EQLGROUP-MIB

All MIBs › EQLGROUP-MIB

Organization: EqualLogic Inc.

Last Updated: 2014-03-12

Category: Domain: Storage, Vendor: Dell/DNOS, Vendor: EqualLogic/Dell

Description: Dell EqualLogic storage group MIB defining top-level group configuration, access, and administrative account objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EQLGROUP-MIB?

EQLGROUP-MIB is a Dell EqualLogic proprietary MIB for managing an EqualLogic iSCSI storage array group, exposing top-level group configuration, membership, and administrative status objects. It provides data on the storage group's member arrays, storage pool space allocation, and time synchronization, alongside notification definitions for group-level events. It supports monitoring hardware/software status by exposing eqlStorageGroupStatusTotalMembersOnLine (how many array members are currently online), pool space usage and reserved space in use, and snapshot/volume counts, which together reveal capacity pressure or a member array that has dropped out of the group. Administrators often browse EQLGROUP-MIB in a MIB Browser to locate the eqlStorageGroupStatusTable before scripting automated polling. It is a Dell-proprietary MIB with no stated external standards dependency, focused specifically on the EqualLogic PS-series group architecture, and it is deployed in enterprise and SMB data centers running Dell EqualLogic PS-series iSCSI SAN arrays as clustered storage groups.

IPNetwork Monitor allows you to monitor SNMP objects defined in EQLGROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell EqualLogic PS-series iSCSI SAN storage arrays

Monitoring Examples

An administrator polls eqlStorageGroupStatusTable/eqlStorageGroupStatusEntry to check eqlStorageGroupStatusTotalMembersOnLine against the expected member count, immediately revealing if an array member has gone offline. eqlStorageGroupStatusPoolSpace versus eqlStorageGroupStatusPoolSpaceReserved and eqlStorageGroupStatusReservedSpaceInUse shows how much of the storage pool's reserved capacity is consumed, warning of impending capacity exhaustion. eqlStorageGroupStatusSnapshotsInUse and eqlStorageGroupStatusVolumesInUse are tracked to ensure snapshot/volume counts stay within licensed or planned limits, with eqlgroupNotifications firing on group-level fault conditions.

What Can Be Monitored

online group member count
storage pool space usage
reserved space in use
snapshot count in use
volume count in use
group status timestamp

Imported Objects

From EQUALLOGIC-SMI

equalLogic

MODULE-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
RowPointer
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using eqlStorageGroupStatusPoolSpaceUsed OID:

Select a Dell EqualLogic PS-series iSCSI SAN storage array as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type eqlStorageGroupStatusPoolSpaceUsed into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total space, in MB, currently reserved for volume data within this storage pool (not counting snapshots or replication). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if usage approaches the pool's total capacity (e.g. above 85-90%), since running out of pool space can block new volume writes or expansions. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR eqlEULAAcceptInfoAccountName	1.3.6.1.4.1.12740.1.1.32.1.3	DisplayString	read-create	The name of the administration account used to accept the EULA.
eqlEULAAcceptInfoEntry	1.3.6.1.4.1.12740.1.1.32.1		not-accessible	An entry (row) containing EULA acceptance information.
U32 eqlEULAAcceptInfoEULAVersion	1.3.6.1.4.1.12740.1.1.32.1.4	Unsigned32	read-create	The version of the accepted EULA.
INT eqlEULAAcceptInfoFirmwareType	1.3.6.1.4.1.12740.1.1.32.1.1	INTEGER	read-create	The firmware type of the accepted EULA.
ROW eqlEULAAcceptInfoRowStatus	1.3.6.1.4.1.12740.1.1.32.1.2	RowStatus	read-create	This value is used to manage the conceptual row.
eqlEULAAcceptInfoTable	1.3.6.1.4.1.12740.1.1.32		not-accessible	EqualLogic-Persistent EULA acceptance information table. This table contains a single record that stores information associated with the most recent EULA accepted.
U32 eqlEULAAcceptInfoTimestamp	1.3.6.1.4.1.12740.1.1.32.1.5	Unsigned32	read-create	The timestamp when the EULA was accepted..
STR eqlGroupAlertEmailAddress	1.3.6.1.4.1.12740.1.1.9.1.2	DisplayString	read-create	This field specifies the email address of the Adminstrator targeted to recieve the email the email alerts.
I32 eqlGroupAlertEmailIndex	1.3.6.1.4.1.12740.1.1.9.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the email user to alert.
ROW eqlGroupAlertEmailRowStatus	1.3.6.1.4.1.12740.1.1.9.1.3	RowStatus	read-create	row status
INT eqlGroupApplianceDiscovery	1.3.6.1.4.1.12740.1.1.1.1.62	INTEGER	read-write
I32 eqlGroupChapServerIndex	1.3.6.1.4.1.12740.1.1.6.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the CHAP server entry.
IP eqlGroupChapServerInetAddress	1.3.6.1.4.1.12740.1.1.6.1.7	InetAddress	read-create	This field contains the IP address, in network byte order, for the CHAP server.
IPt eqlGroupChapServerInetAddressType	1.3.6.1.4.1.12740.1.1.6.1.6	InetAddressType	read-create	This field contains the IP address type for the CHAP server.
IP eqlGroupChapServerIpAddress	1.3.6.1.4.1.12740.1.1.6.1.2	IpAddress	read-create	This field is deprecated and will be unsupported in the next release.
INT eqlGroupChapServerPort	1.3.6.1.4.1.12740.1.1.6.1.4	INTEGER	read-create	The listening port number of chap server at the specified ipaddress. The default value of zero implies that the authentication request will be forwarded to the default radius port(port number 1812). The value of this object is irrelevant if eqlGroupChapServerInetAddress is the loopback ipaddress.
OCT eqlGroupChapServerRADIUSSecret	1.3.6.1.4.1.12740.1.1.6.1.5	OCTET STRING	read-write	This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.
ROW eqlGroupChapServerRowStatus	1.3.6.1.4.1.12740.1.1.6.1.3	RowStatus	read-create	row status
eqlGroupCompatibilityEntry	1.3.6.1.4.1.12740.1.1.12.1		not-accessible	An entry (row) containing group compatibility information.
eqlGroupCompatibilityTable	1.3.6.1.4.1.12740.1.1.12		not-accessible	EqualLogic-Dynamic Group Compatibility Table
I32 eqlGroupCompressionScanFreq	1.3.6.1.4.1.12740.1.1.1.1.80	Integer32	read-write	This index is the last assigned index value associated with VVol Volumes.
BIT eqlGroupConfigurationFlags	1.3.6.1.4.1.12740.1.1.1.1.46	Bits	read-create	This field defines the common place holder for group wide configuration flag. The flags must be of type enable(1) or disable(0). and the default value will always be disable(0).
eqlgroupConformance	1.3.6.1.4.1.12740.1.3
U32 eqlGroupCurrentCompLevel	1.3.6.1.4.1.12740.1.1.12.1.1	Unsigned32	read-only	This field represents the current compatibility level of the group.
T/F eqlGroupDefaultAliasToVolumeName	1.3.6.1.4.1.12740.1.1.1.1.17	TruthValue	read-write	This field specifies whether or not to default the iSCSI alias to the name of the volume. This can be overriden on a per volume basis. The default is to set the iSCSI alias to the volume name.
U32 eqlGroupDefaultDcbVlanId	1.3.6.1.4.1.12740.1.1.1.1.63	Unsigned32	read-write	Default VLAN ID for DCB control packets on interfaces.
INT eqlGroupDefaultGatewayIpAddress	1.3.6.1.4.1.12740.1.1.1.1.3	INTEGER	read-write	This field is deprecated.
INT eqlGroupDefaultLanguage	1.3.6.1.4.1.12740.1.1.1.1.8	INTEGER	read-write	This field is deprecated.
IP eqlGroupDefaultMask	1.3.6.1.4.1.12740.1.1.1.1.4	IpAddress	read-write	This field is deprecated.
IP eqlGroupDefaultMgmtGatewayIpAddress	1.3.6.1.4.1.12740.1.1.1.1.52	InetAddress	read-write	This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.
IPt eqlGroupDefaultMgmtGatewayIpAddressType	1.3.6.1.4.1.12740.1.1.1.1.51	InetAddressType	read-write	This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.
INT eqlGroupDefaultRoutingProtocol	1.3.6.1.4.1.12740.1.1.1.1.5	INTEGER	read-write	This field is used to indicate the routing protocol use when a group spans multiple subnets. The support protocols are RIP and OFPS. The default value is none.
INT eqlGroupDefaultSectorSize	1.3.6.1.4.1.12740.1.1.1.1.78	INTEGER	read-create	This field specifies, in bytes, the default volume sector size for this group.
STR eqlGroupDefaultSite	1.3.6.1.4.1.12740.1.1.1.1.31	DisplayString	read-write	This field specifies the site where the volume resides. Sites are defined on a per array basis. Sites are used to define where primary and secondary copies of volume mirror reside. The default is the default site. This means that the location of the volume is unrestricted.
INT eqlGroupDefaultSnapshotDeletePolicy	1.3.6.1.4.1.12740.1.1.1.1.11	INTEGER	read-write	This field specifies what should happen when the space reserved for SnapShots is exhuasted. The default is delete-oldest SnapShot.
I32 eqlGroupDefaultSnapshotSize	1.3.6.1.4.1.12740.1.1.1.1.9	Integer32	read-write	This field is used to specify by default what percentage of a volume is reserved for SnapShots. The default is 100%. It can be overriden on a per volume basis. If a volume, testvol, is 100MB, and the GroupDefaultSnapshotsize is 100%, than 100MB will reserved for SnapShots of testvol.
I32 eqlGroupDefaultSnapshotWarningLevel	1.3.6.1.4.1.12740.1.1.1.1.10	Integer32	read-write	This field is used to specify by default when the administrator is warned that the space used for SnapShots close to being exhausted. The default is 20%. It can be overriden on a per volume basis.
U32 eqlGroupDefaultThinMaxGrow	1.3.6.1.4.1.12740.1.1.1.1.50	Unsigned32	read-write	The default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes.
U32 eqlGroupDefaultThinWarn	1.3.6.1.4.1.12740.1.1.1.1.49	Unsigned32	read-write	The default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes.
T/F eqlGroupDefaultVolSnapshotBorrowEnabled	1.3.6.1.4.1.12740.1.1.1.1.71	TruthValue	read-write	This field allows the user a way to change the default behavior of snapshot borrowing on new volume creates across the group.
STR eqlGroupDescription	1.3.6.1.4.1.12740.1.1.1.1.15	UTFString	read-write	This field contains a use supplied description for the group. There is no default.
T/F eqlGroupDiscoveryFilter	1.3.6.1.4.1.12740.1.1.1.1.43	TruthValue	read-write	If set to true, the list of volumes returned during discovery is filtered based on chap configuration in volume ACLs. The default is FALSE.
I32 eqlGroupDiskAddWaitTime	1.3.6.1.4.1.12740.1.1.1.1.7	Integer32	read-write	This field is used to indicated how long to wait in minutes before including newly inserted drives into the RAID set. The delay allows for multiple drives to be inserted before the expansion begins. The default is 2 minutes.
INT eqlGroupDnsServerConfigState	1.3.6.1.4.1.12740.1.1.4.1.6	INTEGER	read-create	This field denotes the transaction state of the eqlStorageGroupDnsServerTable.
I32 eqlGroupDnsServerIndex	1.3.6.1.4.1.12740.1.1.4.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the DNS server entry.
IP eqlGroupDnsServerInetAddress	1.3.6.1.4.1.12740.1.1.4.1.5	InetAddress	read-create	This field contains the IP address, in network byte order, for the DNS server.
IPt eqlGroupDnsServerInetAddressType	1.3.6.1.4.1.12740.1.1.4.1.4	InetAddressType	read-create	This field contains the IP address type for the DNS server.
IP eqlGroupDnsServerIpAddress	1.3.6.1.4.1.12740.1.1.4.1.2	IpAddress	read-create	This field is deprecated and will be unsupported in the next release.
ROW eqlGroupDnsServerRowStatus	1.3.6.1.4.1.12740.1.1.4.1.3	RowStatus	read-create	row status
INT eqlGroupDnsSuffixConfigState	1.3.6.1.4.1.12740.1.1.26.1.4	INTEGER	read-create	This field denotes the transaction state of the eqlStorageGroupDnsSuffixTable.
I32 eqlGroupDnsSuffixIndex	1.3.6.1.4.1.12740.1.1.26.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the DNS suffix entry.
ROW eqlGroupDnsSuffixRowStatus	1.3.6.1.4.1.12740.1.1.26.1.2	RowStatus	read-create	row status
STR eqlGroupDnsSuffixString	1.3.6.1.4.1.12740.1.1.26.1.3	DisplayString	read-create	This field contains a suffix string.
INT eqlGroupEmailPriorityMask	1.3.6.1.4.1.12740.1.1.1.1.28	INTEGER	read-write	This field is used to configure the type of events to be sent in email notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type of event can be specified by adding the correspodning values. Ex: To specify warning,error,fatal the value can be set to 8+16+32 = 56. Setting this field to zero results in sending no events using email notification.
STR eqlGroupEmailSrcDomain	1.3.6.1.4.1.12740.1.1.1.1.18	DisplayString	read-write	This field specifies the SNMP domain name used in the FROM email address in generated email. e.g., everything after @ in foo@equallogic.com .
STR eqlGroupEmailSrcUserName	1.3.6.1.4.1.12740.1.1.1.1.39	DisplayString	read-write	This field specifies user portion of the FROM email address used in generated email. e.g., everything before @ in foo@equallogic.com .
STR eqlGroupEmailSupportContact	1.3.6.1.4.1.12740.1.1.1.1.44	DisplayString	read-create	This field specifies the customer email address for support to contact in the event of a system failure. Configuring this field will enable each member to send an e-mail to this address and customer support in the event of a critical hardware failure.
T/F eqlGroupEnableCLB	1.3.6.1.4.1.12740.1.1.1.1.41	TruthValue	read-write	This field specifies whether or not to turn on Connection Load balancer. The default is TRUE.
T/F eqlGroupEnableCliAccessSSH	1.3.6.1.4.1.12740.1.1.1.1.23	TruthValue	read-write	This field specifies whether or not to allow ssh access to the group. The default is TRUE.
T/F eqlGroupEnableCliAccessUnsecure	1.3.6.1.4.1.12740.1.1.1.1.24	TruthValue	read-write	This field specifies whether or not to allow telnet access to the group. The default is FALSE.
T/F eqlGroupEnableEmailNotifications	1.3.6.1.4.1.12740.1.1.1.1.25	TruthValue	read-write	This field is used to specify whether to notify administrators on alarms via email. The default is FALSE.
T/F eqlGroupEnableFTP	1.3.6.1.4.1.12740.1.1.1.1.38	TruthValue	read-write	This field specifies whether or not to allow ftp access to the group. The default is TRUE.
INT eqlGroupEnableLegacyCryptos	1.3.6.1.4.1.12740.1.1.1.1.65	INTEGER	read-write	This field specifies whether legacy crypto protocols should be enabled or not. This affects what protocols should be supported by applications such as SSH server, HTTPS server, LDAP client, SNMPv3 agent, etc.
T/F eqlGroupEnableSNMPTraps	1.3.6.1.4.1.12740.1.1.1.1.26	TruthValue	read-write	This field is used to specify whether to notify administrators on alarms via SNMP TRAPS. The default is FALSE.
T/F eqlGroupEnableSSH	1.3.6.1.4.1.12740.1.1.1.1.36	TruthValue	read-write	This field is deprecated and will be unsupported in the next release.
T/F eqlGroupEnableSSHProtocolV1	1.3.6.1.4.1.12740.1.1.1.1.59	TruthValue	read-write	This field specifies whether or not the SSH service should support the V1 Protocol. The default is TRUE.
T/F eqlGroupEnableStandbyButton	1.3.6.1.4.1.12740.1.1.1.1.60	TruthValue	read-write	This field specifies if the standby button on the Pirates/Porfidio enclosures will be enabled/disabled. The default is FALSE.
T/F eqlGroupEnableSyslog	1.3.6.1.4.1.12740.1.1.1.1.27	TruthValue	read-write	This field is used to specify whether to notify administrators on alarms via syslog. The default is FALSE.
T/F eqlGroupEnableTelnet	1.3.6.1.4.1.12740.1.1.1.1.37	TruthValue	read-write	This field is deprecated and will be unsupported in the next release.
T/F eqlGroupEnableVolBal	1.3.6.1.4.1.12740.1.1.1.1.42	TruthValue	read-write	This field specifies whether or not to turn on volume balancing. The default is TRUE.
T/F eqlGroupEnableVolumeRecovery	1.3.6.1.4.1.12740.1.1.1.1.67	TruthValue	read-write	This field specifies whether or not the recoverable volume feature is enabled. The default value is enabled.
T/F eqlGroupEnableWebAccessSSL	1.3.6.1.4.1.12740.1.1.1.1.21	TruthValue	read-write	This field specifies whether or not to allow web access to the group using https. The default is TRUE.
T/F eqlGroupEnableWebAccessUnsecure	1.3.6.1.4.1.12740.1.1.1.1.22	TruthValue	read-write	This field specifies whether or not to allow web access to the group using http. The default is TRUE.
I32 eqlGroupId	1.3.6.1.4.1.12740.1.1.1.1.1	Integer32	not-accessible	This index uniquely identifies the group. This index should always be 1.
IP eqlGroupInet6Addr	1.3.6.1.4.1.12740.1.1.1.1.54	InetAddress	read-write	This field specifies the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group. There is no default value for this field.
IPt eqlGroupInet6AddrType	1.3.6.1.4.1.12740.1.1.1.1.53	InetAddressType	read-write	This field specifies the type of the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group.
IP eqlGroupInetAddr	1.3.6.1.4.1.12740.1.1.1.1.56	InetAddress	read-write	This field specifies the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group. There is no default value for this field.
IPt eqlGroupInetAddrType	1.3.6.1.4.1.12740.1.1.1.1.55	InetAddressType	read-write	This field specifies the type of the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group.
IP eqlGroupIpAddr	1.3.6.1.4.1.12740.1.1.1.1.20	IpAddress	read-write	This field is deprecated and will be unsupported in the next release.
STR eqlGroupIscsiNamePrefix	1.3.6.1.4.1.12740.1.1.1.1.16	DisplayString	read-write	This field specifies the prefix for the iSCSI target names. The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis. However the name must conform to the iSCSI Specification.
INT eqlGroupISCSIPortalGrpTag	1.3.6.1.4.1.12740.1.1.1.1.47	INTEGER	read-only	A flag used internally by the iSCSI subsystem to determine the upgrade history of this storage group and infer the default iSCSI Target Portal Group ID. This value is changed internally by the group management daemon as members are added or upgraded such that the value is non zero if any group member has been previously configured with firmware prior to 2.3.6
I32 eqlGroupiSNSServerIndex	1.3.6.1.4.1.12740.1.1.11.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the iSNS server entry.
IP eqlGroupiSNSServerInetAddress	1.3.6.1.4.1.12740.1.1.11.1.6	InetAddress	read-create	This field contains the IP address, in network byte order, for the iSNS server.
IPt eqlGroupiSNSServerInetAddressType	1.3.6.1.4.1.12740.1.1.11.1.5	InetAddressType	read-create	This field contains the IP address type for the iSNS server.
IP eqlGroupiSNSServerIpAddress	1.3.6.1.4.1.12740.1.1.11.1.3	IpAddress	read-create	This field is deprecated and will be unsupported in the next release.
INT eqlGroupiSNSServerPort	1.3.6.1.4.1.12740.1.1.11.1.4	INTEGER	read-write	Indicates the port the iSNS server is accepting iSNSP messages on, generally the iSNS well known port.The well known port for iSNSP is 3205. The default value implies to use well known port.
ROW eqlGroupiSNSServerRowStatus	1.3.6.1.4.1.12740.1.1.11.1.2	RowStatus	read-create	Used to manage conceptual row.
INT eqlGroupIsSingleSubnet	1.3.6.1.4.1.12740.1.1.1.1.2	INTEGER	read-write	This field is used to indicate whether or not all the arrays within a group are located in the same subset. The default is single-subnet.
INT eqlGroupIsStorageOptimization	1.3.6.1.4.1.12740.1.1.1.1.6	INTEGER	read-write	This field is used to indicate whether the Storage Pool is optimized for capacity (RAID 5/50) or performance (RAID 10). The default is capacity.
T/F eqlGroupLDAPLoginAuthEnable	1.3.6.1.4.1.12740.1.1.1.1.61	TruthValue	read-write	This field enables LDAP login authentication.
I32 eqlGroupLogLevel	1.3.6.1.4.1.12740.1.1.1.1.14	Integer32	read-write	This field specifies the loglevel for the group. The log level determines which messages are written to the console. The following levels are supported. The value of this object will be an OR of the values associated with each level. LEVEL VALUE ------- ------- INFO 0x04 WARNING 0x08 ERROR 0x10 FATAL 0x20 DIAG 0x40 AUDIT 0x80 Default value is INFO\|WARNING\|ERROR\|FATAL = 0x04\|0x08\|0x10\|0x20\| = 0x3c = 60
I32 eqlGroupMaxConcurrentReplicas	1.3.6.1.4.1.12740.1.1.1.1.48	Integer32	read-write	This field specifies the maximum number of replications that are transferring data at one time. The minimum value is 1, the maximum value is 16, and the default value is 16.
I32 eqlGroupMaxReplSegments	1.3.6.1.4.1.12740.1.1.1.1.66	Integer32	read-write	This field specifies the maximum number of replica segments of 256K size per volume that are transferring data at one time. The minimum value is 1, the maximum value is 60, and the default value is 60.
eqlgroupModule	1.3.6.1.4.1.12740.1			Equallogic Inc. group information Copyright (c) 2002-2013 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell Inc. This software embodies proprietary information and trade secrets of Dell Inc.
U32 eqlGroupMonitorReminderTimestamp	1.3.6.1.4.1.12740.1.1.1.1.82	Unsigned32	read-write	UTC timestamp when to display the monitoring connection reminder. 0 to display immediately. 0x7fffffff to never display.
STR eqlGroupName	1.3.6.1.4.1.12740.1.1.1.1.19	DisplayString	read-write	This field specifies the Well Known Name for the group. It must be a name which is resolvable by DNS. There is no default for Group Name.
eqlgroupNotifications	1.3.6.1.4.1.12740.1.2
I32 eqlGroupNtpServerIndex	1.3.6.1.4.1.12740.1.1.5.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the NTP server entry.
IP eqlGroupNtpServerInetAddress	1.3.6.1.4.1.12740.1.1.5.1.6	InetAddress	read-create	This field contains the IP address, in network byte order, for the NTP server.
IPt eqlGroupNtpServerInetAddressType	1.3.6.1.4.1.12740.1.1.5.1.5	InetAddressType	read-create	This field contains the IP address type for the NTP server.
IP eqlGroupNtpServerIpAddress	1.3.6.1.4.1.12740.1.1.5.1.2	IpAddress	read-create	This field is deprecated and will be unsupported in the next release.
INT eqlGroupNtpServerPort	1.3.6.1.4.1.12740.1.1.5.1.4	INTEGER	read-write	The listening port number of the ntp server.Default value implies well known ntp port number ( 123 ) assigned by the IANA.
ROW eqlGroupNtpServerRowStatus	1.3.6.1.4.1.12740.1.1.5.1.3	RowStatus	read-create	row status
INT eqlGroupObjectReuseScrub	1.3.6.1.4.1.12740.1.1.1.1.35	INTEGER	read-only	If enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents of the object. This field is deprecated and is unsupported from 7.0.
eqlgroupObjects	1.3.6.1.4.1.12740.1.1
OCT eqlGroupPasswd1	1.3.6.1.4.1.12740.1.1.1.1.32	OCTET STRING	read-create	An octet string containing the password to authenticate members joining the group. If written, it changes the password for the account. If read, it returns a zero-length string.
STR eqlGroupPasswd2	1.3.6.1.4.1.12740.1.1.1.1.33	DisplayString	not-accessible	This field is deprecated.
U32 eqlGroupProfileIndex	1.3.6.1.4.1.12740.1.1.1.1.58	Unsigned32	read-only	This field represents the profile identifier.
I32 eqlGroupRecoveryLifeTime	1.3.6.1.4.1.12740.1.1.1.1.73	Integer32	read-write	This field defines the amount of time (in seconds) that a deleted volume can remain in the recovery bin before being permanently deleted by the system. The default value (0) is one week.
T/F eqlGroupRecoveryLifeTimeEnable	1.3.6.1.4.1.12740.1.1.1.1.72	TruthValue	read-write	This field enables or disables the lifetime that a deleted volume can remain in the recovery bin. When enabled, a volume will be permanently deleted after the recovery lifetime in the recovery bin.
I32 eqlGroupRecoveryTrimmerFreq	1.3.6.1.4.1.12740.1.1.1.1.75	Integer32	read-write	This field defines the frequency (in seconds) that the system will scan for volumes that have been in the recovery bin past their lifetime. The default value is one scan every 24 hours.
U32 eqlGroupReplicationWindowSize	1.3.6.1.4.1.12740.1.1.1.1.45	Unsigned32	read-create	This field specifies the receiving window size of the tcp connection established to secondary site during replication data transfer. Minimum value is 72KB.Maximum value is 2048KB.
ROW eqlGroupRowStatus	1.3.6.1.4.1.12740.1.1.1.1.34	RowStatus	read-write	Rowstatus
INT eqlGroupRunCompressionScan	1.3.6.1.4.1.12740.1.1.1.1.81	INTEGER	read-write	Enable/Disable the snapshot compression scanner.
INT eqlGroupSessionBannerEnable	1.3.6.1.4.1.12740.1.1.1.1.70	INTEGER	read-write	Enable/disable the session banner feature. The default is disabled.
eqlGroupSessionBannerEntry	1.3.6.1.4.1.12740.1.1.28.1		not-accessible	An entry (row) containing session banner information.
ROW eqlGroupSessionBannerRowStatus	1.3.6.1.4.1.12740.1.1.28.1.1	RowStatus	read-create	Rowstatus
eqlGroupSessionBannerTable	1.3.6.1.4.1.12740.1.1.28		not-accessible	EqualLogic-Persistent Storage Group Session Banner Table
OCT eqlGroupSessionBannerText	1.3.6.1.4.1.12740.1.1.28.1.2	OCTET STRING	read-create	Up to 1000 bytes of UTF-8 string to display at the beginning of any session
I32 eqlGroupSessionIdleTimeout	1.3.6.1.4.1.12740.1.1.1.1.68	Integer32	read-write	This is the number of minutes a session may remain idle before being logged out for inactivty. The maximum timeout value is 24 hours or 1440 minutes. The minimum value is 1 minute. The default value is 30 minutes.
INT eqlGroupSessionIdleTimeoutEnable	1.3.6.1.4.1.12740.1.1.1.1.69	INTEGER	read-write	Enable/disable the idle session timeout feature. The default is disabled.
OCT eqlGroupSingleSignOnKrbRealm	1.3.6.1.4.1.12740.1.1.29.1.3	OCTET STRING	read-only	This field contains kerberos relam or the domain name expressed using a dot notation. This field should match the dc part of the BASE DN in the eqlLDAPServerTable.
STR eqlGroupSingleSignOnRegGroupName	1.3.6.1.4.1.12740.1.1.29.1.2	DisplayString	read-only	This field specifies the group name that was registered with the AD server
INT eqlGroupSingleSignOnStatus	1.3.6.1.4.1.12740.1.1.29.1.1	INTEGER	read-only	This field specifies the local status for signle sign on as maintained by the PS group It will be set to Ready if an attempt to join the AD server had succeeded with the current group name and current AD domain (as set setup in eqlLDAPServerTable)
eqlGroupSingleSignOnStatusEntry	1.3.6.1.4.1.12740.1.1.29.1		not-accessible	An entry (row) containing session Single Sign on status information.
eqlGroupSingleSignOnStatusTable	1.3.6.1.4.1.12740.1.1.29		not-accessible	EqualLogic-Dynamic Single Sign on status table
STR eqlGroupSiteContactEmail	1.3.6.1.4.1.12740.1.1.3.1.4	DisplayString	read-create	This field specifies the email address of the Administrators responsible for this site.
STR eqlGroupSiteContactMobile	1.3.6.1.4.1.12740.1.1.3.1.6	DisplayString	read-create	This field specifies the cell phone number of the Administrator responsible for this site.
STR eqlGroupSiteContactPhone	1.3.6.1.4.1.12740.1.1.3.1.5	DisplayString	read-create	This field specifies the phone number of the Administrator responsible for this site.
STR eqlGroupSiteDescription	1.3.6.1.4.1.12740.1.1.3.1.3	UTFString	read-create	This field contains a description of the site. For example the phsyical address of the site. There is no default.
I32 eqlGroupSiteIndex	1.3.6.1.4.1.12740.1.1.3.1.1	Integer32	not-accessible	This field specifies the unique index used to identify a site.
STR eqlGroupSiteName	1.3.6.1.4.1.12740.1.1.3.1.2	UTFString	read-create	This field specifies the name of the site default site for the group.
ROW eqlGroupSiteRowStatus	1.3.6.1.4.1.12740.1.1.3.1.7	RowStatus	read-create	Row status
I32 eqlGroupSMTPServerIndex	1.3.6.1.4.1.12740.1.1.7.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the SMTP server entry.
IP eqlGroupSMTPServerInetAddress	1.3.6.1.4.1.12740.1.1.7.1.6	InetAddress	read-create	This field contains the IP address, in network byte order, for the SMTP server.
IPt eqlGroupSMTPServerInetAddressType	1.3.6.1.4.1.12740.1.1.7.1.5	InetAddressType	read-create	This field contains the IP address type for the SMTP server.
IP eqlGroupSMTPServerIpAddress	1.3.6.1.4.1.12740.1.1.7.1.2	IpAddress	read-create	This field is deprecated and will be unsupported in the next release.
INT eqlGroupSMTPServerPort	1.3.6.1.4.1.12740.1.1.7.1.4	INTEGER	read-create	The listening port number of the SMTP server. The default value of zero implies that the server is listening on wellknown port number ( 25 ) for SMTP asssigned by the IANA.
ROW eqlGroupSMTPServerRowStatus	1.3.6.1.4.1.12740.1.1.7.1.3	RowStatus	read-create	row status
INT eqlGroupSNMPPriorityMask	1.3.6.1.4.1.12740.1.1.1.1.29	INTEGER	read-write	This field is currently not being used.
INT eqlGroupSupportSlowSwitch	1.3.6.1.4.1.12740.1.1.1.1.57	INTEGER	read-write	This field is used to indicate the slow switch support for the group.
INT eqlGroupSyslogFacility	1.3.6.1.4.1.12740.1.1.1.1.40	INTEGER	read-write	This field specifies the facility code which you would like applied to all eqllog messages that are targeted at syslog.
INT eqlGroupSysLogPriorityMask	1.3.6.1.4.1.12740.1.1.1.1.30	INTEGER	read-write	This field is used to configure the type of events to be sent in syslog notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type of event can be specified by adding the correspodning values. Ex: To specify warning,error,fatal the value can be set to 8+16+32 = 56. Setting this field to zero results in sending no events using syslog notification.
I32 eqlGroupSysLogServerIndex	1.3.6.1.4.1.12740.1.1.8.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the syslog server entry.
IP eqlGroupSysLogServerInetAddress	1.3.6.1.4.1.12740.1.1.8.1.5	InetAddress	read-create	This field contains the IP address, in network byte order, for the syslog server.
IPt eqlGroupSysLogServerInetAddressType	1.3.6.1.4.1.12740.1.1.8.1.4	InetAddressType	read-create	This field contains the IP address type for the syslog server.
IP eqlGroupSysLogServerIpAddress	1.3.6.1.4.1.12740.1.1.8.1.2	IpAddress	read-create	This field is deprecated and will be unsupported in the next release.
ROW eqlGroupSysLogServerRowStatus	1.3.6.1.4.1.12740.1.1.8.1.3	RowStatus	read-create	row status
NUM eqlGroupTaskContext	1.3.6.1.4.1.12740.1.1.18.1.4	RowPointer	read-create	Context associated with the task. For ex: a volume or replicaset.
eqlGroupTaskEntry	1.3.6.1.4.1.12740.1.1.18.1		not-accessible	A row in the table represents a task. Any given task will have multiple sub tasks. Each sub task involves executing a management operation. The system will execute each sub task one after another until the task is completed.
U32 eqlGroupTaskIndex	1.3.6.1.4.1.12740.1.1.18.1.1	Unsigned32	not-accessible	This field specifies an index that uniquely identifies a task.
U32 eqlGroupTaskNumSubTasks	1.3.6.1.4.1.12740.1.1.18.1.5	Unsigned32	read-create	Number of subtasks in this task.
INT eqlGroupTaskReplication	1.3.6.1.4.1.12740.1.1.18.1.11	INTEGER	read-create	If set to true, a manual replica will be created when performing replication.
ROW eqlGroupTaskRowStatus	1.3.6.1.4.1.12740.1.1.18.1.2	RowStatus	read-create	This field is used to manage the conceptual row.
C32 eqlGroupTaskStartTime	1.3.6.1.4.1.12740.1.1.18.1.10	Counter32	read-create	time at which this task started represented as number of seconds since epoch.
INT eqlGroupTaskStatus	1.3.6.1.4.1.12740.1.1.18.1.8	INTEGER	read-create	set to true if user action is required for the task to proceed further.
INT eqlGroupTaskSubTaskInProgress	1.3.6.1.4.1.12740.1.1.18.1.6	INTEGER	read-create	Subtask that is currently in progress for this task.
U32 eqlGroupTaskSubtaskStatus	1.3.6.1.4.1.12740.1.1.18.1.7	Unsigned32	read-create	Status of currently executing subtask.
eqlGroupTaskTable	1.3.6.1.4.1.12740.1.1.18		not-accessible	EqualLogic-Persistent task table. A row in this table represents a task currently executing in the group.
INT eqlGroupTaskType	1.3.6.1.4.1.12740.1.1.18.1.3	INTEGER	read-create	This field represents the type of the task.
INT eqlGroupTaskUserAction	1.3.6.1.4.1.12740.1.1.18.1.9	INTEGER	read-create	user action on the task.
INT eqlGroupThermalShutdownOverride	1.3.6.1.4.1.12740.1.1.1.1.64	INTEGER	read-write	This field specifies whether thermal shutdownn override is enabled or disabled.
INT eqlGroupTimeProtocol	1.3.6.1.4.1.12740.1.1.1.1.74	INTEGER	read-write	This field specifies the active network time protocol. The value may be ntp(0) or sntp(1) with a default value of ntp(0).
INT eqlGroupTimeZone	1.3.6.1.4.1.12740.1.1.1.1.13	INTEGER	read-write	The field specifies the default timezone for the group HST (GMT-10:00) Hawaiian Standard Time: Pacific/Honolulu, AST (GMT-09:00) Alaskan Standard Time: America/Anchorage, PST (GMT-08:00) Pacific Standard Time: America/Los_Angeles, PNT (GMT-07:00) America/Phoenix, MST (GMT-07:00) US Mountain Standard Time: America/Denver, CST (GMT-06:00) Central Standard Time: America/Chicago, EST (GMT-05:00) Eastern Standard Time: America/New_York, IET (GMT-05:00) America/Indiana/Indianapolis, PRT (GMT-04:00) Atlantic Standard Time: America/Halifax, GMT (GMT-00:00) Greenwich Mean Time: GMT, ECT (GMT+01:00) Romance Standard Time: Europe/Paris, EET (GMT+02:00) Egypt Standard Time: Africa/Cairo, EAT (GMT+03:00) Saudi Arabia Standard Time: Asia/Riyadh, MET (GMT+03:30) Iran Standard Time: Asia/Tehran, NET (GMT+04:00) Arabian Standard Time: Asia/Yerevan, PLT (GMT+05:00) West Asia Standard Time: Asia/Karachi, IST (GMT+05:30) India Standard Time: Asia/Calcutta, BST (GMT+06:00) Central Asia Standard Time: Asia/Dacca, VST (GMT+07:00) Bangkok Standard Time: Asia/Bangkok, CTT (GMT+08:00) China Standard Time: Asia/Shanghai, JST (GMT+09:00) Tokyo Standard Time: Asia/Tokyo, ACT (GMT+09:30) Cen. Australia Standard Time: Australia/Darwin, AET (GMT+10:00) Sydney Standard Time: Australia/Sydney, SST (GMT+11:00) Central Pacific Standard Time: Pacific/Guadalcanal, NST (GMT+12:00) New Zealand Standard Time: Pacific/Fiji, MIT (GMT+13:00) Samoa Standard Time: Pacific/Apia, CNT (GMT-03:30) Newfoundland Standard Time: America/St_Johns, AGT (GMT-03:00) SA Eastern Standard Time: America/Buenos_Aires, BET (GMT-03:00) E South America Standard Time: America/Sao_Paulo, CAT (GMT-01:00) Azores Standard Time: Atlantic/Cape_Verde, Europe/Andorra, Asia/Dubai, Asia/Kabul, America/Antigua, America/Anguilla, Europe/Tirane, Asia/Yerevan, America/Curacao, Africa/Luanda, Antarctica/McMurdo, Antarctica/South_Pole, Antarctica/Rothera, Antarctica/Palmer, Antarctica/Mawson, Antarctica/Davis, Antarctica/Casey, Antarctica/Vostok, Antarctica/DumontDUrville, Antarctica/Syowa, America/Argentina/Buenos_Aires, America/Argentina/Cordoba, America/Argentina/Jujuy, America/Argentina/Tucuman, America/Argentina/Catamarca, America/Argentina/La_Rioja, America/Argentina/San_Juan, America/Argentina/Mendoza, America/Argentina/Rio_Gallegos, America/Argentina/Ushuaia, Pacific/Pago_Pago, Europe/Vienna, Australia/Lord_Howe, Australia/Hobart, Australia/Currie, Australia/Melbourne, Australia/Sydney, Australia/Broken_Hill, Australia/Brisbane, Australia/Lindeman, Australia/Adelaide, Australia/Darwin, Australia/Perth, America/Aruba, Europe/Mariehamn, Asia/Baku, Europe/Sarajevo, America/Barbados, Asia/Dhaka, Europe/Brussels, Africa/Ouagadougou, Europe/Sofia, Asia/Bahrain, Africa/Bujumbura, Africa/Porto-Novo, Atlantic/Bermuda, Asia/Brunei, America/La_Paz, America/Noronha, America/Belem, America/Fortaleza, America/Recife, America/Araguaina, America/Maceio, America/Bahia, America/Sao_Paulo, America/Campo_Grande, America/Cuiaba, America/Porto_Velho, America/Boa_Vista, America/Manaus, America/Eirunepe, America/Rio_Branco, America/Nassau, Asia/Thimphu, Africa/Gaborone, Europe/Minsk, America/Belize, America/St_Johns, America/Halifax, America/Glace_Bay, America/Moncton, America/Goose_Bay, America/Blanc-Sablon, America/Montreal, America/Toronto, America/Nipigon, America/Thunder_Bay, America/Pangnirtung, America/Iqaluit, America/Atikokan, America/Rankin_Inlet, America/Winnipeg, America/Rainy_River, America/Cambridge_Bay, America/Regina, America/Swift_Current, America/Edmonton, America/Yellowknife, America/Inuvik, America/Dawson_Creek, America/Vancouver, America/Whitehorse, America/Dawson, Indian/Cocos, Africa/Kinshasa, Africa/Lubumbashi, Africa/Bangui, Africa/Brazzaville, Europe/Zurich, Africa/Abidjan, Pacific/Rarotonga, America/Santiago, Pacific/Easter, Africa/Douala, Asia/Shanghai, Asia/Harbin, Asia/Chongqing, Asia/Urumqi, Asia/Kashgar, America/Bogota, America/Costa_Rica, America/Havana, Atlantic/Cape_Verde, Indian/Christmas, Asia/Nicosia, Europe/Prague, Europe/Berlin, Africa/Djibouti, Europe/Copenhagen, America/Dominica, America/Santo_Domingo, Africa/Algiers, America/Guayaquil, Pacific/Galapagos, Europe/Tallinn, Africa/Cairo, Africa/El_Aaiun, Africa/Asmara, Europe/Madrid, Africa/Ceuta, Atlantic/Canary, Africa/Addis_Ababa, Europe/Helsinki, Pacific/Fiji, Atlantic/Stanley, Pacific/Truk, Pacific/Ponape, Pacific/Kosrae, Atlantic/Faroe, Europe/Paris, Africa/Libreville, Europe/London, America/Grenada, Asia/Tbilisi, America/Cayenne, Europe/Guernsey, Africa/Accra, Europe/Gibraltar, America/Godthab, America/Danmarkshavn, America/Scoresbysund, America/Thule, Africa/Banjul, Africa/Conakry, America/Guadeloupe, Africa/Malabo, Europe/Athens, Atlantic/South_Georgia, America/Guatemala, Pacific/Guam, Africa/Bissau, America/Guyana, Asia/Hong_Kong, America/Tegucigalpa, Europe/Zagreb, America/Port-au-Prince, Europe/Budapest, Asia/Jakarta, Asia/Pontianak, Asia/Makassar, Asia/Jayapura, Europe/Dublin, Asia/Jerusalem, Europe/Isle_of_Man, Asia/Calcutta, Indian/Chagos, Asia/Baghdad, Asia/Tehran, Atlantic/Reykjavik, Europe/Rome, Europe/Jersey, America/Jamaica, Asia/Amman, Asia/Tokyo, Africa/Nairobi, Asia/Bishkek, Asia/Phnom_Penh, Pacific/Tarawa, Pacific/Enderbury, Pacific/Kiritimati, Indian/Comoro, America/St_Kitts, Asia/Pyongyang, Asia/Seoul, Asia/Kuwait, America/Cayman, Asia/Almaty, Asia/Qyzylorda, Asia/Aqtobe, Asia/Aqtau, Asia/Oral, Asia/Vientiane, Asia/Beirut, America/St_Lucia, Europe/Vaduz, Asia/Colombo, Africa/Monrovia, Africa/Maseru, Europe/Vilnius, Europe/Luxembourg, Europe/Riga, Africa/Tripoli, Africa/Casablanca, Europe/Monaco, Europe/Chisinau, Europe/Podgorica, Indian/Antananarivo, Pacific/Majuro, Pacific/Kwajalein, Europe/Skopje, Africa/Bamako, Asia/Rangoon, Asia/Ulaanbaatar, Asia/Hovd, Asia/Choibalsan, Asia/Macau, Pacific/Saipan, America/Martinique, Africa/Nouakchott, America/Montserrat, Europe/Malta, Indian/Mauritius, Indian/Maldives, Africa/Blantyre, America/Mexico_City, America/Cancun, America/Merida, America/Monterrey, America/Mazatlan, America/Chihuahua, America/Hermosillo, America/Tijuana, Asia/Kuala_Lumpur, Asia/Kuching, Africa/Maputo, Africa/Windhoek, Pacific/Noumea, Africa/Niamey, Pacific/Norfolk, Africa/Lagos, America/Managua, Europe/Amsterdam, Europe/Oslo, Asia/Katmandu, Pacific/Nauru, Pacific/Niue, Pacific/Auckland, Pacific/Chatham, Asia/Muscat, America/Panama, America/Lima, Pacific/Tahiti, Pacific/Marquesas, Pacific/Gambier, Pacific/Port_Moresby, Asia/Manila, Asia/Karachi, Europe/Warsaw, America/Miquelon, Pacific/Pitcairn, America/Puerto_Rico, Asia/Gaza, Europe/Lisbon, Atlantic/Madeira, Atlantic/Azores, Pacific/Palau, America/Asuncion, Asia/Qatar, Indian/Reunion, Europe/Bucharest, Europe/Belgrade, Europe/Kaliningrad, Europe/Moscow, Europe/Volgograd, Europe/Samara, Asia/Yekaterinburg, Asia/Omsk, Asia/Novosibirsk, Asia/Krasnoyarsk, Asia/Irkutsk, Asia/Yakutsk, Asia/Vladivostok, Asia/Sakhalin, Asia/Magadan, Asia/Kamchatka, Asia/Anadyr, Africa/Kigali, Asia/Riyadh, Pacific/Guadalcanal, Indian/Mahe, Africa/Khartoum, Europe/Stockholm, Asia/Singapore, Atlantic/St_Helena, Europe/Ljubljana, Arctic/Longyearbyen, Atlantic/Jan_Mayen, Europe/Bratislava, Africa/Freetown, Europe/San_Marino, Africa/Dakar, Africa/Mogadishu, America/Paramaribo, Africa/Sao_Tome, America/El_Salvador, Asia/Damascus, Africa/Mbabane, America/Grand_Turk, Africa/Ndjamena, Indian/Kerguelen, Africa/Lome, Asia/Bangkok, Asia/Dushanbe, Pacific/Fakaofo, Asia/Dili, Asia/Ashgabat, Africa/Tunis, Pacific/Tongatapu, Europe/Istanbul, America/Port_of_Spain, Pacific/Funafuti, Asia/Taipei, Africa/Dar_es_Salaam, Europe/Kiev, Europe/Uzhgorod, Europe/Zaporozhye, Europe/Simferopol, Africa/Kampala, Pacific/Johnston, Pacific/Midway, Pacific/Wake, America/New_York, America/Detroit, America/Kentucky/Louisville, America/Kentucky/Monticello, America/Indiana/Indianapolis, America/Indiana/Marengo, America/Indiana/Knox, America/Indiana/Vevay, America/Chicago, America/Indiana/Vincennes, America/Indiana/Petersburg, America/Menominee, America/North_Dakota/Center, America/North_Dakota/New_Salem, America/Denver, America/Boise, America/Shiprock, America/Phoenix, America/Los_Angeles, America/Anchorage, America/Juneau, America/Yakutat, America/Nome, America/Adak, Pacific/Honolulu, America/Montevideo, Asia/Samarkand, Asia/Tashkent, Europe/Vatican, America/St_Vincent, America/Caracas, America/Tortola, America/St_Thomas, Asia/Saigon, Pacific/Efate, Pacific/Wallis, Pacific/Apia, Asia/Aden, Indian/Mayotte, Africa/Johannesburg, Africa/Lusaka, Africa/Harare, Australia/Eucla, America/Indiana/Tell_City, America/Indiana/Winamac, America/Resolute, America/Marigot, Asia/Kolkata, Asia/Ho_Chi_Minh, America/St_Barthelemy, America/Argentina/San_Luis, America/Santarem, America/Argentina/Salta, Asia/Kathmandu, America/Ojinaga, America/Santa_Isabel, Asia/Novokuznetsk, America/Matamoros, Antarctica/Macquarie, America/Bahia_Banderas, Pacific/Pohnpei, Pacific/Chuuk, America/North_Dakota/Beulah, America/Metlakatla, America/Sitka, America/Kralendijk, America/Lower_Princes, Africa/Juba, Asia/Hebron, Europe/Tiraspol, America/Creston, Asia/Khandyga, Europe/Busingen, Asia/Ust-Nera
INT eqlGroupUpdateEnable	1.3.6.1.4.1.12740.1.1.1.1.76	INTEGER	read-write	Enable/disable update available checking.
U32 eqlGroupUpdateLast	1.3.6.1.4.1.12740.1.1.1.1.77	Unsigned32	read-write	The time of last update performed represented as the number of seconds since the epoch.
U32 eqlGrpNoofOrphanSnapCollections	1.3.6.1.4.1.12740.1.1.13.1.3	Unsigned32	read-only	This field specifies the total number of snapshot collections in the group that dont have a corresponding volume set ie number of rows in eqliscsiSnapCollectionTable with eqliscsiSnapCollectionVolIndex set to zero.
U32 eqlGrpNoofSnapCollections	1.3.6.1.4.1.12740.1.1.13.1.2	Unsigned32	read-only	This field specifies the total number of snapshot collections in the group ie number of rows in eqliscsiSnapCollectionTable.
U32 eqlGrpNoofVolCollections	1.3.6.1.4.1.12740.1.1.13.1.1	Unsigned32	read-only	This field specifies the total number of volume collections in the group ie number of rows in eqliscsiVolCollectionTable.
ADM eqlLdapLoginAccessAccountPrivilege	1.3.6.1.4.1.12740.1.1.25.1.3	AdminAccountPrivilegeType	read-create	This field specifies the privilege level of the account that logs in through this LDAP object access. The default is global-admin. Global-admin grants full access to the administrator. Pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. Volume-admin designates the administrator to have access to specific volumes within specific storage pools
ADM eqlLdapLoginAccessAccountType	1.3.6.1.4.1.12740.1.1.25.1.4	AdminAccountType	read-create	This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected. Read-only account is only applicable for group admin accounts/pool-admin accounts. Group-admins with read-only set cannot modify any settings.
STR eqlLdapLoginAccessAdDomainName	1.3.6.1.4.1.12740.1.1.25.1.6	DisplayString	read-create	The name of the AD Domain associated with this LDAP object. Length allows for terminating null terminating character.
eqlLdapLoginAccessEntry	1.3.6.1.4.1.12740.1.1.25.1		not-accessible	An entry (row) containing the configuration for the LDAP object access details.
STR eqlLdapLoginAccessName	1.3.6.1.4.1.12740.1.1.25.1.1	DisplayString	read-create	The name of the LDAP object access description. For AD groups, it is the same as cn attribute of the AD group. For LDAP accounts, it is the same as the account name. Length allows for terminating null terminating character.
ROW eqlLdapLoginAccessRowStatus	1.3.6.1.4.1.12740.1.1.25.1.5	RowStatus	read-create	This field indicates the status of this entry.
eqlLdapLoginAccessTable	1.3.6.1.4.1.12740.1.1.25		not-accessible	EqualLogic-Persistent Group Active directory group table. Stores the access that an AD group or account receives when logging in through an entry in this table.
INT eqlLdapLoginAccessType	1.3.6.1.4.1.12740.1.1.25.1.2	INTEGER	read-create	This field represents the type of LDAP object that this entry grants access to.
T/F eqlLDAPServerAnonymousAccess	1.3.6.1.4.1.12740.1.1.24.1.7	TruthValue	read-create	This field specifies whether an anonymous bind can be done, in which case the bind DN and the bind password are not needed. The default is no anonymous access.
OCT eqlLDAPServerBaseDN	1.3.6.1.4.1.12740.1.1.24.1.2	OCTET STRING	read-create	This field contains the LDAP server BASE DN used for ldapsearch queries.
OCT eqlLDAPServerBindDN	1.3.6.1.4.1.12740.1.1.24.1.8	OCTET STRING	read-create	This field contains the LDAP bind DN (username) for this client. It can be set but it returns a zero-length string upon read.
OCT eqlLDAPServerBindPassword	1.3.6.1.4.1.12740.1.1.24.1.9	OCTET STRING	read-create	This field contains the LDAP bind password for this client. It can be set but it returns a zero-length string upon read.
eqlLDAPServerEntry	1.3.6.1.4.1.12740.1.1.24.1		not-accessible	An entry (row) containing the configuration for a LDAP server.
I32 eqlLDAPServerIndex	1.3.6.1.4.1.12740.1.1.24.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the LDAP server entry.
IP eqlLDAPServerInetAddress	1.3.6.1.4.1.12740.1.1.24.1.5	InetAddress	read-create	This field contains the IP address, in network byte order, for the LDAP Accounting server.
IPt eqlLDAPServerInetAddressType	1.3.6.1.4.1.12740.1.1.24.1.4	InetAddressType	read-create	This field contains the IP address type for the LDAP Accounting server.
INT eqlLDAPServerPort	1.3.6.1.4.1.12740.1.1.24.1.6	INTEGER	read-create	The listening port number of the LDAP Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default LDAP Accounting port (389).
ROW eqlLDAPServerRowStatus	1.3.6.1.4.1.12740.1.1.24.1.10	RowStatus	read-create	row status
INT eqlLDAPServerSecureProtocol	1.3.6.1.4.1.12740.1.1.24.1.3	INTEGER	read-create	This field represent the security protocol between PS Group and the LDAP server. Default value is none meaning that the user credentials will be sent over the network in plain text.
eqlLDAPServerTable	1.3.6.1.4.1.12740.1.1.24		not-accessible	EqualLogic-Persistent Group LDAP Accounting server table.
T/F eqlLocaliscsiAuthEnable	1.3.6.1.4.1.12740.1.1.14.1.9	TruthValue	read-write	This field enables Local authentication for ISCSI initiators.
eqlNextAvailableIndexEntry	1.3.6.1.4.1.12740.1.1.30.1		not-accessible	An entry (row) which tracks an available index for the specified table type.
eqlNextAvailableIndexTable	1.3.6.1.4.1.12740.1.1.30		not-accessible	EqualLogic-Dynamic Next Available Index Table This table tracks the next available index for a specified table type.
U32 eqlNextAvailableIndexTableType	1.3.6.1.4.1.12740.1.1.30.1.1	Unsigned32	not-accessible	This field indicates the table for which this index is maintained (from tableTypes.h).
U32 eqlNextAvailableIndexValue	1.3.6.1.4.1.12740.1.1.30.1.2	Unsigned32	read-only	This field maintains the last db index value used for the specified table.
U32 eqlRADIUSAcctMaxRetries	1.3.6.1.4.1.12740.1.1.14.1.7	Unsigned32	read-write	This field configures the number of RADIUS accounting retries.
U32 eqlRADIUSAcctRecvTimeout	1.3.6.1.4.1.12740.1.1.14.1.6	Unsigned32	read-write	This field configures the RADIUS accounting message receive timeout in seconds.
eqlRADIUSAcctServerEntry	1.3.6.1.4.1.12740.1.1.15.1		not-accessible	An entry (row) containing the configuration for a RADIUS accounting server.
I32 eqlRADIUSAcctServerIndex	1.3.6.1.4.1.12740.1.1.15.1.1	Integer32	not-accessible	This field specifies an index that uniquely identifies the RADIUS Accounting server entry.
IP eqlRADIUSAcctServerInetAddress	1.3.6.1.4.1.12740.1.1.15.1.7	InetAddress	read-create	This field contains the IP address, in network byte order, for the RADIUS Accounting server.
IPt eqlRADIUSAcctServerInetAddressType	1.3.6.1.4.1.12740.1.1.15.1.6	InetAddressType	read-create	This field contains the IP address type for the RADIUS Accounting server.
IP eqlRADIUSAcctServerIpAddress	1.3.6.1.4.1.12740.1.1.15.1.2	IpAddress	read-create	This field is deprecated and will be unsupported in the next release.
INT eqlRADIUSAcctServerPort	1.3.6.1.4.1.12740.1.1.15.1.3	INTEGER	read-create	The listening port number of the RADIUS Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default RADIUS Accounting port(port number 1813).
ROW eqlRADIUSAcctServerRowStatus	1.3.6.1.4.1.12740.1.1.15.1.4	RowStatus	read-create	row status
OCT eqlRADIUSAcctServerSecret	1.3.6.1.4.1.12740.1.1.15.1.5	OCTET STRING	read-write	This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.
eqlRADIUSAcctServerTable	1.3.6.1.4.1.12740.1.1.15		not-accessible	EqualLogic-Persistent Group RADIUS Accounting server table.
U32 eqlRADIUSAuthMaxRetries	1.3.6.1.4.1.12740.1.1.14.1.4	Unsigned32	read-write	This field configures the number of RADIUS authentication retries.
U32 eqlRADIUSAuthRecvTimeout	1.3.6.1.4.1.12740.1.1.14.1.3	Unsigned32	read-write	This field configures the RADIUS authentication message receive timeout in seconds.
eqlRADIUSEntry	1.3.6.1.4.1.12740.1.1.14.1		not-accessible	An entry (row) containing RADIUS information in a group.
T/F eqlRADIUSiscsiAuthEnable	1.3.6.1.4.1.12740.1.1.14.1.8	TruthValue	read-write	This field enables RADIUS authentication for ISCSI initiators.
T/F eqlRADIUSLoginAcctEnable	1.3.6.1.4.1.12740.1.1.14.1.5	TruthValue	read-write	This field enables RADIUS accounting for login administrators.
T/F eqlRADIUSLoginAuthEnable	1.3.6.1.4.1.12740.1.1.14.1.2	TruthValue	read-write	This field enables RADIUS login authentication.
T/F eqlRADIUSRequireAdminAttrEnable	1.3.6.1.4.1.12740.1.1.14.1.10	TruthValue	read-write	This field enables requiring the EQL-Admin RADIUS return attribute.
OCT eqlRADIUSSecret	1.3.6.1.4.1.12740.1.1.14.1.1	OCTET STRING	read-write	This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.
eqlRADIUSTable	1.3.6.1.4.1.12740.1.1.14		not-accessible	EqualLogic-Persistent Group RADIUS Configuration Table. This table maintains the configuration for the RADIUS implementation.
eqlRecordVersionEntry	1.3.6.1.4.1.12740.1.1.17.1		not-accessible	An entry (row) containing min and max record version.
U32 eqlRecordVersionMax	1.3.6.1.4.1.12740.1.1.17.1.3	Unsigned32	read-write	This field specifies the current REC_HDR::major value for records of this table.
U32 eqlRecordVersionMin	1.3.6.1.4.1.12740.1.1.17.1.2	Unsigned32	read-write	This field specifies the lowest REC_HDR::major value found in any record of this table.
eqlRecordVersionTable	1.3.6.1.4.1.12740.1.1.17		not-accessible	EqualLogic record version table.
U32 eqlRecordVersionTableType	1.3.6.1.4.1.12740.1.1.17.1.1	Unsigned32	not-accessible	This field identifies a specific MIB table by tableType_t (see tableTypes.h).
STR eqlStorageGroupAdminAccountAdGroupName	1.3.6.1.4.1.12740.1.1.10.1.23	DisplayString	read-create	The name of the Active Directory group, valid only when auth type is LDAP. Same as cn attribute of the AD group.
INT eqlStorageGroupAdminAccountAuthType	1.3.6.1.4.1.12740.1.1.10.1.15	INTEGER	read-create	This field represents the type of authentication for the administrator. Note that RADIUS/LDAP type users will only appear in the table after a successful login.
OCT eqlStorageGroupAdminAccountCHAPPassword	1.3.6.1.4.1.12740.1.1.10.1.21	OCTET STRING	read-create	An octet string containing the (cleartext) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.
STR eqlStorageGroupAdminAccountClass	1.3.6.1.4.1.12740.1.1.10.1.17	DisplayString	read-only	This field contains the contents of the class attribute received in the RADIUS Access-Request and must be reflected in the RADIUS Accounting-Request if accounting is enabled.
I32 eqlStorageGroupAdminAccountCliFlags	1.3.6.1.4.1.12740.1.1.10.1.12	Integer32	read-create	This field specifies the set of configuration flags used by the CLI. These flags allow the administrator to save CLI configuration settings between the CLI sessions. The meaning of individual bits is not defined yet. TBD
STR eqlStorageGroupAdminAccountContact	1.3.6.1.4.1.12740.1.1.10.1.7	DisplayString	read-create	This field contains the full name of the owner of this administration account.
STR eqlStorageGroupAdminAccountDescription	1.3.6.1.4.1.12740.1.1.10.1.5	UTFString	read-create	This field contains a description of the administration account.
STR eqlStorageGroupAdminAccountEmail	1.3.6.1.4.1.12740.1.1.10.1.8	DisplayString	read-create	This field specifies the email address of the owner of this administration account.
eqlStorageGroupAdminAccountEntry	1.3.6.1.4.1.12740.1.1.10.1		not-accessible	An entry (row) containing administration account settings.
I32 eqlStorageGroupAdminAccountGuiFlags	1.3.6.1.4.1.12740.1.1.10.1.13	Integer32	read-create	This field specifies the set of configuration flags used by the GUI. These flags allow the administrator to save GUI configuration settings between the GUI sessions. The meaning of individual bits is not defined yet. TBD
I32 eqlStorageGroupAdminAccountIndex	1.3.6.1.4.1.12740.1.1.10.1.1	Integer32	not-accessible	The index value that uniquely identifies the administration account record.
INT eqlStorageGroupAdminAccountIndexValue	1.3.6.1.4.1.12740.1.1.21.1.1	INTEGER	read-only	The index to use to access the group admin account associated with the key specified.
U32 eqlStorageGroupAdminAccountKey	1.3.6.1.4.1.12740.1.1.10.1.22	Unsigned32	read-only	A value to uniquely identify this account. The MIB attribute eqliscsiVolumeAdminAccountKey uses this value to associate a volume with an account. No two accounts can have the same value.
eqlStorageGroupAdminAccountKeyEntry	1.3.6.1.4.1.12740.1.1.21.1		not-accessible	An entry (row) containing the value of the account index.
eqlStorageGroupAdminAccountKeyTable	1.3.6.1.4.1.12740.1.1.21		not-accessible	EqualLogic-Dynamic table converting a eqlStorageGroupAdminAccountKey to a eqlStorageGroupAdminAccountIndex.
STR eqlStorageGroupAdminAccountMobile	1.3.6.1.4.1.12740.1.1.10.1.10	DisplayString	read-create	This field specifies the cell phone number of the owner of this administration account.
STR eqlStorageGroupAdminAccountName	1.3.6.1.4.1.12740.1.1.10.1.3	DisplayString	read-create	EQL-SECONDARY-KEY The name of the administration account. This name must be used for user authentication.
OCT eqlStorageGroupAdminAccountPassword	1.3.6.1.4.1.12740.1.1.10.1.4	OCTET STRING	read-create	An octet string containing the (crypt cipher) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.
STR eqlStorageGroupAdminAccountPhone	1.3.6.1.4.1.12740.1.1.10.1.9	DisplayString	read-create	This field specifies the phone number of the owner of this administration account.
I32 eqlStorageGroupAdminAccountPollInterval	1.3.6.1.4.1.12740.1.1.10.1.14	Integer32	read-create	The value of this field specifies how often the group configuration data must be repolled by the GUI. This value is expressed in seconds. The minimum is 5 seconds; the maximum is 1 hour. The default is 30 seconds.
ADM eqlStorageGroupAdminAccountPrivilege	1.3.6.1.4.1.12740.1.1.10.1.18	AdminAccountPrivilegeType	read-create	This field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. volume-admin designates the administrator to have access to specific volumes within specific storage pools.
C32 eqlStorageGroupAdminAccountRecentLogin	1.3.6.1.4.1.12740.1.1.10.1.16	Counter32	read-only	This field represents a timestamp of the most recent time this admin account has logged in. Currently only applies to radius auth type users.
ROW eqlStorageGroupAdminAccountRowStatus	1.3.6.1.4.1.12740.1.1.10.1.2	RowStatus	read-create	This value is used to manage the conceptual row.
OCT eqlStorageGroupAdminAccountSnmpKey	1.3.6.1.4.1.12740.1.1.10.1.19	OCTET STRING	read-create	This field contain part of the SNMP key for this account.
OCT eqlStorageGroupAdminAccountSnmpKey2	1.3.6.1.4.1.12740.1.1.10.1.20	OCTET STRING	read-create	This field contain part of the SNMP second key for this account.
INT eqlStorageGroupAdminAccountSNMPPrivProt	1.3.6.1.4.1.12740.1.1.10.1.24	INTEGER	read-create	An enum field used by the Agent to determine which privacy protocol is used to encrypt external SNMP messages for this user.
INT eqlStorageGroupAdminAccountStatus	1.3.6.1.4.1.12740.1.1.10.1.11	INTEGER	read-create	This field represents the administration status of the account. Disabling the account will prevent the user from logging into CLI and GUI. Currently logged-in sessions will not be affected.
eqlStorageGroupAdminAccountTable	1.3.6.1.4.1.12740.1.1.10		not-accessible	EqualLogic-Persistent Storage Group Administration account table. This table contains a collection of administration account records. It is indexed by group id and administration account record index.
ADM eqlStorageGroupAdminAccountType	1.3.6.1.4.1.12740.1.1.10.1.6	AdminAccountType	read-create	This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected.
eqlStorageGroupAlertEmailEntry	1.3.6.1.4.1.12740.1.1.9.1		not-accessible	An entry (row) containing group alert email info.
eqlStorageGroupAlertEmailTable	1.3.6.1.4.1.12740.1.1.9		not-accessible	EqualLogic-Persistent Storage Group Email Alert Table
U32 eqlStorageGroupChapAccountAdminAccountKey	1.3.6.1.4.1.12740.1.1.22.1.3	Unsigned32	read-create	A value to uniquely identify this administrative account that created this CHAP account. This value matches the eqlStorageGroupAdminAccountKey of the creating account. If no account exists with a matching account key, then the administrative account that created this CHAP account has been deleted.
eqlStorageGroupChapAccountEntry	1.3.6.1.4.1.12740.1.1.22.1		not-accessible	An entry (row) containing administration account settings.
I32 eqlStorageGroupChapAccountIndex	1.3.6.1.4.1.12740.1.1.22.1.1	Integer32	not-accessible	The index value that uniquely identifies the CHAP account record.
T/F eqlStorageGroupChapAccountPublic	1.3.6.1.4.1.12740.1.1.22.1.4	TruthValue	read-create	If true, the name of the associated CHAP account is viewable by all admin accounts. If false, the name of the associated CHAP account is not viewable by volume administrator accounts that did not create the associated CHAP account
ROW eqlStorageGroupChapAccountRowStatus	1.3.6.1.4.1.12740.1.1.22.1.2	RowStatus	read-create	This value is used to manage the conceptual row.
eqlStorageGroupChapAccountTable	1.3.6.1.4.1.12740.1.1.22		not-accessible	EqualLogic-Persistent Storage Group CHAP account table. This table contains a collection of CHAP account records, each containing Equallogic specific CHAP account information. It is indexed by group id and CHAP account record index. There should be a row in this table for every row with index 1.1.X in table ipsAuthCredChapAttributesTable. Also, chapIndex is equal to ipsAuthCredIndex.
eqlStorageGroupChapServerEntry	1.3.6.1.4.1.12740.1.1.6.1		not-accessible	An entry (row) containing storage group chap server information.
eqlStorageGroupChapServerTable	1.3.6.1.4.1.12740.1.1.6		not-accessible	EqualLogic-Persistent Storage Group Chap Server Table
eqlStorageGroupCollectionEntry	1.3.6.1.4.1.12740.1.1.13.1		not-accessible	An entry (row) containing volume/snap collections information in a group.
eqlStorageGroupCollectionTable	1.3.6.1.4.1.12740.1.1.13		not-accessible	EqualLogic-Dynamic Group Collection Table. This table maintains overall number of volume collections and snap collection in a group.
eqlStorageGroupDnsServerEntry	1.3.6.1.4.1.12740.1.1.4.1		not-accessible	An entry (row) containing group dns server information.
eqlStorageGroupDnsServerTable	1.3.6.1.4.1.12740.1.1.4		not-accessible	EqualLogic-Persistent Storage Group DNS Server Table TimeoutAll:600
eqlStorageGroupDnsSuffixEntry	1.3.6.1.4.1.12740.1.1.26.1		not-accessible	An entry (row) containing group dns suffix information.
eqlStorageGroupDnsSuffixTable	1.3.6.1.4.1.12740.1.1.26		not-accessible	EqualLogic-Persistent Storage Group DNS Suffix Table TimeoutAll:600
eqlStorageGroupEntry	1.3.6.1.4.1.12740.1.1.1.1		not-accessible	An entry (row) containing storage group information.
eqlStorageGroupiSNSServerEntry	1.3.6.1.4.1.12740.1.1.11.1		not-accessible	An entry (row) containing group iSNS server information.
eqlStorageGroupiSNSServerTable	1.3.6.1.4.1.12740.1.1.11		not-accessible	EqualLogic-Persistent Storage Group iSNS Server Table
eqlStorageGroupNtpServerEntry	1.3.6.1.4.1.12740.1.1.5.1		not-accessible	An entry (row) containing group ntp server information.
eqlStorageGroupNtpServerTable	1.3.6.1.4.1.12740.1.1.5		not-accessible	EqualLogic-Persistent Storage Group NTP Server Table
eqlStorageGroupProfileEntry	1.3.6.1.4.1.12740.1.1.20.1		not-accessible	An entry (row) containing the profile limits and configuration information.
U32 eqlStorageGroupProfileMaxConnections	1.3.6.1.4.1.12740.1.1.20.1.9	Unsigned32	read-only	This field specifies the maximum number of connections allowed per pool.
U32 eqlStorageGroupProfileMaxConnWarning	1.3.6.1.4.1.12740.1.1.20.1.11	Unsigned32	read-only	This field specifies when will warning be issued for connection limit.
U32 eqlStorageGroupProfileMaxMembers	1.3.6.1.4.1.12740.1.1.20.1.3	Unsigned32	read-only	This field specifies the maximum members that can exist in the group with this profile id.
U32 eqlStorageGroupProfileMaxPartners	1.3.6.1.4.1.12740.1.1.20.1.10	Unsigned32	read-only	This field specifies the maximum number of partners in group.
U32 eqlStorageGroupProfileMaxReplicasPerVolume	1.3.6.1.4.1.12740.1.1.20.1.7	Unsigned32	read-only	This field specifies the maximum number of Replicas per volume.
U32 eqlStorageGroupProfileMaxReplVolumes	1.3.6.1.4.1.12740.1.1.20.1.8	Unsigned32	read-only	This field specifies the maximum number of replication volumes in group.
U32 eqlStorageGroupProfileMaxSnapsPerGroup	1.3.6.1.4.1.12740.1.1.20.1.5	Unsigned32	read-only	This field specifies the maximum number of snaps in group.
U32 eqlStorageGroupProfileMaxSnapsPerVolume	1.3.6.1.4.1.12740.1.1.20.1.6	Unsigned32	read-only	This field specifies the maximum number of snaps per volume.
U32 eqlStorageGroupProfileMaxSyncReplVolumes	1.3.6.1.4.1.12740.1.1.20.1.12	Unsigned32	read-only	This field specifies the maximum number of Sync Repl volumes allowed in the group.
U32 eqlStorageGroupProfileMaxVolumes	1.3.6.1.4.1.12740.1.1.20.1.4	Unsigned32	read-only	This field specifies the maximum number of volumes in group.
eqlStorageGroupProfileTable	1.3.6.1.4.1.12740.1.1.20		not-accessible	EqualLogic-Persistent Group Profile Table
U32 eqlStorageGroupProfileVersion	1.3.6.1.4.1.12740.1.1.20.1.1	Unsigned32	read-only	This field specifies the current version of the Profile. The most significant 16 bits are the compat level, the least significant 16 bits are the profile version.
U32 eqlStorageGroupProfileWeight	1.3.6.1.4.1.12740.1.1.20.1.2	Unsigned32	read-only	This field specifies the current weight of the Profile
eqlStorageGroupSiteEntry	1.3.6.1.4.1.12740.1.1.3.1		not-accessible	An entry (row) containing storage group site information.
eqlStorageGroupSiteTable	1.3.6.1.4.1.12740.1.1.3		not-accessible	EqualLogic-Persistent Storage Group Site Table
eqlStorageGroupSMTPServerEntry	1.3.6.1.4.1.12740.1.1.7.1		not-accessible	An entry (row) containing group smtp sever information.
eqlStorageGroupSMTPServerTable	1.3.6.1.4.1.12740.1.1.7		not-accessible	EqualLogic-Persistent Storage Group SMTP Server Table
eqlStorageGroupSnmpEntry	1.3.6.1.4.1.12740.1.1.27.1		not-accessible	An entry (row) containing snmp information.
OCT eqlStorageGroupSnmpManagersList	1.3.6.1.4.1.12740.1.1.27.1.2	OCTET STRING	read-create	Specifies a list of SNMP managers that can receive SNMP traps. Contains Max of 5 comma separated IP addresses.
STR eqlStorageGroupSnmpReadOnlyCommunity	1.3.6.1.4.1.12740.1.1.31.1.1	DisplayString	read-create	Specifies SNMP read only community string.
eqlStorageGroupSnmpReadOnlyCommunityEntry	1.3.6.1.4.1.12740.1.1.31.1		not-accessible	An entry (row) containing snmp community information.
eqlStorageGroupSnmpReadOnlyCommunityTable	1.3.6.1.4.1.12740.1.1.31		not-accessible	EqualLogic-Dynamic Storage Group Snmp Read Only Community Table. Used solely to manage the Group SNMP read only community string.
ROW eqlStorageGroupSnmpRowStatus	1.3.6.1.4.1.12740.1.1.27.1.1	RowStatus	read-create	Rowstatus
eqlStorageGroupSnmpTable	1.3.6.1.4.1.12740.1.1.27		not-accessible	EqualLogic-Dynamic Storage Group Snmp Table. Used solely to communicate Group Snmp params to the Appliance.
OCT eqlStorageGroupSnmpTrapCommunity	1.3.6.1.4.1.12740.1.1.27.1.3	OCTET STRING	read-create	Specifies the trap read-only community string.
U32 eqlStorageGroupStatsTotalSpaceBorrowing	1.3.6.1.4.1.12740.1.1.2.1.32	Unsigned32	read-only	This field specifies the total amount of borrowing against other volume's free snapshot reserve and pool free space. This includes snapshots and recoverable volumes.
C64 eqlStorageGroupStatusCompressedSpaceUsed	1.3.6.1.4.1.12740.1.1.2.1.39	Counter64	read-only	This field specifies the total amount of space in MB that is currently utilized for compressed pages. This is a dynamic value and cannot be set.
I32 eqlStorageGroupStatusConnectionCount	1.3.6.1.4.1.12740.1.1.2.1.24	Integer32	read-only	This field gives the number of iSCSI connections that are currently connected to volumes in this group.
U32 eqlStorageGroupStatusDateAndTime	1.3.6.1.4.1.12740.1.1.2.1.6	Unsigned32	read-write	This field specifies the current time in group represented as number of seconds since epoch.
I32 eqlStorageGroupStatusDelegatedUsedSpace	1.3.6.1.4.1.12740.1.1.2.1.17	Integer32	read-only	This field specifies the amount of space used by external services such as remote replication. This sum represents total space used by all of the entries in the replicant site table
eqlStorageGroupStatusEntry	1.3.6.1.4.1.12740.1.1.2.1		not-accessible	An entry (row) containing Group status information.
U32 eqlStorageGroupStatusFailbackSpace	1.3.6.1.4.1.12740.1.1.2.1.22	Unsigned32	read-only	This field represents the amount of space consumed by fail-back replicasets in this storage group.
I32 eqlStorageGroupStatusFreeSpace	1.3.6.1.4.1.12740.1.1.2.1.15	Integer32	read-only	This field specifies the total free space of the Storage Pool in Mega Bytes.
OCT eqlStorageGroupStatusGroupId	1.3.6.1.4.1.12740.1.1.2.1.27	OCTET STRING	read-only	This represents an ID uniquely representing a group.
I32 eqlStorageGroupStatusMemberCount	1.3.6.1.4.1.12740.1.1.2.1.13	Integer32	read-only	This field specifies the total number of members in this group irrelevant of current member state.
I32 eqlStorageGroupStatusMembersInUse	1.3.6.1.4.1.12740.1.1.2.1.14	Integer32	read-only	This field specifies the total number of online+offline members in this group.
I32 eqlStorageGroupStatusPoolSpace	1.3.6.1.4.1.12740.1.1.2.1.1	Integer32	read-only	This field specifies the total size of the Storage Pool in MBs.
I32 eqlStorageGroupStatusPoolSpaceDelegated	1.3.6.1.4.1.12740.1.1.2.1.16	Integer32	read-only	This field specifies the amount of free space of the Storage Pool which has been partitioned for use by external services such as remote replication. This space is reserved and can be controlled by the users of these services. This sum represents total space reserved by all of the entries in the replicant site table
I32 eqlStorageGroupStatusPoolSpaceReserved	1.3.6.1.4.1.12740.1.1.2.1.4	Integer32	read-only	This field specifies the total space reserved for SnapShot data within the Storage Pool in MBs.
I32 eqlStorageGroupStatusPoolSpaceUsedEx	1.3.6.1.4.1.12740.1.1.2.1.2	Integer32	read-only	This field specifies the total space reserved for volume data within the Storage Pool in MBs. Note that this value does not include space reserved for snapshots or replication.
U32 eqlStorageGroupStatusReplicationSnapCount	1.3.6.1.4.1.12740.1.1.2.1.41	Unsigned32	read-only	This field specifies the total number of snapshot resources that are being consumed for replication. This includes inbound replicas, and temporary snapshots used for in-progress outbound replication.
U32 eqlStorageGroupStatusReplReserveInUse	1.3.6.1.4.1.12740.1.1.2.1.19	Unsigned32	read-only	This sum represents total space in use for all volumes for replication purposes. This value will be equal to sum of eqlMemberReplStorage for all members.
U32 eqlStorageGroupStatusReplReserveSpace	1.3.6.1.4.1.12740.1.1.2.1.18	Unsigned32	read-only	This sum represents total space reserved for all volumes for replication purposes.
U32 eqlStorageGroupStatusReplReserveSpaceFree	1.3.6.1.4.1.12740.1.1.2.1.26	Unsigned32	read-only	This represents the total space still available for Replica Snapshot usage.
I32 eqlStorageGroupStatusReservedSpaceInUse	1.3.6.1.4.1.12740.1.1.2.1.5	Integer32	read-only	This field specifies the total reserved space in use by snapshots in the storage pool . This will be equal to sum of eqlMemberSnapStorage for all members.
U32 eqlStorageGroupStatusSnapReserveSpaceFree	1.3.6.1.4.1.12740.1.1.2.1.25	Unsigned32	read-only	This represents the total space still available for Snapshot usage.
I32 eqlStorageGroupStatusSnapshotCountEx	1.3.6.1.4.1.12740.1.1.2.1.11	Integer32	read-only	This field specifies the total number of snapshots in this group.
I32 eqlStorageGroupStatusSnapshotsInUse	1.3.6.1.4.1.12740.1.1.2.1.7	Integer32	read-only	This field specifies the total number of snapshots within the group that currently have active iSCSI connections.
I32 eqlStorageGroupStatusSnapshotsOnline	1.3.6.1.4.1.12740.1.1.2.1.9	Integer32	read-only	This field specifies the total number of snapshots available for iSCSI connections.
I32 eqlStorageGroupStatusStorageContainerCount	1.3.6.1.4.1.12740.1.1.2.1.34	Integer32	read-only	This field specifies the total number of storage containers within the group.
U32 eqlStorageGroupStatusStorageContainerSnapCount	1.3.6.1.4.1.12740.1.1.2.1.36	Unsigned32	read-only	This field specifies the total number of snapshot resources that are being consumed within all storage containers.
C64 eqlStorageGroupStatusStorageContainerSpaceReserved	1.3.6.1.4.1.12740.1.1.2.1.38	Counter64	read-only	This field specifies the total amount of storage that is being consumed within all storage containers.
U32 eqlStorageGroupStatusStorageContainerVolumeCount	1.3.6.1.4.1.12740.1.1.2.1.35	Unsigned32	read-only	This field specifies the total number of volume resources that are being consumed within all storage containers.
I32 eqlStorageGroupStatusStorageContainerVolumesBound	1.3.6.1.4.1.12740.1.1.2.1.42	Integer32	read-only	This field specifies the total number of bound volume across all storage containers.
I32 eqlStorageGroupStatusStorageContainerVolumesOnline	1.3.6.1.4.1.12740.1.1.2.1.37	Integer32	read-only	This field specifies the total number of online volume resources that are being consumed within all storage containers.
eqlStorageGroupStatusTable	1.3.6.1.4.1.12740.1.1.2		not-accessible	EqualLogic-Dynamic Group Status Table
I32 eqlStorageGroupStatusThinProvFreeSpace	1.3.6.1.4.1.12740.1.1.2.1.23	Integer32	read-only	This field represents the amount of space available for Thin Provisioned Volumes in this storage group.
I32 eqlStorageGroupStatusTotalMembersOnLine	1.3.6.1.4.1.12740.1.1.2.1.3	Integer32	read-only	This field specifies the number of group members which are online.
C64 eqlStorageGroupStatusVirtualSpaceSize	1.3.6.1.4.1.12740.1.1.2.1.40	Counter64	read-only	This field specifies the total amount of space in MB that would be utilized by compressed pages if there was no compression.
U32 eqlStorageGroupStatusVirtualVolumeCount	1.3.6.1.4.1.12740.1.1.2.1.28	Unsigned32	read-only	This field specifies the total number of volumes in this group, adjusted to remove volumes not typically visible such as synchronous replication standbys.
U32 eqlStorageGroupStatusVirtualVolumesInUse	1.3.6.1.4.1.12740.1.1.2.1.30	Unsigned32	read-only	This field specifies the total number of volumes within the group that currently have active iSCSI connections excluding synchronous replication standbys.
U32 eqlStorageGroupStatusVirtualVolumesOnline	1.3.6.1.4.1.12740.1.1.2.1.29	Unsigned32	read-only	This field specifies the total number of volumes available for iSCSI connections, excluding synchronous replication standbys.
U32 eqlStorageGroupStatusVirtualVolumeSpaceSubscribed	1.3.6.1.4.1.12740.1.1.2.1.31	Unsigned32	read-only	This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field in volume mib. This value is adjusted to exclude subscribed space for synchronous replication standby volumes.
I32 eqlStorageGroupStatusVolumeCount	1.3.6.1.4.1.12740.1.1.2.1.12	Integer32	read-only	This field specifies the total number of volumes in this group.
I32 eqlStorageGroupStatusVolumesInUse	1.3.6.1.4.1.12740.1.1.2.1.8	Integer32	read-only	This field specifies the total number of snapshotsvolumes within the group that currently have active iSCSI connections.
I32 eqlStorageGroupStatusVolumesOnline	1.3.6.1.4.1.12740.1.1.2.1.10	Integer32	read-only	This field specifies the total number of volumes available for iSCSI connections.
U32 eqlStorageGroupStatusVolumeSpaceAllocated	1.3.6.1.4.1.12740.1.1.2.1.21	Unsigned32	read-only	The value of this object represents the sum of actual materialized pages for all volumes in the group.
U32 eqlStorageGroupStatusVolumeSpaceSubscribed	1.3.6.1.4.1.12740.1.1.2.1.20	Unsigned32	read-only	This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field in volume mib.
eqlStorageGroupSysLogServerEntry	1.3.6.1.4.1.12740.1.1.8.1		not-accessible	An entry (row) containing group syslog server info.
eqlStorageGroupSysLogServerTable	1.3.6.1.4.1.12740.1.1.8		not-accessible	EqualLogic-Persistent Storage Group SysLog Server Table
eqlStorageGroupTable	1.3.6.1.4.1.12740.1.1.1		not-accessible	EqualLogic-Persistent Storage Group Table
I32 eqlUserSessionAdminAccountIndex	1.3.6.1.4.1.12740.1.1.16.1.2	Integer32	read-write	This field specifies an index that uniquely identifies a storage group admin account entry.
eqlUserSessionEntry	1.3.6.1.4.1.12740.1.1.16.1		not-accessible	An entry (row) containing an active user administrative session.
U32 eqlUserSessionIndex	1.3.6.1.4.1.12740.1.1.16.1.1	Unsigned32	not-accessible	This field specifies an index that uniquely identifies the user session entry.
IP eqlUserSessionLocalAddress	1.3.6.1.4.1.12740.1.1.16.1.6	IpAddress	read-write	This field is deprecated and will be unsupported in the next release.
IP eqlUserSessionLocalInetAddress	1.3.6.1.4.1.12740.1.1.16.1.10	InetAddress	read-write	The local interface IP address, if applicable, at which the administrator is connecting.
IPt eqlUserSessionLocalInetAddressType	1.3.6.1.4.1.12740.1.1.16.1.9	InetAddressType	read-write	The local interface IP address type, if applicable, at which the administrator is connecting.
INT eqlUserSessionProtocol	1.3.6.1.4.1.12740.1.1.16.1.4	INTEGER	read-write	The incoming protocol through which the administrator is connecting to the array.
IP eqlUserSessionRemoteAddress	1.3.6.1.4.1.12740.1.1.16.1.5	IpAddress	read-write	This field is deprecated and will be unsupported in the next release.
IP eqlUserSessionRemoteInetAddress	1.3.6.1.4.1.12740.1.1.16.1.8	InetAddress	read-write	The remote IP address, if applicable, from which the administrator is connecting.
IPt eqlUserSessionRemoteInetAddressType	1.3.6.1.4.1.12740.1.1.16.1.7	InetAddressType	read-write	The remote IP address type, if applicable, from which the administrator is connecting.
C32 eqlUserSessionStart	1.3.6.1.4.1.12740.1.1.16.1.3	Counter32	read-write	The timestamp from the start of the administrative session.
eqlUserSessionTable	1.3.6.1.4.1.12740.1.1.16		not-accessible	EqualLogic-Dynamic user session table.

RFC description

Dell EqualLogic SNMP agent MIB for managing PS Series storage group configuration objects, CHAP/SMTP/Syslog settings, and trap notifications.

Start monitoring Dell EqualLogic PS-series iSCSI SAN storage array group (membership/capacity) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EQLGROUP-MIB