All MIBs › ELTEX-MES-IpRouter
Category: Vendor: Eltex
Description: Eltex MES IP router MIB for managing Layer 3 routing functions, static routes, and routing protocol configurations.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ELTEX-MES-IpRouter?
ELTEX-MES-IpRouter is a vendor-specific Eltex Networks MIB covering Layer 3 routing functions on MES-series switches, including static routes and routing protocol configuration per its short description. The concrete data grounded in the extracted source specifically covers OSPF interface authentication configuration, an important piece of securing routing adjacencies. Monitoring this data lets an admin verify the software/configuration status of OSPF authentication on each routed interface, since a misconfigured or missing authentication key is a common cause of failed OSPF adjacencies and routing instability. As an OSPF-related module it inherently depends on standard OSPF (RFC 2328-family) concepts for authentication and adjacency formation. It is typically deployed on Eltex MES-series Layer 3 switches/routers running OSPF within an enterprise or service-provider access network. Network engineers evaluating or troubleshooting this functionality can download the ELTEX-MES-IpRouter file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ELTEX-MES-IpRouter. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Eltex MES-series router/L3 switch
Monitoring Examples
eltOspfAuthTable/eltOspfAuthEntry keyed by eltOspfIfIpAddress and eltOspfAuthKeyId stores eltOspfAuthKey and eltOspfAuthStatus, letting an admin verify OSPF neighbor authentication keys are correctly provisioned per interface. A mismatched, missing, or disabled (via eltOspfAuthStatus) authentication key on one side of a link would cause that interface's OSPF adjacency to fail to form, a common troubleshooting scenario when a routing neighbor unexpectedly drops.
What Can Be Monitored
- OSPF interface authentication key configuration
- OSPF authentication key ID
- OSPF authentication row status
- OSPF-authenticated interface identification
Imported Objects
From ELTEX-MES-IP
| eltMesOspf | OBJECT-IDENTITY |
From SNMPv2-SMI
| IpAddress | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus |
OIDs
RFC description
Vendor-specific MIB for Eltex MES (Managed Ethernet Switch) IP Router functionality; defines objects for routing configuration and IP-based network services on Eltex switches.
Start monitoring Eltex MES-series router/L3 switch (OSPF interface authentication) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.