ENTERASYS-R2MGMT-MIB

All MIBs › ENTERASYS-R2MGMT-MIB

Organization: Enterasys Networks, Inc

Last Updated: 2004-07-08

Category: Technology: Wireless, Vendor: Enterasys/Cabletron

Description: Enterasys Networks proprietary MIB for managing the RoamAbout R2 Wireless Access Platform configuration and status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ENTERASYS-R2MGMT-MIB?

ENTERASYS-R2MGMT-MIB is an Enterasys Networks proprietary SNMP module intended for managing the RoamAbout R2 Wireless Access Platform, an early Enterasys/Cabletron wireless access point product line. Based on the available module structure, it defines only a conformance branch (etsysR2MgmtConformance) describing which objects and groups an agent must implement, rather than exposing directly observable runtime data in the sampled objects. In general, MIBs of this type are intended to support monitoring of wireless AP configuration and operational status such as radio settings, associated client counts, or system status, but the specific runtime objects are not present in this data sample. No indication of dependency on other MIBs is apparent from the available data. This module would typically be deployed in legacy Enterasys/Cabletron RoamAbout wireless deployments for centralized SNMP-based AP management. Engineers can download the ENTERASYS-R2MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ENTERASYS-R2MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Enterasys RoamAbout R2 Wireless Access Points

Monitoring Examples

The only object visible in the provided data, etsysR2MgmtConformance, is a conformance-group placeholder used to declare which objects and groups a compliant SNMP agent must support -- it does not itself represent pollable runtime data. No concrete monitoring scenario can be honestly constructed from the sample objects given, since no data/status tables are included in this excerpt.

Imported Objects

From ENTERASYS-MIB-NAMES

etsysModules

OBJECT-IDENTITY

From P-BRIDGE-MIB

EnabledStatus

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

TruthValue

How to Use in IPNetwork Monitor

Example using etsysR2MgmtPowerups OID:

Select an Enterasys RoamAbout R2 Wireless Access Point (legacy Cabletron) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type etsysR2MgmtPowerups into the Find box to locate it in the OID tree, then select it and click OK. It reports pERSISTENT: The number of times this device was powered on. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
enterasysR2MgmtMIB	1.3.6.1.4.1.5624.1.2.11			The Enterasys Networks Proprietary MIB module for entities implementing objects specific to the RoamAbout R2 Wireless Access Platform.
etsysR2MgmtObjects	1.3.6.1.4.1.5624.1.2.11.1
etsysR2MgmtParams	1.3.6.1.4.1.5624.1.2.11.1.1
I32 etsysR2MgmtMemorySize	1.3.6.1.4.1.5624.1.2.11.1.1.1	Integer32	read-only	The size of the memory in the Access Point in Mbytes.
ENA etsysR2MgmtWEBInterface	1.3.6.1.4.1.5624.1.2.11.1.1.2	EnabledStatus	read-write	Determines whether or not WEB Management is enabled or disabled.
ENA etsysR2MgmtTelnetInterface	1.3.6.1.4.1.5624.1.2.11.1.1.3	EnabledStatus	read-write	Determines whether or not Telnet Management is enabled or disabled.
INT etsysR2MgmtVlan	1.3.6.1.4.1.5624.1.2.11.1.1.4	INTEGER	read-write	When non-zero this object specifies the management VLAN. This is the VLAN that remote management entities must use to communicate with this switch. Zero is a special value that specifies the default behavior, e.g., management on VLAN 1.
etsysR2MgmtCounters	1.3.6.1.4.1.5624.1.2.11.1.2
C32 etsysR2MgmtPowerupsEx	1.3.6.1.4.1.5624.1.2.11.1.2.1	Counter32	read-only	PERSISTENT: The number of times this device was powered on. Power Ups, Management Resets and Unsolicited Resets are all mutually exclusive.
C32 etsysR2MgmtResets	1.3.6.1.4.1.5624.1.2.11.1.2.2	Counter32	read-only	PERSISTENT: Number of times the device was initialized with a management command. Power Ups, Management Resets and Unsolicited Resets are all mutually exclusive.
C32 etsysR2MgmtUnsolicitedResets	1.3.6.1.4.1.5624.1.2.11.1.2.3	Counter32	read-only	PERSISTENT: Number of times the device initialized itself after encountering a fatal error. Power Ups, Management Resets & Unsolicited Resets are all mutually exclusive.
etsysR2MgmtErrorLog	1.3.6.1.4.1.5624.1.2.11.1.3
INT etsysR2MgmtErrLogNumEntries	1.3.6.1.4.1.5624.1.2.11.1.3.1	INTEGER	read-only	PERSISTENT: The number of entries in the etsysR2MgmtErrLogTable. The value of this object is initially zero. It is incremented as etsysR2MgmtErrLogEntries are added, to a maximum value. The maximum value is implementation specific.
etsysR2MgmtErrLogTable	1.3.6.1.4.1.5624.1.2.11.1.3.2		not-accessible	A table which describes errors encountered by the system.
etsysR2MgmtErrLogEntry	1.3.6.1.4.1.5624.1.2.11.1.3.2.1		not-accessible	A list of errors logged by the system.
INT etsysR2MgmtErrLogIndex	1.3.6.1.4.1.5624.1.2.11.1.3.2.1.1	INTEGER	read-only	PERSISTENT: The value of this object uniquely identifies an entry in the etsysR2MgmtErrLogTable.
TIK etsysR2MgmtErrLogTimeStamp	1.3.6.1.4.1.5624.1.2.11.1.3.2.1.2	TimeTicks	read-only	PERSISTENT: The value of sysUpTime at the time in which the error is logged.
INT etsysR2MgmtErrLogResetNumber	1.3.6.1.4.1.5624.1.2.11.1.3.2.1.3	INTEGER	read-only	PERSISTENT: The number of resets which have occurred at the time in which the error is logged. (This is the sum of etsysR2MgmtPowerups, etsysR2MgmtMgmtResets, and etsysR2MgmtUnsolicitedResets.)
STR etsysR2MgmtErrLogInfo	1.3.6.1.4.1.5624.1.2.11.1.3.2.1.4	SnmpAdminString	read-only	PERSISTENT: A textual description of the error being logged.
etsysR2MgmtLoader	1.3.6.1.4.1.5624.1.2.11.1.4
T/F etsysR2MgmtCrashUploadUseBootp	1.3.6.1.4.1.5624.1.2.11.1.4.1	TruthValue	read-write	DURABLE: Controls where the AccessPoint gets the information that it needs to upload crash dumps. When true(1), indicates that the AP should use the BootP protocol to auto-configure parameters such as its own IP address, gateway IP, subnet, TFTP server IP address, and directory name. When false(2), indicates that the AccessPoint should use locally-configured parameters stored in NVRAM.
IP etsysR2MgmtCrashUploadServerIP	1.3.6.1.4.1.5624.1.2.11.1.4.2	IpAddress	read-write	DURABLE: The IP address of the TFTP server that should be used for crash dump uploads. This value will be ignored when 'etsysR2MgmtCrashUploadUseBootp' is 'false(2)'.
OCT etsysR2MgmtCrashUploadDirectory	1.3.6.1.4.1.5624.1.2.11.1.4.3	OCTET STRING	read-write	DURABLE: The name of the remote directory to which all crash dumps should be uploaded. This value will be ignored when 'etsysR2MgmtCrashUploadUseBootp' is 'false(2)'.
ENA etsysR2MgmtUplineDumpMode	1.3.6.1.4.1.5624.1.2.11.1.4.4	EnabledStatus	read-write	Determines whether or not a dump file is created on an Access Point crash.
etsysR2MgmtConformance	1.3.6.1.4.1.5624.1.2.11.2
etsysR2MgmtGroups	1.3.6.1.4.1.5624.1.2.11.2.1
etsysR2MgmtBaseGroup	1.3.6.1.4.1.5624.1.2.11.2.1.1			The basic etsysR2Mgmt objects.
etsysR2MgmtCountersGroup	1.3.6.1.4.1.5624.1.2.11.2.1.2			The Counters objects.
etsysR2MgmtErrLogGroup	1.3.6.1.4.1.5624.1.2.11.2.1.3			The error logging objects.
etsysR2MgmtLoaderGroup	1.3.6.1.4.1.5624.1.2.11.2.1.4			The Crash Upload objects.
etsysR2MgmtBaseGroupV2	1.3.6.1.4.1.5624.1.2.11.2.1.5			The basic etsysR2Mgmt objects.
etsysR2MgmtCompliances	1.3.6.1.4.1.5624.1.2.11.2.2
etsysR2MgmtCompliance	1.3.6.1.4.1.5624.1.2.11.2.2.1			The compliance statement for devices that support Extended Switch.
etsysR2MgmtComplianceV2	1.3.6.1.4.1.5624.1.2.11.2.2.2			The compliance statement for devices that support Extended Switch.

RFC description

Manages Enterasys RoamAbout R2 wireless access platform configuration, including memory, web interface, and management VLAN settings.

Start monitoring Enterasys RoamAbout R2 Wireless Access Point (legacy Cabletron) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ENTERASYS-R2MGMT-MIB

What Is ENTERASYS-R2MGMT-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description