HPN-ICF-WIPS-MIB

All MIBs › HPN-ICF-WIPS-MIB

Last Updated: 2011-12-29

Category: Domain: Security, Technology: Wireless, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Wireless Intrusion Prevention System (WIPS) rogue AP detection and countermeasure policies on HP/Comware WLAN.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-WIPS-MIB?

This MIB manages the Wireless Intrusion Prevention System (WIPS) feature on HP/Comware wireless LAN infrastructure, providing configuration and status for detecting rogue access points, unauthorized stations, and wireless attacks, and for applying countermeasures such as blocklisting. It belongs to the HP/H3C wireless (WLAN) MIB family and exposes global enable/license state, timing parameters for device aging and reclassification, and reset controls for trust/block/ignore lists. Its monitoring value is in software-level security posture visibility: hpnicfWIPSSensorLicenseNum confirms how many WIPS sensor licenses are active, while hpnicfWIPSAPInactiveTime/hpnicfWIPSSTAInactiveTime and hpnicfWIPSDevAgingTime reveal how the system ages out detected devices, letting an operator verify that rogue-AP and rogue-station detection is tuned appropriately and hasn't silently gone stale. It has no direct dependency on IETF standard MIBs, being a proprietary HP/H3C WLAN security feature. It is deployed on HP/Comware wireless controllers and access points protecting enterprise WLAN environments from rogue devices and wireless attacks. Network engineers evaluating or troubleshooting this functionality can download the HPN-ICF-WIPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-WIPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/Comware wireless LAN controller
HP/Comware access point

Monitoring Examples

An operator would check hpnicfWIPSEnable and hpnicfWIPSSensorLicenseNum to confirm WIPS is active and adequately licensed across the deployed sensors, then review hpnicfWIPSBlocklistAction and hpnicfWIPSStatisticPeriod to understand how aggressively rogue devices are being countered and how often statistics refresh. If hpnicfWIPSAPInactiveTime or hpnicfWIPSSTAInactiveTime is set too long, a rogue AP or station that has actually left the area may remain listed as active, delaying detection of new threats; hpnicfWIPSResetAllBlockList and hpnicfWIPSResetAllTrustList let an administrator clear stale entries to force reclassification.

What Can Be Monitored

WIPS enable status
sensor license count
blocklist action policy
AP/station inactivity aging time
statistics collection period
trust/block/ignore list reset status

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfWIPSChlStatTotalPkt OID:

Select a HP/Comware wireless LAN controller or access point (Wireless Intrusion Prevention System) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfWIPSChlStatTotalPkt into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Represents the count of total frames in the channel. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfWIPS	1.3.6.1.4.1.11.2.14.11.15.2.118			This MIB provides information about WIPS feature. Wireless Intrusion Prevention System (WIPS) WIPS is designed to be employed in an area that is serviced by an existing wireless network. It aids in the early detection of malicious outsider attacks and intrusions via wireless networks, and takes corresponding measures in order to guarantee the wireless environment security.
hpnicfWIPSConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.1
hpnicfWIPSGlobalConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1
T/F hpnicfWIPSEnable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.1	TruthValue	read-write	Represents whether the WIPS feature is enabled or not. 'true': enable the WIPS feature. 'false': disable the WIPS feature.
U32 hpnicfWIPSSensorLicenseNum	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.2	Unsigned32	read-only	Represents the number of sensor license.
INT hpnicfWIPSBlocklistAction	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.3	INTEGER	read-write	Represents whether the block list feature is enabled or not. 'block' : Enable the block list feature to filter unwanted devices. 'unblock' : Disable the block list feature.
I32 hpnicfWIPSAPInactiveTime	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.4	Integer32	read-write	Represents the time for AP getting inactive.
I32 hpnicfWIPSSTAInactiveTime	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.5	Integer32	read-write	Represents the time for STA getting inactive.
I32 hpnicfWIPSDevAgingTime	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.6	Integer32	read-write	Represents the time for device getting aged.
I32 hpnicfWIPSStatisticPeriod	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.7	Integer32	read-write	Represents the period of WIPS reporting the statistic.
I32 hpnicfWIPSReclassificationPeriod	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.8	Integer32	read-write	Represents the period of WIPS reclassifying devices.
T/F hpnicfWIPSResetAllTrustList	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.9	TruthValue	read-write	This object is used to remove all entries from the static trust list. It will return false for get operation.
T/F hpnicfWIPSResetAllBlockList	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.10	TruthValue	read-write	This object is used to remove all entries from the static block list. It will return false for get operation.
T/F hpnicfWIPSResetAllIgnoreList	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.11	TruthValue	read-write	This object is used to remove all entries from the ignore list. It will return false for get operation..
T/F hpnicfWIPSResetAllCtmList	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.12	TruthValue	read-write	This object is used to remove all entries from the static countermeasure list. It will return false for get operation.
OCT hpnicfWIPSPermitChlBitMap	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.13	OCTET STRING	read-write	Represents the permit channel number by bitmap.
I32 hpnicfWIPSDynamicTrustListAgingTime	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.14	Integer32	read-write	Represents the time for devices in the dynamic trust list getting aged.
I32 hpnicfWIPSDevUpdateTime	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.15	Integer32	read-write	Represents the period of WIPS update the status of devices.
T/F hpnicfWIPSADOSEnable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.16	TruthValue	read-write	Represents whether enable the ADOS feature. 'true': enable the ADOS feature. 'false': disable the ADOS feature.
T/F hpnicfWIPSAccessFlowScanEnable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.17	TruthValue	read-write	Represents whether the WIPS scanning feature during the access flow is enabled or not. 'true': enable the feature. 'false': disable the feature.
hpnicfWIPSVsdConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2
hpnicfWIPSVsdTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1		not-accessible	The table provides the list of virtual security domain.
hpnicfWIPSVsdEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1		not-accessible	Each entry contains information of each VSD.
OCT hpnicfWIPSVsdNameCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.1	OCTET STRING	not-accessible	Represents the name of virtual security domain.
ROW hpnicfWIPSVsdRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.2	RowStatus	read-create	The status of this table entry.
OCT hpnicfWIPSVsdAtkDctPolicyNameCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.3	OCTET STRING	read-create	Represents the name of attack detect policy attached to the VSD.
OCT hpnicfWIPSVsdCtmPolicyNameCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.4	OCTET STRING	read-create	Represents the name of countermeasure policy attached to the VSD.
OCT hpnicfWIPSVsdSigPolicyNameCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.5	OCTET STRING	read-create	Represents the name of signature policy attached to the VSD
OCT hpnicfWIPSVsdMalPktPolicyNameCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.6	OCTET STRING	read-create	Represents the name of malformed packet detect policy attached to the VSD
hpnicfWIPSRule2VsdTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2		not-accessible	The table defines the AP classification rules been attached to the VSD.
hpnicfWIPSRule2VsdEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2.1		not-accessible	Each entry contains information of each AP classification rule in each VSD.
OCT hpnicfWIPSRule2VsdAPClaRuleNameCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2.1.1	OCTET STRING	not-accessible	Represents the name of AP classification rule attached to the VSD.
ROW hpnicfWIPSRule2VsdRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2.1.2	RowStatus	read-create	The status of this table entry.
I32 hpnicfWIPSRule2VsdPrecedence	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2.1.3	Integer32	read-create	Represents the precedence of AP classification rule attached to the VSD.
hpnicfWIPSSensor2VsdTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3		not-accessible	The table defines the sensor been attached to the VSD.
hpnicfWIPSSensor2VsdEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3.1		not-accessible	Each entry contains information of each sensor in each VSD.
OCT hpnicfWIPSSensorNameCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3.1.1	OCTET STRING	not-accessible	Represents the name of sensor attached to the VSD.
ROW hpnicfWIPSSensor2VsdRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3.1.2	RowStatus	read-create	The status of this table entry.
INT hpnicfWIPSSensorState	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3.1.3	INTEGER	read-create	Represents the running state of the sensor. It will return false for set operation.
hpnicfWIPSSensorRadioTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.4		not-accessible	The table represents the list of sensor radio information.
hpnicfWIPSSensorRadioEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.4.1		not-accessible	Each entry contains information of a radio of a sensor.
I32 hpnicfWIPSSensorRadioRadioId	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.4.1.1	Integer32	not-accessible	Represents the radio identifier of the sensor.
INT hpnicfWIPSSensorRadioScanMode	1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.4.1.2	INTEGER	read-only	Represents the scanning mode configured to the radio.
hpnicfWIPSAPClaRuleTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3		not-accessible	The table defines the parameters for WIPS AP classification rule. One rule could be assigned to different VSDs.
hpnicfWIPSAPClaRuleEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1		not-accessible	Each entry contains information of each AP classification rule.
OCT hpnicfWIPSAPClaRuleName	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.1	OCTET STRING	not-accessible	Represents the name of AP classification rule.
ROW hpnicfWIPSAPClaRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.2	RowStatus	read-create	The status of this table entry.
U32 hpnicfWIPSAPClaSeverityLevel	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.3	Unsigned32	read-create	Represents the severity level of the AP classification rule. Available value limits from 0 to 100.
T/F hpnicfWIPSAPClaRuleMatchAll	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.4	TruthValue	read-create	Represents whether match all the AP classification sub-rules which have been configured.
HPN hpnicfWIPSAPClaType	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.5	HpnicfWIPSAPClassifyType	read-create	Represents the type of AP classification.
INT hpnicfWIPSAPClaSubRuleSSIDOperator	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.6	INTEGER	read-create	Represents the compare way of the SSID in the sub rule, including include/not include/equal/not equal.
T/F hpnicfWIPSAPClaSubRuleSSIDCase	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.7	TruthValue	read-create	Represents the case sensitive or not for the SSID match. 'true': Case insensitive. 'false': Case sensitive.
OCT hpnicfWIPSAPClaSubRuleSSID	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.8	OCTET STRING	read-create	Represents the SSID match template in the ap classification rule.
HPN hpnicfWIPSSecurityType	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.9	HpnicfWIPSAPSecurityType	read-create	Represents the security type of active AP.
INT hpnicfWIPSSecurityTypeMatch	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.10	INTEGER	read-create	Represents match way of the security type of active AP.
INT hpnicfWIPSAPAuthType	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.11	INTEGER	read-create	Represents the authentication type of the AP. undo - represents undo operation
U32 hpnicfWIPSMaxRSSIValue	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.12	Unsigned32	read-create	Represents the high-limit of the RSSI of AP. Available value limits from 1 to 90.
U32 hpnicfWIPSMinRSSIValue	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.13	Unsigned32	read-create	Represents the low-limit of the RSSI of AP. Available value limits from 0 to 89.
U32 hpnicfWIPSMaxDuration	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.14	Unsigned32	read-create	Represents the high-limit of the duration of AP. Available value limits from 1 to 2592000.
U32 hpnicfWIPSMinDuration	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.15	Unsigned32	read-create	Represents the low-limit of the duration of AP. Available value limits from 0 to 2591999.
U32 hpnicfWIPSMaxAPNum	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.16	Unsigned32	read-create	Represents the high-limit of the number of AP. Available value limits from 1 to 128.
U32 hpnicfWIPSMinAPNum	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.17	Unsigned32	read-create	Represents the low-limit of the number of AP. Available value limits from 0 to 127.
U32 hpnicfWIPSMaxClientNum	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.18	Unsigned32	read-create	Represents the high-limit of the number of client. Available value limits from 1 to 128.
U32 hpnicfWIPSMinClientNum	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.19	Unsigned32	read-create	Represents the low-limit of the number of client. Available value limits from 0 to 127.
OCT hpnicfWIPSOUIInfo	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.20	OCTET STRING	read-create	Represents the OUI hexadecimal string of the AP.
OCT hpnicfWIPSVendorInfo	1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.21	OCTET STRING	read-create	Represents the vendor info of the AP.
hpnicfWIPSAtkDctPolicyCfgGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4
OCT hpnicfWIPSAtkDctPolicyCfgSupportSet	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.1	OCTET STRING	read-only	Represents the bit string of supported attack detect policy. The specific attack detect policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit0: adhoc bit1: ap-spoof bit2: client-spoof bit3: prohibited channel bit4: ap-flood bit5: eapol-start bit6: authentication bit7: association bit8: reassociation bit9: weak-IV bit10: invalid-OUI
hpnicfWIPSAtkDctPolicyCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2		not-accessible	The table defines the parameters for WIPS attack detect policy.
hpnicfWIPSAtkDctPolicyCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1		not-accessible	Each entry contains information of each attack detect policy.
OCT hpnicfWIPSAtkDctPolicyName	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.1	OCTET STRING	not-accessible	Represents the name of attack detect policy.
ROW hpnicfWIPSAtkDctPolicyCfgRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.2	RowStatus	read-create	The status of this table entry.
OCT hpnicfWIPSAtkDctPolicyBitString	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.3	OCTET STRING	read-create	Represents the bit string of attack detect policy configuration. The specific attack detect policy is enabled if its corresponding bit is set to 1; disabled if its corresponding bit is set to 0. bit0: adhoc bit1: ap-spoof bit2: client-spoof bit3: prohibited channel bit4: ap-flood bit5: eapol-start bit6: authentication bit7: association bit8: reassociation bit9: weak-IV bit10: invalid-OUI
I32 hpnicfWIPSAtkDctPolicyAPFloodQT	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.4	Integer32	read-create	Represents the quiet time after reporting the AP flood attack event alarm.
I32 hpnicfWIPSAtkDctPolicyAPSpoofQT	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.5	Integer32	read-create	Represents the quiet time after reporting the AP spoofing attack event alarm.
I32 hpnicfWIPSAtkDctPolicyCliSpoofQT	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.6	Integer32	read-create	Represents the quiet time after reporting the client spoofing attack event alarm.
I32 hpnicfWIPSAtkDctPolicyDosAssoQT	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.7	Integer32	read-create	Represents the quiet time after reporting the dos of association attack event alarm.
I32 hpnicfWIPSAtkDctPolicyDosAuthQT	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.8	Integer32	read-create	Represents the quiet time after reporting the dos of authentication attack event alarm.
I32 hpnicfWIPSAtkDctPolicyDosEAPOLStartQT	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.9	Integer32	read-create	Represents the quiet time after reporting the dos of EAPOL-start attack event alarm.
I32 hpnicfWIPSAtkDctPolicyDosReAssoQT	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.10	Integer32	read-create	Represents the quiet time after reporting the dos of reassociation attack event alarm.
I32 hpnicfWIPSAtkDctPolicyWeakIVQT	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.11	Integer32	read-create	Represents the quiet time after reporting the weak-IV event alarm.
INT hpnicfWIPSAtkDctPolicyInvalidOUIAction	1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.12	INTEGER	read-create	Represents the action after detecting the invalid OUI, which classify the device as rogue device.
hpnicfWIPSStaticCtmListCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.5		not-accessible	The table provides the MAC address list of devices in the static countermeasure list.
hpnicfWIPSStaticCtmListCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.5.1		not-accessible	Each entry contains information of each MAC address in the static countermeasure list.
MAC hpnicfWIPSStaticCtmListMAC	1.3.6.1.4.1.11.2.14.11.15.2.118.1.5.1.1	MacAddress	not-accessible	Represents the MAC address in static countermeasure list.
ROW hpnicfWIPSStaticCtmListRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.5.1.2	RowStatus	read-create	The status of this table entry.
hpnicfWIPSStaticBlockListCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.6		not-accessible	The table provides the MAC address list of devices in the static block list. WIPS will ignore the frames from the devices in the list, and take the devices as rogue devices.
hpnicfWIPSStaticBlockListCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.6.1		not-accessible	Each entry contains information of each MAC address in the static block list.
MAC hpnicfWIPSStaticBlockListMAC	1.3.6.1.4.1.11.2.14.11.15.2.118.1.6.1.1	MacAddress	not-accessible	Represents the MAC address in static block list.
ROW hpnicfWIPSStaticBlockListRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.6.1.2	RowStatus	read-create	The status of this table entry.
hpnicfWIPSStaticTrustListCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.7		not-accessible	The table provides the MAC address list of devices in the static trust list. WIPS will take the devices in the list as authorized devices.
hpnicfWIPSStaticTrustListCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.7.1		not-accessible	Each entry contains information of each MAC address in the static trust list.
MAC hpnicfWIPSStaticTrustListMAC	1.3.6.1.4.1.11.2.14.11.15.2.118.1.7.1.1	MacAddress	not-accessible	Represents the MAC address in static trust list.
ROW hpnicfWIPSStaticTrustListRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.7.1.2	RowStatus	read-create	The status of this table entry.
hpnicfWIPSIgnoreListCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.8		not-accessible	The table provides the MAC address list of devices in the ignore list. WIPS will ignore the events caused by the device in the list.
hpnicfWIPSIgnoreListCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.8.1		not-accessible	Each entry contains information of each MAC address in the ignore list.
MAC hpnicfWIPSIgnoreListMAC	1.3.6.1.4.1.11.2.14.11.15.2.118.1.8.1.1	MacAddress	not-accessible	Represents the MAC address in ignore list.
ROW hpnicfWIPSIgnoreListRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.8.1.2	RowStatus	read-create	The status of this table entry.
hpnicfWIPSDctModeTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.9		not-accessible	The table represents the list of AP scanning mode configuration on radio.
hpnicfWIPSDctModeEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1		not-accessible	Each entry contains information of WIPS scanning mode on radio.
OCT hpnicfWIPSDctModeAPName	1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1.1	OCTET STRING	not-accessible	Represents the name of AP.
I32 hpnicfWIPSDctModeRadio	1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1.2	Integer32	not-accessible	Represents the radio of AP.
INT hpnicfWIPSDctModeScanMode	1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1.3	INTEGER	read-create	Represents the scanning mode. The radio enable-disable status must be disabled before WIPS scanning mode is configured on this radio. The mesh feature must be disabled before any WIPS scanning mode is set on radio. This radio can not apply any service template before the detectOnly scanning mode is set on the radio.
ROW hpnicfWIPSDctModeRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1.4	RowStatus	read-create	The status of this table entry.
hpnicfWIPSSigConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10
hpnicfWIPSSigPolicyTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.1		not-accessible	The table defines the parameters for WIPS signature policy. One policy could be assigned to different VSDs.
hpnicfWIPSSigPolicyEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.1.1		not-accessible	Each entry contains information of each signature policy.
OCT hpnicfWIPSSigPolicyNameCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.1.1.1	OCTET STRING	not-accessible	Represents the name of signature policy.
ROW hpnicfWIPSSigPolicyRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.1.1.2	RowStatus	read-create	The status of this table entry.
hpnicfWIPSSigRule2PolicyTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2		not-accessible	The table defines the signature rules been attached to the signature policy.
hpnicfWIPSSigRule2PolicyEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2.1		not-accessible	Each entry contains information of each signature rules attached to signature policy.
U32 hpnicfWIPSSigRule2PolicySigRuleIDCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2.1.1	Unsigned32	not-accessible	Represents the ID of signature rule attached to signature policy.
ROW hpnicfWIPSSigRule2PolicyRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2.1.2	RowStatus	read-create	The status of this table entry.
U32 hpnicfWIPSSigRule2PolicyPrecedence	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2.1.3	Unsigned32	read-create	Represents the precedence of signature rule attached to signature policy.
hpnicfWIPSSigRuleTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3		not-accessible	The table defines the signature rules.
hpnicfWIPSSigRuleEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1		not-accessible	Each entry contains information of each signature rules.
OCT hpnicfWIPSSigRuleName	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.1	OCTET STRING	not-accessible	Represents the name of signature rule.
I32 hpnicfWIPSSigRuleID	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.2	Integer32	read-create	Represents the ID of signature rule. The values from 1 to 32 are for built-in rules, which can not be assigned to user-define rules. When a user-define signature rule is being created, if ID is not specified, the ID of the rule will be automatically assigned, which values from 33 to 64. Once the rule is created, the ID is fixed and can not be changed again.
ROW hpnicfWIPSSigRuleRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.3	RowStatus	read-create	The status of this table entry.
T/F hpnicfWIPSSigSubRuleMatchAll	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.4	TruthValue	read-create	Represents whether match all the sub rules which have been configured in the signature rule. The default value for user-define rule is false, and for built-in rule is true.
U32 hpnicfWIPSSigRuleDctPeriod	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.5	Unsigned32	read-create	Represents the detect period of signature rule. Available value limits from 1 to 3600. The default value depends on the certain rule. For user-define rules it is 60. The value 0xffffffff represents restoring default value operation.
INT hpnicfWIPSSigRuleTrackMethod	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.6	INTEGER	read-create	Represents the track-method for the signature rule. The default value depends on the certain rule. For user-define rules it is 'both(3)'.
U32 hpnicfWIPSSigRuleDctThresholdPerMAC	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.7	Unsigned32	read-create	Represents the detect threshold for per-MAC track-method. Available value limits from 1 to 32000. The default value depends on the certain rule. For user-define rules it is 1000. The value 0xffffffff represents restoring default value operation.
U32 hpnicfWIPSSigRuleDctThresholdPerSig	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.8	Unsigned32	read-create	Represents the detect threshold for per-Signature track-method. Available value limits from 1 to 32000. The default value depends on the certain rule. For user-define rules it is 1000. The value 0xffffffff represents restoring default value operation.
U32 hpnicfWIPSSigRuleActionEvtLevel	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.9	Unsigned32	read-create	Represents the level of event sended for the action of reporting event alarm. Available value limits from 0 to 7. The default value depends on the certain rule. For user-define rules it is 0xffffffff.
U32 hpnicfWIPSSigRuleQuietTime	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.10	Unsigned32	read-create	Represents the quiet time after reporting event alarm. Available value limits from 60 to 32000. The default value depends on the certain rule. For user-define rules it is 900. The value 0xffffffff represents restoring default value operation.
INT hpnicfWIPSSigSubRuleFrameType	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.11	INTEGER	read-create	Represents the type of frame to match. 0x0 management type 0x1 control type 0x2 data type The default value depends on the certain rule. For user-define rules it is 'undo(3)'.
INT hpnicfWIPSSigSubRuleFrameSubType	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.12	INTEGER	read-create	Represents the sub-type of frame to match. 1 association request 2 association response 3 probe request 4 beacon 5 disassoc 6 authentication 7 de-authentication The default value depends on the certain rule. For user-define rules it is 'none(0)'.
OCT hpnicfWIPSSigSubRuleMac	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.13	OCTET STRING	read-create	Represents the MAC address or BSSID to match.
INT hpnicfWIPSSigSubRuleMacType	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.14	INTEGER	read-create	Represents the type of MAC address or BSSID to match. 0 Source MAC address in the 802.11 frame header 1 Destination MAC address in the 802.11 frame header 2 BSSID field in the 802.11 frame header
U32 hpnicfWIPSSigSubRuleSeqNumMin	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.15	Unsigned32	read-create	Represents the minimun value of sequence number of packet to match. Available value limits from 0 to 4094. The default value depends on the certain rule. For user-define rules it is 0xffffffff. The value 0xffffffff represents restoring default value operation.
U32 hpnicfWIPSSigSubRuleSeqNumMax	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.16	Unsigned32	read-create	Represents the maximum value of sequence number of packet to match. Available value limits from 1 to 4095. The default value depends on the certain rule. For user-define rules it is 0xffffffff. The value 0xffffffff represents restoring default value operation.
U32 hpnicfWIPSSigSubRuleSSIDLenMin	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.17	Unsigned32	read-create	Represents the minimun value of SSID of packet to match. Available value limits from 0 to 31. The default value depends on the certain rule. For user-define rules it is 0xffffffff. The value 0xffffffff represents restoring default value operation.
U32 hpnicfWIPSSigSubRuleSSIDLenMax	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.18	Unsigned32	read-create	Represents the maximum value of SSID of packet to match. Available value limits from 1 to 32. The default value depends on the certain rule. For user-define rules it is 0xffffffff. The value 0xffffffff represents restoring default value operation.
OCT hpnicfWIPSSigSubRuleSSID	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.19	OCTET STRING	read-create	Represents the string of SSID of packet to match.
INT hpnicfWIPSSigSubRuleSSIDOpe	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.20	INTEGER	read-create	Represents the compare way of the SSID in the sub rule, including include/not include/equal/not equal.
T/F hpnicfWIPSSigSubRuleSSIDCase	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.21	TruthValue	read-create	Represents the case sensitive or not for the SSID match. 'true': Case insensitive. 'false': Case sensitive.
hpnicfWIPSSigSubRulePatternTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4		not-accessible	The table defines the signature sub rules which define the user-define match way through pattern of packet.
hpnicfWIPSSigSubRulePatternEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1		not-accessible	Each entry contains information of each pattern signature sub rules.
U32 hpnicfWIPSSigSubRulePatternID	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.1	Unsigned32	not-accessible	Represents the ID of the pattern sub rule.
ROW hpnicfWIPSSigSubRuleRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.2	RowStatus	read-write	The status of this table entry.
OCT hpnicfWIPSSigSubRulePatternName	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.3	OCTET STRING	read-write	Represents the name of the pattern sub rule.
I32 hpnicfWIPSSigSubRulePatternOffset	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.4	Integer32	read-write	Represents the offset value of packet match.
I32 hpnicfWIPSSigSubRulePatternMask	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.5	Integer32	read-write	Represents the mask value of packet match.
U32 hpnicfWIPSSigSubRulePatternValueMin	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.6	Unsigned32	read-write	Represents the minimun value of match byte. Available value limits from 0 to 65534.
U32 hpnicfWIPSSigSubRulePatternValueMax	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.7	Unsigned32	read-write	Represents the maximun value of match byte. Available value limits from 1 to 65535.
T/F hpnicfWIPSSigSubRulePatternFromPayload	1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.8	TruthValue	read-write	Represents whether match start from the payload of the data frame.
hpnicfWIPSCtmConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11
OCT hpnicfWIPSCtmPolicyCfgSupportSet	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.1	OCTET STRING	read-only	Represents the bit string of supported countermeasure policy. The specific countermeasure policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit3: misconfigured AP bit4: rogue AP bit5: unauthorized station bit6: external AP bit9: misassociation station bit10: potential authorized AP bit11: potential rogue AP bit12: potential external AP bit13: uncategorized AP bit14: uncategorized station
hpnicfWIPSCtmPolicyTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2		not-accessible	The table defines the parameters for WIPS countermeasure policy. One policy could be assigned to different VSDs.
hpnicfWIPSCtmPolicyEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1		not-accessible	Each entry contains information of each countermeasure policy.
OCT hpnicfWIPSCtmPolicyName	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.1	OCTET STRING	not-accessible	Represents the name of countermeasure policy.
ROW hpnicfWIPSCtmPolicyCfgRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.2	RowStatus	read-create	The status of this table entry.
OCT hpnicfWIPSCtmPolicyBitString	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.3	OCTET STRING	read-create	Represents the bit string of countermeasure policy configuration. The specific countermeasure of device is enabled if its corresponding bit is set to 1; disabled if its corresponding bit is set to 0. bit3: misconfigured AP bit4: rogue AP bit5: unauthorized station bit6: external AP bit9: misassociation station bit10: potential authorized AP bit11: potential rogue AP bit12: potential external AP bit13: uncategorized AP bit14: uncategorized station
T/F hpnicfWIPSCtmPolicyFixedChl	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.4	TruthValue	read-create	Represents whether enable fixed channel scan function.
U32 hpnicfWIPSCtmPolicyRogueAPPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.5	Unsigned32	read-create	Represents the precedence of countermeasure for rogue AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyPtRogueAPPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.6	Unsigned32	read-create	Represents the precedence of countermeasure for potential rogue AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyMisconfAPPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.7	Unsigned32	read-create	Represents the precedence of countermeasure for misconfigured AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyExternalAPPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.8	Unsigned32	read-create	Represents the precedence of countermeasure for external AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyPtExternalAPPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.9	Unsigned32	read-create	Represents the precedence of countermeasure for potential external AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyUncateAPPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.10	Unsigned32	read-create	Represents the precedence of countermeasure for uncategorized AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyPtAuthAPPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.11	Unsigned32	read-create	Represents the precedence of countermeasure for potential authorized AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyMisassoStaPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.12	Unsigned32	read-create	Represents the precedence of countermeasure for misassociated station. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyUncateStaPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.13	Unsigned32	read-create	Represents the precedence of countermeasure for uncategorized station. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
U32 hpnicfWIPSCtmPolicyUnauthStaPre	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.14	Unsigned32	read-create	Represents the precedence of countermeasure for unauthorized station. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
hpnicfWIPSCtmPolicyDevListTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.3		not-accessible	The table defines the MAC address list of countermeasure device in WIPS countermeasure policy.
hpnicfWIPSCtmPolicyDevListEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.3.1		not-accessible	Each entry contains information of each MAC address of device.
MAC hpnicfWIPSCtmPolicyDevMAC	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.3.1.1	MacAddress	not-accessible	Represents the MAC address of countermeasure device.
ROW hpnicfWIPSCtmPolicyDevRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.3.1.2	RowStatus	read-create	The status of this table entry.
hpnicfWIPSMalPktDctConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12
OCT hpnicfWIPSMalPktDctCfgLogSupportSet	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.1	OCTET STRING	read-only	Represents the bit string of supported malformed packet detect policy controlling the log function. The specific malformed packet detect policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
OCT hpnicfWIPSMalPktDctCfgTrapSupportSet	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.2	OCTET STRING	read-only	Represents the bit string of supported malformed packet detect policy controlling the trap function. The specific malformed packet detect policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
hpnicfWIPSMalPktDctPolicyTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3		not-accessible	Represents.
hpnicfWIPSMalPktDctPolicyEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1		not-accessible	Represents.
OCT hpnicfWIPSMalPktDctPolicyName	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.1	OCTET STRING	not-accessible	Represents the name of malformed packet detect policy.
ROW hpnicfWIPSMalPktDctPolicyCfgRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.2	RowStatus	read-create	The status of this table entry.
OCT hpnicfWIPSMalPktDctPolicyLogBitString	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.3	OCTET STRING	read-create	Represents the bit string of malformed packet detect policy controlling the log function configuration. The specific malformed packet detect is enbled if its corresponding bit is set to 1; disabled its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
OCT hpnicfWIPSMalPktDctPolicyTrapBitString	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.4	OCTET STRING	read-create	Represents the bit string of malformed packet detect policy controlling the trap function configuration. The specific malformed packet detect is enbled if its corresponding bit is set to 1; disabled its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
I32 hpnicfWIPSMalPktDctPolicyDurationThreshold	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.5	Integer32	read-create	Represents the threshold of duration for large duration malformed packet detection.
I32 hpnicfWIPSMalPktDctPolicyQuietTime	1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.6	Integer32	read-create	Represents the quiet time after reporting event alarm.
hpnicfWIPSStaticTrustOUIListCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.13		not-accessible	The table provides the OUI list of devices in the static trust list. WIPS will take the devices in the list as authorized devices.
hpnicfWIPSStaticTrustOUIListCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.13.1		not-accessible	Each entry contains information of each OUI in the static trust list.
OCT hpnicfWIPSStaticTrustOUIListOUI	1.3.6.1.4.1.11.2.14.11.15.2.118.1.13.1.1	OCTET STRING	not-accessible	Represents the OUI in static trust list.
ROW hpnicfWIPSStaticTrustOUIListRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.13.1.2	RowStatus	read-create	The status of this table entry.
hpnicfWIPSStaticTrustVendorListCfgTable	1.3.6.1.4.1.11.2.14.11.15.2.118.1.14		not-accessible	The table provides the vendor list of devices in the static trust list. WIPS will take the devices in the list as authorized devices.
hpnicfWIPSStaticTrustVendorListCfgEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.1.14.1		not-accessible	Each entry contains information of each vendor in the static trust list.
OCT hpnicfWIPSStaticTrustVendorListVendor	1.3.6.1.4.1.11.2.14.11.15.2.118.1.14.1.1	OCTET STRING	not-accessible	Represents the vendor in static trust list.
ROW hpnicfWIPSStaticTrustVendorListRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.1.14.1.2	RowStatus	read-create	The status of this table entry.
hpnicfWIPSDetectGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.2
hpnicfWIPSDctAPTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1		not-accessible	The table represents the list of possible BSS information for APs detected by the WIPS.
hpnicfWIPSDctAPEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1		not-accessible	Each entry contains possible BSS information of each AP detected by WIPS.
OCT hpnicfWIPSDctAPVSD	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.1	OCTET STRING	not-accessible	Represents the virtual security domain where the BSS was detected.
MAC hpnicfWIPSDctAPBSSID	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.2	MacAddress	not-accessible	Represents the Basic Service Set.
TIK hpnicfWIPSDctAPRunningTime	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.3	TimeTicks	read-only	Represents the time since AP started to work, which is got from beacon/probe response frame.
TIK hpnicfWIPSDctAPRunTmLastUpdateTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.4	TimeTicks	read-only	Represents the time update hpnicfWIPSDctAPRunningTime since system is up.
T/F hpnicfWIPSDctAPIsCountered	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.5	TruthValue	read-only	Represents whether the detected AP is countered by WIPS.
HPN hpnicfWIPSDctAPWorkChannel	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.6	HpnicfWIPSChannel	read-only	Represents the radio channel which the detected AP work on.
HPN hpnicfWIPSDctAPRadioType	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.7	HpnicfWIPSRadioType	read-only	Represents the radio type used by the detected AP.
HPN hpnicfWIPSDctAPAuthMethod	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.8	HpnicfWIPSAuthMethod	read-only	Represents the authentication method used by the detected AP. none(1) - No key management mode configured, psk(2) - pre-shared key authentication, dot1x(3) - 802.1x authentication. other(4) - other authentication.
HPN hpnicfWIPSDctAPEncryptMethod	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.9	HpnicfWIPSEncryptMethod	read-only	Represents the encrypt method used by the detected AP. none(1) - clear text or no cipher method is configure, wep(2) - WEP key, tkip(4) - WPA Temporal Key encryption, ccmp(8) - WPA AES CCMP encryption
HPN hpnicfWIPSDctAPSecurity	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.10	HpnicfWIPSAPSecurityType	read-only	Represents the security suites of the detected AP. clear 0x01 wpa2 0x02 wpa 0x04 wep 0x08
U32 hpnicfWIPSDctAPSeverityLevel	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.11	Unsigned32	read-only	Represents the severity level of the detected AP.
TIK hpnicfWIPSDctAPLastDctTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.12	TimeTicks	read-only	Represents the time that AP was detected for the last time since system is up.
TIK hpnicfWIPSDctAPFirstDctTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.13	TimeTicks	read-only	Represents the time that AP was detected for the first time since system is up.
T/F hpnicfWIPSDctAPAdd2BlackList	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.14	TruthValue	read-write	Represents whether the AP will be taken as a rogue AP. If the value is true, the MAC address will be automatically added into hpnicfWIPSBlockListTable and the category of the AP will be taken as rogue. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSBlockListTable.
T/F hpnicfWIPSDctAPAdd2WhiteList	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.15	TruthValue	read-write	Represents whether the AP will be taken as an authorized AP. If the value is true, the MAC address will be automatically added into hpnicfWIPSTrustListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSTrustListTable
T/F hpnicfWIPSDctAPAdd2IgnoreList	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.16	TruthValue	read-write	Represents whether the AP will be taken as an ignored AP. If the value is true, the MAC address will be automatically added into hpnicfWIPSIgnoreListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSIgnoreListTable
T/F hpnicfWIPSDctAPAdd2CtmList	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.17	TruthValue	read-write	Represents whether the AP will be taken as a countered AP. If the value is true, the MAC address will be automatically added into hpnicfWIPSCountermeasureListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSCountermeasureListTable.
HPN hpnicfWIPSDctAPCategory	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.18	HpnicfWIPSAPCategoryType	read-write	Represents the categorized result of the AP. For set operation, only the following values are valid: authorized(2),rogue(3),misconfigured(4),external(5)
HPN hpnicfWIPSDctAPCategoryWay	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.19	HpnicfWIPSDevCategoryWay	read-write	Represents by which way the AP is categorized. manual(1) -categorized by user autoByNMS(2) -categorized by NMS(Network Management System) autoByDev(3) -categorized by WIPS
HPN hpnicfWIPSDctAPStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.20	HpnicfWIPSDevStatus	read-only	Represents the status of the AP detected by WIPS.
OCT hpnicfWIPSDctAPSSID	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.21	OCTET STRING	read-only	Represents the SSID broadcasted by AP.
I32 hpnicfWIPSDctAPAttachStaNum	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.22	Integer32	read-only	Represents the number of clients associated with the detected AP.
I32 hpnicfWIPSDctAPRptSensorNum	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.23	Integer32	read-only	Represents the number of sensors detecting the AP.
OCT hpnicfWIPSDctAPVendor	1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.24	OCTET STRING	read-only	Represents the vendor of this AP detected by WIPS.
hpnicfWIPSDctAPAttachStaTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.2		not-accessible	The table represents the list of station associated with APs detected by the WIPS.
hpnicfWIPSDctAPAttachStaEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.2.1		not-accessible	Each entry contains possible station information detected by WIPS.
MAC hpnicfWIPSDctAPAttachStaMac	1.3.6.1.4.1.11.2.14.11.15.2.118.2.2.1.1	MacAddress	not-accessible	Represents the MAC address of station associated with AP.
ROW hpnicfWIPSDctAPAttachStaRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.2.2.1.2	RowStatus	read-only	The status of this table entry. It is read-only and will return 'Not writable' for set operation.
hpnicfWIPSDctAPRptSensorTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.3		not-accessible	The table represents the list of sensors.
hpnicfWIPSDctAPRptSensorEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1		not-accessible	Each entry contains possible sensor information of WIPS.
OCT hpnicfWIPSDctAPRptSensorName	1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1.1	OCTET STRING	not-accessible	Represents the name of sensor.
I32 hpnicfWIPSDctAPRptSensorRadioId	1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1.2	Integer32	read-only	Represents on which radio the sensor AP detected the AP.
I32 hpnicfWIPSDctAPRptRSSI	1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1.3	Integer32	read-only	Represents the current value of signal strength that WIPS sensor AP received from the AP.
TIK hpnicfWIPSDctAPLastRptTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1.4	TimeTicks	read-only	Represents the time that AP was detected by this sensor for the last time since system is up.
hpnicfWIPSDctStaTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4		not-accessible	The table represents the list of possible information for stations detected by the WIPS.
hpnicfWIPSDctStaEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1		not-accessible	Each entry contains possible station information of each station detected by WIPS.
OCT hpnicfWIPSDctStaVSD	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.1	OCTET STRING	not-accessible	Represents the virtual security domain in which the station was detected.
MAC hpnicfWIPSDctStaMac	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.2	MacAddress	not-accessible	Represents the MAC address of station.
MAC hpnicfWIPSDctStaAssocBSSID	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.3	MacAddress	read-only	Represents the BSSID which station associates with.
HPN hpnicfWIPSDctStaStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.4	HpnicfWIPSDevStatus	read-only	Represents the status of this station detected by WIPS.
HPN hpnicfWIPSDctStaCategory	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.5	HpnicfWIPSClientCategoryType	read-only	Represents the categorized result of the station.
HPN hpnicfWIPSDctStaRadioType	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.6	HpnicfWIPSRadioType	read-only	Represents the radio type used by the detected station.
HPN hpnicfWIPSDctStaWorkChannel	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.7	HpnicfWIPSChannel	read-only	Represents on which radio channel that WIPS sensor AP detected the station.
T/F hpnicfWIPSDctStaIsCountered	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.8	TruthValue	read-only	Represents whether the detected station is countered by WIPS.
T/F hpnicfWIPSDctStaAdd2BlackList	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.9	TruthValue	read-write	Represents whether the station will be taken as a rogue station. If the value is true, the MAC address will be automatically added into hpnicfWIPSBlockListTable and the category of the station will be taken as rogue. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSBlockListTable.
T/F hpnicfWIPSDctStaAdd2WhiteList	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.10	TruthValue	read-write	Represents whether the station will be taken as an authorized station. If the value is true, the MAC address will be automatically added into hpnicfWIPSTrustListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSTrustListTable.
T/F hpnicfWIPSDctStaAdd2IgnoreList	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.11	TruthValue	read-write	Represents whether the station will be taken as an ignored station. If the value is true, the MAC address will be automatically added into hpnicfWIPSIgnoreListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSIgnoreListTable.
T/F hpnicfWIPSDctStaAdd2CtmList	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.12	TruthValue	read-write	Represents whether the station will be taken as a countered station. If the value is true, the MAC address will be automatically added into hpnicfWIPSCountermeasureListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSCountermeasureListTable.
TIK hpnicfWIPSDctStaFirstDctTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.13	TimeTicks	read-only	Represents the time that station was detected for the first time since system is up.
TIK hpnicfWIPSDctStaLastDctTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.14	TimeTicks	read-only	Represents the time that station was detected for the last time since system is up.
I32 hpnicfWIPSDctStaRptSensorNum	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.15	Integer32	read-only	Represents the number of sensors detecting the station.
INT hpnicfWIPSDctStaState	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.16	INTEGER	read-only	Represents the authentication state of station with AP.
OCT hpnicfWIPSDctStaVendor	1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.17	OCTET STRING	read-only	Represents the vendor of this station detected by WIPS.
hpnicfWIPSDctStaRptSensorTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.5		not-accessible	The table represents the list of sensors detecting the station.
hpnicfWIPSDctStaRptSensorEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1		not-accessible	Each entry contains possible sensor information of WIPS.
OCT hpnicfWIPSDctStaRtpSensorName	1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1.1	OCTET STRING	not-accessible	Represents the name of sensor.
I32 hpnicfWIPSDctStaRptSensorRadioId	1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1.2	Integer32	read-only	Represents on which radio the sensor AP detected the station.
I32 hpnicfWIPSDctStaRptRSSI	1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1.3	Integer32	read-only	Represents the current value of signal strength that WIPS sensor AP received from the station.
TIK hpnicfWIPSDctStaLastRptTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1.4	TimeTicks	read-only	Represents the time that station was detected by this sensor for the last time since system is up.
hpnicfWIPSDctSSIDTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6		not-accessible	The table represents the list of possible ESS information for networks detected by WIPS.
hpnicfWIPSDctSSIDEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1		not-accessible	Each entry contains possible ESS information of each ESS detected by WIPS.
OCT hpnicfWIPSDctNetworkVSD	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.1	OCTET STRING	not-accessible	Represents the virtual security domain in which the ESS was detected.
OCT hpnicfWIPSDctNetworkSSID	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.2	OCTET STRING	not-accessible	Represents the service set identifier for the ESS. Using the ASCII value '1' represents that the SSID is not advertised in the beacon frames.
U32 hpnicfWIPSDctNetworkCfg	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.3	Unsigned32	not-accessible	Represents the encrypt method, security suite and authentication method which are used by the detected ESS. The lowest 8 bits mean encrypt method. The higher 8 bits mean security suite. The third 8 bits stand for authentication method. The higerest 8 bits are reserved. The meaning is shown as follows: 31 23 15 7 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \| reserved \| auth method \| security suite\|encryptmethod\| + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + For encrypt method, the following values are supported: 1: none - clear text or no cipher method is configure, 2: wep - WEP key, 4: tkip - WPA Temporal Key encryption, 8: ccmp - WPA AES CCMP encryption For security suite, the following values are supported: 0x01: clear 0x02: wpa2 0x04: wpa 0x08: wep For authentication method, the following values are supported: 1: none - No key management mode configured, 2: psk - pre-shared key authentication, 3: dot1x - 802.1x authentication. 4: other - other authentication
TIK hpnicfWIPSDctNetworkFirstRptTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.4	TimeTicks	read-only	Represents the time that ESS was detected for the first time since system is up.
TIK hpnicfWIPSDctNetworkLastRptTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.5	TimeTicks	read-only	Represents the time that ESS was detected for the last time since system is up.
HPN hpnicfWIPSDctNetworkStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.6	HpnicfWIPSDevStatus	read-only	Represents the status of this ESS detected by WIPS.
T/F hpnicfWIPSDctNetworkSSIDHide	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.7	TruthValue	read-only	Represents whether the ESS broadcasted its SSID.
I32 hpnicfWIPSDctNetworkBSSNum	1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.8	Integer32	read-only	Represents the number of APs using the same SSID in the ESS.
hpnicfWIPSDctSSIDBSSTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.7		not-accessible	The table represents the list of APs using the same SSID in the ESS.
hpnicfWIPSDctSSIDBSSEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.7.1		not-accessible	Each entry contains possible BSS information of each AP detected by WIPS.
MAC hpnicfWIPSDctNetworkBSSID	1.3.6.1.4.1.11.2.14.11.15.2.118.2.7.1.1	MacAddress	not-accessible	Represents the Basic Service Set.
HPN hpnicfWIPSDctNetworkBSSWorkChl	1.3.6.1.4.1.11.2.14.11.15.2.118.2.7.1.2	HpnicfWIPSChannel	read-only	Represents on which radio channel that WIPS sensor AP detected the BSS.
I32 hpnicfWIPSDctNetworkBSSStaNum	1.3.6.1.4.1.11.2.14.11.15.2.118.2.7.1.3	Integer32	read-only	Represents the number of clients associated with the detected BSS.
hpnicfWIPSBlockListTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.8		not-accessible	The table represents the list of block device MAC address.
hpnicfWIPSBlockListEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.8.1		not-accessible	Each entry contains block device MAC address information.
MAC hpnicfWIPSBlockListMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.118.2.8.1.1	MacAddress	not-accessible	Represents the MAC address of block device.
INT hpnicfWIPSBlockListStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.2.8.1.2	INTEGER	read-only	Represents the status of block device.
hpnicfWIPSChannelTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.9		not-accessible	The table represents the list of channel information.
hpnicfWIPSChannelEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1		not-accessible	Each entry contains channel information.
HPN hpnicfWIPSChannelNum	1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1.1	HpnicfWIPSChannel	not-accessible	Represents the channel number.
HPN hpnicfWIPSChannelRadioType	1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1.2	HpnicfWIPSRadioType	read-only	Represents the radio type used in the specific channel.
T/F hpnicfWIPSChannelIsPermitted	1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1.3	TruthValue	read-only	Represents whether the channel is permitted.
TIK hpnicfWIPSChannelLastRptTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1.4	TimeTicks	read-only	Represents the latest time that detecting the channel is active.
hpnicfWIPSCountermeasureListTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.10		not-accessible	The table represents the list of global static countermeasure device information.
hpnicfWIPSCountermeasureListEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1		not-accessible	Each entry contains countermeasure device information.
MAC hpnicfWIPSCtmListMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.1	MacAddress	not-accessible	Represents the MAC address of the countered device.
HPN hpnicfWIPSCtmListLastestWorkChl	1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.2	HpnicfWIPSChannel	read-only	Represents the channel on which the countermeasure device was working.
TIK hpnicfWIPSCtmListFirstTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.3	TimeTicks	read-only	Represents the first time that the device was countered since system is up.
TIK hpnicfWIPSCtmListLastTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.4	TimeTicks	read-only	Represents the last time that the device was countered since system is up.
I32 hpnicfWIPSCtmListQurCnt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.5	Integer32	read-only	Represents how many times that the device was countered.
I32 hpnicfWIPSCtmListSensorNum	1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.6	Integer32	read-only	Represents the number of sensors detecting the device.
hpnicfWIPSIgnoreListTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.11		not-accessible	The table represents the list of ignored device information.
hpnicfWIPSIgnoreListEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1		not-accessible	Each entry contains ignored device information.
MAC hpnicfWIPSIgnoreListMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1.1	MacAddress	not-accessible	Represents the MAC address of the ignored device.
TIK hpnicfWIPSIgnoreListFirstIgnoreTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1.2	TimeTicks	read-only	Represents the first time when the event caused by the device was ignored since system is up.
TIK hpnicfWIPSIgnoreListLastIgnoreTm	1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1.3	TimeTicks	read-only	Represents the last time when the event caused by the device was ignored since system is up.
I32 hpnicfWIPSIgnoreListIgnoreCnt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1.4	Integer32	read-only	Represents the number of times of the event caused by device has been ignored.
hpnicfWIPSTrustListTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.12		not-accessible	The table represents the list of trust device information.
hpnicfWIPSTrustListEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.12.1		not-accessible	Each entry contains information of a trust device.
MAC hpnicfWIPSTrustListMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.118.2.12.1.1	MacAddress	not-accessible	Represents the MAC address of the trust device.
INT hpnicfWIPSTrustListStatus	1.3.6.1.4.1.11.2.14.11.15.2.118.2.12.1.2	INTEGER	read-only	Represents the status of the trust device.
hpnicfWIPSChlStatTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13		not-accessible	The table represents the list of channel statistics information.
hpnicfWIPSChlStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1		not-accessible	Each entry contains information of channel statistics.
MAC hpnicfWIPSChlStatSensorMacAddr	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.1	MacAddress	not-accessible	Represents the MAC address of sensor.
HPN hpnicfWIPSChlStatChannel	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.2	HpnicfWIPSChannel	not-accessible	Represents the statistics channel.
C64 hpnicfWIPSChlStatTotalPktEx	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.3	Counter64	read-only	Represents the count of total frames in the channel.
C64 hpnicfWIPSChlStatTotalByte	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.4	Counter64	read-only	Represents the length of total frames in the channel.
C64 hpnicfWIPSChlStatBmcastPkt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.5	Counter64	read-only	Represents the count of broadcast and multicast frames in the channel.
C64 hpnicfWIPSChlStatBmcastByte	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.6	Counter64	read-only	Represents the total length of broadcast and multicast frames in the channel.
C64 hpnicfWIPSChlStatUnicastPkt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.7	Counter64	read-only	Represents the count of unicast frames in the channel.
C64 hpnicfWIPSChlStatUnicastByte	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.8	Counter64	read-only	Represents the total length of unicast frames in the channel.
C64 hpnicfWIPSChlStatManagement	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.9	Counter64	read-only	Represents the count of management frames in the channel.
C64 hpnicfWIPSChlStatControl	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.10	Counter64	read-only	Represents the count of control frames in the channel.
C64 hpnicfWIPSChlStatData	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.11	Counter64	read-only	Represents the count of data frames in the channel.
C64 hpnicfWIPSChlStatBeacon	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.12	Counter64	read-only	Represents the count of beacon frames in the channel.
C64 hpnicfWIPSChlStatRTS	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.13	Counter64	read-only	Represents the count of RTS frames in the channel.
C64 hpnicfWIPSChlStatCTS	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.14	Counter64	read-only	Represents the count of CTS frames in the channel.
C64 hpnicfWIPSChlStatProbeRequest	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.15	Counter64	read-only	Represents the count of probe request frames in the channel.
C64 hpnicfWIPSChlStatProbeResponse	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.16	Counter64	read-only	Represents the count of probe response frames in the channel.
C64 hpnicfWIPSChlStatFragment	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.17	Counter64	read-only	Represents the count of fragment frames in the channel.
C64 hpnicfWIPSChlStatRetry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.18	Counter64	read-only	Represents the count of retry frames in the channel.
C64 hpnicfWIPSChlStatEapSuccess	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.19	Counter64	read-only	Represents the count of EAP-Success frames in the channel.
C64 hpnicfWIPSChlStatEapFailure	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.20	Counter64	read-only	Represents the count of EAP-Failure frames in the channel.
C64 hpnicfWIPSChlStatEapolStart	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.21	Counter64	read-only	Represents the count of EAPOL-Start frames in the channel.
C64 hpnicfWIPSChlStatEapolLogoff	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.22	Counter64	read-only	Represents the count of EAPOL-Logoff frames in the channel.
C64 hpnicfWIPSChlStatAssocRequest	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.23	Counter64	read-only	Represents the count of association request frames in the channel.
C64 hpnicfWIPSChlStatAssocResponse	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.24	Counter64	read-only	Represents the count of association response frames in the channel.
C64 hpnicfWIPSChlStatUnicastDisassoc	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.25	Counter64	read-only	Represents the count of unicast disassociation frames in the channel.
C64 hpnicfWIPSChlStatBroadcastDisassoc	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.26	Counter64	read-only	Represents the count of broadcast disassociation frames in the channel.
C64 hpnicfWIPSChlStatAuthentication	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.27	Counter64	read-only	Represents the count of authentication frames in the channel.
C64 hpnicfWIPSChlStatUnicastDeauthen	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.28	Counter64	read-only	Represents the count of unicast deauthentication frames in the channel.
C64 hpnicfWIPSChlStatBroadcastDeauthen	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.29	Counter64	read-only	Represents the count of broadcast deauthentication frames in the channel.
C64 hpnicfWIPSChlStatMalformed	1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.30	Counter64	read-only	Represents the count of malformed frames in the channel.
hpnicfWIPSDevStatTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14		not-accessible	The table represents the list of device statistics information.
hpnicfWIPSDevStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1		not-accessible	Each entry contains information of device statistics.
MAC hpnicfWIPSDevStatSensorMacAddr	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.1	MacAddress	not-accessible	Represents the MAC address of sensor.
MAC hpnicfWIPSDevStatDevMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.2	MacAddress	not-accessible	Represents the MAC address of the device detected by the sensor.
HPN hpnicfWIPSDevStatChannel	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.3	HpnicfWIPSChannel	not-accessible	Represents the device working channel.
C64 hpnicfWIPSDevStatTxTotalPkt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.4	Counter64	read-only	Represents the count of total frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxTotalByte	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.5	Counter64	read-only	Represents the length of total frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxBMcastPkt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.6	Counter64	read-only	Represents the count of broadcast and multicast frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxBMcastByte	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.7	Counter64	read-only	Represents the length of broadcast and multicast frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxUnicastPkt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.8	Counter64	read-only	Represents the count of unicast frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxUnicastByte	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.9	Counter64	read-only	Represents the length of unicast frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxMgmt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.10	Counter64	read-only	Represents the count of management frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxCtrl	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.11	Counter64	read-only	Represents the count of control frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxData	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.12	Counter64	read-only	Represents the count of data frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxBeacon	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.13	Counter64	read-only	Represents the count of beacon frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxRTS	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.14	Counter64	read-only	Represents the count of RTS frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxProbeRequest	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.15	Counter64	read-only	Represents the count of probe request frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxProbeResponse	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.16	Counter64	read-only	Represents the count of probe response frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxFragment	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.17	Counter64	read-only	Represents the count of fragment frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxRetry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.18	Counter64	read-only	Represents the count of retry frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxAssocRequest	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.19	Counter64	read-only	Represents the count of association request frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxAssocResponse	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.20	Counter64	read-only	Represents the count of association response frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxUnicastDisassoc	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.21	Counter64	read-only	Represents the count of unicast disassociation frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxBcastDisassoc	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.22	Counter64	read-only	Represents the count of broadcast disassociation frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxAuth	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.23	Counter64	read-only	Represents the count of authentication frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxUnicastDeauth	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.24	Counter64	read-only	Represents the count of unicast deauthentication frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxBcastDeauth	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.25	Counter64	read-only	Represents the count of broadcast deauthentication frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxEAPSuccess	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.26	Counter64	read-only	Represents the count of EAP-Success frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxEAPFailure	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.27	Counter64	read-only	Represents the count of EAP-Failure frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxEAPOLStart	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.28	Counter64	read-only	Represents the count of EAPOL-Start frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxEAPOLLogOff	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.29	Counter64	read-only	Represents the count of EAPOL-Logoff frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatTxMalformed	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.30	Counter64	read-only	Represents the count of malformed frames transmitted by the device in one channel.
C64 hpnicfWIPSDevStatRxTotalPkt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.31	Counter64	read-only	Represents the count of total frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxTotalByte	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.32	Counter64	read-only	Represents the length of total frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxUnicastPkt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.33	Counter64	read-only	Represents the count of unicast frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxUnicastByte	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.34	Counter64	read-only	Represents the length of unicast frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxMgmt	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.35	Counter64	read-only	Represents the count of management frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxCtrl	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.36	Counter64	read-only	Represents the count of control frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxData	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.37	Counter64	read-only	Represents the count of data frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxRTS	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.38	Counter64	read-only	Represents the count of RTS frames recieved by the device in one channel.
C64 hpnicfWIPSDevStatRxCTS	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.39	Counter64	read-only	Represents the count of CTS frames recieved by the device in one channel.
C64 hpnicfWIPSDevStatRxProbeRequest	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.40	Counter64	read-only	Represents the count of probe request frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxProbeResponse	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.41	Counter64	read-only	Represents the count of probe response frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxFragment	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.42	Counter64	read-only	Represents the count of fragment frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxRetry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.43	Counter64	read-only	Represents the count of retry frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxAssoRequest	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.44	Counter64	read-only	Represents the count of association request frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxAssoResponse	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.45	Counter64	read-only	Represents the count of association response frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxDisassoc	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.46	Counter64	read-only	Represents the count of disassociation frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxAuth	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.47	Counter64	read-only	Represents the count of authentication frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxDeauth	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.48	Counter64	read-only	Represents the count of deauthentication frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxEAPSuccess	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.49	Counter64	read-only	Represents the count of EAP-Success frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxEAPFailure	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.50	Counter64	read-only	Represents the count of EAP-Failure frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxEAPOLStart	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.51	Counter64	read-only	Represents the count of EAPOL-Start frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxEAPOLLogoff	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.52	Counter64	read-only	Represents the count of EAPOL-Logoff frames received by the device in one channel.
C64 hpnicfWIPSDevStatRxMalformed	1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.53	Counter64	read-only	Represents the count of malformed frames received by the device in one channel.
hpnicfWIPSCtmDeviceTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15		not-accessible	The table represents the list of device information in static and dynamic countermeasure list.
hpnicfWIPSCtmDeviceEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1		not-accessible	Each entry contains information of countermeasure device.
OCT hpnicfWIPSCtmDeviceVSD	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.1	OCTET STRING	not-accessible	Represents the VSD which the device belongs to.
MAC hpnicfWIPSCtmDeviceMAC	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.2	MacAddress	not-accessible	Represents the MAC address of countermeasure device.
INT hpnicfWIPSCtmDeviceType	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.3	INTEGER	read-only	Represents the type of countermeasure device.
INT hpnicfWIPSCtmDeviceState	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.4	INTEGER	read-only	Represents the state of countermeasure device.
TIK hpnicfWIPSCtmDeviceStartTime	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.5	TimeTicks	read-only	Represents the time when start to counter on the device.
HPN hpnicfWIPSCtmDeviceCategory	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.6	HpnicfWIPSDeviceCategoryType	read-only	Represents the category of the device.
U32 hpnicfWIPSCtmDeviceChl	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.7	Unsigned32	read-only	Represents the channel on which the device is countered.
I32 hpnicfWIPSCtmDevicePrecedence	1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.8	Integer32	read-only	Represents the precedence of the device.
hpnicfWIPSMalPktStatTable	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16		not-accessible	The table represents the list of malformed packet statistics information.
hpnicfWIPSMalPktStatEntry	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1		not-accessible	Each entry contains information of malformed pakcet.
MAC hpnicfWIPSMalPktStatSensorMAC	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.1	MacAddress	not-accessible	Represents the MAC address of sensor.
C64 hpnicfWIPSMalPktStatInvalidIELength	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.2	Counter64	read-only	Represents the count of the invalid IE length malformed packets.
C64 hpnicfWIPSMalPktStatDuplicatedIE	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.3	Counter64	read-only	Represents the count of the duplicated IE malformed packets.
C64 hpnicfWIPSMalPktStatRedundantIE	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.4	Counter64	read-only	Represents the count of the redundant IE malformed packets.
C64 hpnicfWIPSMalPktStatInvalidPktLength	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.5	Counter64	read-only	Represents the count of the invalide packet length malformed packets.
C64 hpnicfWIPSMalPktStatIllegalIBSSESS	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.6	Counter64	read-only	Represents the count of the illegal bits of representing IBSS and ESS malformed packets.
C64 hpnicfWIPSMalPktStatInvalidSourceAddr	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.7	Counter64	read-only	Represents the count of invalid source address combination malformed pakcets.
C64 hpnicfWIPSMalPktStatOverflowEAPOLKey	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.8	Counter64	read-only	Represents the count of the overflow EAPOL key malformed packets.
C64 hpnicfWIPSMalPktStatMalAuth	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.9	Counter64	read-only	Represents the count of the malformed authentication packets.
C64 hpnicfWIPSMalPktStatMalAssoReq	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.10	Counter64	read-only	Represents the count of the malformed association request packets.
C64 hpnicfWIPSMalPktStatMalHTIE	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.11	Counter64	read-only	Represents the count of the malformed High Throughput IE segment packets.
C64 hpnicfWIPSMalPktStatLargeDuration	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.12	Counter64	read-only	Represents the count of the malformed large duration packets.
C64 hpnicfWIPSMalPktStatNULLProbeRes	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.13	Counter64	read-only	Represents the count of the malformed null probe response packets.
C64 hpnicfWIPSMalPktStatInvalidDeAuthCode	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.14	Counter64	read-only	Represents the count of the malformed invalid deauthentication reason code packets.
C64 hpnicfWIPSMalPktStatInvalidDisAssoCode	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.15	Counter64	read-only	Represents the count of the malformed invalid disassociation reason code packets.
C64 hpnicfWIPSMalPktStatOverflowSSID	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.16	Counter64	read-only	Represents the count of the malformed SSID length overflow packets.
C64 hpnicfWIPSMalPktStatFatajack	1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.17	Counter64	read-only	Represents the count of FATA-Jack attack pakcets.
hpnicfWIPSNotifyGroup	1.3.6.1.4.1.11.2.14.11.15.2.118.3

RFC description

Hewlett-Packard Wireless Intrusion Prevention System MIB for detecting wireless attacks and managing intrusion prevention policies.

Start monitoring HP/Comware wireless LAN controller or access point (Wireless Intrusion Prevention System) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-WIPS-MIB