ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB :: eriRouterSubsActiveClear

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB › eriRouterSubsActiveClear

eriRouterSubsActiveClear

Module: ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB

OID (symbolic): ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB::eriRouterSubsActiveClear

OID (numeric): 1.3.6.1.4.1.193.218.2.27.1.1.1.1.6

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Setting this value to 'true' will clear the active subscriber session. In the case of PPP, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 encapsulated circuits the session is brought down and then back up and an attempt is made to re-authenticate the subscriber.

An SNMP get operation always returns 'false'

What is eriRouterSubsActiveClear?

A write-only trigger: setting it to true tears down the active subscriber session, forcing PPP to renegotiate or an RFC 1483 circuit to bounce and re-authenticate. A GET always reads back false, so use it as a fire-and-forget "kick this subscriber off" control during support or troubleshooting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.218.2.27.1.1.1.1.6
snmpwalk -v2c -c public <target> ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB::eriRouterSubsActiveClear

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.218.2.27.1.1.1.1.6.1
snmpget -v2c -c public <target> ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB::eriRouterSubsActiveClear.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.193.218.2.27.1.1.1.1.6.1 s <value>

Start monitoring Ericsson SmartEdge broadband/edge router, BRAS/BNG platform (active subscriber sessions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB::eriRouterSubsActiveClear OID value, configure state conditions and alerts, and monitor any Ericsson SmartEdge broadband/edge router, BRAS/BNG platform (active subscriber sessions) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.218eriRouterSMIERICSSON-ROUTER-SMI
1.3.6.1.4.1.193.218.2eriRouterMgmtERICSSON-ROUTER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.218.2.27eriRouterSubscriberActiveMibERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB
1.3.6.1.4.1.193.218.2.27.1eriRouterSubsActiveObjectsERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB
1.3.6.1.4.1.193.218.2.27.1.1eriRouterSubsActiveERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB
1.3.6.1.4.1.193.218.2.27.1.1.1eriRouterSubsActiveTableERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB
1.3.6.1.4.1.193.218.2.27.1.1.1.1eriRouterSubsActiveEntryERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB
1.3.6.1.4.1.193.218.2.27.1.1.1.1.6eriRouterSubsActiveClearERICSSON-ROUTER-SUBSCRIBER-ACTIVE-MIB