| OID symbolic | OID numeric | Type | Access | Description |
|---|
| etsysIetfBridgeMibExtMIB | 1.3.6.1.4.1.5624.1.2.31 | | | This MIB module defines a portion of the SNMP enterprise
MIBs under Enterasys Networks' enterprise OID pertaining to
proprietary extensions to the IETF BRIDGE-MIB as specified
in RFC1493. |
| etsysIetfBridgeMibExt | 1.3.6.1.4.1.5624.1.2.31.1 | | | |
| etsysIetfBridgeDot1Notifications | 1.3.6.1.4.1.5624.1.2.31.1.0 | | | |
| NTF etsysIetfBridgeDot1qFdbNewLearnedAddr | 1.3.6.1.4.1.5624.1.2.31.1.0.1 | | | This notification indicates that a new entry has been created
in the dot1qTpFdbTable with a dot1qTpFdbStatus value equal to
learned(3). |
| NTF etsysIetfBridgeDot1dSpanGuardPortBlocked | 1.3.6.1.4.1.5624.1.2.31.1.0.2 | | | This notification indicates that a bridge port has been
placed in the blocking state by the SpanGuard feature. |
| NTF etsysIetfBridgeDot1dBackupRootActivation | 1.3.6.1.4.1.5624.1.2.31.1.0.3 | | | This notification indicates that the BackupRoot feature
has activated on this bridge. When multiple spanning
trees exist the values of etsysMstpMstId,
etsysMstpBridgePriority, and etsysMstpDesignatedRoot
for the applicable spanning tree SHOULD be encoded as
well. |
| NTF etsysIetfBridgeDot1qFdbMovedAddr | 1.3.6.1.4.1.5624.1.2.31.1.0.4 | | | This notification indicates that a new entry in the
dot1qTpFdbTable with a dot1qTpFdbStatus value equal to
learned(3) has replaced an entry which had the same
dot1qTpFdbAddress but different dot1qTpFdbPort, to
indicate a dot1qTpFdbAddress has moved from one port
to another. |
| NTF etsysIetfBridgeDot1dCistLoopProtectEvent | 1.3.6.1.4.1.5624.1.2.31.1.0.5 | | | This notification indicates that a Loop Protect event
has occurred on a bridge port on the CIST. |
| etsysIetfBridgeDot1dStp | 1.3.6.1.4.1.5624.1.2.31.1.1 | | | |
| etsysIetfBridgeDot1dStpPortTable | 1.3.6.1.4.1.5624.1.2.31.1.1.1 | | not-accessible | Extensions to the table that contains port-specific
information for the Spanning Tree Protocol. |
| etsysIetfBridgeDot1dStpPortEntry | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1 | | not-accessible | A list of extensions to the information maintained
by every port about the Spanning Tree Protocol state
for that port. |
| ENA etsysIetfBridgeDot1dStpPortStpEnable | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.1 | EnabledStatus | read-write | The enabled/disabled status of the Spanning Tree
protocol on the port. |
| T/F etsysIetfBridgeDot1dStpPortSpanGuardBlocking | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.2 | TruthValue | read-write | The state of the port with respect to the SpanGuard feature.
true(1) - this port is being held in the blocking state by
the SpanGuard feature.
false(2) - this port is not being held in the blocking state
by the SpanGuard feature.
When this object has a value of true(1) setting its value
to false(2) will cause the SpanGuard feature to no longer
hold the port in the blocking state.
All other set operations on this object are undefined and
MUST NOT have any affect. |
| INT etsysIetfBridgeDot1dStpPortCistRoleValue | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.3 | INTEGER | read-only | Indicates this port's role on the CIST.
disabled -- this port has no role on the CIST.
root -- this port has the role of root port on the CIST.
designated -- this port has the role of designated
port on the CIST.
alternate -- this port has the role of alternate port
on the CIST.
backUp -- this port has the role of backup port on the CIST. |
| INT etsysIetfBridgeDot1dStpPortCistNonForwardingReason | 1.3.6.1.4.1.5624.1.2.31.1.1.1.1.4 | INTEGER | read-only | Indicates the reason why this port has been placed in a
non-forwarding state on the CIST (other than as a result
of normal Spanning Tree protocol operation).
none(1) - the port has not been placed in a non-forwarding
state due to any exceptional condition.
disputed(2) - the port has been placed in listening state
because it has a designated role and an
inferior designated BPDU has been received.
spanGuardLocked(3) - the port has been placed in blocking
state because it is configured as an
admin edge port and a BPDU has been
received.
loopProtectEvent(4) - the port has been placed in listening
or blocking state because a BPDU
timeout has occurred and the port is
awaiting reception of a type 2 BPDU
on a point-to-point link.
loopProtectAdvisory(5) - the port has been placed in
listening state because a BPDU
timeout has occurred (as with a
Loop Protect event), but this
condition may be normal because
the link partner does not support
the Loop Protect feature.
loopbackDetected(6) - the port has been placed in blocking
state because a loopback condition
has been detected. |
| INT etsysIetfBridgeDot1dStpTopChangeTrapEnable | 1.3.6.1.4.1.5624.1.2.31.1.1.2 | INTEGER | read-write | The enabled/disabled status of the Spanning Tree topology
change notification.
When this object is set to enabled(1) topology change
notifications SHOULD be generated by the agent.
When this object is set to disabled(2) topology change
notifications MUST NOT be generated by the agent.
When this object is set to edgePortDisabled(3) topology
change notifications MUST NOT be generated by the agent
for ports that are operating as edge ports, as specified
by dot1dStpPortOperEdgePort, and SHOULD be generated for
all other applicable ports. |
| ENA etsysIetfBridgeDot1dStpNewRootTrapEnable | 1.3.6.1.4.1.5624.1.2.31.1.1.3 | EnabledStatus | read-write | The enabled/disabled status of the Spanning Tree new
root notification.
When this object is set to enabled(1) new root
notifications SHOULD be generated by the agent.
When this object is set to disabled(2) new root
notifications MUST NOT be generated by the agent. |
| INT etsysIetfBridgeDot1dStpBridgePriorityDefault | 1.3.6.1.4.1.5624.1.2.31.1.1.4 | INTEGER | read-write | The version of the Spanning Tree default Bridge Priority
that is to be used by this Bridge.
stp8021d1998(1) - indicates the use of Bridge Priority
as defined in IEEE Std. 802.1D-1998.
stp8021t2001(2) - indicates the use of Bridge Priority
as defined in IEEE Std. 802.1t. |
| etsysIetfBridgeDot1dBase | 1.3.6.1.4.1.5624.1.2.31.1.2 | | | |
| etsysIetfBridgeDot1dBasePortTable | 1.3.6.1.4.1.5624.1.2.31.1.2.1 | | not-accessible | A table of port based controls. Augments the
dot1dBasePortTable. |
| etsysIetfBridgeDot1dBasePortEntry | 1.3.6.1.4.1.5624.1.2.31.1.2.1.1 | | not-accessible | The per port controls for an individual bridge port. |
| ENA etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap | 1.3.6.1.4.1.5624.1.2.31.1.2.1.1.1 | EnabledStatus | read-write | The status of the new learned address notification feature on
this port.
When etsysIetfBridgeDot1qNewLearnedAddrTrapEnable and this
object are both set to enabled the agent will generate
an etsysIetfBridgeDot1qFdbNewLearnedAddr notification for each
new entry in the dot1qTpFdbTable with a dot1qTpFdbStatus value
equal to learned(3) and a dot1qTpFdbPort value equal to this
row's dot1dBasePort value.
Setting this object to disabled will prevent the agent from
generating etsysIetfBridgeDot1qFdbNewLearnedAddr notifications
for this port.
If etsysIetfBridgeDot1qNewLearnedAddrTrapEnable is set to
disabled, setting this object to enabled will have no effect.
Notification generation is not required to match new address
rate of learning. A best effort delivery queue is acceptable. |
| ENA etsysIetfBridgeDot1dBasePortMovedAddrTrap | 1.3.6.1.4.1.5624.1.2.31.1.2.1.1.2 | EnabledStatus | read-write | The status of the moved address notification feature on
this port.
When etsysIetfBridgeDot1qMovedAddrTrapEnable and this
object are both set to enabled the agent will generate
an etsysIetfBridgeDot1qFdbMovedAddr notification for
each entry in the dot1qTpFdbTable that has a dot1qTpFdbStatus
value equal to learned(3) and a dot1qTpFdbPort value equal to
this row's dot1dBasePort value when it is detected that the
corresponding dot1qTpFdbAddress has moved to this row's
dot1dBasePort from another port.
Setting this object to disabled will prevent the agent from
generating etsysIetfBridgeDot1qFdbMovedAddr notifications
for this port.
If etsysIetfBridgeDot1qMovedAddrTrapEnable is set to
disabled, setting this object to enabled will have no effect.
Notification generation is not required to match the
dot1qTpFdbTable entry modification rate. A best effort
delivery queue is acceptable. |
| etsysIetfBridgeDot1qBase | 1.3.6.1.4.1.5624.1.2.31.1.3 | | | |
| ENA etsysIetfBridgeDot1qNewLearnedAddrTrapEnable | 1.3.6.1.4.1.5624.1.2.31.1.3.1 | EnabledStatus | read-write | The global status of the new learned address notification
feature.
When this object is set to enabled(1), the agent will generate
etsysIetfBridgeDot1qFdbNewLearnedAddr notifications for each
new address learned on ports that have their corresponding
etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap object set to
enabled(1).
If etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap is set
to disabled(2) for all ports then setting this object to
enabled(1) will not have any effect.
When this object is set to disabled(1), the agent will not
generate any etsysIetfBridgeDot1qFdbNewLearnedAddr
notifications. |
| ENA etsysIetfBridgeDot1qMovedAddrTrapEnable | 1.3.6.1.4.1.5624.1.2.31.1.3.2 | EnabledStatus | read-write | The global status of the moved address notification
feature.
When this object is set to enabled(1), the agent will
generate etsysIetfBridgeDot1qFdbMovedAddr notifications
for each moved address on ports that have their corresponding
etsysIetfBridgeDot1dBasePortMovedAddrTrap object set to
enabled(1).
If etsysIetfBridgeDot1dBasePortMovedAddrTrap is set
to disabled(2) for all ports then setting this object to
enabled(1) will not have any effect.
When this object is set to disabled(1), the agent will not
generate any etsysIetfBridgeDot1qFdbMovedAddr
notifications. |
| ENA etsysIetfBridgeDot1qStaticUcastAsMcast | 1.3.6.1.4.1.5624.1.2.31.1.3.3 | EnabledStatus | read-write | When this object is set to enabled(1), the agent will
allow unicast traffic which matches all 48 bits of a static
and the source VLAN of a multicast entry in the filter-database,
except for the multicast-bit (bit 8). This augments the behavior
defined in the IEEE 802.1Q specification.
For example, if a static multicast address is configured as
01-02-03-04-05-06, VLAN 7, frames with a destination MAC address
of either 01-02-03-04-05-06 or 00-02-03-04-05-06, received on
VLAN 7, will match this entry. |
| etsysIetfBridgeDot1dSpanGuard | 1.3.6.1.4.1.5624.1.2.31.1.4 | | | |
| ENA etsysIetfBridgeDot1dStpSpanGuardEnable | 1.3.6.1.4.1.5624.1.2.31.1.4.1 | EnabledStatus | read-write | The enabled/disabled status of the SpanGuard functionality. |
| ENA etsysIetfBridgeDot1dStpSpanGuardTrapEnable | 1.3.6.1.4.1.5624.1.2.31.1.4.2 | EnabledStatus | read-write | The enabled/disabled status of the SpanGuard Port Blocking
trap. |
| I32 etsysIetfBridgeDot1dStpSpanGuardBlockTime | 1.3.6.1.4.1.5624.1.2.31.1.4.3 | Integer32 | read-write | The number of seconds that a port will be held in the
blocking state by the SpanGuard feature. The value
zero indicates that ports will be held in the blocking
state until the entity is reset. Ports that are being
held in the blocking state can be returned to normal
service by writing the value of false(2) to their
respective etsysIetfBridgeDot1dBasePortSpanGuardBlocking
objects. |
| etsysIetfBridgeDot1dBackupRoot | 1.3.6.1.4.1.5624.1.2.31.1.5 | | | |
| ENA etsysIetfBridgeDot1dStpBackupRootEnable | 1.3.6.1.4.1.5624.1.2.31.1.5.1 | EnabledStatus | read-write | The enabled/disabled status of the Backup Root functionality
on the Common and Internal Spanning Tree. |
| ENA etsysIetfBridgeDot1dStpBackupRootTrapEnable | 1.3.6.1.4.1.5624.1.2.31.1.5.2 | EnabledStatus | read-write | The enabled/disabled status of the Backup Root activation
trap. |
| etsysIetfBridgeDot1dLoopProtect | 1.3.6.1.4.1.5624.1.2.31.1.6 | | | |
| etsysIetfBridgeDot1dStpLoopProtectPortTable | 1.3.6.1.4.1.5624.1.2.31.1.6.1 | | not-accessible | A table of port based information for the Loop Protect
feature. |
| etsysIetfBridgeDot1dStpLoopProtectPortEntry | 1.3.6.1.4.1.5624.1.2.31.1.6.1.1 | | not-accessible | The per port information for the Loop Protect feature. |
| ENA etsysIetfBridgeDot1dStpLoopProtectPortCistEnable | 1.3.6.1.4.1.5624.1.2.31.1.6.1.1.1 | EnabledStatus | read-write | The enabled/disabled status of the Loop Protect
feature for this port on the Common and Internal
Spanning Tree (CIST). |
| T/F etsysIetfBridgeDot1dStpLoopProtectPortCistBlocking | 1.3.6.1.4.1.5624.1.2.31.1.6.1.1.2 | TruthValue | read-write | The state of the port on the CIST with respect to
the Loop Protect feature.
true(1) - this port is being held in the blocking state
by the Loop Protect feature.
false(2) - this port is not being held in the blocking
state by the Loop Protect feature.
When this object has a value of true(1) setting its value
to false(2) will cause the Loop Protect feature to no longer
hold the port in the blocking state.
All other set operations on this object are undefined and
MUST NOT have any effect. |
| T/F etsysIetfBridgeDot1dStpLoopProtectPortPartnerCapable | 1.3.6.1.4.1.5624.1.2.31.1.6.1.1.3 | TruthValue | read-write | The capability of the port's link partner with respect to
the Loop Protect feature.
true(1) - the partner supports the Loop Protect feature.
false(2) - the partner does not support the Loop Protect
feature.
When this object has a value of true(1) the full functionality
of the Loop Protect feature will be utilized on the port.
When this object has a value of false(2) limited Loop Protect
functionality will be utilized on the port. |
| U32 etsysIetfBridgeDot1dStpLoopProtectEventThreshold | 1.3.6.1.4.1.5624.1.2.31.1.6.2 | Unsigned32 | read-write | The number of Loop Protect events that must occur on a
given port on a given Spanning Tree instance within the
interval defined by etsysIetfBridgeDot1dLoopProtectEventWindow
for the port to become locked (i.e., held indefinitely in
the blocking state). If this object is set to zero
no locking will be performed. |
| U32 etsysIetfBridgeDot1dStpLoopProtectEventWindow | 1.3.6.1.4.1.5624.1.2.31.1.6.3 | Unsigned32 | read-write | This time value, measured in units of seconds, specifies
the length of the interval during which Loop Protect events
are counted for a given port on a given Spanning Tree
instance. |
| ENA etsysIetfBridgeDot1dStpLoopProtectEventTrapEnable | 1.3.6.1.4.1.5624.1.2.31.1.6.4 | EnabledStatus | read-write | The enabled/disabled status of Loop Protect event
notification. |
| etsysIetfBridgeConformance | 1.3.6.1.4.1.5624.1.2.31.2 | | | |
| etsysIetfBridgeGroups | 1.3.6.1.4.1.5624.1.2.31.2.1 | | | |
| etsysIetfBridgeStpPort | 1.3.6.1.4.1.5624.1.2.31.2.1.1 | | | A collection of objects relating to per Port Spanning
Tree information. |
| etsysIetfBridgeStpTrap | 1.3.6.1.4.1.5624.1.2.31.2.1.2 | | | A collection of objects relating to Spanning Tree
SNMP Trap control. |
| etsysIetfBridgeBase | 1.3.6.1.4.1.5624.1.2.31.2.1.3 | | | A collection of objects relating to bridge
configuration information. |
| etsysIetfBridgeDot1qFdbNewAddrNotification | 1.3.6.1.4.1.5624.1.2.31.2.1.4 | | | The New Learned Address Notification. |
| etsysIetfBridgeDot1dStpBridgePriority | 1.3.6.1.4.1.5624.1.2.31.2.1.5 | | | An object for support of legacy bridge priorities. |
| etsysIetfBridgeSpanGuard | 1.3.6.1.4.1.5624.1.2.31.2.1.6 | | | A collection of objects relating to the SpanGuard
feature. |
| etsysIetfBridgeSpanGuardNotification | 1.3.6.1.4.1.5624.1.2.31.2.1.7 | | | The SpanGuard Port Blocked Notification. |
| etsysIetfBridgeBackupRoot | 1.3.6.1.4.1.5624.1.2.31.2.1.8 | | | A collection of objects relating to the BackupRoot
feature. |
| etsysIetfBridgeBackupRootNotification | 1.3.6.1.4.1.5624.1.2.31.2.1.9 | | | The Backup Root Activation Notification. |
| etsysIetfBridgePortCistRoleValue | 1.3.6.1.4.1.5624.1.2.31.2.1.10 | | | The role of the port with respect to the CIST. |
| etsysIetfBridgeMovedAddr | 1.3.6.1.4.1.5624.1.2.31.2.1.11 | | | A collection of objects relating to enabling moved address
notifications. |
| etsysIetfBridgeDot1qFdbMovedAddrNotification | 1.3.6.1.4.1.5624.1.2.31.2.1.12 | | | The Moved Address Notification. |
| etsysIetfBridgeLoopProtect | 1.3.6.1.4.1.5624.1.2.31.2.1.13 | | | A collection of objects relating to the Loop Protect
feature. |
| etsysIetfBridgeLoopProtectNotification | 1.3.6.1.4.1.5624.1.2.31.2.1.14 | | | The Loop Protect Event Notification for the CIST. |
| etsysIetfBridgeStpCistNonForwardingReason | 1.3.6.1.4.1.5624.1.2.31.2.1.15 | | | An object that indicates the reason for an exceptional
non-forwarding condition per port on the CIST. |
| etsysIetfBridgeStaticUcastAsMcast | 1.3.6.1.4.1.5624.1.2.31.2.1.16 | | | A collection of objects pertaining to the transmission of
unicast packets received by the device. |
| etsysIetfBridgeCompliances | 1.3.6.1.4.1.5624.1.2.31.2.2 | | | |
| etsysIetfBridgeCompliance | 1.3.6.1.4.1.5624.1.2.31.2.2.1 | | | The compliance statement for devices that support the
IETF BRIDGE-MIB Extension MIB. |
| etsysIetfBridgeStaticUcastAsMcastCompliance | 1.3.6.1.4.1.5624.1.2.31.2.2.2 | | | The compliance statement for devices that support
the ability to transmit unicast frames as multicast frames. |
