ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB

All MIBs › ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB

Organization: Ericsson AB.

Last Updated: 2017-12-06

Category: Domain: Subscriber Management, Vendor: Ericsson

Description: Monitors active subscriber session counts, types, and resource usage on Ericsson broadband routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB?

ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB manages visibility into currently active broadband subscriber sessions on Ericsson SmartEdge edge/BRAS routers. It exposes a table of active subscribers with session identifiers, access-circuit description, start time, and access medium/NAS port type, plus control objects to clear or resend accounting for a session. This is squarely a software-status monitoring MIB: it lets an operator track subscriber session counts, detect abnormal churn or stuck sessions, and take remedial action via clear/resend controls. Most objects are scoped per SNMP context (community/contextName), a notable dependency on SNMPv1/v2c community-based or SNMPv3 context-based session partitioning rather than another data MIB. It is deployed in broadband access networks (DSL/PON/cable edge routers) for subscriber session assurance. Engineers can download the ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson SmartEdge broadband/edge routers
BRAS/BNG platforms

Monitoring Examples

eriRouterSubsActiveTable/eriRouterSubsActiveEntry is keyed by eriRouterSubsActiveSessionId and reports eriRouterSubsActiveName, eriRouterSubsActiveStartTime, and eriRouterSubsActiveCircuitDescr for each logged-in subscriber. An operator can poll the table size to catch a spike in unexpected session churn, or invoke eriRouterSubsActiveClear/eriRouterSubsActiveResend on a stuck session whose eriRouterSubsActiveStartTime shows it has been open abnormally long without corresponding accounting records.

What Can Be Monitored

active subscriber session count
session ID and subscriber name
session start time/duration
access circuit description
NAS port/medium type
session clear/resend control actions

Imported Objects

From ERICSSON-ROUTER-SMI

eriRouterMgmt

OBJECT-IDENTITY

From ERICSSON-ROUTER-TC

EriRouterCircuitHandle
EriRouterPercentage
EriRouterPortMediumType
EriRouterSubscriberState

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMP-VIEW-BASED-ACM-MIB

vacmContextName

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
zeroDotZero

From SNMPv2-TC

DateAndTime
RowPointer
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using eriRouterSubsOctetsSent OID:

Select an Ericsson SmartEdge broadband/edge router, BRAS/BNG platform (active subscriber sessions) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type eriRouterSubsOctetsSent into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of octets sent by the circuit. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in octets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
eriRouterSubscriberActiveMib	1.3.6.1.4.1.193.218.2.27			Defines the objects necessary to support the management of active subscribers. All mib objects, except eriRouterSubsCntxtCountTable, defined in the module are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
eriRouterSubsActiveObjects	1.3.6.1.4.1.193.218.2.27.1
eriRouterSubsActive	1.3.6.1.4.1.193.218.2.27.1.1
eriRouterSubsActiveTable	1.3.6.1.4.1.193.218.2.27.1.1.1		not-accessible	This table contains subscriber sessions which have been authenticated on an circuit.
eriRouterSubsActiveEntry	1.3.6.1.4.1.193.218.2.27.1.1.1.1		not-accessible	A conceptual row in the eriRouterSubsActiveTable.
STR eriRouterSubsActiveName	1.3.6.1.4.1.193.218.2.27.1.1.1.1.1	SnmpAdminString	not-accessible	The name identifying this entry. An entry configured by other means may have been given a name whose length is greater than 80. Names which exceed this length are not accessible via SNMP operations.
STR eriRouterSubsActiveSessionId	1.3.6.1.4.1.193.218.2.27.1.1.1.1.2	SnmpAdminString	not-accessible	A value that uniquely identifies an active subscriber session. If RADIUS is being used to configure/authenticate subscribers, this value will appear in the RADIUS Acct-Session-Id attribute.
STR eriRouterSubsActiveCircuitDescr	1.3.6.1.4.1.193.218.2.27.1.1.1.1.3	SnmpAdminString	read-only	A string which provides identifying information (e.g slot/port) of the circuit the subscriber is using.
ERI eriRouterSubsActiveCircuitHandle	1.3.6.1.4.1.193.218.2.27.1.1.1.1.4	EriRouterCircuitHandle	read-only	A value for identifying circuits.
DAT eriRouterSubsActiveStartTime	1.3.6.1.4.1.193.218.2.27.1.1.1.1.5	DateAndTime	read-only	The time when the subscriber became active.
T/F eriRouterSubsActiveClear	1.3.6.1.4.1.193.218.2.27.1.1.1.1.6	TruthValue	read-write	Setting this value to 'true' will clear the active subscriber session. In the case of PPP, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 encapsulated circuits the session is brought down and then back up and an attempt is made to re-authenticate the subscriber. An SNMP get operation always returns 'false'
T/F eriRouterSubsActiveResend	1.3.6.1.4.1.193.218.2.27.1.1.1.1.7	TruthValue	read-write	Setting this value to 'true' will cause a resend of the Radius acct-start packet. An SNMP get operation always returns 'false'
U32 eriRouterSubsActiveNasPortType	1.3.6.1.4.1.193.218.2.27.1.1.1.1.8	Unsigned32	read-only	The RADIUS attribute NAS-Port-Type which indicates the type of the physical port which is authenticating the user.
ERI eriRouterSubsActiveMediumType	1.3.6.1.4.1.193.218.2.27.1.1.1.1.9	EriRouterPortMediumType	read-only	The medium type of the NAS-Port.
T/F eriRouterSubsActiveResendSvcAcct	1.3.6.1.4.1.193.218.2.27.1.1.1.1.10	TruthValue	read-write	Setting this value to 'true' will cause a resend of the Radius acct-start packet for all services associated with the active subscriber session. An SNMP get operation always returns 'false'
ERI eriRouterSubsActiveState	1.3.6.1.4.1.193.218.2.27.1.1.1.1.11	EriRouterSubscriberState	read-only	State of subscriber session.
STR eriRouterSubsActiveSessionNx	1.3.6.1.4.1.193.218.2.27.1.1.1.1.12	SnmpAdminString	read-only	This object returns the same value as eriRouterSubsActiveSessionId, Only difference is it's accessible object.
eriRouterSubsActiveIpTable	1.3.6.1.4.1.193.218.2.27.1.1.2		not-accessible	This table contains IP addresses used by active subscribers.
eriRouterSubsActiveIpEntry	1.3.6.1.4.1.193.218.2.27.1.1.2.1		not-accessible	A conceptual row in the eriRouterSubsActiveIpTable.
IPt eriRouterSubsActiveAddrType	1.3.6.1.4.1.193.218.2.27.1.1.2.1.1	InetAddressType	not-accessible	The address type of eriRouterSubsActiveAddr.
IP eriRouterSubsActiveAddr	1.3.6.1.4.1.193.218.2.27.1.1.2.1.2	InetAddress	read-only	The host IP address of the active subscriber.
U32 eriRouterSubsActiveAddrInt	1.3.6.1.4.1.193.218.2.27.1.1.2.1.3	Unsigned32	read-only	The host IP address of the active subscriber. The value of this object is limited to the IPv4 address. Hence, mustbe used only when eriRouterSubsActiveIpAddrType is of type v4.
eriRouterSubsClear	1.3.6.1.4.1.193.218.2.27.1.1.3
STR eriRouterSubsClearSubscriberName	1.3.6.1.4.1.193.218.2.27.1.1.3.1	SnmpAdminString	read-write	Setting this object to the subscriber name will clear all the sessions associated with the subscriber. In the case of PPP circuit, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 and RFC 1490 encapsulated circuits the circuit is brought down and then back up and an attempt is made to re-authenticate the subscriber bound to the circuit. This object returns a zero-length string when queried.
STR eriRouterSubsClearSessionId	1.3.6.1.4.1.193.218.2.27.1.1.3.2	SnmpAdminString	read-write	A set of this object will clear the subscriber session identified by this value. In the case of PPP circuit, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 and RFC 1490 encapsulated circuits the circuit is brought down and then back up and an attempt is made to re-authenticate the subscriber bound to the circuit. This object returns a zero-length string when queried.
STR eriRouterSubsBounceName	1.3.6.1.4.1.193.218.2.27.1.1.3.3	SnmpAdminString	read-write	Each circuit using CLIPS encapsulation used by the named subscriber is brought down and immediately recreated using the RADIUS Access- Accept attributes. Any other circuit encapsulation type is cleared. This object returns a zero-length string when queried.
STR eriRouterSubsBounceSessionId	1.3.6.1.4.1.193.218.2.27.1.1.3.4	SnmpAdminString	read-write	The circuit using CLIPS encapsulation identified by the RADIUS Acct-Session-Id is brought down and immediately recreated using the RADIUS Access-Accept attributes. Any other circuit encapsulation type is cleared. This object returns a zero-length string when queried.
U32 eriRouterSubsReauthRadiusIndex	1.3.6.1.4.1.193.218.2.27.1.1.3.5	Unsigned32	read-write	An unsigned integer identifying a set of subscribers defined at the RADIUS server which are to be re-authorized. The source of this value and the set of subscribers to be re-authorized are defined outside the context of this mib module. An get of this attribute returns 0.
OCT eriRouterSubsReauthRadiusID	1.3.6.1.4.1.193.218.2.27.1.1.3.6	OCTET STRING	read-write	An octet string identifying a set of subscribers defined at the RADIUS server which are to be re-authorized. The source of this value and the set of subscribers to be re-authorized are defined outside the context of this mib module. This object returns a zero-length string when queried.
STR eriRouterSubsReauthName	1.3.6.1.4.1.193.218.2.27.1.1.3.7	SnmpAdminString	read-write	Used to reauthorize all of the active sessions associated with the given subscriber in the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). This object returns a zero-length string when queried.
STR eriRouterSubsReauthSessionId	1.3.6.1.4.1.193.218.2.27.1.1.3.8	SnmpAdminString	read-write	Used to reauthorize the active session identified by the value of this object and the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). This object returns a zero-length string when queried.
U32 eriRouterSubsClearReason	1.3.6.1.4.1.193.218.2.27.1.1.3.9	Unsigned32	read-write	An unsigned integer value which may be included in the set request for eriRouterSubsClearSubscriberName, eriRouterSubsClearSessionId, eriRouterSubsBounceName, eriRouterSubsBounceSessionId, or any other objects define under the eriRouterSubsClear OID node. The use of this object value is implementation dependent. This object returns 0 when queried.
eriRouterSubsServiceVolumeTable	1.3.6.1.4.1.193.218.2.27.1.1.4		not-accessible	This table specifies service volume information on the subscriber circuits. It contains the volume octet counts for each active subscriber session for which the service is active. All MIB objects defined in the table are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
eriRouterSubsServiceVolumeEntry	1.3.6.1.4.1.193.218.2.27.1.1.4.1		not-accessible	A conceptual row in the EriRouterSubsServiceVolumeTable. Each row contains the service volume limit and volume octet count for each active service session.
U32 eriRouterSubsServiceVolumeLimitIn	1.3.6.1.4.1.193.218.2.27.1.1.4.1.1	Unsigned32	read-write	The volume limit in kilobytes (KB) allowed for the subscriber service to input (or receive) for this subscriber. If the value is 0, then there is no limit.
U32 eriRouterSubsServiceVolumeLimitOut	1.3.6.1.4.1.193.218.2.27.1.1.4.1.2	Unsigned32	read-write	The volume limit in kilobytes (KB) allowed for the subscriber service to output (or transmit) for this subscriber. If the value is 0, then there is no limit.
TIM eriRouterSubsServiceActiveTime	1.3.6.1.4.1.193.218.2.27.1.1.4.1.3	TimeStamp	read-only	The value of sysUpTime when the service became active for this subscriber. If sysUpTime is reset to zero as a result of a reinitialization of the network management (sub)system, then the values of all TimeStamp objects are also reset.
C64 eriRouterSubsServiceVolumeOctetsIn	1.3.6.1.4.1.193.218.2.27.1.1.4.1.4	Counter64	read-only	The subscriber session volume octets in count.
C64 eriRouterSubsServiceVolumeOctetsOut	1.3.6.1.4.1.193.218.2.27.1.1.4.1.5	Counter64	read-only	The subscriber session volume octets out count.
C64 eriRouterSubsServiceVolumePktsIn	1.3.6.1.4.1.193.218.2.27.1.1.4.1.6	Counter64	read-only	The subscriber session volume packet in count.
C64 eriRouterSubsServiceVolumePktsOut	1.3.6.1.4.1.193.218.2.27.1.1.4.1.7	Counter64	read-only	The subscriber session volume packet out count.
C64 eriRouterSubsIPv4ServiceVolumeOctetsIn	1.3.6.1.4.1.193.218.2.27.1.1.4.1.8	Counter64	read-only	The subscriber session volume IPv4 octets in count.
C64 eriRouterSubsIPv4ServiceVolumeOctetsOut	1.3.6.1.4.1.193.218.2.27.1.1.4.1.9	Counter64	read-only	The subscriber session volume IPv4 octets out count.
C64 eriRouterSubsIPv4ServiceVolumePktsIn	1.3.6.1.4.1.193.218.2.27.1.1.4.1.10	Counter64	read-only	The subscriber session volume IPv4 packet in count.
C64 eriRouterSubsIPv4ServiceVolumePktsOut	1.3.6.1.4.1.193.218.2.27.1.1.4.1.11	Counter64	read-only	The subscriber session volume IPv4 packet out count.
C64 eriRouterSubsIPv6ServiceVolumeOctetsIn	1.3.6.1.4.1.193.218.2.27.1.1.4.1.12	Counter64	read-only	The subscriber session volume IPv6 octets in count.
C64 eriRouterSubsIPv6ServiceVolumeOctetsOut	1.3.6.1.4.1.193.218.2.27.1.1.4.1.13	Counter64	read-only	The subscriber session volume IPv6 octets out count.
C64 eriRouterSubsIPv6ServiceVolumePktsIn	1.3.6.1.4.1.193.218.2.27.1.1.4.1.14	Counter64	read-only	The subscriber session volume IPv6 packet in count.
C64 eriRouterSubsIPv6ServiceVolumePktsOut	1.3.6.1.4.1.193.218.2.27.1.1.4.1.15	Counter64	read-only	The subscriber session volume IPv6 packet out count.
eriRouterSubsServicesTable	1.3.6.1.4.1.193.218.2.27.1.1.5		not-accessible	This table contains services available to subscribers.
eriRouterSubsServicesEntry	1.3.6.1.4.1.193.218.2.27.1.1.5.1		not-accessible	A conceptual row in the eriRouterSubsServicesTable.
I32 eriRouterSubsServiceIndex	1.3.6.1.4.1.193.218.2.27.1.1.5.1.1	Integer32	not-accessible	A unique index assigned to the entry.
STR eriRouterSubsServiceName	1.3.6.1.4.1.193.218.2.27.1.1.5.1.2	SnmpAdminString	read-only	The name identifying the service.
STR eriRouterSubsServiceTag	1.3.6.1.4.1.193.218.2.27.1.1.5.1.3	SnmpAdminString	read-only	A tag associated with the service name which may provide additional qualification to the name.
eriRouterSubsActiveSessionTable	1.3.6.1.4.1.193.218.2.27.1.1.6		not-accessible	This table contains active subscriber sessions which have been authenticated on an circuit.
eriRouterSubsActiveSessionEntry	1.3.6.1.4.1.193.218.2.27.1.1.6.1		not-accessible	A conceptual row in the eriRouterSubsActiveSessionTable.
STR eriRouterSubsActiveSessionSubscriberName	1.3.6.1.4.1.193.218.2.27.1.1.6.1.1	SnmpAdminString	read-only	The subscriber name associated with this session.
NUM eriRouterSubsActiveSessionPointer	1.3.6.1.4.1.193.218.2.27.1.1.6.1.2	RowPointer	read-only	A pointer to the row in eriRouterSubsActiveTable to which this session belongs. May be {0 0} if there is no such row.
eriRouterSubsActiveIpAddrTable	1.3.6.1.4.1.193.218.2.27.1.1.7		not-accessible	This table contains IPv4/IPv6 addresses used by active subscriber sessions.
eriRouterSubsActiveIpAddrEntry	1.3.6.1.4.1.193.218.2.27.1.1.7.1		not-accessible	A conceptual row in the eriRouterSubsActiveIpAddrTable.
IPt eriRouterSubsActiveIpAddrType	1.3.6.1.4.1.193.218.2.27.1.1.7.1.1	InetAddressType	read-only	The address type of eriRouterSubsActiveIpAddr.
IP eriRouterSubsActiveIpAddr	1.3.6.1.4.1.193.218.2.27.1.1.7.1.2	InetAddress	read-only	The address prefix. The address type of this object is specified in eriRouterSubsActiveIpAddrType. The length of this object is the standard length for objects of that type (4 or 16 bytes). Any bits after eriRouterSubsActiveIpPfxLen must be zero.
ADR eriRouterSubsActiveIpPfxLen	1.3.6.1.4.1.193.218.2.27.1.1.7.1.3	InetAddressPrefixLength	read-only	The prefix length associated with this prefix. For IPv4 active subscriber session, the prefix length is always 32.
STR eriRouterSubsActiveIpAddrDescr	1.3.6.1.4.1.193.218.2.27.1.1.7.1.4	SnmpAdminString	read-only	Human readable textual format of IP address.
eriRouterSubsActiveIpv4GlobalTable	1.3.6.1.4.1.193.218.2.27.1.1.8		not-accessible	This table contains information about the active subscribers in the system. A walk on the table with a specific context would return only those active subscribers belonging to the context. A walk on this table with context local would return all the active subscribers across all contexts in the system. A walk on this table without specifying any context would return all active subscribers across all contexts in the system. This table is supported only for IPv4 subscribers and will not be instantiated for single stack IPv6 subscriber.
eriRouterSubsActiveIpv4GlobalEntry	1.3.6.1.4.1.193.218.2.27.1.1.8.1		not-accessible	A conceptual row in the eriRouterSubsActiveIpv4GlobalTable.
STR eriRouterSubsActiveIpv4GlobalSessionId	1.3.6.1.4.1.193.218.2.27.1.1.8.1.1	SnmpAdminString	read-only	The session ID for the active subscriber. This object returns the same value as Acct-Session-ID AVP used for subscriber accounting.
STR eriRouterSubsActiveIpv4GlobalName	1.3.6.1.4.1.193.218.2.27.1.1.8.1.2	SnmpAdminString	read-only	The Username for the active subscriber. User name can be of the format name@context or name@domain.
IP eriRouterSubsActiveIpv4GlobalAddress	1.3.6.1.4.1.193.218.2.27.1.1.8.1.3	IpAddress	read-only	The IPv4 address assigned to the active subscriber. For dual stack subscriber, the address of the IPv4 stack is returned.
IP eriRouterSubsActiveIpv4GlobalMask	1.3.6.1.4.1.193.218.2.27.1.1.8.1.4	IpAddress	read-only	The IPv4 subnet mask assigned to the active subscriber. The subnet mask is always 255.255.255.255.
eriRouterSubsStats	1.3.6.1.4.1.193.218.2.27.1.2
eriRouterSubsCntxtCountTable	1.3.6.1.4.1.193.218.2.27.1.2.1		not-accessible	This table contains counts of active subscribers by context name. Unlike any of the other tables in this mib module, all rows in this table are accessible when the context 'local' is specified in the snmp message, unless restricted by entries in the vacmAccessTable. Snmp requests using other contexts shall return only the row which matches the context.
eriRouterSubsCntxtCountEntry	1.3.6.1.4.1.193.218.2.27.1.2.1.1		not-accessible	The conceptual row containing the count of active subscribers for each context.
G32 eriRouterSubsCntxtCount	1.3.6.1.4.1.193.218.2.27.1.2.1.1.1	Gauge32	read-only	The count of active subscribers with either IPv4 or IPv6 or both stack UP.
G32 eriRouterSubsCntxtIp4OnlyCount	1.3.6.1.4.1.193.218.2.27.1.2.1.1.2	Gauge32	read-only	The count of IPv4 active subscribers which are authorized for only IPv4 protocol stack. This counter does not include subscribers authorized for dual IPv4/IPv6 protocol stack.
G32 eriRouterSubsCntxtIp6OnlyCount	1.3.6.1.4.1.193.218.2.27.1.2.1.1.3	Gauge32	read-only	The count of IPv6 active subscribers which are authorized for only IPv6 protocol stack. This counter does not include subscribers authorized for dual IPv4/IPv6 protocol stack.
G32 eriRouterSubsCntxtDualCount	1.3.6.1.4.1.193.218.2.27.1.2.1.1.4	Gauge32	read-only	The count of active subscribers which are authorized for both IPv4 and IPv6 for the context. At any time either one or both stacks may be UP.
G32 eriRouterSubsCntxtLacCount	1.3.6.1.4.1.193.218.2.27.1.2.1.1.5	Gauge32	read-only	The count of active LAC subscribers.
eriRouterSubsEncapsCountTable	1.3.6.1.4.1.193.218.2.27.1.2.2		not-accessible	This table contains counts of active subscribers by encapsulation type.
eriRouterSubsEncapsCountEntry	1.3.6.1.4.1.193.218.2.27.1.2.2.1		not-accessible	A conceptual row in the eriRouterSubsEncapsCountTable.
INT eriRouterSubsEncapsulationType	1.3.6.1.4.1.193.218.2.27.1.2.2.1.1	INTEGER	not-accessible	This object identifies the type of encapsulation the subscriber is using. Note that 'ppp' includes all types of supported ppp, excluding pppoe.
G32 eriRouterSubsEncapsCount	1.3.6.1.4.1.193.218.2.27.1.2.2.1.2	Gauge32	read-only	The count of active subscribers for the encapsulation type.
eriRouterSubsStatsTable	1.3.6.1.4.1.193.218.2.27.1.2.3		not-accessible	This table contains counters for individual circuits.
eriRouterSubsStatsEntry	1.3.6.1.4.1.193.218.2.27.1.2.3.1		not-accessible	A conceptual row in the eriRouterSubsStatsTable.
C64 eriRouterSubsOctetsSentEx	1.3.6.1.4.1.193.218.2.27.1.2.3.1.1	Counter64	read-only	The number of octets sent by the circuit. This counter includes multicast activity.
C64 eriRouterSubsOctetsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.2	Counter64	read-only	The number of octets received by the circuit. This counter includes multicast activity.
C64 eriRouterSubsPktsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.3	Counter64	read-only	The number of packets sent by the circuit. This counter includes multicast activity.
C64 eriRouterSubsPktsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.4	Counter64	read-only	The number of packets received by the circuit. This counter includes multicast activity.
C32 eriRouterSubsXmitOctetsDropped	1.3.6.1.4.1.193.218.2.27.1.2.3.1.5	Counter32	read-only	The number of octets dropped by the circuit before transmission.
C32 eriRouterSubsXmitPktsDropped	1.3.6.1.4.1.193.218.2.27.1.2.3.1.6	Counter32	read-only	The number of packets dropped by the circuit before transmission.
C64 eriRouterSubsMcastOctetsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.7	Counter64	read-only	The number of multicast octets sent by the circuit.
C64 eriRouterSubsMcastOctetsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.8	Counter64	read-only	The number of multicast octets received by the circuit.
C64 eriRouterSubsMcastPktsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.9	Counter64	read-only	The number of multicast packets sent by the circuit.
C64 eriRouterSubsMcastPktsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.10	Counter64	read-only	The number of multicast packets received by the circuit.
C64 eriRouterSubsIPv4OctetsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.11	Counter64	read-only	The number of IPv4 octets sent by the circuit. This counter includes multicast activity.
C64 eriRouterSubsIPv4OctetsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.12	Counter64	read-only	The number of IPv4 octets received by the circuit. This counter includes multicast activity.
C64 eriRouterSubsIPv6OctetsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.13	Counter64	read-only	The number of IPv6 octets sent by the circuit. This counter includes multicast activity.
C64 eriRouterSubsIPv6OctetsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.14	Counter64	read-only	The number of IPv6 octets received by the circuit. This counter includes multicast activity.
C64 eriRouterSubsIPv4PktsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.15	Counter64	read-only	The number of IPv4 packets sent by the circuit. This counter includes multicast activity.
C64 eriRouterSubsIPv4PktsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.16	Counter64	read-only	The number of IPv4 packets received by the circuit. This counter includes multicast activity.
C64 eriRouterSubsIPv6PktsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.17	Counter64	read-only	The number of IPv6 packets sent by the circuit. This counter includes multicast activity.
C64 eriRouterSubsIPv6PktsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.18	Counter64	read-only	The number of IPv6 packets received by the circuit. This counter includes multicast activity.
C64 eriRouterSubsIPv4McastOctetsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.19	Counter64	read-only	The number of IPv4 multicast octets sent by the circuit.
C64 eriRouterSubsIPv4McastOctetsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.20	Counter64	read-only	The number of IPv4 multicast octets received by the circuit.
C64 eriRouterSubsIPv6McastOctetsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.21	Counter64	read-only	The number of IPv6 multicast octets sent by the circuit.
C64 eriRouterSubsIPv6McastOctetsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.22	Counter64	read-only	The number of IPv6 multicast octets received by the circuit.
C64 eriRouterSubsIPv4McastPktsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.23	Counter64	read-only	The number of IPv4 multicast packets sent by the circuit.
C64 eriRouterSubsIPv4McastPktsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.24	Counter64	read-only	The number of IPv4 multicast packets received by the circuit.
C64 eriRouterSubsIPv6McastPktsSent	1.3.6.1.4.1.193.218.2.27.1.2.3.1.25	Counter64	read-only	The number of IPv6 multicast packets sent by the circuit.
C64 eriRouterSubsIPv6McastPktsReceived	1.3.6.1.4.1.193.218.2.27.1.2.3.1.26	Counter64	read-only	The number of IPv6 multicast packets received by the circuit.
eriRouterSubsProfileCountTable	1.3.6.1.4.1.193.218.2.27.1.2.4		not-accessible	This table contains counts of active subscribers by encapsulation type.
eriRouterSubsProfileCountEntry	1.3.6.1.4.1.193.218.2.27.1.2.4.1		not-accessible	A conceptual row in the eriRouterSubsProfileCountTable.
STR eriRouterSubsProfileName	1.3.6.1.4.1.193.218.2.27.1.2.4.1.1	SnmpAdminString	not-accessible	The profile name which applies to a set of subscribers.
G32 eriRouterSubsProfileCount	1.3.6.1.4.1.193.218.2.27.1.2.4.1.2	Gauge32	read-only	The count of active subscribers for the profile name.
eriRouterSubsLicense	1.3.6.1.4.1.193.218.2.27.1.2.5
G32 eriRouterSubsMaxSupportedSessions	1.3.6.1.4.1.193.218.2.27.1.2.5.1	Gauge32	read-only	The maximum number of active subscriber sessions that are supported on the SmartEdge router.
G32 eriRouterSubsLicensedSessions	1.3.6.1.4.1.193.218.2.27.1.2.5.2	Gauge32	read-only	The number of licensed subscriber sessions on the SmartEdge router.
G32 eriRouterSubsActiveSessions	1.3.6.1.4.1.193.218.2.27.1.2.5.3	Gauge32	read-only	The number of active subscriber sessions on the SmartEdge router.
ERI eriRouterSubsCapacityPercentageUsed	1.3.6.1.4.1.193.218.2.27.1.2.5.4	EriRouterPercentage	read-only	The percentage of licensed subscriber sessions in use on the SmartEdge router. This value is computed as: if eriRouterSubsLicensedSessions equals 0 then if eriRouterSubsActiveSessions equals 0 then 0 else 100 else MIN((eriRouterSubsActiveSessions * 100)/eriRouterSubsLicensedSessions), 100).
eriRouterSubsNotify	1.3.6.1.4.1.193.218.2.27.1.3
T/F eriRouterSubsNotifyEnable	1.3.6.1.4.1.193.218.2.27.1.3.1	TruthValue	read-write	This object will provide a mechanism for enabling and disabling subscriber notifications. A value of 1 (true) indicates that subscriber notifications are enabled. A value of 2 (false) indicates that subscriber notifications are disabled.
STR eriRouterSubsConfigErrorMsgs	1.3.6.1.4.1.193.218.2.27.1.3.2	SnmpAdminString	accessible-for-notify	Detailed error messages that describes the mis-configured attributes that failed authentication.
eriRouterSubsActiveConformance	1.3.6.1.4.1.193.218.2.27.2
eriRouterSubsCompliances	1.3.6.1.4.1.193.218.2.27.2.1
eriRouterSubsCompliance	1.3.6.1.4.1.193.218.2.27.2.1.1			The compliance statement for SNMP entities which implement the Subscriber MIB. This compliance is replaced by eriRouterSubsCompliance2
eriRouterSubsCompliance2	1.3.6.1.4.1.193.218.2.27.2.1.2			The compliance statement for SNMP entities which implement the Subscriber MIB. This compliance is replaced by eriRouterSubsCompliance3
eriRouterSubsCompliance3	1.3.6.1.4.1.193.218.2.27.2.1.3			The compliance statement for SNMP entities which implement the Subscriber MIB. This compliance is replaced by eriRouterSubsCompliance4.
eriRouterSubsCompliance4	1.3.6.1.4.1.193.218.2.27.2.1.4			The compliance statement for SNMP entities which implement the Subscriber MIB.
eriRouterSubsCompliance5	1.3.6.1.4.1.193.218.2.27.2.1.5			The compliance statement for SNMP entities which implement the Subscriber MIB.
eriRouterSubsCompliance6	1.3.6.1.4.1.193.218.2.27.2.1.6			The compliance statement for SNMP entities which implement the Subscriber MIB.
eriRouterSubsGroups	1.3.6.1.4.1.193.218.2.27.2.2
eriRouterSubsActiveGroup	1.3.6.1.4.1.193.218.2.27.2.2.1			The collection of objects which represent an active subscriber. This group is replaced by eriRouterSubsActiveGroup2.
eriRouterSubsStatsGroup	1.3.6.1.4.1.193.218.2.27.2.2.2			The collection of objects which are generic counters of subscriber activity. This group is replaced by eriRouterSubsStatsGroup2
eriRouterSubsActiveGroup2	1.3.6.1.4.1.193.218.2.27.2.2.3			The collection of objects which represent an active subscriber.
eriRouterSubsStatsGroup2	1.3.6.1.4.1.193.218.2.27.2.2.4			The collection of objects which are generic counters of subscriber activity.
eriRouterSubsActiveGroup3	1.3.6.1.4.1.193.218.2.27.2.2.5			The collection of objects which represent an active subscriber. This collection includes the objects eriRouterSubsActiveNasPortType and eriRouterSubsActiveMediumType.
eriRouterSubsServicesGroup	1.3.6.1.4.1.193.218.2.27.2.2.6			The collection of objects which represent Service Volume attributes.
eriRouterSubsNotifyObjectGroup	1.3.6.1.4.1.193.218.2.27.2.2.7			The collection of objects related to subscriber notifications.
eriRouterSubsNotifyGroup	1.3.6.1.4.1.193.218.2.27.2.2.8			Notification for tracking the failed attributes of subscriber active sessions.
eriRouterSubsLicenseGroup	1.3.6.1.4.1.193.218.2.27.2.2.9			The collection of objects related to subscriber licenses.
eriRouterSubsActiveGroup4	1.3.6.1.4.1.193.218.2.27.2.2.10			The collection of objects which represent an active subscriber. This collection includes the objects eriRouterSubsActiveNasPortType and eriRouterSubsActiveMediumType.
eriRouterSubsStatsGroup3	1.3.6.1.4.1.193.218.2.27.2.2.11			The collection of objects which are generic counters of subscriber activity.
eriRouterSubsActiveNotifications	1.3.6.1.4.1.193.218.2.27.3
eriRouterSubsNotifyPrefix	1.3.6.1.4.1.193.218.2.27.3.0
NTF eriRouterSubsConfigErrorEvent	1.3.6.1.4.1.193.218.2.27.3.0.1			This notification signifies that the subscriber session received one or more attribute(s) referring non-existing configuration, and the subscriber session is allowed to stay up.

RFC description

Manages active subscriber information in Ericsson router systems, providing subscriber context and state tracking.

Start monitoring Ericsson SmartEdge broadband/edge router, BRAS/BNG platform (active subscriber sessions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB