ENTERASYS-STATION-LOCATION-MIB

All MIBs › ENTERASYS-STATION-LOCATION-MIB

Organization: Extreme Networks

Last Updated: 2016-05-11

Category: Technology: Wireless, Vendor: Enterasys/Cabletron

Description: Extreme/Enterasys Networks MIB for managing wireless station location tracking and localization application configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ENTERASYS-STATION-LOCATION-MIB?

ENTERASYS-STATION-LOCATION-MIB is an Enterasys/Extreme Networks MIB for managing the wireless station location/localization application used with wireless controllers to estimate the physical position of associated or tracked Wi-Fi stations. It exposes configuration objects for the location engine (enable state, auto-tracking, global AP height assumption) and a floor table describing building floors, including floor identifiers, names, and the number of access points assigned to each floor. Its monitoring focus is software-feature status rather than hardware health: whether the location engine is enabled and running, and how the floor plan configuration used for triangulation is structured. It has no explicit dependency on another standard MIB, functioning as a self-contained application-configuration module layered on top of the vendor's wireless controller and AP MIBs. It is deployed in enterprise wireless deployments needing real-time or historical asset/station location tracking, such as large campuses or warehouses. Engineers can download the ENTERASYS-STATION-LOCATION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ENTERASYS-STATION-LOCATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Enterasys/Extreme Networks wireless controllers and access points

Monitoring Examples

An admin would check etsysLocationEngineEnable and etsysLocationEngineAutoTrkEnable to confirm the location engine and automatic tracking are running, then walk etsysFloorTable/etsysFloorEntry to verify each etsysFloorName has the expected etsysFloorNumberOfAPs for accurate triangulation. If etsysLocationFloorConfigured is below etsysLocationMaxFloorLimit but the actual site has more floors, that would reveal an incomplete localization deployment.

What Can Be Monitored

location engine enable state
auto-tracking status
configured floor count vs. limit
APs assigned per floor
global AP height setting

Imported Objects

From ENTERASYS-MIB-NAMES

etsysModules

OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
etsysStationLocationMIB	1.3.6.1.4.1.5624.1.2.98			This MIB provides an interface to manage the wireless station localization application. It allows configuration of the application as well retrieving information about location of managed Station that are associated to controller or are configured to be tracked even without being associated.
etsysStationLocationMIBObjects	1.3.6.1.4.1.5624.1.2.98.1
etsysLocationConfiguration	1.3.6.1.4.1.5624.1.2.98.1.1
T/F etsysLocationEngineEnable	1.3.6.1.4.1.5624.1.2.98.1.1.1	TruthValue	read-write	Setting this value to true (1), enables the location engine to track stations, otherwise no station will be tracked.
T/F etsysLocationEngineAutoTrkEnable	1.3.6.1.4.1.5624.1.2.98.1.1.2	TruthValue	read-write	If this variable is set to true and etsysLocationEngineEnable is set to true then all associated stations will be tracked up to the platform limit for location tracking.
U32 etsysLocationEngineGlblAPHeight	1.3.6.1.4.1.5624.1.2.98.1.1.3	Unsigned32	read-write	Default height of access point to be used if the floor configuration has not provided any height for any AP servicing the floor. The range of height is 0 to 1000 in centimeters.
FLO etsysLocationEngineGlobalEnv	1.3.6.1.4.1.5624.1.2.98.1.1.4	FloorEnvironmentType	read-write	Type of indoor construction materials assumed when the floor plan does not specify the primary construction materials used on its floor.
etsysLocationFloors	1.3.6.1.4.1.5624.1.2.98.1.1.5
U32 etsysLocationMaxFloorLimit	1.3.6.1.4.1.5624.1.2.98.1.1.5.1	Unsigned32	read-only	The maximum number of floor plan files that can be stored and used on this controller.
U32 etsysLocationFloorConfigured	1.3.6.1.4.1.5624.1.2.98.1.1.5.2	Unsigned32	read-only	The number of floors that have been configured and currently used.
etsysFloorTable	1.3.6.1.4.1.5624.1.2.98.1.1.5.3		not-accessible	A table that describes attributes of floors configured for use by the Location Engine.
etsysFloorEntry	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1		not-accessible	An entry describing a single floor in the location engine's database.
U32 etsysFloorID	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.1	Unsigned32	not-accessible	Floor ID associated to the floor. This index ranges from one to etsysLocationMaxFloorLimit. This ID persists over reboots and upgrades.
ROW etsysFloorRowStatus	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.2	RowStatus	read-create	RowStatus of the entry, though currently only deletion is allowed for this field.
STR etsysFloorName	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.3	SnmpAdminString	read-create	Textual string identifying floor name. Supports UTF-8 character set, except Double Quotes and ASCII control characters.
U32 etsysFloorNumberOfAPs	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.4	Unsigned32	read-create	Number of access point have been assigned to this floor to track stations on this floor.
U32 etsysFloorWidth	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.5	Unsigned32	read-create	Width of the floor in centimeters.
U32 etsysFloorLength	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.6	Unsigned32	read-create	Length of the floor in centimeters.
U32 etsysFloorNumberOfCells	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.7	Unsigned32	read-create	Number of cells on this floor.
U32 etsysFloorCellWidth	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.8	Unsigned32	read-create	Width of each cell for this floor in centimeters.
U32 etsysFloorCellLength	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.9	Unsigned32	read-create	Length of each cell for this floor in centimeters.
FLO etsysFloorEnvironment	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.10	FloorEnvironmentType	read-create	Type of propagation model for the floor.
OCT etsysFloorHashString	1.3.6.1.4.1.5624.1.2.98.1.1.5.3.1.11	OCTET STRING	read-create	MD5 hash of the file as received during download.
etsysLocationStations	1.3.6.1.4.1.5624.1.2.98.1.1.6
U32 etsysMaxTrackedStationLimit	1.3.6.1.4.1.5624.1.2.98.1.1.6.1	Unsigned32	read-only	Maximum number of stations that this platform can track. Stations are tracked on the basis of either being associated to the controller or administratively added to the 'On-Demand Tracking' list
U32 etsysMaxOnDemandStationLimit	1.3.6.1.4.1.5624.1.2.98.1.1.6.2	Unsigned32	read-only	Maximum number of stations that can be configured to be tracked as on-demand basis.
etsysOnDemandStationTable	1.3.6.1.4.1.5624.1.2.98.1.1.6.3		not-accessible	A list of stations to be tracked by the Location Engine. Location tracking of a station may stop when it is removed from the list. The list is configured by the administrator and is used to reserve capacity to ensure that the addresses in the list are among those tracked by the location engine.
etsysOnDemandStationEntry	1.3.6.1.4.1.5624.1.2.98.1.1.6.3.1		not-accessible	The address of a single station to be tracked.
MAC etsysOnDemandStationMAC	1.3.6.1.4.1.5624.1.2.98.1.1.6.3.1.1	MacAddress	not-accessible	MAC address of the station to be tracked.
ROW etsysOnDemandStationRowStatus	1.3.6.1.4.1.5624.1.2.98.1.1.6.3.1.2	RowStatus	read-create	RowStatus of the entry.
INT etsysLocationEngineTrackAreaChange	1.3.6.1.4.1.5624.1.2.98.1.1.7	INTEGER	read-write	Setting this value to enable(1), the location engine will track the area changes, otherwise, the area information is determined by the associated AP.
INT etsysLocationEngineTrackMode	1.3.6.1.4.1.5624.1.2.98.1.1.8	INTEGER	read-write	trackClients(1) : All associated stations will be tracked up to the platform limit. trackAll(2) : All Mac address will be tracked up to the platform limit. trackNone(3) : Location engine is tracking the on demand list only.
etsysLocationReports	1.3.6.1.4.1.5624.1.2.98.1.2
etsysTrackedStationTable	1.3.6.1.4.1.5624.1.2.98.1.2.1		not-accessible	Table containing information about tracked stations.
etsysTrackedStationEntry	1.3.6.1.4.1.5624.1.2.98.1.2.1.1		not-accessible	An entry describing the location of one tracked station.
MAC etsysTrackedStationMAC	1.3.6.1.4.1.5624.1.2.98.1.2.1.1.1	MacAddress	not-accessible	MAC address associated to the station that is being tracked.
U32 etsysTrackedStationFloorID	1.3.6.1.4.1.5624.1.2.98.1.2.1.1.2	Unsigned32	read-only	The ID of the floor on which the station appears to be active.
INT etsysTrackedStationLocationType	1.3.6.1.4.1.5624.1.2.98.1.2.1.1.3	INTEGER	read-only	This object identifies the type of location report for the station. The meaning of other fields in this table and the etsysLocationGridTable depend on the value of this object. If this object has a value of 'cellOfOrigin' then etsysStationLocnGridX and etsysStationLocationGridY will be set to -1 in the etsysStationLocationGridTable entry for this station.
STR etsysTrackedStationReportingAPSN	1.3.6.1.4.1.5624.1.2.98.1.2.1.1.6	SnmpAdminString	read-only	The serial number of the access point that reported an RSS value for the station. This object is meaningful only when the value of etsysTrackedStationLocationType is cellOfOrigin. The cell of origin method determines location based on the probable distance of the subject from a known location, in this case, the location of the AP that reported the RSS value. Cell of Origin is used when fewer than three APs report seeing the station at one time. If two APs report the station then the serial number of the AP reporting the strongest RSS is reported as the station's etsysTrackedStationReportingAPSN.
I32 etsysTrackedStationAPDistance	1.3.6.1.4.1.5624.1.2.98.1.2.1.1.7	Integer32	read-only	The distance (in meters) of the station from the access point with the serial number in etsysTrackedStationReportingAPSN. This object is meaningful only when the value of etsysTrackedStationLocationType is cellOfOrigin.
etsysStationLocationGridTable	1.3.6.1.4.1.5624.1.2.98.1.2.2		not-accessible	When the location type is rssBasedLocation it is likely that there will be a number of probable locations calculated for one station. This table lists the most recently rssBasedLocation-calculated probable locations of each tracked station. Each row of the table represents one probable location of one tracked station. The table is indexed by the subject station's MAC address and an internal identifier for the cell described by the entry. The cell is a cell on the floor identified by the etsysTrackedStationFloorID object in the etsysTrackedStationEntry for the subject station.
etsysStationLocationGridEntry	1.3.6.1.4.1.5624.1.2.98.1.2.2.1		not-accessible	One entry in this table providing one of the possible location for the station with associated probability.
U32 etsysStationLocnGridIndex	1.3.6.1.4.1.5624.1.2.98.1.2.2.1.1	Unsigned32	not-accessible	Internally assigned number to those location starting from one to the maximum number of reported locations. This field has no meaning by itself.
I32 etsysStationLocnGridX	1.3.6.1.4.1.5624.1.2.98.1.2.2.1.2	Integer32	read-only	X-coordinate associated to the location of the reported cell.
I32 etsysStationLocnGridY	1.3.6.1.4.1.5624.1.2.98.1.2.2.1.3	Integer32	read-only	Y-coordinate associated to the location of the reported cell.
I32 etsysStationLocnGridProbability	1.3.6.1.4.1.5624.1.2.98.1.2.2.1.4	Integer32	read-only	Estimated percentage chance that the station is actually located in the identified cell. A value of zero means the location is not known.
etsysLocationBatchReport	1.3.6.1.4.1.5624.1.2.98.1.3
T/F etsysLocationBatchReportEnable	1.3.6.1.4.1.5624.1.2.98.1.3.1	TruthValue	read-write	Setting this value to true (1) enables the location batch reporting feature.
U32 etsysLocationBatchReportFrequency	1.3.6.1.4.1.5624.1.2.98.1.3.2	Unsigned32	read-write	The report frequency setting in seconds. Currently 60, 120, 300, 600, 1200, 1800, 3600, 7200 and 14400 seconds are supported. Other values are un-supported and will be rejected.
U32 etsysPublishLocationURLMaxEntries	1.3.6.1.4.1.5624.1.2.98.1.3.3	Unsigned32	read-only	Maximum number of URLs supported by the controller.
U32 etsysPublishLocationURLNumEntries	1.3.6.1.4.1.5624.1.2.98.1.3.4	Unsigned32	read-only	The current number of entries in the etsysPublishLocationURLTable.
etsysPublishLocationURLTable	1.3.6.1.4.1.5624.1.2.98.1.3.5		not-accessible	Table containing destination URLs to which the controller posts location information. Only http and https are supported.
etsysPublishLocationURLEntry	1.3.6.1.4.1.5624.1.2.98.1.3.5.1		not-accessible	An entry describing the destination URL.
U32 etsysPublishLocationIndex	1.3.6.1.4.1.5624.1.2.98.1.3.5.1.1	Unsigned32	not-accessible	The index for a configured destination URL.
OCT etsysPublishLocationURL	1.3.6.1.4.1.5624.1.2.98.1.3.5.1.2	OCTET STRING	read-create	The URL of the destination to which a report is pushed.
ROW etsysPublishLocationRowStatus	1.3.6.1.4.1.5624.1.2.98.1.3.5.1.3	RowStatus	read-create	A control that will allow one entry to be added, activated, deactivated, or removed from the table.
STR etsysPublishLocationUserId	1.3.6.1.4.1.5624.1.2.98.1.3.5.1.4	SnmpAdminString	read-create	The login name for the destination URL server.
STR etsysPublishLocationPassword	1.3.6.1.4.1.5624.1.2.98.1.3.5.1.5	SnmpAdminString	read-create	The password for the destination URL server. On a read, a dummy (not real password) will be returned.
INT etsysLocationBatchReportDimensionUnit	1.3.6.1.4.1.5624.1.2.98.1.3.6	INTEGER	read-write	The units for reported x and y location coordinates.
etsysStationLocationConformance	1.3.6.1.4.1.5624.1.2.98.2
etsysStationLocationGroups	1.3.6.1.4.1.5624.1.2.98.2.1
etsysLocationEngineGlobalGroup	1.3.6.1.4.1.5624.1.2.98.2.1.1			Objects defining configuration attributes of a location tracking components.
etsysFloorGroup	1.3.6.1.4.1.5624.1.2.98.2.1.2			List of objects that defines attributes of a configured floor.
etsysOnDemandStationsGroup	1.3.6.1.4.1.5624.1.2.98.2.1.3			List of objects that define attribute of a on-demand stations to be tracked.
etsysTrackedStationsGroup	1.3.6.1.4.1.5624.1.2.98.2.1.4			List of objects that define a tracked stations attributes.
etsysLocationBatchReportGroup	1.3.6.1.4.1.5624.1.2.98.2.1.5			List of objects that define location batch reporting attributes.
etsysLocationEngineGlobalGroup2	1.3.6.1.4.1.5624.1.2.98.2.1.6			Objects defining configuration attributes of a location tracking components.
etsysLocationEngineGlobalGroup3	1.3.6.1.4.1.5624.1.2.98.2.1.7			Objects defining configuration attributes of a location tracking components.
etsysLocationBatchReportGroup2	1.3.6.1.4.1.5624.1.2.98.2.1.8			List of objects that define location batch reporting attributes.
etsysStationLocationCompliances	1.3.6.1.4.1.5624.1.2.98.2.2
etsysStationLocationCompliance	1.3.6.1.4.1.5624.1.2.98.2.2.1			This group is mandatory for all devices that support reporting and configuration of station location.
etsysStationLocationCompliance2	1.3.6.1.4.1.5624.1.2.98.2.2.2			This group is mandatory for all devices that support reporting and configuration of station location.
etsysStationLocationCompliance3	1.3.6.1.4.1.5624.1.2.98.2.2.3			This group is mandatory for all devices that support reporting and configuration of station location.

RFC description

Extreme Networks wireless station localization MIB for managing station location tracking and location batch reporting for associated and unassociated devices.

Start monitoring Enterasys/Extreme Networks wireless controller and access points (station location tracking) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ENTERASYS-STATION-LOCATION-MIB

What Is ENTERASYS-STATION-LOCATION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description