E5-120-TRAPS-MIB

All MIBs › E5-120-TRAPS-MIB

Category: Alarm and Event Management, Domain: DSL/xPON, Vendor: Calix

Description: Trap definitions for the Calix E5-120 access platform providing event and threshold-crossing notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is E5-120-TRAPS-MIB?

E5-120-TRAPS-MIB is a legacy proprietary MIB (built on E5-120-IESCOMMON-MIB/E5-120-MIB/IEEE8021-CFM-MIB) defining notifications for the E5-120 platform. Its objects cover an alarm-input index/name, MAC anti-spoofing original/new/detected-MAC values, alarm original/new severity and configuration ID, a CFM continuity-check error cause, a hardware-monitor-failure flag, MAC anti-spoofing/alarm-cutoff/alarm-clear enable flags, a login-failure flag, an alarm-severity-change notification, a CFM-CC-error notification, and an alarm table/notification (object class, up to four instance identifiers). As a notification MIB it lets an administrator get alerted on hardware faults, MAC anti-spoofing detections, and CFM continuity-check errors on an E5-120 platform device. It is deployed on E5-120 platform equipment. Engineers can download the E5-120-TRAPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in E5-120-TRAPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

E5-120 platform equipment

Monitoring Examples

An administrator receives sysMacAntiSpoofing and reads sysMacAntiSpoofMAC to identify a spoofed MAC address detected on an E5-120 platform device.

What Can Be Monitored

hardware faults, MAC anti-spoofing detections, and CFM errors

Imported Objects

From E5-120-IESCOMMON-MIB

iesChassisId	OBJECT-TYPE
iesSlotId	OBJECT-TYPE

From E5-120-MIB

e5x120

OBJECT-IDENTITY

From IEEE8021-CFM-MIB

dot1agCfmMdMdLevel	OBJECT-TYPE
dot1agCfmMepIdentifier	OBJECT-TYPE
dot1agCfmVlanPrimaryVid	OBJECT-TYPE

From RFC1213-MIB

DisplayString
ifIndex

From SNMPv2-SMI

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
trap	1.3.6.1.4.1.6321.1.2.3.3.12
object	1.3.6.1.4.1.6321.1.2.3.3.12.1
INT eqptAlarmInputIndex	1.3.6.1.4.1.6321.1.2.3.3.12.1.2	INTEGER	read-only	The index of alarm input.
STR eqptAlarmInputName	1.3.6.1.4.1.6321.1.2.3.3.12.1.8	DisplayString	read-only	The Name of alarm input.
INT sysMacAntiSpoofOrig	1.3.6.1.4.1.6321.1.2.3.3.12.1.9	INTEGER	read-only	The Original port of Mac-AntiSpoofing.
INT sysMacAntiSpoofNew	1.3.6.1.4.1.6321.1.2.3.3.12.1.10	INTEGER	read-only	The New port of Mac-AntiSpoofing.
STR sysMacAntiSpoofMAC	1.3.6.1.4.1.6321.1.2.3.3.12.1.11	DisplayString	read-only	The MAC of Mac-AntiSpoofing.
INT sysAlarmOrigSeverity	1.3.6.1.4.1.6321.1.2.3.3.12.1.12	INTEGER	read-only	The original severity of alarm.
INT sysAlarmNewSeverity	1.3.6.1.4.1.6321.1.2.3.3.12.1.13	INTEGER	read-only	The new severity of alarm.
INT sysAlarmConfId	1.3.6.1.4.1.6321.1.2.3.3.12.1.14	INTEGER	read-only	The changed severity of alarm condition ID. 5000:vdslLine_up 5001:vdslLine_down 5002:vdsl_tca_lol 5003:vdsl_tca_lof 5004:vdsl_tca_los 5005:vdsl_tca_lop 5006:vdsl_tca_es 5007:vdsl_tca_ses 5008:vdsl_tca_uas 5009:xd_xtuc_loftrap 5010:xd_xtuc_lostrap 5011:xd_xtur_loftrap 5012:xd_xtur_lostrap 5013:xd_xtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:eqptAlm_input2 10009:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 15006:sysHost_terminate 20000:enetUp 20001:enetDown 30000:cfmError
INT intfCfmCcmErrorCause	1.3.6.1.4.1.6321.1.2.3.3.12.1.55	INTEGER	read-only
equipment	1.3.6.1.4.1.6321.1.2.3.3.12.3
NTF eqptHWMonitorFailure	1.3.6.1.4.1.6321.1.2.3.3.12.3.1			Hardware monitor diagnosis is failed.
systrap	1.3.6.1.4.1.6321.1.2.3.3.12.4
NTF sysMacAntiSpoofing	1.3.6.1.4.1.6321.1.2.3.3.12.4.1			MAC Anti-spoofing.
NTF sysAlarmCutoffEnable	1.3.6.1.4.1.6321.1.2.3.3.12.4.2			Alarm cutoff is activated.
NTF sysAlarmClearEnable	1.3.6.1.4.1.6321.1.2.3.3.12.4.3			Alarm clear is activated.
NTF sysLoginFailure	1.3.6.1.4.1.6321.1.2.3.3.12.4.4			User login is failed.
NTF sysAlarmSvrtyChange	1.3.6.1.4.1.6321.1.2.3.3.12.4.5			Alarm severity is changed.
interface	1.3.6.1.4.1.6321.1.2.3.3.12.8
NTF cfmCcmError	1.3.6.1.4.1.6321.1.2.3.3.12.8.1
e5Alarm	1.3.6.1.4.1.6321.1.2.3.3.12.9
e5AlarmTable	1.3.6.1.4.1.6321.1.2.3.3.12.9.1		not-accessible	This table holds all the active alarms
e5AlarmEntry	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1		not-accessible	List of attributes regarding alarm table
INT e5AlarmObjectClass	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.1	INTEGER	read-only	Object Class for an alarm
INT e5AlarmObjectInstance1	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.2	INTEGER	read-only	Object instance for an alarm, level 1
INT e5AlarmObjectInstance2	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.3	INTEGER	read-only	Object instance for an alarm, level 2
INT e5AlarmObjectInstance3	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.4	INTEGER	read-only	Object instance for an alarm, level 3
INT e5AlarmObjectInstance4	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.5	INTEGER	read-only	Object instance for an alarm, level 4
INT e5AlarmObjectInstance5	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.6	INTEGER	read-only	Object instance for an alarm, level 5
INT e5AlarmObjectInstance6	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.7	INTEGER	read-only	Object instance for an alarm, level 6
INT e5AlarmObjectInstance7	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.8	INTEGER	read-only	Object instance for an alarm, level 7
INT e5AlarmObjectInstance8	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.9	INTEGER	read-only	Object instance for an alarm, level 8
INT e5AlarmType	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.10	INTEGER	read-only	Unique type for an alarm
INT e5AlarmSeverity	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.11	INTEGER	read-only	Severity of the alarm
OCT e5AlarmTimeStamp	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.12	OCTET STRING	read-only	Timestamp indicating the set/clear time of the alarm
INT e5AlarmServiceAffecting	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.13	INTEGER	read-only	Indicated the nature of the alarm i.e. service affecting or not
INT e5AlarmLocationInfo	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.14	INTEGER	read-only
OCT e5AlarmText	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.15	OCTET STRING	read-only	Alarm description
INT e5AlarmTime	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.16	INTEGER	read-only	UTC time
OCT e5AlarmCliObject	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.17	OCTET STRING	read-only	The short CLI name for the object class and instance
INT e5AlarmSecObjectClass	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.18	INTEGER	read-only	Secondary Object Class for an alarm
INT e5AlarmSecObjectInstance1	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.19	INTEGER	read-only	Secondary object instance for an alarm, level 1
INT e5AlarmSecObjectInstance2	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.20	INTEGER	read-only	Secondary object instance for an alarm, level 2
INT e5AlarmSecObjectInstance3	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.21	INTEGER	read-only	Secondary object instance for an alarm, level 3
INT e5AlarmSecObjectInstance4	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.22	INTEGER	read-only	Secondary object instance for an alarm, level 4
INT e5AlarmSecObjectInstance5	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.23	INTEGER	read-only	Secondary object instance for an alarm, level 5
INT e5AlarmSecObjectInstance6	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.24	INTEGER	read-only	Secondary object instance for an alarm, level 6
INT e5AlarmSecObjectInstance7	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.25	INTEGER	read-only	Secondary object instance for an alarm, level 7
INT e5AlarmSecObjectInstance8	1.3.6.1.4.1.6321.1.2.3.3.12.9.1.1.26	INTEGER	read-only	Secondary object instance for an alarm, level 8
NTF e5AlarmNotify	1.3.6.1.4.1.6321.1.2.3.3.12.9.2			E5 device alarm notification.

RFC description

Defines trap definitions for E5-120 network devices, including alarms, system events, and interface notifications.

Start monitoring Calix E5-120 access platform (alarm/trap notifications) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download E5-120-TRAPS-MIB

What Is E5-120-TRAPS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description