All MIBs › ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB › etsysIetfBridgeDot1qStaticUcastAsMcast
etsysIetfBridgeDot1qStaticUcastAsMcast
Module: ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB
OID (symbolic): ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB::etsysIetfBridgeDot1qStaticUcastAsMcast
OID (numeric): 1.3.6.1.4.1.5624.1.2.31.1.3.3
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: When this object is set to enabled(1), the agent will allow unicast traffic which matches all 48 bits of a static and the source VLAN of a multicast entry in the filter-database, except for the multicast-bit (bit 8). This augments the behavior defined in the IEEE 802.1Q specification.
For example, if a static multicast address is configured as 01-02-03-04-05-06, VLAN 7, frames with a destination MAC address of either 01-02-03-04-05-06 or 00-02-03-04-05-06, received on VLAN 7, will match this entry.
What is etsysIetfBridgeDot1qStaticUcastAsMcast?
This read-write enumeration, when enabled, lets a statically configured multicast filter-database entry also match unicast frames that share the same 48-bit address pattern except for the multicast bit, letting an admin filter both with one static entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.31.1.3.3 snmpwalk -v2c -c public <target> ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB::etsysIetfBridgeDot1qStaticUcastAsMcast
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.31.1.3.3.1 snmpget -v2c -c public <target> ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB::etsysIetfBridgeDot1qStaticUcastAsMcast.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.31.1.3.3.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (BRIDGE-MIB extensions: SpanGuard/Loop Protect) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB::etsysIetfBridgeDot1qStaticUcastAsMcast OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (BRIDGE-MIB extensions: SpanGuard/Loop Protect) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.31 | etsysIetfBridgeMibExtMIB | ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.31.1 | etsysIetfBridgeMibExt | ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.31.1.3 | etsysIetfBridgeDot1qBase | ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.31.1.3.3 | etsysIetfBridgeDot1qStaticUcastAsMcast | ENTERASYS-IETF-BRIDGE-MIB-EXT-MIB |