver multiple variable request. |
| INT userStatisticsDevISDN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.2 | INTEGER | read-only | The number of ISDN ports (without identifying 1B or 2B, due to repetition with MP) |
| INT userStatisticsDevMODEM | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.3 | INTEGER | read-only | The number MODEM ports |
| INT userStatisticsDevNormal | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.4 | INTEGER | read-only | The number of Normal users (General ppp users) |
| INT userStatisticsDevVPN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.5 | INTEGER | read-only | The number of VPN users |
| INT userStatisticsDevMP | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.6 | INTEGER | read-only | The number of MP users (including Modem bundling, ISDN2B and ISDN+Modem) |
| INT userStatisticsDevRLogin | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.7 | INTEGER | read-only | The number of RLoging users (including Rlogin, TCP and TCP clear) |
| INT userStatisticsDevCallback | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.8 | INTEGER | read-only | The number of Callback users (not supported by R100) |
| INT userStatisticsDevV110 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.9 | INTEGER | read-only | The number of V.110 users |
| INT userStatisticsDevV120 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.10 | INTEGER | read-only | The number of V.120 users |
| userStatisticsBoardTable | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2 | not-accessible | Board user statistics table. It describes the statistics of various types of users through certain board. | |
| userStatisticsBoardEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1 | not-accessible | This line contains the object describing the board user statistics information. | |
| INT userStatisticsBoardSlotNo | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.1 | INTEGER | not-accessible | Slot number |
| INT userStatisticsBoardISDN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.2 | INTEGER | read-only | The number of ISDN ports (without identifying 1B or 2B due to repetition with MP) |
| INT userStatisticsBoardMODEM | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.3 | INTEGER | read-only | The number of MODEM ports |
| INT userStatisticsBoardNormal | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.4 | INTEGER | read-only | The number of Normal users(general ppp users) |
| INT userStatisticsBoardVPN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.5 | INTEGER | read-only | The number of VPN users |
| INT userStatisticsBoardMP | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.6 | INTEGER | read-only | The number of MP users (including Modem bundling, ISDN2B and ISDN+Modem) |
| INT userStatisticsBoardRLogin | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.7 | INTEGER | read-only | The number of Rlogin users (including Rlogin, TCP and TCP clear) |
| INT userStatisticsBoardCallback | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.8 | INTEGER | read-only | The number of Callback users (not supported by R100) |
| INT userStatisticsBoardV110 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.9 | INTEGER | read-only | The number of V.110 users |
| INT userStatisticsBoardV120 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.10 | INTEGER | read-only | The number of V.120 users |
| userStatisticsE1Table | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3 | not-accessible | E1-port user statistics table. It describes the statistics information of varied types of users through a certain E1 port. | |
| userStatisticsE1Entry | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1 | not-accessible | This line contains the object describing E1-port user statistics information. | |
| INT userStatisticsE1SlotNo | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.1 | INTEGER | not-accessible | Slot number |
| INT userStatisticsE1PortNo | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.2 | INTEGER | not-accessible | E1 port number in board |
| INT userStatisticsE1ISDN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.3 | INTEGER | read-only | the number of ISDN ports(without identifying 1B or 2B due to repetition with MP) |
| INT userStatisticsE1MODEM | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.4 | INTEGER | read-only | The number of MODEM ports |
| INT userStatisticsE1Normal | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.5 | INTEGER | read-only | The number of Normal users(general ppp users) |
| INT userStatisticsE1VPN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.6 | INTEGER | read-only | The number of VPN users |
| INT userStatisticsE1MP | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.7 | INTEGER | read-only | The number of MP users (including Modem bundling, ISDN2B and ISDN+Modem) |
| INT userStatisticsE1RLogin | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.8 | INTEGER | read-only | The number of Rlogin users (including Rlogin, TCP and TCP clear) |
| INT userStatisticsE1Callback | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.9 | INTEGER | read-only | The number of Callback users (not supported by R100) |
| INT userStatisticsE1V110 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.10 | INTEGER | read-only | The number of V.110 users |
| INT userStatisticsE1V120 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.11 | INTEGER | read-only | The number of V1.20 users |
| userStatisticsAccCodeTable | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4 | not-accessible | The table of user statistics according to access code. It describes the statistics of various types of users with the same access code. | |
| userStatisticsAccCodeEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1 | not-accessible | This line contains the object describing the user statistics according to access code. | |
| OCT userStatisticsAccCodeIndex | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.1 | OCTET STRING | not-accessible | Access code |
| INT userStatisticsAccCodeISDN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.2 | INTEGER | read-only | The number of ISDN ports (without identifying 1B or 2B due to repetition with MP) |
| INT userStatisticsAccCodeMODEM | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.3 | INTEGER | read-only | The number of MODEM ports |
| INT userStatisticsAccCodeNormal | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.4 | INTEGER | read-only | The number of Normal users (general ppp users) |
| INT userStatisticsAccCodeVPN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.5 | INTEGER | read-only | The number of VPN users |
| INT userStatisticsAccCodeMP | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.6 | INTEGER | read-only | The number of MP users (including Modem bundling, ISDN and ISDN+Modem) |
| INT userStatisticsAccCodeRLogin | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.7 | INTEGER | read-only | The number of RLoging users (including Rlogin, TCP and TCP clear) |
| INT userStatisticsAccCodeCallback | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.8 | INTEGER | read-only | The number of Callback users (not supported by R100) |
| INT userStatisticsAccCodeV110 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.9 | INTEGER | read-only | The number of V.110 users |
| INT userStatisticsAccCodeV120 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.10 | INTEGER | read-only | The number of V1.20 users |
| userStatisticsAccCode2Table | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5 | not-accessible | Both this and the previous tables of user statistics are according to access code and the only difference is that the index of this table is group number and intra-group ID in stead of access code. Thus, it is available to go through all configured access code and perform the statistics of port seizure and the statistics of variious types of users according to each access code. | |
| userStatisticsAccCode2Entry | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1 | not-accessible | This line contains the object describing the user statistics according to access code. | |
| INT userStatisticsAccCode2GrpNo | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.1 | INTEGER | not-accessible | Group number |
| INT userStatisticsAccCode2Index | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.2 | INTEGER | not-accessible | Intra-group ID |
| OCT userStatisticsAccCode2Value | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.3 | OCTET STRING | read-only | Access code |
| INT userStatisticsAccCode2ISDN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.4 | INTEGER | read-only | The number of ISDN ports (without identifying 1B or 2B due to repetition with MP) |
| INT userStatisticsAccCode2MODEM | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.5 | INTEGER | read-only | The number of MODEM ports |
| INT userStatisticsAccCode2Normal | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.6 | INTEGER | read-only | The number of Normal users (general ppp users) |
| INT userStatisticsAccCode2VPN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.7 | INTEGER | read-only | The number of VPN users |
| INT userStatisticsAccCode2MP | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.8 | INTEGER | read-only | The number of MP users (including Modem binding, ISDN2B and ISDN+Modem) |
| INT userStatisticsAccCode2RLogin | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.9 | INTEGER | read-only | The number of RLoging users (including Rlogin, TCP and TCP clear) |
| INT userStatisticsAccCode2Callback | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.10 | INTEGER | read-only | The number of Call back users ( not supported by R001) |
| INT userStatisticsAccCode2V110 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.11 | INTEGER | read-only | The number of V.110 users |
| INT userStatisticsAccCode2V120 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.12 | INTEGER | read-only | The number of V1.20 users |
| userStatisticsAccDomainTable | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6 | not-accessible | The table of user statistics based on access field. It describes the statistics of various types of users with the same access domain. | |
| userStatisticsAccDomainEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1 | not-accessible | This line contains the object describing the user statistics accroding to access domain. | |
| OCT userStatisticsAccDomainIndex | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.1 | OCTET STRING | not-accessible | Domain |
| INT userStatisticsAccDomainISDN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.2 | INTEGER | read-only | The number of ISDN ports (without identifying 1B or 2B due to repetition with MP) |
| INT userStatisticsAccDomainMODEM | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.3 | INTEGER | read-only | The number of MODEM ports |
| INT userStatisticsAccDomainNormal | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.4 | INTEGER | read-only | The number of Normal users (general ppp users) |
| INT userStatisticsAccDomainVPN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.5 | INTEGER | read-only | The number of VPN users |
| INT userStatisticsAccDomainMP | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.6 | INTEGER | read-only | The number of MP users (including Modem binding, ISDN2B and ISDN+Modem) |
| INT userStatisticsAccDomainRLogin | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.7 | INTEGER | read-only | The number of RLoging users (including Rlogin, TCP and TCP clear) |
| INT userStatisticsAccDomainCallback | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.8 | INTEGER | read-only | The number of Call back users (not supported by R001) |
| INT userStatisticsAccDomainV110 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.9 | INTEGER | read-only | The number of V.110 users |
| INT userStatisticsAccDomainV120 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.10 | INTEGER | read-only | The number of V1.20 users |
| userStatisticsAccDomain2Table | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7 | not-accessible | The user statistics in both this and the previous tables are performed according to access domain. The only difference is that the index of this table is group number and intra-group ID in stead of access code. Thus, it is able to go through all configured access domain and perform the statistics of port seizure and the statistics of varied types of users according to each access domain. | |
| userStatisticsAccDomain2Entry | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1 | not-accessible | This line contains the object describing the user statistics according access domain. | |
| INT userStatisticsAccDomain2GrpNo | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.1 | INTEGER | not-accessible | Group number |
| INT userStatisticsAccDomain2Index | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.2 | INTEGER | not-accessible | Intra-group ID |
| OCT userStatisticsAccDomain2Value | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.3 | OCTET STRING | read-only | Domain |
| INT userStatisticsAccDomain2ISDN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.4 | INTEGER | read-only | The number of ISDN ports (without identifying 1B or 2B due to repetition with MP) |
| INT userStatisticsAccDomain2MODEM | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.5 | INTEGER | read-only | The number of MODEM ports |
| INT userStatisticsAccDomain2Normal | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.6 | INTEGER | read-only | The number of Normal users (general ppp users) |
| INT userStatisticsAccDomain2VPN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.7 | INTEGER | read-only | The number of VPN users |
| INT userStatisticsAccDomain2MP | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.8 | INTEGER | read-only | The number of MP users (including Modem binding, ISDN2B and ISDN+Modem) |
| INT userStatisticsAccDomain2RLogin | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.9 | INTEGER | read-only | The number of RLoging users (including Rlogin, TCP and TCP clear) |
| INT userStatisticsAccDomain2Callback | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.10 | INTEGER | read-only | The number of Callback users (not supported by R001) |
| INT userStatisticsAccDomain2V110 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.11 | INTEGER | read-only | The number of V.110 users |
| INT userStatisticsAccDomain2V120 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.12 | INTEGER | read-only | The number of V1.20 users |
| userStatisticsOdnTable | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8 | not-accessible | The table of user statistics based on office direction. It describes the statistics of varied types of users with the same office direction. | |
| userStatisticsOdnEntry | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1 | not-accessible | This line contains the object describing the user statistics according to office direction. | |
| INT userStatisticsOdnIndex | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.1 | INTEGER | not-accessible | Office direction number |
| INT userStatisticsOdnISDN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.2 | INTEGER | read-only | The number of ISDN ports (without identifying 1B or 2B due to repetition with MP) |
| INT userStatisticsOdnMODEM | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.3 | INTEGER | read-only | The number of MODEM ports |
| INT userStatisticsOdnNormal | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.4 | INTEGER | read-only | The number of Normal users (general ppp users) |
| INT userStatisticsOdnVPN | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.5 | INTEGER | read-only | The number of VPN users |
| INT userStatisticsOdnMP | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.6 | INTEGER | read-only | The number of MP users (including Modem binding, ISDN2B and ISDN+Modem) |
| INT userStatisticsOdnRLogin | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.7 | INTEGER | read-only | The number of RLoging users (including Rlogin, TCP and TCP clear) |
| INT userStatisticsOdnCallback | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.8 | INTEGER | read-only | The number of Callback users (not supported by R001) |
| INT userStatisticsOdnV110 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.9 | INTEGER | read-only | The number of V.110 users |
| INT userStatisticsOdnV120 | 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.10 | INTEGER | read-only | The number of V1.20 users |
| devMaintainGroup | 1.3.6.1.4.1.2011.2.3.4.1.2 | |||
| seekUserTable | 1.3.6.1.4.1.2011.2.3.4.1.2.27 | not-accessible | nas board user query table | |
| seekUserEntry | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1 | not-accessible | This table contains operation objects for nas board user query. | |
| INT seekUserType | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.1 | INTEGER | not-accessible | User query operation types: ByIP(0): Query on the basis of IP addresses. ByUserName(1): Query on the basis of user names. ByCallingNumber(2): Query on the basis of calling numbers. |
| IP seekUserIP | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.2 | IpAddress | write-only | User IP address (network byte sequence) |
| STR seekUserName | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.3 | DisplayString | write-only | User name |
| STR seekUserCallingNumber | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.4 | DisplayString | write-only | Calling number |
| INT seekUserRst | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.5 | INTEGER | not-accessible | Query results: success(0):The query succeeds. fail(1): The query fails. end(2): The query ends. |
| INT seekUserBoard | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.6 | INTEGER | not-accessible | VSP board number |
| INT seekUserPort | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.7 | INTEGER | not-accessible | User port number 0-119 (MODEM), 0-123(ISDN) |
| INT seekUserGroupNo | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.8 | INTEGER | not-accessible | Group number |
| INT seekUserServiceType | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.9 | INTEGER | not-accessible | Primitive port type |
| INT seekUserAccessType | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.10 | INTEGER | not-accessible | User access type |
| INT seekUserSessionTime | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.11 | INTEGER | not-accessible | Session duration (second) |
| INT seekUserRxRate | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.12 | INTEGER | not-accessible | Receiving speed rate |
| INT seekUserTxRate | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.13 | INTEGER | not-accessible | Sending speed rate |
| STR seekUserCalledNumber | 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.14 | DisplayString | not-accessible | Called number |
| kickUserTable | 1.3.6.1.4.1.2011.2.3.4.1.2.28 | not-accessible | nas-board forced user disconnection table | |
| kickUserEntry | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1 | not-accessible | This table contains operation objects for nas-board forced user disconnection. | |
| INT kickUserType | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.1 | INTEGER | not-accessible | User disconnection operation types: byip(0): Disconnection users are determined on the basis of IP addresses. byusername(1): Disconnection users are determined on the basis of user names. bycallingnumber(2): Disconnection users are determined on the basis of calling numbers. |
| IP kickUserIP | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.2 | IpAddress | write-only | User IP address (network byte sequence) |
| STR kickUserName | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.3 | DisplayString | write-only | User name |
| STR kickUserCallingNumber | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.4 | DisplayString | write-only | Calling number |
| INT kickUserRst | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.5 | INTEGER | not-accessible | Operation results: success(0): The query succeeds. fail(1): The query fails. end(2): The query ends. |
| INT kickUserBoard | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.6 | INTEGER | not-accessible | VSP board number |
| INT kickUserPort | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.7 | INTEGER | not-accessible | User port number 0-119(MODEM), 0-123(ISDN) |
| INT kickUserGroupNo | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.8 | INTEGER | not-accessible | Group number |
| INT kickUserServiceType | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.9 | INTEGER | not-accessible | Primitive port type |
| INT kickUserAccessType | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.10 | INTEGER | not-accessible | User access type |
| INT kickUserSessionTime | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.11 | INTEGER | not-accessible | Session duration (second) |
| INT kickUserRxRate | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.12 | INTEGER | not-accessible | Receiving rate |
| INT kickUserTxRate | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.13 | INTEGER | not-accessible | Sending speed rate |
| STR kickUserCalledNumber | 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.14 | DisplayString | not-accessible | Called number |
| devConfigGroup | 1.3.6.1.4.1.2011.2.3.4.1.3 | |||
| devTrapGroup | 1.3.6.1.4.1.2011.2.3.4.1.4 | |||
| devAlarmMibGroup | 1.3.6.1.4.1.2011.2.3.4.1.4.1 | |||
| INT alarmLevel | 1.3.6.1.4.1.2011.2.3.4.1.4.1.1 | INTEGER | not-accessible | Alarm level: emergencyAlarm(1): emergency Alarm importantAlarm(2): important Alarm generalAlarm(3): eneral Alarm promptAlarm(4): prompt Alarm Please refer Regulations of C&C08 Switch Network Management Alarm Report for the specific definitions. |
| INT alarmNMCategory | 1.3.6.1.4.1.2011.2.3.4.1.4.1.2 | INTEGER | not-accessible | Classification of network management alarm: powerSupply: Power Supply Alarm environment: Environment Alarm signaling: Signaling Alarm trunk: Trunk Alarm hardware: Hardware Alarm software: Software Alarm operation: Operation Alarm communicationFault: Communication Fault Alarm serviceQuality: Service Quality Alarm handlingError: HandlingError Alarm Please refer to Regulations of C&C08 Switch Network Management Alarm Report for the specific definitions. |
| STR alarmContents | 1.3.6.1.4.1.2011.2.3.4.1.4.1.3 | DisplayString | not-accessible | The content of MML alarm is a string of a certain format. Please refer to Regulations of C&C08 Switch Network Management Alarm Report for the specific formats. |
| devMainTainTrapGroup | 1.3.6.1.4.1.2011.2.3.4.1.4.2 | |||
| NTF seekUserTrap | 1.3.6.1.4.1.2011.2.3.4.1.4.2.0.27 | The result of querying user of NAS board | ||
| NTF kickUserTrap | 1.3.6.1.4.1.2011.2.3.4.1.4.2.0.28 | The result of NAS board kicking user offline | ||
| devAlarmTrapGroup | 1.3.6.1.4.1.2011.2.3.4.1.4.3 | |||
| NTF alarmMML | 1.3.6.1.4.1.2011.2.3.4.1.4.3.0.1 | The MMl alarm is transmitted in Trap mode. Alarm level indicates the alarm level and Alarm NM Category indicates the alarm category. Alarm contents indicate the string contents of MML alarm and the string is accordant with the Regulations of cc08 Network Management Alarm Report. | ||
| NTF alarmSlotBoardChange | 1.3.6.1.4.1.2011.2.3.4.1.4.3.0.2 | Board position changes TRAP. When the status of an equipment board or board type changes, it will be sent out by the equipment. | ||
| NTF alarmBoardLed | 1.3.6.1.4.1.2011.2.3.4.1.4.3.0.10001 | Board alarm indicator changes TRAP. When the status of an equipment board alarm indicator changes, it will be sent out by the equipment. | ||
| smb_board | 1.3.6.1.4.1.2011.2.3.4.2 | |||
| smbBaseInfoGroup | 1.3.6.1.4.1.2011.2.3.4.2.1 | |||
| vsp_board | 1.3.6.1.4.1.2011.2.3.4.3 | |||
| vspBaseInfoGroup | 1.3.6.1.4.1.2011.2.3.4.3.1 | |||
| vspPortStatusTable | 1.3.6.1.4.1.2011.2.3.4.3.1.1 | not-accessible | Port status table of VSP board and HSP board. It indicates the statuses of DSP ports and ISDN ports of VSP board or HSP board. | |
| vspPortStatusEntry | 1.3.6.1.4.1.2011.2.3.4.3.1.1.1 | not-accessible | It contains objects describing statuses of DSP ports and ISDN ports of VSP board or HSP board. | |
| INT vspPortStatusSlotNo | 1.3.6.1.4.1.2011.2.3.4.3.1.1.1.1 | INTEGER | not-accessible | Slot number of VSP board or HSP board, forming the index of this table. The value range is 0-15. |
| OCT vspPortStatusISDNPortStatus | 1.3.6.1.4.1.2011.2.3.4.3.1.1.1.2 | OCTET STRING | read-only | ISDN port statuses. There are 62 bytes totally. Every byte indicates the statuses of two ports. That is, every 4 bits indicate status of one port. This object can totally indicate statuses of 124 ISDN ports. The following is the corresponding relations between port statuses and 4-bit values indicating corresponding port status. 0 NOINSTALL Uninstalled 1 IDLE Idle 2 BUSY Busy 3 FAULT Fault 4 TESTING Test 5 BLOCK Blocked 6 OTHER Other 15 NO-MEANING No meaning If VSP contains less than 124 ports, those exceeding the number of ISDN ports of this board are indicated with 15 NO-MEANING. For HSP board, this object has its meaning. For VSP board, only DSP ports are provided and NOINSTALL is used for all ports of this object. |
| OCT vspPortStatusDSPPortStatus | 1.3.6.1.4.1.2011.2.3.4.3.1.1.1.3 | OCTET STRING | read-only | DSP port statuses. There are 60 bytes totally. Every byte indicates statuses of two ports. That is, every 4 bits indicate status of one port. This object can totally indicate statuses of 120 DSP ports. The following is the corresponding relations between port statuses and 4-bit values indicating corresponding port status. 0 NOINSTALL Uninstalled 1 IDLE Idle 2 BUSY Busy 3 FAULT Fault 4 TESTING Test 5 BLOCK Blocked 6 OTHER Other 15 NO-MEANING No meaning If VSP contains less than 120 ports, those exceeding the number of DSP ports of this board are indicated with 15 NO-MEANING. For VSP board, this object has its meaning. For HSP board, only ISDN ports are provided and NOINSTALL is used for all ports of this object. |
| vspPortStatisticsTable | 1.3.6.1.4.1.2011.2.3.4.3.1.3 | not-accessible | Port statistics table of VSP board and HSP board. It contains the numbers of DSP ports and IDSN ports in various statuses of VSP board or HSP board. | |
| vspPortStatisticsEntry | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1 | not-accessible | It contains objects describing numbers of DSP ports and IDSN ports in various statuses of VSP board or HSP board. | |
| INT vspPortStatisticsSlotNo | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.1 | INTEGER | not-accessible | Slot number of VSP board or HSP board. It forms the index of this table. |
| INT vspPortStatisticsISDNTotalPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.2 | INTEGER | read-only | Number of total ISDN ports of this HSP board. For VSP board, this object is 0. |
| INT vspPortStatisticsISDNNoInstallPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.3 | INTEGER | read-only | Number of uninstalled ISDN ports of this HSP board. For VSP board, this object is 0. |
| INT vspPortStatisticsISDNIdelPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.4 | INTEGER | read-only | Number of idle ISDN ports of this HSP board. For VSP board, this object is 0. |
| INT vspPortStatisticsISDNBusyPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.5 | INTEGER | read-only | Number of busy ISDN ports of this HSP board. For VSP board, this object is 0. |
| INT vspPortStatisticsISDNFaultPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.6 | INTEGER | read-only | Number of fault ISDN ports of this HSP board. For VSP board, this object is 0. |
| INT vspPortStatisticsISDNTestPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.7 | INTEGER | read-only | Number of test ISDN ports of this HSP board. For VSP board, this object is 0. |
| INT vspPortStatisticsISDNBlockPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.8 | INTEGER | read-only | Number of blocked ISDN ports of this HSP board. For VSP board, this object is 0. |
| INT vspPortStatisticsISDNOtherPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.9 | INTEGER | read-only | Number of ISDN ports in other statuses of this HSP board. For VSP board, this object is 0. |
| INT vspPortStatisticsDSPTotalPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.10 | INTEGER | read-only | Number of total DSP ports of this VSP board. For HSP board, this object is 0. |
| INT vspPortStatisticsDSPNoInstallPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.11 | INTEGER | read-only | Number of uninstalled DSP ports of this VSP board. For HSP board, this object is 0. |
| INT vspPortStatisticsDSPIdelPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.12 | INTEGER | read-only | Number of idle DSP ports of this VSP board. For HSP board, this object is 0. |
| INT vspPortStatisticsDSPBusyPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.13 | INTEGER | read-only | Number of busy DSP ports of this VSP board. For HSP board, this object is 0. |
| INT vspPortStatisticsDSPFaultPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.14 | INTEGER | read-only | Number of fault DSP ports of this VSP board. For HSP board, this object is 0. |
| INT vspPortStatisticsDSPTestPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.15 | INTEGER | read-only | Number of test DSP ports of this VSP board. For HSP board, this object is 0. |
| INT vspPortStatisticsDSPBlockPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.16 | INTEGER | read-only | Number of blocked DSP ports of this VSP board. For HSP board, this object is 0. |
| INT vspPortStatisticsDSPOtherPorts | 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.17 | INTEGER | read-only | Number of DSP ports in other statuses of this VSP board. For HSP board, this object is 0. |
| vspServiceInfoGroup | 1.3.6.1.4.1.2011.2.3.4.3.2 | |||
| vspNASCallTable | 1.3.6.1.4.1.2011.2.3.4.3.2.1 | not-accessible | Access service call status table of VSP board and HSP board. It describes the information of various statuses of calls through ports of VSP board and HSP board. | |
| vspNASCallEntry | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1 | not-accessible | It contains objects describing call status information of VSP board and HSP board. | |
| INT vspNASCallSlotNo | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.1 | INTEGER | not-accessible | Slot number of VSP board or HSP board. It forms the index of this table. |
| INT vspNASCallPortNo | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.2 | INTEGER | not-accessible | Port number of VSP board or HSP board. For VSP board, it is DSP port number and the range is 0-199. For HSP board, it is ISDN port and the range is 0-123. |
| INT vspNASCallPortType | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.3 | INTEGER | read-only | Port type. It indicates the port is an MODEM port or an ISDN port. MODEM port is DSP port that we usually say. |
| INT vspNASCallValidFlag | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.4 | INTEGER | read-only | Call validity flag. It indicates whether there is any call through this port currently. invalid(1) indicates that there is no call through the port currently and the data has no meaning. valid(2) indicates that there is a call through this port. |
| DAT vspNASCallStartingTime | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.5 | DateAndTime | read-only | Start time of this call. If vspNASCallValidFlag is invalid, this object returns 0000 year 0 moth 0 date 0 hour 0 minute 0 second. |
| STR vspNASCallCallingNumber | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.6 | DisplayString | read-only | Calling number of this call. If vspNASCallValidFlag is invalid, this object will return NULL. |
| STR vspNASCallCalledNumber | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.7 | DisplayString | read-only | Called number of this call. If vspNASCallValidFlag is invalid, this object will return NULL. |
| INT vspNASCallDataRate | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.8 | INTEGER | read-only | Receiving speed rate. The receive rate for ISDN calls or the baud rate for modem calls. A value of 0 is returned if entry is invalid. |
| INT vspNASCallXmitRate | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.9 | INTEGER | read-only | Sending speed rate. The transmit rate for ISDN calls or the baud rate for modem calls. A value of 0 is returned if entry is invalid. |
| INT vspNASCallDirection | 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.10 | INTEGER | read-only | Call direction. A value of no-meaning(3) is returned if entry is invalid |
| vspNASSessionTable | 1.3.6.1.4.1.2011.2.3.4.3.2.2 | not-accessible | Access service session information table of VSP board and HSP board. It describes the information of various statuses of connection users through ports of VSP board. | |
| vspNASSessionEntry | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1 | not-accessible | It contains objects describing connection user information of VSP board and HSP board. | |
| INT vspNASSessionSlotNo | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.1 | INTEGER | not-accessible | Slot number of VSP board or HSP board. It forms the index of this table |
| INT vspNASSessionPortNo | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.2 | INTEGER | not-accessible | Port number of VSP board or HSP board. For VSP board, it is a DSP port and the range is 0-119. For HSP board, it is an ISDN port and the range is 0-123. |
| INT vspNASSessionValidFlag | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.3 | INTEGER | read-write | Session validity flag. invalid(1) indicates that there is no user connected through this port currently and the data has no meaning. valid(2) indicates that there is an user connected through this port currently. If this object is valid(2), setting this object to be invalid(1) via NM station will break user connection through this port. |
| INT vspNASSessionUserGroup | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.4 | INTEGER | read-only | User group. This device supports virtual ISP and there is user group concept. The user group range is 1-300. If the validity flag is invalid(1), this object returns 0. |
| STR vspNASSessionUserName | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.5 | DisplayString | read-only | User name. If the validity flag is invalid(1), this object will return NULL. |
| IP vspNASSessionUserIPAddress | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.6 | IpAddress | read-only | User IP address. If the validity flag is invalid(1), this object will return 0.0.0.0. |
| IP vspNASSessionUserSubNetMask | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.7 | IpAddress | read-only | User IP address subnet mask. If the validity flag is invalid(1), this object will return 0.0.0.0. |
| INT vspNASSessionServiceType | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.8 | INTEGER | read-only | User service type. If the validity flag is invalid(1), this object will return none(1). |
| STR vspNASSessionUserCallingNumber | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.9 | DisplayString | read-only | Calling number. If the validity flag is invalid(1), this object will return NULL. |
| INT vspNASSessionUserOnlineTime | 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.10 | INTEGER | read-only | Connection duration. The unit is second. If the validity flag is invalid(1), this object will return NULL. |
| vspNASCallStatisticsTable | 1.3.6.1.4.1.2011.2.3.4.3.2.5 | not-accessible | Access service call statistics table of VSP board and HSP board. It contains the connection information statistics of various calls since board reset. | |
| vspNASCallStatisticsEntry | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1 | not-accessible | It contains objects describing call connection statistics information of VSP board and HSP board. | |
| INT vspNASCallStatisticsSlotNo | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.1 | INTEGER | not-accessible | Slot number of VSP board or HSP board. It forms the index of this table. |
| INT vspNASCallStatisticsCurrentAnalogIncoming | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.2 | INTEGER | read-only | Number of current analog incoming calls. The number of current analog incoming calls on this VSP board is returned. |
| INT vspNASCallStatisticsCurrentAnalogOutgoing | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.3 | INTEGER | read-only | Number of current analog outgoing calls. The number of current analog outgoing calls on this board is returned |
| INT vspNASCallStatisticsCurrentDigitalIncoming | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.4 | INTEGER | read-only | Number of current digital incoming calls. The number of current analog incoming calls on this VSP board is returned. |
| INT vspNASCallStatisticsCurrentDigitalOutgoing | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.5 | INTEGER | read-only | Number of current digital outgoing calls. The number of current digital outgoing calls on this board is returned |
| INT vspNASCallStatisticsCurrentV110Incoming | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.6 | INTEGER | read-only | Number of current V110 incoming calls. The current number of V.110 incoming calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsCurrentV110Outgoing | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.7 | INTEGER | read-only | Number of current V110 outgoing calls. The current number of V.110 outgoing calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsCurrentV120Incoming | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.8 | INTEGER | read-only | Number of current V120 incoming calls. The current number of V.120 incoming calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsCurrentV120Outgoing | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.9 | INTEGER | read-only | Number of current V120 outgoing calls. The current number of V.120 outgoing calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsCurrentAnalogLogonSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.10 | INTEGER | read-only | Number of current analog connection successes. Connection success means that an user gets online normally. |
| INT vspNASCallStatisticsCurrentDigitalLogonSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.11 | INTEGER | read-only | Number of current digital connection successes |
| INT vspNASCallStatisticsCurrentV110LogonSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.12 | INTEGER | read-only | Number of current V110 connection successes |
| INT vspNASCallStatisticsCurrentV120LogonSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.13 | INTEGER | read-only | Number of current V120 connection successes |
| INT vspNASCallStatisticsTotalAnalogIncoming | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.14 | INTEGER | read-only | Number of total analog incoming calls since the last board restart or the last variable clear. The total number of analog incoming calls since system bootup or last clear of the variable is returned. s |
| INT vspNASCallStatisticsTotalAnalogOutgoing | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.15 | INTEGER | read-only | Number of total analog outgoing calls since the last board restart or the last variable clear. The total number of analog outgoing calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsTotalDigitalIncoming | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.16 | INTEGER | read-only | Number of total digital incoming calls since the last board restart or the last variable clear. The total number of digital incoming calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsTotalDigitalOutgoing | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.17 | INTEGER | read-only | Number of total digital outgoing calls since the last board restart or the last variable clear. The total number of digital outgoing calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsTotalV110Incoming | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.18 | INTEGER | read-only | Number of total V110 incoming calls since the last board restart or the last variable clear. The total number of V.110 incoming calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsTotalV110Outgoing | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.19 | INTEGER | read-only | Number of total V110 outgoing calls since the last board restart or the last variable clear. The total number of V.110 outgoing calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsTotalV120Incoming | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.20 | INTEGER | read-only | Number of total V120 incoming calls since the last board restart or the last variable clear. The total number of V.120 incoming calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsTotalV120Outgoing | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.21 | INTEGER | read-only | Number of total V120 outgoing calls since the last board restart or the last variable clear. The total number of V.120 outgoing calls since system bootup or last clear of the variable is returned. |
| INT vspNASCallStatisticsTotalAnalogLogonSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.22 | INTEGER | read-only | Number of total analog connection successes since the last board restart or the last variable clear. |
| INT vspNASCallStatisticsTotalDigitalLogonSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.23 | INTEGER | read-only | Number of total digital connection successes since the last board restart or the last variable clear. |
| INT vspNASCallStatisticsTotalV110LogonSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.24 | INTEGER | read-only | Number of total V110 connection successes since the last board restart or the last variable clear. |
| INT vspNASCallStatisticsTotalV120LogonSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.25 | INTEGER | read-only | Number of total V120 connection successes since the last board restart or the last variable clear. |
| INT vspNASCallStatisticsTotalAnalogLogoutSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.26 | INTEGER | read-only | Number of total normal analog disconnections since the last board restart or the last variable clear. Normal disconnection means that an user, after he succeeds in connection, makes an active hangup and then is disconnected instead of being disconnected due to other abnormal causes. |
| INT vspNASCallStatisticsTotalDigitalLogoutSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.27 | INTEGER | read-only | Number of total normal digital disconnections since the last board restart or the last variable clear. |
| INT vspNASCallStatisticsTotalV110LogoutSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.28 | INTEGER | read-only | Number of total normal V110 disconnections since the last board restart or the last variable clear. |
| INT vspNASCallStatisticsTotalV120LogoutSuc | 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.29 | INTEGER | read-only | Number of total normal V120 disconnections since the last board restart or the last variable clear. |
| hrb_board | 1.3.6.1.4.1.2011.2.3.4.4 | |||
| hrbBaseInfoGroup | 1.3.6.1.4.1.2011.2.3.4.4.1 | |||
| mstu_board | 1.3.6.1.4.1.2011.2.3.4.5 | |||
| mstuPerfomConfigGroup | 1.3.6.1.4.1.2011.2.3.4.5.1 | |||
| mstuPerfomInfoGroup | 1.3.6.1.4.1.2011.2.3.4.5.2 | |||
| mstuPerfomResetGroup | 1.3.6.1.4.1.2011.2.3.4.5.3 | |||
| mstuPerfomSpendingGroup | 1.3.6.1.4.1.2011.2.3.4.5.4 | |||
| mstuSDHLoopGroup | 1.3.6.1.4.1.2011.2.3.4.5.5 | |||
| mstuTributaryNumGroup | 1.3.6.1.4.1.2011.2.3.4.5.6 |
RFC description
Monitors Huawei Expert V2 access server device status including board information, system configuration, and performance metrics.
Start monitoring Huawei access-server / SMB gateway board hardware with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.