All MIBs › ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB › etsysIetfBridgeDot1qMovedAddrTrapEnable
etsysIetfBridgeDot1qMovedAddrTrapEnable
Module: ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB
OID (symbolic): ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB::etsysIetfBridgeDot1qMovedAddrTrapEnable
OID (numeric): 1.3.6.1.4.1.5624.1.2.31.1.3.2
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The global status of the moved address notification feature.
When this object is set to enabled(1), the agent will generate etsysIetfBridgeDot1qFdbMovedAddr notifications for each moved address on ports that have their corresponding etsysIetfBridgeDot1dBasePortMovedAddrTrap object set to enabled(1).
If etsysIetfBridgeDot1dBasePortMovedAddrTrap is set to disabled(2) for all ports then setting this object to enabled(1) will not have any effect.
When this object is set to disabled(1), the agent will not generate any etsysIetfBridgeDot1qFdbMovedAddr notifications.
What is etsysIetfBridgeDot1qMovedAddrTrapEnable?
This read-write enumeration is the bridge-wide master switch for moved-address notifications, working the same two-level way as etsysIetfBridgeDot1qNewLearnedAddrTrapEnable but for addresses that migrate between ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.31.1.3.2 snmpwalk -v2c -c public <target> ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB::etsysIetfBridgeDot1qMovedAddrTrapEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.31.1.3.2.1 snmpget -v2c -c public <target> ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB::etsysIetfBridgeDot1qMovedAddrTrapEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.31.1.3.2.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (BRIDGE-MIB extensions: SpanGuard/Loop Protect) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB::etsysIetfBridgeDot1qMovedAddrTrapEnable OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (BRIDGE-MIB extensions: SpanGuard/Loop Protect) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.31 | etsysIetfBridgeMibExtMIB | ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.31.1 | etsysIetfBridgeMibExt | ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.31.1.3 | etsysIetfBridgeDot1qBase | ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.31.1.3.2 | etsysIetfBridgeDot1qMovedAddrTrapEnable | ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB |