ENTERASYS-TRACKED-OBJECTS-MIB

All MIBs › ENTERASYS-TRACKED-OBJECTS-MIB

Organization: Enterasys Networks, Inc.

Last Updated: 2013-02-07

Category: Vendor: Enterasys/Cabletron

Description: Enterasys Networks MIB for configuring probe and tracked objects used in IP SLA and state-based routing policies.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ENTERASYS-TRACKED-OBJECTS-MIB?

ENTERASYS-TRACKED-OBJECTS-MIB is an Enterasys Networks proprietary MIB for configuring IP SLA-style probes and 'tracked objects' used to drive state-based routing or failover policies on Enterasys devices. It exposes resource-capacity data (maximum vs. currently-used objects, probes, active probes, sessions, and interface associations) along with a probe configuration table. Its main monitoring value is software resource-utilization visibility: how many tracking probes and sessions are configured versus the device's supported maximum, which is critical for capacity planning before adding new tracked routes or objects. No explicit dependency on another standard MIB is stated, though the feature parallels functionality found in Cisco's IP SLA and Object Tracking mechanisms. It is used in Enterasys routers/switches implementing policy-based routing or high-availability designs that key off reachability probes. Engineers can download the ENTERASYS-TRACKED-OBJECTS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ENTERASYS-TRACKED-OBJECTS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Enterasys/Extreme Networks routers and switches

Monitoring Examples

An admin would compare etsysTrackedObjectsProbesUsed to etsysTrackedObjectsMaxProbes and etsysTrackedObjectsSessionsUsed to etsysTrackedObjectsMaxSessions to see if the device is nearing its tracking capacity before configuring additional probes. Walking etsysTrackedObjectsProbeTable/etsysTrackedObjectsProbeEntry shows each configured probe's parameters, letting the admin confirm a failover-triggering probe is defined as expected. A high etsysTrackedObjectsIntfAssocUsed relative to etsysTrackedObjectsMaxIntfAssoc would indicate the interface-association limit is close to being exhausted.

What Can Be Monitored

tracked object count vs. maximum
probe count vs. maximum
active probe (ACV) usage
tracking session count vs. maximum
interface association usage

Imported Objects

From ENTERASYS-MIB-NAMES

etsysModules

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType
InetPortNumber

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using etsysTrackedObjectsSessionStateChanges OID:

Select an Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (IP SLA-style tracked object probes) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type etsysTrackedObjectsSessionStateChanges into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of times the etsysTrackedObjectsSessionState object has changed state. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
etsysTrackedObjects	1.3.6.1.4.1.5624.1.2.79.1
G32 etsysTrackedObjectsAcvProbesUsed	1.3.6.1.4.1.5624.1.2.79.1.1.6	Gauge32	read-only	The current number of ACV probes that are configured.
STR etsysTrackedObjectsCommonActionDown	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.9	SnmpAdminString	read-write	The name of a script file local to the system that is provided to the client applications when informing them this tracked object transitioned to the 'down' state. It is the client applications responsibility to verify the contents of the file.
STR etsysTrackedObjectsCommonActionUp	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.8	SnmpAdminString	read-write	The name of a script file local to the system that is provided to the client applications when informing them this tracked object transitioned to the 'up' state. It is the client applications responsibility to verify the contents of the file.
U32 etsysTrackedObjectsCommonDelayDown	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.5	Unsigned32	read-write	The amount of time the system waits prior to informing the client applications of a 'down' status for the etsysTrackedObjectsState object. If the etsysTrackedObjectsState object transitions back to the 'up' state prior to the delay period expiring, the client applications are not informed.
U32 etsysTrackedObjectsCommonDelayUp	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.4	Unsigned32	read-write	The amount of time the system waits prior to informing the client applications of an 'up' status for the etsysTrackedObjectsState object. If the etsysTrackedObjectsState object transitions back to the 'down' state prior to the delay period expiring, the client applications are not informed.
STR etsysTrackedObjectsCommonDescription	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.6	SnmpAdminString	read-write	A user provided description of this entry.
etsysTrackedObjectsCommonEntry	1.3.6.1.4.1.5624.1.2.79.1.2.3.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsCommonTable.
etsysTrackedObjectsCommonGroup	1.3.6.1.4.1.5624.1.2.79.2.1.4			This group defines the common attributes shared by tracked objects.
T/F etsysTrackedObjectsCommonInservice	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.7	TruthValue	read-write	A toggle mechanism that allows the tracked object to be put into service and taken out of service. A tracked object is inservice when the value of this object is set to 'true'. In this case, the system is actively tracking the status of the object. A tracked object is not-inservice when the value of this object is set to 'false'. In this case, the system does not monitor the status of the tracked object.
STR etsysTrackedObjectsCommonName	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.1	SnmpAdminString	not-accessible	The name given to this tracked object.
INT etsysTrackedObjectsCommonState	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.3	INTEGER	read-only	The current state of the tracked object. up(1) - The tracked object has been detected as being up. down(2) - The tracked object has been detected as being down. testing(3) - The system is in the process of determining the initial state of the tracked object. disabled(4) - The tracked object has been taken out of service (etsysTrackedObjectsCommonInservice has been set to 'false').
etsysTrackedObjectsCommonTable	1.3.6.1.4.1.5624.1.2.79.1.2.3		not-accessible	This table contains the objects pertaining to the common attributes shared by the tracked objects.
INT etsysTrackedObjectsCommonType	1.3.6.1.4.1.5624.1.2.79.1.2.3.1.2	INTEGER	read-only	The object type that is tracked by this entry. The objects non-common attributes are in one of the following tables based on the type: interface(1) - etsysTrackedObjectsIntfTable ipRoute(2) - etsysTrackedObjectsRouteTable portGroup(3) - etsysTrackedObjectsPortGroupTable portIfSpeed(4) - etsysTrackedObjectsPortIfSpeedTable
etsysTrackedObjectsCompliance	1.3.6.1.4.1.5624.1.2.79.2.2.1			The compliance statement for devices that support etsysTrackedObjects.
etsysTrackedObjectsCompliance2	1.3.6.1.4.1.5624.1.2.79.2.2.2			The compliance statement for devices that support etsysTrackedObjects.
etsysTrackedObjectsCompliances	1.3.6.1.4.1.5624.1.2.79.2.2
etsysTrackedObjectsConformance	1.3.6.1.4.1.5624.1.2.79.2
etsysTrackedObjectsGlobalGroup	1.3.6.1.4.1.5624.1.2.79.2.1.1			This group defines information pertaining to the global resources used by Enterasys Tracked Objects.
etsysTrackedObjectsGlobalGroup2	1.3.6.1.4.1.5624.1.2.79.2.1.11			This group defines information pertaining to the global resources used by Enterasys Tracked Objects.
etsysTrackedObjectsGlobals	1.3.6.1.4.1.5624.1.2.79.1.1
etsysTrackedObjectsGroups	1.3.6.1.4.1.5624.1.2.79.2.1
etsysTrackedObjectsIfGroup	1.3.6.1.4.1.5624.1.2.79.2.1.5			This group defines the configuration parameters for tracking local interfaces.
G32 etsysTrackedObjectsIntfAssocUsed	1.3.6.1.4.1.5624.1.2.79.1.1.10	Gauge32	read-only	The current number of system wide objects that are used to associate an InterfaceIndex with either a 'portGroup' or a 'portIfSpeed' tracked object.
etsysTrackedObjectsIntfEntry	1.3.6.1.4.1.5624.1.2.79.1.2.4.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsIntfTable.
NUM etsysTrackedObjectsIntfIndex	1.3.6.1.4.1.5624.1.2.79.1.2.4.1.1	InterfaceIndex	read-create	The MIB-II ifIndex of the interface being tracked. The value of this object MAY NOT be modified after creating the row.
INT etsysTrackedObjectsIntfOption	1.3.6.1.4.1.5624.1.2.79.1.2.4.1.2	INTEGER	read-create	The following are the tracked object options available for interfaces. line-protocol(1) - Track the operational status of the interface. The value of this object MAY NOT be modified after creating the row.
ROW etsysTrackedObjectsIntfStatus	1.3.6.1.4.1.5624.1.2.79.1.2.4.1.3	RowStatus	read-create	This object permits management of the table by facilitating actions such as row creation and deletion. Creation and activation of a conceptual row in this table MUST be performed as a single operation by setting this object to createAndGo(4). Suspension of an active conceptual row is not supported. Consequently, setting this object to createAndWait(5) or notInService(2) SHALL fail.
etsysTrackedObjectsIntfTable	1.3.6.1.4.1.5624.1.2.79.1.2.4		not-accessible	This table provides the configuration parameters pertaining to local interface tracked objects. VLANs and tunnels are the supported interface types. The objects in this table cannot be modified after row creation with the exception of the RowStatus object. An entry created via this table will have a corresponding entry in the etsysTrackedObjectsCommonTable, which contains objects that are modifiable after row creation.
U32 etsysTrackedObjectsMaxAcvProbes	1.3.6.1.4.1.5624.1.2.79.1.1.5	Unsigned32	read-only	The maximum number of Application Content Verification (ACV) probes that can be configured.
U32 etsysTrackedObjectsMaxIntfAssoc	1.3.6.1.4.1.5624.1.2.79.1.1.9	Unsigned32	read-only	The maximum number of system wide objects available to associate an InterfaceIndex with either a 'portGroup' or a 'portIfSpeed' tracked object.
U32 etsysTrackedObjectsMaxObjects	1.3.6.1.4.1.5624.1.2.79.1.1.1	Unsigned32	read-only	The maximum number of tracked objects that can be configured to monitor local entities.
U32 etsysTrackedObjectsMaxProbes	1.3.6.1.4.1.5624.1.2.79.1.1.3	Unsigned32	read-only	The maximum number of probes that can be configured to monitor remote entities.
U32 etsysTrackedObjectsMaxSessions	1.3.6.1.4.1.5624.1.2.79.1.1.7	Unsigned32	read-only	The maximum number of probe sessions that can be configured by Enterasys client applications.
etsysTrackedObjectsMIB	1.3.6.1.4.1.5624.1.2.79			This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to the Tracked Objects functionality. This MIB was designed to be used for configuring probes and tracked objects. Each probe and tracked object has configuration parameters that may also be controlled via this MIB.
G32 etsysTrackedObjectsObjectsUsed	1.3.6.1.4.1.5624.1.2.79.1.1.2	Gauge32	read-only	The current number of tracked objects that are configured.
etsysTrackedObjectsPortEntry	1.3.6.1.4.1.5624.1.2.79.1.2.7.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsPortTable.
etsysTrackedObjectsPortGroup	1.3.6.1.4.1.5624.1.2.79.2.1.7			This group defines the configuration parameters for tracking port groups.
G32 etsysTrackedObjectsPortGroupDownCount	1.3.6.1.4.1.5624.1.2.79.1.2.6.1.5	Gauge32	read-only	The number of ports in the 'portGroup' that are down.
U32 etsysTrackedObjectsPortGroupDownThresh	1.3.6.1.4.1.5624.1.2.79.1.2.6.1.7	Unsigned32	read-create	The threshold used to determine when to set the tracked object's etsysTrackedObjectsCommonState to 'down'. If the value of etsysTrackedObjectsPortGroupUpCount is less than or equal to this value, the etsysTrackedObjectsCommonState for this tracked object is set to 'down'. This value MUST be less than the value specified in etsysTrackedObjectsPortGroupUpThresh. An inconsistentValue error is returned if the value of a set operation is greater than or equal to etsysTrackedObjectsPortGroupUpThresh.
etsysTrackedObjectsPortGroupEntry	1.3.6.1.4.1.5624.1.2.79.1.2.6.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsPortGroupTable.
G32 etsysTrackedObjectsPortGroupMemberCount	1.3.6.1.4.1.5624.1.2.79.1.2.6.1.2	Gauge32	read-only	The number of ports that are members of this 'portGroup'.
U32 etsysTrackedObjectsPortGroupMemberMax	1.3.6.1.4.1.5624.1.2.79.1.2.6.1.1	Unsigned32	read-only	The maximum number of ports that may be members of this 'portGroup'.
STR etsysTrackedObjectsPortGroupName	1.3.6.1.4.1.5624.1.2.79.1.2.7.1.2	SnmpAdminString	read-write	The name of the 'portGroup' tracked object this port is associated with. The tracked object MUST exist in the etsysTrackedObjectsPortGroupTable. An inconsistentValue error is returned if the tracked object does not exist. The empty string indicates this port is not associated with a 'portGroup' tracked object.
ROW etsysTrackedObjectsPortGroupStatus	1.3.6.1.4.1.5624.1.2.79.1.2.6.1.3	RowStatus	read-create	This object permits management of the table by facilitating actions such as row creation and deletion. Creation and activation of a conceptual row in this table MUST be performed as a single operation by setting this object to createAndGo(4). Suspension of an active conceptual row is not supported. Consequently, setting this object to createAndWait(5) or notInService(2) SHALL fail.
etsysTrackedObjectsPortGroupTable	1.3.6.1.4.1.5624.1.2.79.1.2.6		not-accessible	This table provides the configuration parameters pertaining to a 'portGroup' tracked object. An entry created via this table will have a corresponding entry in the etsysTrackedObjectsCommonTable, which contains objects that are modifiable after row creation.
etsysTrackedObjectsPortGroupThresh	1.3.6.1.4.1.5624.1.2.79.2.1.8			This group defines the threshold parameters for tracking port groups.
G32 etsysTrackedObjectsPortGroupUpCount	1.3.6.1.4.1.5624.1.2.79.1.2.6.1.4	Gauge32	read-only	The number of ports in the 'portGroup' that are up.
U32 etsysTrackedObjectsPortGroupUpThresh	1.3.6.1.4.1.5624.1.2.79.1.2.6.1.6	Unsigned32	read-create	The threshold used to determine when to set the tracked object's etsysTrackedObjectsCommonState to 'up'. If the value of etsysTrackedObjectsPortGroupUpCount is greater than or equal to this value, the etsysTrackedObjectsCommonState for this tracked object is set to 'up'. This value MUST be greater than the value specified in etsysTrackedObjectsPortGroupDownThresh. An inconsistentValue error is returned if the value of a set operation is less than or equal to etsysTrackedObjectsPortGroupDownThresh.
NUM etsysTrackedObjectsPortIfIndex	1.3.6.1.4.1.5624.1.2.79.1.2.7.1.1	InterfaceIndex	not-accessible	The MIB-II ifIndex of the port.
etsysTrackedObjectsPortIfSpeedEntry	1.3.6.1.4.1.5624.1.2.79.1.2.9.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsPortIfSpeedTable.
etsysTrackedObjectsPortIfSpeedGroup	1.3.6.1.4.1.5624.1.2.79.2.1.10			This group defines the threshold parameters for tracking port if speed.
G32 etsysTrackedObjectsPortIfSpeedHigh	1.3.6.1.4.1.5624.1.2.79.1.2.9.1.4	Gauge32	read-only	The highest interface speed among the ports associated with this tracked object.
G32 etsysTrackedObjectsPortIfSpeedLow	1.3.6.1.4.1.5624.1.2.79.1.2.9.1.3	Gauge32	read-only	The lowest interface speed among the ports associated with this tracked object.
G32 etsysTrackedObjectsPortIfSpeedMemberCount	1.3.6.1.4.1.5624.1.2.79.1.2.9.1.2	Gauge32	read-only	The number of ports that are members of this 'portIfSpeed' group.
U32 etsysTrackedObjectsPortIfSpeedMemberMax	1.3.6.1.4.1.5624.1.2.79.1.2.9.1.1	Unsigned32	read-only	The maximum number of ports that may be members of this 'portIfSpeed' group.
STR etsysTrackedObjectsPortIfSpeedName	1.3.6.1.4.1.5624.1.2.79.1.2.7.1.4	SnmpAdminString	read-write	The name of the 'portIfSpeed' tracked object this port is associated with. The tracked object MUST exist in the etsysTrackedObjectsPortIfSpeedTable. An inconsistentValue error is returned if the tracked object does not exist. The empty string indicates this port is not associated with a 'portIfSpeed' tracked object.
ROW etsysTrackedObjectsPortIfSpeedStatus	1.3.6.1.4.1.5624.1.2.79.1.2.9.1.5	RowStatus	read-create	This object permits management of the table by facilitating actions such as row creation and deletion. Creation and activation of a conceptual row in this table MUST be performed as a single operation by setting this object to createAndGo(4). Suspension of an active conceptual row is not supported. Consequently, setting this object to createAndWait(5) or notInService(2) SHALL fail.
etsysTrackedObjectsPortIfSpeedTable	1.3.6.1.4.1.5624.1.2.79.1.2.9		not-accessible	This table provides the configuration parameters pertaining to a 'portIfSpeed' tracked object. An entry created via this table will have a corresponding entry in the etsysTrackedObjectsCommonTable, which contains objects that are modifiable after row creation.
INT etsysTrackedObjectsPortState	1.3.6.1.4.1.5624.1.2.79.1.2.7.1.3	INTEGER	read-only	The systems interpretation of the operational status of the port. up(1) - The state when the port is operationally up. down(2) - The state when the port has any other operational status other than 'up'. testing(3) - The state when the system is retrieving the status of the port. notTracked(4) - The state when etsysTrackedObjectsPortGroupName has its default value.
etsysTrackedObjectsPortTable	1.3.6.1.4.1.5624.1.2.79.1.2.7		not-accessible	This table provides the ability to associate a port that has a MIB-II ifIndex to a 'portGroup' and 'portIfSpeed' tracked object. The tracked objects MUST exist prior to assigning the association.
STR etsysTrackedObjectsProbeAcvClose	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.5	SnmpAdminString	read-create	The string that is sent prior to closing the connection to the remote service. This string is used to help the remote service close/cleanup its side of connection. This object MAY NOT be set when etsysTrackedObjectsProbeType is either 'icmp' or 'icmpTs'.
U32 etsysTrackedObjectsProbeAcvDepth	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.8	Unsigned32	read-create	The search depth at which to stop looking for the etsysTrackedObjectsProbeAcvReply within an ACV response. A successful match may stop prior to this search depth, but an unsuccessful match will not (unless the response from the server contains fewer characters than the specified search depth). This object MAY NOT be set when etsysTrackedObjectsProbeType is either 'icmp' or 'icmpTs'.
STR etsysTrackedObjectsProbeAcvReply	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.6	SnmpAdminString	read-create	The string that must be found within the response to an ACV request in order for the transaction to be successful. The entire string must be found prior to exceeding the ACV search depth (etsysTrackedObjectsProbeAcvDepth). This object MAY NOT be set when etsysTrackedObjectsProbeType is either 'icmp' or 'icmpTs'.
STR etsysTrackedObjectsProbeAcvRequest	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.7	SnmpAdminString	read-create	The string that is sent to the remote host after a connection is established with the specified service. An ACV transaction will fail if an ACV request is sent and the ACV reply string (etsysTrackedObjectsProbeAcvReply) is not set. This object MAY NOT be set when etsysTrackedObjectsProbeType is either 'icmp' or 'icmpTs'.
T/F etsysTrackedObjectsProbeDefault	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.3	TruthValue	read-only	Identifies whether this row entry is a default probe created by the system. A 'true' value indicates the system created the row entry, otherwise the value is 'false'. If the value of this object is 'true', the entry is read-only. Any attempt to modify the objects within this table results in the operation failing with a badValue error.
STR etsysTrackedObjectsProbeDescription	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.16	SnmpAdminString	read-create	A user provided description of this entry.
etsysTrackedObjectsProbeEntry	1.3.6.1.4.1.5624.1.2.79.1.2.1.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsProbeTable.
U32 etsysTrackedObjectsProbeFdCount	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.9	Unsigned32	read-create	The fail-detect count. This is the number of consecutive attempts that MUST fail prior to marking a session's state object, etsysTrackedObjectsSessionState, as 'down'.
U32 etsysTrackedObjectsProbeFdInterval	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.10	Unsigned32	read-create	The fail-detect interval. The number of seconds between attempts while any associated session's state object, etsysTrackedObjectsSessionState, is 'up'.
etsysTrackedObjectsProbeGroup	1.3.6.1.4.1.5624.1.2.79.2.1.2			This group defines the attributes and configuration parameters for probe objects.
U32 etsysTrackedObjectsProbeIndex	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.2	Unsigned32	read-only	A unique value assigned by the system for referencing this entry within other tables that have memory restrictions.
T/F etsysTrackedObjectsProbeInservice	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.15	TruthValue	read-create	A toggle mechanism that allows probe sessions to be put into service and taken out of service. Only the session entries in the etsysTrackedObjectsSessionTable that reference this probe are affected. Probe sessions are inservice when the value of this object is set to 'true'. In this case, those sessions MUST be scheduled to determine the status of the remote service. Probe sessions are not-inservice when the value of this object is set to 'false'. In this case, the sessions MUST NOT be scheduled.
STR etsysTrackedObjectsProbeName	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.1	SnmpAdminString	not-accessible	The name given to this probe.
U32 etsysTrackedObjectsProbeOpen	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.13	Unsigned32	read-create	The amount of time to wait for the TCP 3-way handshake to complete. This object is only relevant when etsysTrackedObjectsProbeType is 'tcp'.
U32 etsysTrackedObjectsProbePdCount	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.11	Unsigned32	read-create	The pass-detect count. This is the number of consecutive attempts that MUST pass prior to marking a session's state object, etsysTrackedObjectsSessionState, as 'up'.
U32 etsysTrackedObjectsProbePdInterval	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.12	Unsigned32	read-create	The pass-detect interval. The number of seconds between attempts while any associated session's state object, etsysTrackedObjectsSessionState, is 'down'.
U32 etsysTrackedObjectsProbeReceive	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.14	Unsigned32	read-create	The amount of time to wait for a response to come back from the remote service.
ROW etsysTrackedObjectsProbeStatus	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.17	RowStatus	read-create	This object permits management of the table by facilitating actions such as row creation and deletion. Creation and activation of a conceptual row in this table MUST be performed as a single operation by setting this object to createAndGo(4). Suspension of an active conceptual row is not supported. Consequently, setting this object to createAndWait(5) or notInService(2) SHALL fail.
G32 etsysTrackedObjectsProbesUsed	1.3.6.1.4.1.5624.1.2.79.1.1.4	Gauge32	read-only	The current number of probes that are configured.
etsysTrackedObjectsProbeTable	1.3.6.1.4.1.5624.1.2.79.1.2.1		not-accessible	This table provides the configuration parameters and attributes pertaining to probes. Client applications use probes to determine the status of remote services, such as HTTP servers.
etsysTrackedObjectsProbeTsEntry	1.3.6.1.4.1.5624.1.2.79.1.2.8.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsProbeTsEntry.
etsysTrackedObjectsProbeTsGroup	1.3.6.1.4.1.5624.1.2.79.2.1.9			This group defines the probe timestamp configuration parameters.
U32 etsysTrackedObjectsProbeTsInterval	1.3.6.1.4.1.5624.1.2.79.1.2.8.1.1	Unsigned32	read-write	The interval used for entries retrieving the timestamp data. This is the number of milliseconds between attempts. The value MUST be expressed in increments of 100. This value MUST be greater than etsysTrackedObjectsProbeTsRecvWait. A badValue error is returned if the value of a set operation is not an increment of 100. An inconsistentValue error is returned if the value of a set operation would make this value less than or equal to etsysTrackedObjectsProbeTsRecvWait.
U32 etsysTrackedObjectsProbeTsPCP	1.3.6.1.4.1.5624.1.2.79.1.2.8.1.4	Unsigned32	read-write	The priority code point value to use in the VLAN header when transmitting packets for timestamp data. The value of the PCP is not checked for accuracy.
U32 etsysTrackedObjectsProbeTsRecvWait	1.3.6.1.4.1.5624.1.2.79.1.2.8.1.2	Unsigned32	read-write	The amount of time to wait for a response. This value MUST be less than etsysTrackedObjectsProbeTsInterval. An inconsistentValue error is returned if the value of a set operation would make this value greater than or equal to etsysTrackedObjectsProbeTsInterval.
etsysTrackedObjectsProbeTsTable	1.3.6.1.4.1.5624.1.2.79.1.2.8		not-accessible	This table provides the configuration parameters for probes of type 'icmpTs'. Probes of this type collect timestamp information for the client applications.
U32 etsysTrackedObjectsProbeTsTOS	1.3.6.1.4.1.5624.1.2.79.1.2.8.1.3	Unsigned32	read-write	The type-of-service value to use in the IP header when transmitting packets for timestamp data. The value of the TOS is not checked for accuracy.
INT etsysTrackedObjectsProbeType	1.3.6.1.4.1.5624.1.2.79.1.2.1.1.4	INTEGER	read-create	The type of connection used when contacting the remote service. icmp(1) - Issues an ICMP echo request and expects an echo reply from the remote service. Probes of this type determine the state of the remote service. udp(2) - Sends a UDP request using either the etsysTrackedObjectsProbeAcvRequest string or a generic '\r\n'. If its an ACV request, the system expects an ACV reply. If its a generic request, no reply is expected. Probes of this type determine the state of the remote service. tcp(3) - Sets up a 3-way handshake with the remote service. If etsysTrackedObjectsProbeAcvRequest is configured, that string is sent over the connected socket, and an ACV reply is expected. If that object is not configured, then the connection is closed. Probes of this type determine the state of the remote service. icmpTs(4) - Issues an ICMP echo request and expects an echo reply. The echo request contains a timestamp of the transmit time. The echo reply includes the timestamp of the received echo request and the transmit timestamp of the echo reply. Upon receiving the echo reply, the application adds a final timestamp for the receive time. Hosts: L - Local Host, D - Destination Host Timestamps: ETxTs - Echo Request Transmit Timestamp ERxTs - Echo Request Receive Timestamp RTxTs - Echo Reply Transmit Timestamp RRxTs - Echo Reply Receive Timestamp L ----- Echo Request (ETxTs) --------------> D L <---- Echo Reply (ETxTs, ERxTs, RTxTs)---- D L (Adds RRxTs) Notes: In order for the echo reply to contain the extra timestamps, the destinaton host MUST be an Enterasys device that supports the 'icmpTs' type. However, it is not a requirement that the destination host be an Enterasys device, nor does an Enterasys device have to support the 'icmpTs' type for the probe to operate correctly. In this situation, the client applications will have to handle the ERxTs and RTxTs values being zero. Probes of this type collect timestamp information for the client applications. These probes DO NOT determine the state of the remote service. Additional objects are found in the etsysTrackedObjectsProbeTsTable. The value of this object MAY NOT be modified after creating the row.
IP etsysTrackedObjectsRoute	1.3.6.1.4.1.5624.1.2.79.1.2.5.1.3	InetAddress	read-create	The address of the route that is monitored by this tracked object. The value of this object MUST be set while creating the row and it MAY NOT be modified afterwards.
etsysTrackedObjectsRouteEntry	1.3.6.1.4.1.5624.1.2.79.1.2.5.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsRouteTable.
etsysTrackedObjectsRouteGroup	1.3.6.1.4.1.5624.1.2.79.2.1.6			This group defines the configuration parameters for tracking IP routes.
U32 etsysTrackedObjectsRouteMetricDownThresh	1.3.6.1.4.1.5624.1.2.79.1.2.5.1.6	Unsigned32	read-create	The threshold value the route metric MUST reach in order for the tracked object to transition to the 'down' state from the 'up' state. This value MUST be greater than the value specified in etsysTrackedObjectsRouteMetricUpThresh. An inconsistentValue error is returned if the value of a set operation is less than or equal to etsysTrackedObjectsRouteMetricUpThresh. This value only has meaning when etsysTrackedObjectsRouteOption is 'metric'.
U32 etsysTrackedObjectsRouteMetricUpThresh	1.3.6.1.4.1.5624.1.2.79.1.2.5.1.5	Unsigned32	read-create	The threshold value the route metric MUST reach in order for the tracked object to transition to the 'up' state from the 'down' state. This value MUST be less than the value specified in etsysTrackedObjectsRouteMetricDownThresh. An inconsistentValue error is returned if the value of a set operation is greater than or equal to etsysTrackedObjectsRouteMetricDownThresh. This value only has meaning when etsysTrackedObjectsRouteOption is 'metric'.
INT etsysTrackedObjectsRouteOption	1.3.6.1.4.1.5624.1.2.79.1.2.5.1.4	INTEGER	read-create	Dictates what to monitor in relation to the address. reachability(1) - Tracks the status of the route within the FIB. metric(2) - Uses metric thresholds to determine the status of the route. The value of this object MAY NOT be modified after creating the row.
ADR etsysTrackedObjectsRoutePrefix	1.3.6.1.4.1.5624.1.2.79.1.2.5.1.2	InetAddressPrefixLength	read-create	The address mask of etsysTrackedObjectsRoute. The value of this object MUST be set while creating the row and it MAY NOT be modified afterwards.
ROW etsysTrackedObjectsRouteStatus	1.3.6.1.4.1.5624.1.2.79.1.2.5.1.7	RowStatus	read-create	This object permits management of the table by facilitating actions such as row creation and deletion. Creation and activation of a conceptual row in this table MUST be performed as a single operation by setting this object to createAndGo(4). Suspension of an active conceptual row is not supported. Consequently, setting this object to createAndWait(5) or notInService(2) SHALL fail.
etsysTrackedObjectsRouteTable	1.3.6.1.4.1.5624.1.2.79.1.2.5		not-accessible	This table provides the configuration parameters pertaining to local route tracked objects, such as routes in the FIB. The objects in this table cannot be modified after row creation with the exception of the RowStatus and metric thresholds object. An entry created via this table will have a corresponding entry in the etsysTrackedObjectsCommonTable, which contains objects that are modifiable after row creation.
IPt etsysTrackedObjectsRouteType	1.3.6.1.4.1.5624.1.2.79.1.2.5.1.1	InetAddressType	read-create	The address family of this tracked object entry. This object dictates the valid input for the etsysTrackedObjectsRoutePrefix and etsysTrackedObjectsRoute objects. The value of this object MAY NOT be modified after creating the row.
IP etsysTrackedObjectsSessionAddr	1.3.6.1.4.1.5624.1.2.79.1.2.2.1.2	InetAddress	not-accessible	The destination address of the object to monitor.
etsysTrackedObjectsSessionEntry	1.3.6.1.4.1.5624.1.2.79.1.2.2.1		not-accessible	An entry (conceptual row) in the etsysTrackedObjectsSessionTable.
etsysTrackedObjectsSessionGroup	1.3.6.1.4.1.5624.1.2.79.2.1.3			This group defines the session information, created by client applications.
TIK etsysTrackedObjectsSessionLastChange	1.3.6.1.4.1.5624.1.2.79.1.2.2.1.6	TimeTicks	read-only	The sysUpTime at which the etsysTrackedObjectsSessionState was last modified.
INE etsysTrackedObjectsSessionPort	1.3.6.1.4.1.5624.1.2.79.1.2.2.1.3	InetPortNumber	not-accessible	The port number of the service being monitored.
INT etsysTrackedObjectsSessionState	1.3.6.1.4.1.5624.1.2.79.1.2.2.1.4	INTEGER	read-only	The current state of the session. up(1) - The service on the remote session is up. The session has passed the criteria specified in the corresponding probe. down(2) - The service on the remote session is down. The session has not passed the criteria specified in the corresponding probe. pending(3) - The system is in the process of determining the initial state of the session. disabled(4) - The corresponding probe has been taken out of service (etsysTrackedObjectsProbeInservice has been set to 'false'). collect(5) - The system is actively collecting timestamp data to pass along to the client applications. Only the sessions whose corresponding probe type is 'icmpTs' (etsysTrackedObjectsProbeType) may be in this state.
C32 etsysTrackedObjectsSessionStateChangesEx	1.3.6.1.4.1.5624.1.2.79.1.2.2.1.5	Counter32	read-only	The number of times the etsysTrackedObjectsSessionState object has changed state.
G32 etsysTrackedObjectsSessionsUsed	1.3.6.1.4.1.5624.1.2.79.1.1.8	Gauge32	read-only	The current number of probe sessions that are currently used by Enterasys client applications.
etsysTrackedObjectsSessionTable	1.3.6.1.4.1.5624.1.2.79.1.2.2		not-accessible	This table provides the information pertaining to individual probe sessions. Sessions are derived from probes and require a destination IP address and port number. Sessions determine whether a remote service is up or down. Session are created by client applications that wish to monitor the state of a remote service. The number and size of objects in this table SHOULD be minimized in order to provide the scalability needed to support a lot of entries.
IPt etsysTrackedObjectsSessionType	1.3.6.1.4.1.5624.1.2.79.1.2.2.1.1	InetAddressType	not-accessible	The address family of the data contained in etsysTrackedObjectsSessionAddr.
etsysTrackedObjectsTables	1.3.6.1.4.1.5624.1.2.79.1.2

RFC description

Defines tracked objects functionality for configuring ICMP probes and monitoring network performance metrics.

Start monitoring Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (IP SLA-style tracked object probes) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ENTERASYS-TRACKED-OBJECTS-MIB