All MIBs › E5-120-MIB
Category: DSL and Broadband, Domain: DSL/xPON, Vendor: Calix
Description:
Core management MIB for the Calix E5-120 multi-service access platform covering system configuration and status monitoring.
Imported Objects
From BRIDGE-MIB
| BridgeId | |
| MacAddress | |
| Timeout | |
| dot1dBasePort | OBJECT-TYPE |
From IEEE8021-CFM-MIB
| dot1agCfmMaIndex | OBJECT-TYPE |
| dot1agCfmMdIndex | OBJECT-TYPE |
| dot1agCfmMepIdentifier | OBJECT-TYPE |
From P-BRIDGE-MIB
| dot1dTrafficClass | OBJECT-TYPE |
From Q-BRIDGE-MIB
| PortList | |
| VlanIndex | |
| dot1qVlanIndex | OBJECT-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString | |
| PhysAddress | |
| ifIndex |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| IpAddress | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION |
What Is E5-120-MIB?
E5-120-MIB is Calix's product-specific MIB for the E5-120 multi-service access platform, a carrier-grade broadband access system used to deliver combined voice, video, and data services. It covers the core management OID hierarchy for the platform, encompassing system configuration and general status monitoring objects, plus at least one statistics table related to internal access/aggregation function (macffStats) suggesting per-interface or per-function traffic/error counters. Its role in monitoring spans both hardware and software status: as a core platform MIB it would typically expose system-level indicators such as uptime, module/card presence, and general system health, alongside the performance-counter data implied by macffStats for traffic engineering and fault diagnosis. Browsing E5-120-MIB in a MIB Browser surfaces the macffStats table alongside the platform's system configuration and status branches. As a Calix access-platform MIB, it likely works alongside standard IF-MIB and Calix's broader family of service-specific MIBs (e.g., for DSL, GPON, or Ethernet line cards) rather than functioning in isolation. It is deployed by broadband service providers operating Calix E5-120 access nodes in central offices or remote terminal locations.
IPNetwork Monitor allows you to monitor SNMP objects defined in E5-120-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- MAC forwarding function (macffStats) statistics
- system configuration status
- platform/chassis status
Supported Devices
- Calix E5-120 multi-service access platform
Monitoring Examples
The only concrete sample object available, macffStats, points to a statistics table likely tracking counters for a MAC forwarding function (MACFF) subsystem on the E5-120 chassis; an administrator would poll this table to check for abnormal packet drop, error, or forwarding-rate counters that could indicate a switching fabric or line-card issue. Because the broader system configuration/status objects were not enumerated in the provided sample, a full monitoring picture would also require walking the platform's general system-status branch for chassis and card health. A rising error count in macffStats compared to a baseline would be a signal of a data-plane or hardware fault on the access platform.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| calixNetworks | 1.3.6.1.4.1.6321 | |||
| calixRegistrations | 1.3.6.1.4.1.6321.1 | |||
| calixProducts | 1.3.6.1.4.1.6321.1.2 | |||
| e5x100 | 1.3.6.1.4.1.6321.1.2.3 | |||
| e5x120 | 1.3.6.1.4.1.6321.1.2.3.3 | |||
| alarmconf | 1.3.6.1.4.1.6321.1.2.3.3.2 | |||
| INT alarmOps | 1.3.6.1.4.1.6321.1.2.3.3.2.1 | INTEGER | read-write | The manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. The various bit positions are: BIT 1: clear BIT 2: cutoff |
| alarmConfTable | 1.3.6.1.4.1.6321.1.2.3.3.2.2 | not-accessible | This table includes alarm configuration. | |
| alarmConfEntry | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1 | not-accessible | An entry in alarmConfTable. | |
| INT alarmConfId | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.1 | INTEGER | read-only | 5000:vdslLine_up 5001:vdslLine_down 5002:vdsl_tca_lol 5003:vdsl_tca_lof 5004:vdsl_tca_los 5005:vdsl_tca_lop 5006:vdsl_tca_es 5007:vdsl_tca_ses 5008:vdsl_tca_uas 5009:xd_xtuc_loftrap 5010:xd_xtuc_lostrap 5011:xd_xtur_loftrap 5012:xd_xtur_lostrap 5013:xd_xtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:eqptAlm_input2 10009:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 15006:sysHost_terminate 20000:enetUp 20001:enetDown 30000:cfmError |
| INT alarmConfFacility | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.2 | INTEGER | read-write | Alarm facility. |
| INT alarmConfTarget | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.3 | INTEGER | read-write | The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog |
| INT alarmConfSeverity | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.4 | INTEGER | read-write | Alarm severity |
| INT alarmConfClearable | 1.3.6.1.4.1.6321.1.2.3.3.2.2.1.5 | INTEGER | read-write | Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear. |
| alarmCurrTable | 1.3.6.1.4.1.6321.1.2.3.3.2.3 | not-accessible | This table includes current alarm information. | |
| alarmCurrEntry | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1 | not-accessible | An entry in alarmCurrTable. | |
| INT alarmCurrIndex | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.1 | INTEGER | read-only | Index of the alarm. |
| TIK alarmCurrOccurTime | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.2 | TimeTicks | read-only | Alarm occurence time (in hundredths of a second) since the system was last re-initialized. |
| OID alarmCurrTrapOid | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.3 | OBJECT IDENTIFIER | read-only | Trap OID of the alarm. |
| INT alarmCurrParam1 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.4 | INTEGER | read-only | The 1st parameter of the alarm. |
| INT alarmCurrParam2 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.5 | INTEGER | read-only | The 2nd parameter of the alarm. |
| INT alarmCurrParam3 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.6 | INTEGER | read-only | The 3rd parameter of the alarm. |
| INT alarmCurrParam4 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.7 | INTEGER | read-only | The 4th parameter of the alarm. |
| INT alarmCurrParam5 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.8 | INTEGER | read-only | The 5th parameter of the alarm. |
| INT alarmCurrParam6 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.9 | INTEGER | read-only | The 6th parameter of the alarm. |
| INT alarmCurrParam7 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.10 | INTEGER | read-only | The 7th parameter of the alarm. |
| INT alarmCurrParam8 | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.11 | INTEGER | read-only | The 8th parameter of the alarm. |
| STR alarmCurrTimeDescr | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.12 | DisplayString | read-only | The string representation of occurence time (YYYY/MM/DD HH:MM:SS). |
| INT alarmCurrSeverity | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.13 | INTEGER | read-only | The severity of the alarm. |
| STR alarmCurrDescr | 1.3.6.1.4.1.6321.1.2.3.3.2.3.1.14 | DisplayString | read-only | The description of the alarm. |
| alarmSeverityPortTable | 1.3.6.1.4.1.6321.1.2.3.3.2.4 | not-accessible | This table includes the configuration of alarm reporting severity threshold for each port. | |
| alarmSeverityPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.2.4.1 | not-accessible | An entry in alarmSeverityPortTable. | |
| INT severityThresh | 1.3.6.1.4.1.6321.1.2.3.3.2.4.1.1 | INTEGER | read-write | The minimum alarm severity that is reported. |
| diagnostic | 1.3.6.1.4.1.6321.1.2.3.3.4 | |||
| selt | 1.3.6.1.4.1.6321.1.2.3.3.4.3 | |||
| INT seltTarget | 1.3.6.1.4.1.6321.1.2.3.3.4.3.1 | INTEGER | read-write | IfIndex of the port which would be performed single end loopback test. |
| INT seltOps | 1.3.6.1.4.1.6321.1.2.3.3.4.3.2 | INTEGER | read-write | The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed. |
| STR seltStatus | 1.3.6.1.4.1.6321.1.2.3.3.4.3.3 | DisplayString | read-only | Status description of the selt result. |
| INT seltCableType | 1.3.6.1.4.1.6321.1.2.3.3.4.3.4 | INTEGER | read-only | The cable type that selt result indicates. |
| INT seltLoopEstimateLengthFt | 1.3.6.1.4.1.6321.1.2.3.3.4.3.5 | INTEGER | read-only | The estimated loop length that selt result indicates. |
| INT seltLoopEstimateLengthMeter | 1.3.6.1.4.1.6321.1.2.3.3.4.3.6 | INTEGER | read-only | The estimated loop length that selt result indicates. |
| ldm | 1.3.6.1.4.1.6321.1.2.3.3.4.4 | |||
| INT ldmTarget | 1.3.6.1.4.1.6321.1.2.3.3.4.4.1 | INTEGER | read-write | IfIndex of the port which would be performed ldm test. |
| INT ldmOps | 1.3.6.1.4.1.6321.1.2.3.3.4.4.2 | INTEGER | read-write | The manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed. |
| STR ldmStatus | 1.3.6.1.4.1.6321.1.2.3.3.4.4.3 | DisplayString | read-only | Status description of ldm test result. |
| INT ldmXtucLoopAttenuation | 1.3.6.1.4.1.6321.1.2.3.3.4.4.4 | INTEGER | read-only | Loop Attenuation. |
| INT ldmXtucSignalAttenuation | 1.3.6.1.4.1.6321.1.2.3.3.4.4.5 | INTEGER | read-only | Signal Attenuation. |
| INT ldmXtucSignalMargin | 1.3.6.1.4.1.6321.1.2.3.3.4.4.6 | INTEGER | read-only | Signal Margin. |
| INT ldmXtucAggregateTxPower | 1.3.6.1.4.1.6321.1.2.3.3.4.4.7 | INTEGER | read-only | Actual Aggregate Transmit Power. |
| U32 ldmXtucAttainableBitRate | 1.3.6.1.4.1.6321.1.2.3.3.4.4.8 | Unsigned32 | read-only | Attainable Bit Rate. |
| INT ldmXturLoopAttenuation | 1.3.6.1.4.1.6321.1.2.3.3.4.4.9 | INTEGER | read-only | Loop Attenuation. |
| INT ldmXturSignalAttenuation | 1.3.6.1.4.1.6321.1.2.3.3.4.4.10 | INTEGER | read-only | Signal Attenuation. |
| INT ldmXturSignalMargin | 1.3.6.1.4.1.6321.1.2.3.3.4.4.11 | INTEGER | read-only | Signal Margin. |
| INT ldmXturAggregateTxPower | 1.3.6.1.4.1.6321.1.2.3.3.4.4.12 | INTEGER | read-only | Actual Aggregate Transmit Power. |
| U32 ldmXturAttainableBitRate | 1.3.6.1.4.1.6321.1.2.3.3.4.4.13 | Unsigned32 | read-only | Attainable Bit Rate. |
| INT ldmXtucNumOfSubcarriersPerPort | 1.3.6.1.4.1.6321.1.2.3.3.4.4.14 | INTEGER | read-only | The number of subcarriers per port for ATU-C. |
| INT ldmXturNumOfSubcarriersPerPort | 1.3.6.1.4.1.6321.1.2.3.3.4.4.15 | INTEGER | read-only | The number of subcarriers per port for ATU-R. |
| INT ldmXtucHlinScale | 1.3.6.1.4.1.6321.1.2.3.3.4.4.16 | INTEGER | read-only | Scale of Hlin. |
| OCT ldmXtucHlinReal1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.17 | OCTET STRING | read-only | The object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucHlinReal2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.18 | OCTET STRING | read-only | The object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucHlinImage1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.19 | OCTET STRING | read-only | The object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucHlinImage2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.20 | OCTET STRING | read-only | The object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucHlog1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.21 | OCTET STRING | read-only | The object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucHlog2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.22 | OCTET STRING | read-only | The object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucQln1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.23 | OCTET STRING | read-only | The object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucQln2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.24 | OCTET STRING | read-only | The object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucSnr1 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.25 | OCTET STRING | read-only | The object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucSnr2 | 1.3.6.1.4.1.6321.1.2.3.3.4.4.26 | OCTET STRING | read-only | The object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| INT ldmXturHlinScale | 1.3.6.1.4.1.6321.1.2.3.3.4.4.27 | INTEGER | read-only | Scale of Hlin. |
| OCT ldmXturHlinReal | 1.3.6.1.4.1.6321.1.2.3.3.4.4.28 | OCTET STRING | read-only | Real part of Hlin. Each subcarrier takes two octets to store the value. |
| OCT ldmXturHlinImage | 1.3.6.1.4.1.6321.1.2.3.3.4.4.29 | OCTET STRING | read-only | Image part of Hlin. Each subcarrier takes two octets to store the value. |
| OCT ldmXturHlog | 1.3.6.1.4.1.6321.1.2.3.3.4.4.30 | OCTET STRING | read-only | Hlog of subcarrier. Each subcarrier takes two octets to store the value. |
| OCT ldmXturQln | 1.3.6.1.4.1.6321.1.2.3.3.4.4.31 | OCTET STRING | read-only | QLN of subcarrier. Each subcarrier takes two octets to store the value. |
| OCT ldmXturSnr | 1.3.6.1.4.1.6321.1.2.3.3.4.4.32 | OCTET STRING | read-only | SNR of subcarrier. Each subcarrier takes two octets to store the value. |
| OCT ldmXtucHlogGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.33 | OCTET STRING | read-only | The Hlog group factor of ATU-C. |
| OCT ldmXtucQlnGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.34 | OCTET STRING | read-only | The Qln group factor of ATU-C. |
| OCT ldmXtucSnrGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.35 | OCTET STRING | read-only | The Snr group factor of ATU-C. |
| OCT ldmXturHlogGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.36 | OCTET STRING | read-only | The Hlog group factor of ATU-R. |
| OCT ldmXturQlnGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.37 | OCTET STRING | read-only | The Qln group factor of ATU-R. |
| OCT ldmXturSnrGroupFactor | 1.3.6.1.4.1.6321.1.2.3.3.4.4.38 | OCTET STRING | read-only | The Snr group factor of ATU-R. |
| multicast | 1.3.6.1.4.1.6321.1.2.3.3.7 | |||
| INT igmpEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.1 | INTEGER | read-write | Enable/disable IGMP protocol. |
| mcastBandwidth | 1.3.6.1.4.1.6321.1.2.3.3.7.4 | |||
| INT mcastDefaultBandwidth | 1.3.6.1.4.1.6321.1.2.3.3.7.4.1 | INTEGER | read-write | Default bandwidth requirement for a multicast channel. |
| INT maxNumOfMcastBw | 1.3.6.1.4.1.6321.1.2.3.3.7.4.2 | INTEGER | read-only | The maximum number of row entries that user can create in mcastBwTable. |
| mcastBwTable | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3 | not-accessible | This table defines bandwidth budget for a range of multicast IP channels. | |
| mcastBwEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1 | not-accessible | An entry of mcastBwTable. | |
| INT mcastBwIndex | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.1 | INTEGER | read-only | The index which specify the entry. |
| IP mcastBwStartIp | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.2 | IpAddress | read-only | The start multicast IP of the bandwidth control range. |
| IP mcastBwEndIp | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.3 | IpAddress | read-only | The end multicast IP of the bandwidth control range. |
| INT mcastBwBandwidth | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.4 | INTEGER | read-create | The bandwidth budget for the multicast IP channels. |
| ROW mcastBwRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.5 | RowStatus | read-create | The row status of the entry. |
| mcastBwPortTable | 1.3.6.1.4.1.6321.1.2.3.3.7.4.4 | not-accessible | This table specify the multicast bandwidth control of the port. | |
| mcastBwPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1 | not-accessible | An entry of mcastBwPortTable. | |
| INT mcastBwPortEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1.1 | INTEGER | read-write | Enable/disable multicast bandwidth control for a port. |
| INT mcastBwPortBandwidth | 1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1.2 | INTEGER | read-write | Set bandwidth threshold for a port. |
| igmpCount | 1.3.6.1.4.1.6321.1.2.3.3.7.5 | |||
| igmpCountPortTable | 1.3.6.1.4.1.6321.1.2.3.3.7.5.1 | not-accessible | This table specify the IGMP count limiting of the port. | |
| igmpCountPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1 | not-accessible | An entry of igmpCountPortTable. | |
| INT igmpCountPortEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1.1 | INTEGER | read-write | Enable/disable IGMP count limiting for a port. |
| INT igmpCountPortLimit | 1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1.2 | INTEGER | read-write | The maximum allowed IGMP report count for a port. |
| mvlan | 1.3.6.1.4.1.6321.1.2.3.3.7.6 | |||
| INT maxNumOfMvlan | 1.3.6.1.4.1.6321.1.2.3.3.7.6.1 | INTEGER | read-only | The maximum number of row entries that user can create in mvlanTable. |
| mvlanTable | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2 | not-accessible | A table containing static configuration information for each multicast VLAN configured into the device. | |
| mvlanEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1 | not-accessible | An entry of mvlanTable. | |
| VLA mvlanIndex | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.1 | VlanIndex | read-only | The VLAN-ID refering to this VLAN. |
| STR mvlanName | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.2 | DisplayString | read-create | An administratively assigned string, which may be used to identify the VLAN. |
| POR mvlanEgressPorts | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.3 | PortList | read-create | The set of ports which are permanently assigned to the egress list for this multicast VLAN. |
| POR mvlanUntaggedPorts | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.4 | PortList | read-create | The set of ports which should transmit egress packets for this multicast VLAN as untagged. |
| ROW mvlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.5 | RowStatus | read-create | This object indicates the status of this entry. |
| mvlanTranslateTable | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3 | not-accessible | A table that contains multicast to VLAN translation. | |
| mvlanTranslateEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1 | not-accessible | An entry of mvlanTranslateTable. | |
| INT mvlanTranslateIndex | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.1 | INTEGER | read-only | The index which specif the entry. |
| IP mvlanTranslateStartIp | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.2 | IpAddress | read-write | The start IP of the multicast VLAN translation. |
| IP mvlanTranslateEndIp | 1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.3 | IpAddress | read-write | The end IP of the multicast VLAN translation. |
| queryVid | 1.3.6.1.4.1.6321.1.2.3.3.7.7 | |||
| INT maxNumOfQryVid | 1.3.6.1.4.1.6321.1.2.3.3.7.7.1 | INTEGER | read-only | The maximum number of row entries that user can create in qryVidConfTable. |
| qryVidConfTable | 1.3.6.1.4.1.6321.1.2.3.3.7.7.2 | not-accessible | This table defines statically set VLANs used for response IGMP report. | |
| qryVidConfEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1 | not-accessible | An entry in qryVidConfTable. | |
| INT qryVid | 1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1.1 | INTEGER | read-only | VLAN ID. |
| ROW qryVidRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1.2 | RowStatus | read-create | This object indicates the status of this entry. |
| qryVidStatusTable | 1.3.6.1.4.1.6321.1.2.3.3.7.7.3 | not-accessible | This table shows statically set or dynamically learned VLANs used for response IGMP report. | |
| qryVidStatusEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.7.3.1 | not-accessible | An entry in qryVidStatusTable. | |
| INT qryVidType | 1.3.6.1.4.1.6321.1.2.3.3.7.7.3.1.1 | INTEGER | read-only | VLAN type. |
| INT igmpVersion | 1.3.6.1.4.1.6321.1.2.3.3.7.9 | INTEGER | read-write | Setting IGMP version. |
| INT igmpLeaveMode | 1.3.6.1.4.1.6321.1.2.3.3.7.10 | INTEGER | read-write | Configure IGMP leave message handling mode. |
| igmpTimer | 1.3.6.1.4.1.6321.1.2.3.3.7.11 | |||
| INT igmpQryInterval | 1.3.6.1.4.1.6321.1.2.3.3.7.11.1 | INTEGER | read-write | Set IGMP query interval, 10~1000 in seconds. |
| INT igmpRobust | 1.3.6.1.4.1.6321.1.2.3.3.7.11.2 | INTEGER | read-write | Set IGMP query Robustness, 1~5. |
| INT igmpQryRespInterval | 1.3.6.1.4.1.6321.1.2.3.3.7.11.3 | INTEGER | read-write | Set IGMP query response interval, 1~100 in 100 milliseconds. |
| INT igmpLastMemQryInterval | 1.3.6.1.4.1.6321.1.2.3.3.7.11.4 | INTEGER | read-write | Set IGMP Last Member Query interval, 1~5 in 100 milliseconds. |
| INT igmpLastMemQryRobust | 1.3.6.1.4.1.6321.1.2.3.3.7.11.5 | INTEGER | read-write | Set Last Member Query Robustness, 1~5. |
| auditQuery | 1.3.6.1.4.1.6321.1.2.3.3.7.12 | |||
| INT auditQryEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.12.1 | INTEGER | read-write | Enable/disable IGMP audit query. |
| INT auditQryInterval | 1.3.6.1.4.1.6321.1.2.3.3.7.12.2 | INTEGER | read-write | Set IGMP Audit Query Interval, 1~4 in 100 milliseconds. |
| INT auditQryRobust | 1.3.6.1.4.1.6321.1.2.3.3.7.12.3 | INTEGER | read-write | Set IGMP Audit Query Robustness, 1~5. |
| igmpProfile | 1.3.6.1.4.1.6321.1.2.3.3.7.13 | |||
| INT maxNumberOfIgmpProfiles | 1.3.6.1.4.1.6321.1.2.3.3.7.13.1 | INTEGER | read-only | The max number of IGMP profiles in the system. |
| igmpProfileTable | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2 | not-accessible | A table that contains IGMP Profiles. | |
| igmpProfileEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1 | not-accessible | The entry of IGMP Profile table. | |
| STR igmpProfileName | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.1 | DisplayString | read-only | The IGMP Profile name. |
| INT igmpProfileEnable | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.2 | INTEGER | read-write | Enable/disable IGMP Profile. |
| INT igmpProfileMaxGroup | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.3 | INTEGER | read-write | Set maximum allowed multicast group, 1~64. |
| ROW igmpProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.4 | RowStatus | read-create | The row status of the IGMP Profile entry. |
| igmpFilterTable | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3 | not-accessible | A table that contains IGMP Filters. | |
| igmpFilterEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1 | not-accessible | The entry of IGMP Filter table. | |
| INT igmpFilterIndex | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.1 | INTEGER | read-only | The index which specifies the filter rule. |
| IP igmpFilterStartIp | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.2 | IpAddress | read-create | The start IP of the filter rule. |
| IP igmpFilterEndIp | 1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.3 | IpAddress | read-create | The end IP of the filter rule. |
| igmpProfilePortTable | 1.3.6.1.4.1.6321.1.2.3.3.7.13.4 | not-accessible | This table specifies the IGMP Profile of the port. | |
| igmpProfilePortEntry | 1.3.6.1.4.1.6321.1.2.3.3.7.13.4.1 | not-accessible | An entry in igmpProfilePortTable. | |
| OCT igmpProfilePortProfile | 1.3.6.1.4.1.6321.1.2.3.3.7.13.4.1.1 | OCTET STRING | read-write | The IGMP Profile of the port. |
| port | 1.3.6.1.4.1.6321.1.2.3.3.8 | |||
| subrPortTable | 1.3.6.1.4.1.6321.1.2.3.3.8.1 | not-accessible | This table includes subscriber attributes for the port. | |
| subrPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.1.1 | not-accessible | An entry in subrPortTable. | |
| STR subrPortName | 1.3.6.1.4.1.6321.1.2.3.3.8.1.1.1 | DisplayString | read-write | Name of the subscriber. |
| STR subrPortTel | 1.3.6.1.4.1.6321.1.2.3.3.8.1.1.2 | DisplayString | read-write | Telephone number of the subscriber. |
| vdslPort | 1.3.6.1.4.1.6321.1.2.3.3.8.3 | |||
| vdslLineConfTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1 | not-accessible | This table includes common attributes describing the VDSL line. This table is supported by R2.00 and later versions. | |
| vdslLineConfEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1 | not-accessible | An entry in vdslLineConfTable. | |
| INT vdslLineConfUpbo | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.1 | INTEGER | read-write | Enable/disable upstream power backoff control. |
| INT vdslLineConfVdslProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.2 | INTEGER | read-write | Set VDSL profile. |
| INT vdslLineConfRfiBand | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.4 | INTEGER | read-write | Set VDSL customized RFI configuration. disable: not apply RFI notch to port ansi: use pre-defined ANSI RFI notch etsi: use pre-defined ETSI notch custom: user needs to define customized RFI notch band through vdslRfiCustomTable |
| STR vdslLineConfIpqosProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.5 | DisplayString | read-write | |
| INT vdslLineConfVturInp | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.6 | INTEGER | read-write | VTUR minimum INP value |
| INT vdslLineConfVtucInp | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.7 | INTEGER | read-write | VTUC mimimum INT value |
| INT vdslLineConfOptionMask | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.8 | INTEGER | read-write | Bit1: disable Trellis coding in ADSL mode Bit2: disable Reed-Solomon coding for ADSL Bit3: disable upstream bitswaps Bit4: disable downstream bitwaps Bit5: disable upstream 1-bit constellation support Bit6: disable the transmit windowing in ADSL2+ mode Bit7: disable S=0.5 support in G.dmt Bit8: reserved Bit9: enable nitro Bit10: enable ADSL2 Annex L Bit11: enable ADSL2+ Annex M Bit12: enable US PTM optimization Bit13: enable DS PTM optimization Bit14: enable US PHYR Bit15: enable DS PHYR |
| INT vdslLineConfUpboForceLength | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.9 | INTEGER | read-write | -1 means max(kl0_CO,kl0_CPE). -2 means min(kl0_CO,kl0_CPE). -3 means kl0_CO. -4 means kl0_CPE. -5 means kl0_CPE + delta as calculated from. |
| INT vdslLineConfPsdShape | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.10 | INTEGER | read-write | PSD mask type |
| INT vdslLineConfDpbo | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.11 | INTEGER | read-write | Enable/Disable DPBO |
| INT vdslLineConfDpboParamEsel | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.12 | INTEGER | read-write | DPBO ESEL parameter |
| INT vdslLineConfDpboParamEscma | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.13 | INTEGER | read-write | DPBO ESCMA parameter -1~1.5 in step of 1/256. |
| INT vdslLineConfDpboParamEscmb | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.14 | INTEGER | read-write | DPBO ESCMB parameter -1~1.5 in step of 1/256. |
| INT vdslLineConfDpboParamEscmc | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.15 | INTEGER | read-write | DPBO ESCMC parameter -1~1.5 in step of 1/256. |
| INT vdslLineConfDpboParamMus | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.16 | INTEGER | read-write | DPBO MUS parameter. |
| INT vdslLineConfDpboParamFmin | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.17 | INTEGER | read-write | DPBO FMIN parameter |
| INT vdslLineConfDpboParamFmax | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.18 | INTEGER | read-write | DPBO FMAX parameter |
| INT vdslLineConfDpboParamPsdId | 1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.19 | INTEGER | read-write | Valid range for setting is 1~6. |
| vdslVlan | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2 | |||
| vdslPortConfTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1 | not-accessible | This table includes common attributes describing the VDSL port. This table is supported by R2.00 and later versions. | |
| vdslPortConfEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1 | not-accessible | An entry in vdslPortConfTable. | |
| INT vdslPortConfTlsEnable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.4 | INTEGER | read-write | Enable/disable the transparent LAN service. |
| VLA vdslPortConfTlsVid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.5 | VlanIndex | read-write | The transparent LAN service s-tag VID. |
| INT vdslPortConfTlsPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.6 | INTEGER | read-write | The transparent LAN service s-tag priority. |
| INT vdslPortConfDtEnable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.7 | INTEGER | read-write | Enable/disable the Double Tagging service. |
| VLA vdslPortConfDtSVid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.8 | VlanIndex | read-write | The Double Tagging service s-tag VID. |
| INT vdslPortConfDtSPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.9 | INTEGER | read-write | The Double Tagging service s-tag priority. |
| VLA vdslPortConfDtCVid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.10 | VlanIndex | read-write | The Double Tagging service c-tag VID. |
| INT vdslPortConfDtCPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.11 | INTEGER | read-write | The Double Tagging service c-tag priority. |
| vdslPortVlanTranslateTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2 | not-accessible | A table that contains VLAN translation. | |
| vdslPortVlanTranslateEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1 | not-accessible | An entry in vdslPortVlanTranslateTable. | |
| INT vdslPortVlanTranslateVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.1 | INTEGER | read-only | VPI of the vtt. |
| INT vdslPortVlanTranslateVci | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.2 | INTEGER | read-only | VCI of the vtt. |
| VLA vdslPortVlanTranslateCxvid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.3 | VlanIndex | read-only | CXVID of the vtt. |
| VLA vdslPortVlanTranslateCvid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.4 | VlanIndex | read-only | CVID of the vtt. |
| VLA vdslPortVlanTranslateSvid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.5 | VlanIndex | read-only | SVID of the vtt. |
| INT vdslPortVlanTranslateDsonly | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.6 | INTEGER | read-only | Donwstream direction only of the vtt. |
| ROW vdslPortVlanTranslateRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.7 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| vdslPortPvlanTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4 | not-accessible | Protocol VLAN configuration table. | |
| vdslPortPvlanEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1 | not-accessible | An entry in vdslPortPvlanTable. | |
| U32 vdslPortPvlanEtype | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.1 | Unsigned32 | read-only | 0~0xffff. |
| VLA vdslPortPvlanVid | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.2 | VlanIndex | read-create | |
| INT vdslPortPvlanPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.3 | INTEGER | read-create | |
| ROW vdslPortPvlanRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.4 | RowStatus | read-create | |
| vdslRfiCustomTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3 | not-accessible | This table includes VDSL customized RFI configuration. This table is supported by R2.00 and later versions. | |
| vdslRfiCustomEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1 | not-accessible | An entry in vdslRfiCustomTable. | |
| INT vdslRfiCustomIndex | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.1 | INTEGER | read-only | Index of the table. |
| INT vdslRfiCustomStartFreq | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.2 | INTEGER | read-write | The start value of the customized frequency range. |
| INT vdslRfiCustomEndFreq | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.3 | INTEGER | read-write | The end value of the customized frequency range. |
| INT vdslRfiCustomEnable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.4 | INTEGER | read-write | Enable or disable the customized frequency range setting. |
| vdslLineConfUpboParamTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4 | not-accessible | This table includes VDSL UPBO configuration. | |
| vdslLineConfUpboParamEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1 | not-accessible | An entry in vdslLineConfUpboParamTable. | |
| INT vdslLineConfUpboParamBand | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.1 | INTEGER | read-only | Index of the table. |
| INT vdslLineConfUpboParamA | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.2 | INTEGER | read-write | |
| INT vdslLineConfUpboParamB | 1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.3 | INTEGER | read-write | |
| vdslLineConfDpboTable | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5 | not-accessible | This table includes VDSL DPBO configuration. | |
| vdslLineConfDpboEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1 | not-accessible | An entry in vdslLineConfDpboTable. | |
| INT vdslLineConfDpboIndex | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.1 | INTEGER | read-only | Index of the table. |
| INT vdslLineConfDpboTone | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.2 | INTEGER | read-write | |
| INT vdslLineConfDpboPsd | 1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.3 | INTEGER | read-write | |
| pvc | 1.3.6.1.4.1.6321.1.2.3.3.8.4 | |||
| INT maxNumOfPvcs | 1.3.6.1.4.1.6321.1.2.3.3.8.4.1 | INTEGER | read-only | The maximum number of PVCs which could be created on a port. |
| pvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2 | not-accessible | This table includes PVC configuration. | |
| pvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1 | not-accessible | An entry in pvcTable. | |
| INT pvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT pvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA pvcPvid | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.3 | VlanIndex | read-only | Default VID of the pvc. |
| INT pvcPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.5 | INTEGER | read-create | 802.1p default priority of the pvc. |
| STR pvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.6 | DisplayString | read-create | The value of this object identifies the row in the ipqosProfileTable. |
| INT pvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.7 | INTEGER | read-create | Encapsulation of the pvc. |
| ROW pvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.8 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| STR pvcAcName | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.11 | DisplayString | read-create | Access concentrator name for paepvc. |
| STR pvcServiceName | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.12 | DisplayString | read-create | Service name for paepvc. |
| INT pvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.13 | INTEGER | read-create | The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time. |
| INT pvcAuto | 1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.14 | INTEGER | read-create | Enable/disable auto detection for PPPoE/PPPoA encapsulation. |
| pvcStateTable | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3 | not-accessible | This table show current PVC status. | |
| pvcStateEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1 | not-accessible | An entry in pvcStateTable. | |
| INT pvcStateVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT pvcStateVci | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA pvcStatePvid | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.3 | VlanIndex | read-only | Default VID of the pvc. |
| INT pvcStatePriority | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.4 | INTEGER | read-only | 802.1p default priority of the pvc. |
| STR pvcStateChannelType | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.8 | DisplayString | read-only | The value of this object identifies the channel type at runtime. |
| STR pvcStateEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.9 | DisplayString | read-only | The value of this object identifies the channel encapsulation at runtime. |
| rpvc | 1.3.6.1.4.1.6321.1.2.3.3.8.8 | |||
| rpvcGatewayTable | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1 | not-accessible | This table includes Routed Gateway configuration. | |
| rpvcGatewayEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1 | not-accessible | An entry in Routed Gateway table. | |
| IP rpvcGatewayIp | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.1 | IpAddress | read-only | IP of RPVC gateway. |
| VLA rpvcGatewayVlanId | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.2 | VlanIndex | read-write | Vlan id send to this RPVC gateway. |
| ROW rpvcGatewayRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.3 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| INT rpvcGatewayPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.4 | INTEGER | read-write | 802.1p p bit send to this RPVC gateway. |
| rpvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2 | not-accessible | This table includes RPVC configuration. | |
| rpvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1 | not-accessible | An entry in rpvcTable. | |
| INT rpvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.1 | INTEGER | read-only | VPI of the rpvc. |
| INT rpvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.2 | INTEGER | read-only | VCI of the rpvc. |
| INT rpvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.3 | INTEGER | read-create | Encapsulation of the rpvc. |
| STR rpvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.4 | DisplayString | read-create | The ipqos profile of the rpvc. |
| IP rpvcIp | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.5 | IpAddress | read-only | The IP of the rpvc. |
| IP rpvcNetmask | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.6 | IpAddress | read-only | The IP mask of the rpvc IP. |
| IP rpvcGatewayIpAddress | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.7 | IpAddress | read-create | The gateway IP of rpvc. |
| ROW rpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.8 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| rpvcRouteDomainTable | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3 | not-accessible | This table includes RPVC route domain configuration. | |
| rpvcRouteDomainEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1 | not-accessible | An entry in rpvcRouteDomainTable. | |
| INT rpvcRouteDomainVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.1 | INTEGER | read-only | VPI of the rpvc. |
| INT rpvcRouteDomainVci | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.2 | INTEGER | read-only | VCI of the rpvc. |
| IP rpvcRouteDomainIp | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.3 | IpAddress | read-only | The route domain IP. |
| IP rpvcRouteDomainNetmask | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.4 | IpAddress | read-only | The IP mask of the route domain IP. |
| ROW rpvcRouteDomainRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.5 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| INT rpvcArpAgingTime | 1.3.6.1.4.1.6321.1.2.3.3.8.8.4 | INTEGER | read-write | Set RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg. |
| INT rpvcArpFlush | 1.3.6.1.4.1.6321.1.2.3.3.8.8.5 | INTEGER | read-write | Flush the RPVC ARP proxy table. |
| dsBcastDisableTable | 1.3.6.1.4.1.6321.1.2.3.3.8.9 | not-accessible | This table includes Down Stream Bcast configuration. | |
| dsBcastDisableEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.9.1 | not-accessible | An entry in Down Stream Bcast table. | |
| INT dsBcastDisableVlanId | 1.3.6.1.4.1.6321.1.2.3.3.8.9.1.1 | INTEGER | read-only | downstream broadcast disabled vid. |
| ROW dsBcastDisableRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.9.1.2 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| paepvc | 1.3.6.1.4.1.6321.1.2.3.3.8.10 | |||
| paepvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1 | not-accessible | This table includes PPPoAoE PVC configuration. | |
| paepvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1 | not-accessible | An entry of paepvcTable. | |
| INT paepvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT paepvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA paepvcPvid | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.3 | VlanIndex | read-only | Default VID of the pvc. |
| INT paepvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.4 | INTEGER | read-create | Encapsulation of the paepvc. |
| INT paepvcPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.5 | INTEGER | read-create | 802.1p default priority of the pvc. |
| STR paepvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.6 | DisplayString | read-create | The value of this object identifies the row in the ipqosProfileTable. |
| STR paepvcAcName | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.7 | DisplayString | read-create | Access concentrator name. |
| STR paepvcServiceName | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.8 | DisplayString | read-create | Service name. |
| INT paepvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.9 | INTEGER | read-create | The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time. |
| ROW paepvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.10 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| VLA paepvcCvid | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.12 | VlanIndex | read-create | Default C-VID of the pvc. |
| INT paepvcCPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.13 | INTEGER | read-create | 802.1p default C-priority of the pvc. |
| tlspvc | 1.3.6.1.4.1.6321.1.2.3.3.8.11 | |||
| tlspvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1 | not-accessible | This table includes Transparent LAN Service (TLS) PVC configuration. | |
| tlspvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1 | not-accessible | An entry of tlspvcTable. | |
| INT tlspvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT tlspvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA tlspvcSvid | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.3 | VlanIndex | read-only | s-tag VLAN ID of the pvc. |
| INT tlspvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.4 | INTEGER | read-create | Encapsulation of the tlspvc. |
| INT tlspvcSpriority | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.5 | INTEGER | read-create | s-tag priority of the pvc. |
| STR tlspvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.6 | DisplayString | read-create | The value of this object identifies the row in the ipqosProfileTable. |
| ROW tlspvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.7 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| dtpvc | 1.3.6.1.4.1.6321.1.2.3.3.8.13 | |||
| dtpvcTable | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1 | not-accessible | This table includes Double Tagging (DT) PVC configuration. | |
| dtpvcEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1 | not-accessible | An entry of dtpvcTable. | |
| INT dtpvcVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.1 | INTEGER | read-only | VPI of the pvc. |
| INT dtpvcVci | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.2 | INTEGER | read-only | VCI of the pvc. |
| VLA dtpvcSvid | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.3 | VlanIndex | read-only | s-tag VLAN ID of the pvc. |
| INT dtpvcSpriority | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.4 | INTEGER | read-create | s-tag priority of the pvc. |
| VLA dtpvcCvid | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.5 | VlanIndex | read-create | c-tag VLAN ID of the pvc. |
| INT dtpvcCpriority | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.6 | INTEGER | read-create | c-tag priority of the pvc. |
| INT dtpvcEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.7 | INTEGER | read-create | Encapsulation of the dtpvc. |
| STR dtpvcProfile | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.8 | DisplayString | read-create | The value of this object identifies the row in the ipqosProfileTable. |
| ROW dtpvcRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.9 | RowStatus | read-create | This object is used to create a new row or delete an existing row in this table. |
| INT dtpvcSuperChannel | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.10 | INTEGER | read-create | Specified the configured DTPVC is a super channel. |
| STR dtpvcAcName | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.11 | DisplayString | read-create | Access concentrator name for paepvc. |
| STR dtpvcServiceName | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.12 | DisplayString | read-create | Service name for paepvc. |
| INT dtpvcHelloTime | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.13 | INTEGER | read-create | The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time. |
| INT dtpvcAuto | 1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.14 | INTEGER | read-create | Enable/disable auto detection for PPPoE/PPPoA encapsulation. |
| dtpvcStateTable | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2 | not-accessible | This table show current DTPVC status. | |
| dtpvcStateEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1 | not-accessible | An entry in dtpvcStateTable. | |
| INT dtpvcStateVpi | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.1 | INTEGER | read-only | VPI of the dtpvc. |
| INT dtpvcStateVci | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.2 | INTEGER | read-only | VCI of the dtpvc. |
| VLA dtpvcStateSvid | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.3 | VlanIndex | read-only | Default S-VID of the dtpvc. |
| INT dtpvcStateSPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.4 | INTEGER | read-only | S-priority of the dtpvc. |
| VLA dtpvcStateCvid | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.5 | VlanIndex | read-only | Default C-VID of the dtpvc. |
| INT dtpvcStateCPriority | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.6 | INTEGER | read-only | C-priority of the dtpvc. |
| STR dtpvcStateChannelType | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.8 | DisplayString | read-only | The value of this object identifies the channel type at runtime. |
| STR dtpvcStateEncap | 1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.9 | DisplayString | read-only | The value of this object identifies the channel encapsulation at runtime. |
| snrMgn | 1.3.6.1.4.1.6321.1.2.3.3.8.15 | |||
| snrMgnTable | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1 | not-accessible | A table containing the per port SNR Margin configuration. | |
| snrMgnEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1 | not-accessible | An entry of snrMgnTable. | |
| INT snrMgnMode | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.1 | INTEGER | read-write | Configure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configuration comes from line configuration. |
| INT snrMgnUcTarget | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.2 | INTEGER | read-write | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| INT snrMgnUcMax | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.3 | INTEGER | read-write | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation. |
| INT snrMgnUcMin | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.4 | INTEGER | read-write | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down. |
| INT snrMgnUcDownshift | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.5 | INTEGER | read-write | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'. |
| INT snrMgnUcUpshift | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.6 | INTEGER | read-write | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'. |
| INT snrMgnUrTarget | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.7 | INTEGER | read-write | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| INT snrMgnUrMax | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.8 | INTEGER | read-write | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation. |
| INT snrMgnUrMin | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.9 | INTEGER | read-write | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down. |
| INT snrMgnUrDownshift | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.10 | INTEGER | read-write | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'. |
| INT snrMgnUrUpshift | 1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.11 | INTEGER | read-write | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'. |
| dslRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16 | |||
| dslRateTable | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1 | not-accessible | A table containing the per port DSL Rate configuration. | |
| dslRateEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1 | not-accessible | An entry of dslRateTable. | |
| INT dslRateMode | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.1 | INTEGER | read-write | Configure DSL Rate configuration mode of the specified ports. Profile: the DSL Rate configuration comes from DSL profile. Line: the DSL Rate configuration comes from line configuration. |
| INT dslRateLatencyMode | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.2 | INTEGER | read-only | The latency mode is fast or interleave |
| INT dslRateXtucMaxInterleaveDelay | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.3 | INTEGER | read-write | Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. |
| U32 dslRateXtucMaxTxRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.4 | Unsigned32 | read-write | Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps. |
| U32 dslRateXtucMinTxRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.5 | Unsigned32 | read-write | Configured Minimum Transmit rate for `Fast' or `Interleave' channels, in bps |
| INT dslRateXturMaxInterleaveDelay | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.6 | INTEGER | read-write | Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency |
| U32 dslRateXturMaxTxRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.7 | Unsigned32 | read-write | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| U32 dslRateXturMinTxRate | 1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.8 | Unsigned32 | read-write | Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps. |
| gbond | 1.3.6.1.4.1.6321.1.2.3.3.8.51 | |||
| gbondGroupTable | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1 | not-accessible | A table containing the G.Bond configuration information for each bonding group of the device. | |
| gbondGroupEntry | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1 | not-accessible | An entry of gbondTable. | |
| OCT gbondGroupName | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.1 | OCTET STRING | read-only | An administratively assigned string, which may be used to identify bonding group. |
| OCT gbondGroupPorts | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.2 | OCTET STRING | read-create | The set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| U32 gbondGroupUpRate | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.4 | Unsigned32 | read-only | The UP stream rate. |
| U32 gbondGroupDownRate | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.5 | Unsigned32 | read-only | The DOWN stream rate. |
| ROW gbondGroupRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.6 | RowStatus | read-create | This object indicates the status of this entry. |
| profile | 1.3.6.1.4.1.6321.1.2.3.3.9 | |||
| sraShiftMarginProfile | 1.3.6.1.4.1.6321.1.2.3.3.9.1 | |||
| sraShiftMarginProfileTable | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1 | not-accessible | This table includes sra shift margin related configuration. | |
| sraShiftMarginProfileEntry | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1 | not-accessible | An entry in ipqosProfileTable. | |
| STR sraShiftMarginProfileName | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.1 | DisplayString | read-only | This object identifies a row in this table. |
| INT xtucConfDownshiftSnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.2 | INTEGER | read-create | Specifies the downstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db. |
| INT xtucConfUpshiftSnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.3 | INTEGER | read-create | Specifies the downstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db. |
| INT xtucConfDownshiftTime | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.4 | INTEGER | read-only | Specifies the downstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec. |
| INT xtucConfUpshiftTime | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.5 | INTEGER | read-only | Specifies the downstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec. |
| INT xturConfDownshiftSnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.6 | INTEGER | read-create | Specifies the upstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db. |
| INT xturConfUpshiftSnrMgn | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.7 | INTEGER | read-create | Specifies the upstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db. |
| INT xturConfDownshiftTime | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.8 | INTEGER | read-only | Specifies the upstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec. |
| INT xturConfUpshiftTime | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.9 | INTEGER | read-only | Specifies the upstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec. |
| ROW sraShiftMarginProfileStatus | 1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.10 | RowStatus | read-create | This object is used to create a new row or modify or delete an existing row in this table. |
| ipqosProfile | 1.3.6.1.4.1.6321.1.2.3.3.9.8 | |||
| INT maxNumOfIpqosProfiles | 1.3.6.1.4.1.6321.1.2.3.3.9.8.1 | INTEGER | read-only | The maximum number of IPQOS profiles supported by the system. |
| ipqosProfileTable | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2 | not-accessible | This table includes IPQOS related configuration. | |
| ipqosProfileEntry | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1 | not-accessible | An entry in ipqosProfileTable. | |
| STR ipqosProfileName | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.1 | DisplayString | read-only | This object is used by the IPQOS profile table in order to identify a row of this table. |
| INT ipqosProfileNumOfQueue | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.2 | INTEGER | read-create | The number of IPQOS queues. |
| ROW ipqosProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.3 | RowStatus | read-create | This object is used to create a new row or delete an existing row in the table. |
| ipqosProfileQueueTable | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3 | not-accessible | This table includes IPQOS queue related configuration. | |
| ipqosProfileQueueEntry | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1 | not-accessible | An entry in ipqosProfileQueueTable. | |
| INT ipqosProfileQueueIndex | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.1 | INTEGER | read-only | IPQOS queue index. |
| INT ipqosProfileQueuePIR | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.2 | INTEGER | read-write | Peak rate.(multiple of 256) |
| INT ipqosProfileQueueCIR | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.3 | INTEGER | read-write | Commited rate.(multiple of 256) |
| INT ipqosProfileQueuePBS | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.4 | INTEGER | read-write | Peak burst size.(mutiple of 256) |
| INT ipqosProfileQueueCBS | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.5 | INTEGER | read-write | Commited burst size.(mutiple of 256) |
| INT ipqosProfileQueueLevel | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.6 | INTEGER | read-write | Queue level. |
| INT ipqosProfileQueueWeight | 1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.7 | INTEGER | read-write | Queue weight. |
| switch | 1.3.6.1.4.1.6321.1.2.3.3.10 | |||
| dot3ad | 1.3.6.1.4.1.6321.1.2.3.3.10.6 | |||
| dot3adTable | 1.3.6.1.4.1.6321.1.2.3.3.10.6.1 | not-accessible | The table contains 802.3ad configuration. | |
| dot3adEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1 | not-accessible | ||
| INT dot3adGroupId | 1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1.1 | INTEGER | read-only | Group ID 1 for the subtending group and 2 for the uplink group. |
| INT dot3adEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1.2 | INTEGER | read-write | Enable/disable 802.3ad function. |
| INT lacpPriority | 1.3.6.1.4.1.6321.1.2.3.3.10.6.2 | INTEGER | read-write | LACP system priority. |
| INT lacpTimeout | 1.3.6.1.4.1.6321.1.2.3.3.10.6.3 | INTEGER | read-write | The time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up. |
| portTrunkingTable | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4 | not-accessible | The table contains current status of port trunking. | |
| portTrunkingEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1 | not-accessible | ||
| INT portTrunkingGroupId | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.1 | INTEGER | read-only | Group ID 1 for the subtending group and 2 for the uplink group. |
| INT portTrunkingStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.2 | INTEGER | read-only | Port trunking status. |
| POR portTrunkingPortList | 1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.3 | PortList | read-only | The port list which actually joins the trunking group. |
| dscp | 1.3.6.1.4.1.6321.1.2.3.3.10.10 | |||
| dscpMappingTable | 1.3.6.1.4.1.6321.1.2.3.3.10.10.1 | not-accessible | The table contains DSCP mapping configuration for the adsl ports. | |
| dscpMappingEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1 | not-accessible | An entry of dscpMappingTable. | |
| INT dscpSrcCodePoint | 1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1.1 | INTEGER | read-only | The DSCP source code point used for mapping. |
| INT dscpMapPriority | 1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1.3 | INTEGER | read-write | The mapping p bits that will replace the source p bits in the incoming packet. |
| dscpPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.10.2 | not-accessible | The table contains DSCP mapping configuration for the adsl ports. | |
| dscpPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.10.2.1 | not-accessible | An entry of dscpPortTable. | |
| INT dscpStatusEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.10.2.1.1 | INTEGER | read-write | The DSCP port status. |
| vlanIsolation | 1.3.6.1.4.1.6321.1.2.3.3.10.12 | |||
| vlanIsolationTable | 1.3.6.1.4.1.6321.1.2.3.3.10.12.1 | not-accessible | A table contains configuration of isolated VLAN. | |
| vlanIsolationEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.12.1.1 | not-accessible | An entry of vlanIsolationTable. | |
| ROW vlanIsolationRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.12.1.1.1 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| enetMtu | 1.3.6.1.4.1.6321.1.2.3.3.10.13 | |||
| INT enetMtuEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.13.1 | INTEGER | read-write | Sets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526. |
| tpid | 1.3.6.1.4.1.6321.1.2.3.3.10.14 | |||
| U32 tpidEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.14.1 | Unsigned32 | read-write | Sets TPID(Tag Protocol Identifier) of tagged frame, 0~FFFF. |
| cfm | 1.3.6.1.4.1.6321.1.2.3.3.10.15 | |||
| cfmLoopbackPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.15.1 | not-accessible | A table that contains CFM information. | |
| cfmLoopbackPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.15.1.1 | not-accessible | An entry in cfmLoopbackPortTable. | |
| INT cfmLoopbackPortState | 1.3.6.1.4.1.6321.1.2.3.3.10.15.1.1.1 | INTEGER | read-write | CFM loopback enable/disable on the port. |
| cfmMIPTable | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2 | not-accessible | ||
| cfmMIPEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1 | not-accessible | An entry in cfmMIPTable. | |
| INT cfmPort | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.3 | INTEGER | not-accessible | |
| ROW cfmMIPRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.4 | RowStatus | read-create | |
| PHY cfmMIPMacAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.5 | PhysAddress | read-write | CFM MIP mac address |
| INT cfmActionEnableStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.15.3 | INTEGER | read-write | CFM Action enable status for the CO device |
| INT cfmMode | 1.3.6.1.4.1.6321.1.2.3.3.10.15.4 | INTEGER | read-write | CFM follow standard mode |
| INT cfmLbmTimeout | 1.3.6.1.4.1.6321.1.2.3.3.10.15.5 | INTEGER | read-write | CFM LBM timeout, 100-86400 ms |
| INT cfmLbmDataTlvLength | 1.3.6.1.4.1.6321.1.2.3.3.10.15.6 | INTEGER | read-write | CFM LBM data tlv length, 0-1400 bytes |
| cfmLbrTable | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7 | not-accessible | A table that contains CFM LBR results. | |
| cfmLbrEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1 | not-accessible | An entry in cfmLbrTable. | |
| INT cfmLbmIndex | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.1 | INTEGER | read-only | CFM lbm index. |
| INT cfmLbrIndex | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.2 | INTEGER | read-only | CFM lbr index. |
| PHY cfmLbrSrcMac | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.3 | PhysAddress | read-only | CFM lbr source address. |
| INT cfmLbrStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.4 | INTEGER | read-only | CFM lbr status. |
| INT cfmLbrRtt | 1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.5 | INTEGER | read-only | CFM lbr rtt in ms. |
| dhcp | 1.3.6.1.4.1.6321.1.2.3.3.10.51 | |||
| dhcpRelay82Table | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2 | not-accessible | A table that contains DHCP Relay configuration. | |
| dhcpRelay82Entry | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1 | not-accessible | The entry of DHCP Relay table. | |
| IP dhcpRelay82PrimaryServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.1 | IpAddress | read-write | The IP address of the DHCP Relay primary server. |
| IP dhcpRelay82SecondaryServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.2 | IpAddress | read-write | The IP address of the DHCP Relay secondary server. |
| INT dhcpRelay82ActiveServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.3 | INTEGER | read-only | The current active DHCP Relay server. |
| INT dhcpRelay82Enable | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.4 | INTEGER | read-create | Enable/disable DHCP relay and Option82 function. |
| STR dhcpRelay82Info | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.5 | DisplayString | read-create | User specific Option82 information. |
| INT dhcpRelay82RelayMode | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.6 | INTEGER | read-create | DHCP relay mode. |
| INT dhcpRelay82Suboption2Enable | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.8 | INTEGER | read-create | Enable/disable Option 82 sub-option 2. |
| STR dhcpRelay82Suboption2Info | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.9 | DisplayString | read-create | User specified information for Option 82 sub-option 2. |
| INT dhcpRelay82EntryEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.10 | INTEGER | read-create | Enable/disable DHCP Relay |
| INT dhcpRelay82EntryOptionMode | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.11 | INTEGER | read-create | Option82 format. |
| IP dhcpRelay82VlanIp | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.12 | IpAddress | read-write | The IP address of the DHCP Relay interface for this VLAN. |
| INT dhcpRelay82VlanMask | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.13 | INTEGER | read-write | The network mask of the DHCP Relay interface for this VLAN. |
| IP dhcpRelay82VlanGateway | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.14 | IpAddress | read-write | The gateway of the DHCP Relay interface for this VLAN. |
| IP dhcpRelay82ThirdServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.15 | IpAddress | read-write | The IP address of the DHCP Relay third server. |
| IP dhcpRelay82FourthServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.16 | IpAddress | read-write | The IP address of the DHCP Relay fourth server. |
| IP dhcpRelay82FifthServer | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.17 | IpAddress | read-write | The IP address of the DHCP Relay fifth server. |
| INT dhcpRelay82ServerVid | 1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.18 | INTEGER | read-write | The VID of the DHCP Relay server for this VLAN. |
| dhcpRelayTest | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8 | |||
| INT dhcpRelayTestVid | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8.1 | INTEGER | read-write | Setting the VID of the test server. |
| IP dhcpRelayTestIp | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8.2 | IpAddress | read-write | Setting the IP of the test server. |
| INT dhcpRelayTestOps | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8.3 | INTEGER | read-write | Set the object to 1 to test DHCP server. |
| STR dhcpRelayTestStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.51.8.4 | DisplayString | read-only | Display testing server status. |
| dhcpRelayArp | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9 | |||
| dhcpRelayArpShowTable | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1 | not-accessible | The table displays DHCP ARP. | |
| dhcpRelayArpShowEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1 | not-accessible | An entry of dhcpRelayArpShowTable. | |
| INT dhcpRelayArpShowVid | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.1 | INTEGER | read-only | Display the VID of the DHCP ARP entry. |
| IP dhcpRelayArpShowIp | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.2 | IpAddress | read-only | Display the IP of the DHCP ARP entry. |
| PHY dhcpRelayArpShowMac | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.3 | PhysAddress | read-only | Display the MAC of the DHCP ARP entry. |
| INT dhcpRelayArpFlushOps | 1.3.6.1.4.1.6321.1.2.3.3.10.51.9.2 | INTEGER | read-write | Set the object to 1 to start flushing. |
| macfilter | 1.3.6.1.4.1.6321.1.2.3.3.10.53 | |||
| macFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1 | not-accessible | This table includes the status of mac filtering for each port. | |
| macFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1 | not-accessible | An entry in macFilterPortTable. | |
| INT macFilterPortEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.1 | INTEGER | read-write | Enable/disable MAC filtering for the port. |
| INT macFilterPortMacCount | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.2 | INTEGER | read-write | The total number of MAC addresses allowed for the port. |
| INT macFilterPortFilterMode | 1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.3 | INTEGER | read-write | The mac filter mode (accept or deny) for the port. |
| INT maxNumOfMacFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.3.10.53.2 | INTEGER | read-only | The max number of mac filters supported in the system. |
| INT maxNumOfMacFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.3.10.53.3 | INTEGER | read-only | The max number of mac filters supported per port. |
| INT currNumOfMacFiltersInSystem | 1.3.6.1.4.1.6321.1.2.3.3.10.53.4 | INTEGER | read-only | The current number of mac filters in the system. |
| macFilterTable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.5 | not-accessible | A table that contains the mac filter addresses. | |
| macFilterEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1 | not-accessible | The entry of macFilterTable. | |
| PHY macFilterAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1.1 | PhysAddress | read-only | The mac address which can pass through or be rejected from the port. |
| ROW macFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1.2 | RowStatus | read-create | The row status of the entry. |
| macfilterBatchSet | 1.3.6.1.4.1.6321.1.2.3.3.10.53.6 | |||
| OCT macfilterTarget | 1.3.6.1.4.1.6321.1.2.3.3.10.53.6.1 | OCTET STRING | read-write | This managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis) Byte 2~3: 0, Reserved(slot) Byte 4: 0, reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| INT macfilterOps | 1.3.6.1.4.1.6321.1.2.3.3.10.53.6.2 | INTEGER | read-write | The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable mac filter BIT 4: set mac count BIT 5: disable mac count filter. |
| INT macFilterMacCountForBatchSet | 1.3.6.1.4.1.6321.1.2.3.3.10.53.6.3 | INTEGER | read-write | The total number of MAC addresses allowed for a port. |
| ouiFilterTable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.7 | not-accessible | A table that contains the OUI filter addresses. | |
| ouiFilterEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1 | not-accessible | The entry of ouiFilterTable. | |
| OCT ouiFilterAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1.1 | OCTET STRING | read-only | The first three bytes of the mac address which can pass through or be rejected from the port. |
| ROW ouiFilterRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1.2 | RowStatus | read-create | The row status of the entry. |
| INT maxNumOfOuiFiltersPerPort | 1.3.6.1.4.1.6321.1.2.3.3.10.53.8 | INTEGER | read-only | The max number of OUI filters supported per port. |
| ouiFilterPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.9 | not-accessible | This table includes the status of oui filtering for each port. | |
| ouiFilterPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1 | not-accessible | An entry in macFilterPortTable. | |
| INT ouiFilterPortEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1.1 | INTEGER | read-write | Enable/disable oui filtering for the port. |
| INT ouiFilterPortFilterMode | 1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1.2 | INTEGER | read-write | The oui filter mode (accept or deny) for the port. |
| dhcpSnoop | 1.3.6.1.4.1.6321.1.2.3.3.10.55 | |||
| dhcpSnoopPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1 | not-accessible | This table includes DHCP snooping enable/disable for each port. | |
| dhcpSnoopPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1 | not-accessible | An entry of dhcpSnoopPortTable. | |
| INT dhcpSnoopEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.1 | INTEGER | read-write | Enable/disable DHCP snooping for a port. |
| INT dhcpSnoopMaxcnt | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.2 | INTEGER | read-write | Set the max entries of the DHCP ARP table. |
| INT dhcpSnoopSmacverifyEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.3 | INTEGER | read-write | Enable/disable DHCP source MAC verify for a port. |
| OCT dhcpSnoopTarget | 1.3.6.1.4.1.6321.1.2.3.3.10.55.2 | OCTET STRING | read-write | This managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| INT dhcpSnoopOps | 1.3.6.1.4.1.6321.1.2.3.3.10.55.3 | INTEGER | read-write | The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush. |
| dhcpStaticTable | 1.3.6.1.4.1.6321.1.2.3.3.10.55.4 | not-accessible | This table defines DHCP static IP addresses. | |
| dhcpStaticEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1 | not-accessible | An entry of dhcpStaticTable. | |
| IP dhcpStaticIpAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1.1 | IpAddress | read-only | The IP address which can pass through the port. |
| ROW dhcpStaticRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1.2 | RowStatus | read-create | Row status of the table entry. |
| INT maxNumOfDhcpStaticIp | 1.3.6.1.4.1.6321.1.2.3.3.10.55.5 | INTEGER | read-only | The maximum number of DHCP static IP addresses which can be created for a port. |
| INT dhcpSnoopMaxcntMode | 1.3.6.1.4.1.6321.1.2.3.3.10.55.6 | INTEGER | read-write | When DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1. |
| acl | 1.3.6.1.4.1.6321.1.2.3.3.10.56 | |||
| aclSetTable | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1 | not-accessible | aclsetTable. | |
| aclSetEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1 | not-accessible | An entry of aclSetTable. | |
| INT aclSetVpi | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.1 | INTEGER | read-only | VPI value |
| INT aclSetVci | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.2 | INTEGER | read-only | VCI value |
| STR aclSetProfileName | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.3 | DisplayString | read-only | ACL Profile name |
| ROW aclSetRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.4 | RowStatus | read-write | RowStatus of aclSetEntry |
| aclProfileTable | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2 | not-accessible | aclProfileTable. | |
| aclProfileEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1 | not-accessible | An entry of aclProfileTable. | |
| STR aclProfileRuleName | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.1 | DisplayString | read-only | Profile rule name |
| INT aclProfileRuleNumber | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.2 | INTEGER | read-write | The managed object is for acl profile rule configuration. etype vlan (1), etype smac (2), etype dmac (3), vlan smac (4), vlan dmac (5), smac dmac (6), vlan priority (7), etype (8), vlan (9), smac (10), dmac (11), priority (12), protocol (13), vlan sip (14), vlan dip (15), vlan sport tcp|udp (16), vlan dport tcp|udp (17) |
| INT aclProfileActionNumber | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.3 | INTEGER | read-write | Profile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection. |
| INT aclProfileRuleParamMask | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.4 | INTEGER | read-write | Profile rule parameter mask. BIT 1: srcip / BIT 2: dstip / BIT 3: tos BIT 4: srcport BIT 5: dstport |
| INT aclProfileRuleEtype | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.5 | INTEGER | read-write | Profile rule etype |
| INT aclProfileRuleVid | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.6 | INTEGER | read-write | Profile rule vid |
| PHY aclProfileRuleSmac | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.7 | PhysAddress | read-write | Profile rule source MAC |
| PHY aclProfileRuleDmac | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.8 | PhysAddress | read-write | Profile rule destination MAC |
| INT aclProfileRulePriority | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.9 | INTEGER | read-write | Profile rule priority |
| INT aclProfileRuleProtocol | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.10 | INTEGER | read-write | Profile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype |
| INT aclProfileActionRate | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.21 | INTEGER | read-write | Profile action to replace to this rate |
| INT aclProfileActionrvlan | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.22 | INTEGER | read-write | Profile action to replace to this vlan |
| INT aclProfileActionrpri | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.23 | INTEGER | read-write | Profile action to replace to this priority |
| ROW aclProfileRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.24 | RowStatus | read-write | The row status of the entry. |
| IP aclProfileRuleSip | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.25 | IpAddress | read-create | Source IP. |
| IP aclProfileRuleDip | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.26 | IpAddress | read-create | Destination IP. |
| INT aclProfileRuleSport | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.27 | INTEGER | read-create | Source port. |
| INT aclProfileRuleDport | 1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.28 | INTEGER | read-create | Destination port. |
| pppoeAgent | 1.3.6.1.4.1.6321.1.2.3.3.10.57 | |||
| pppoeAgentTable | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1 | not-accessible | A table that contains PPPoE intermediate agent configuration. | |
| pppoeAgentEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1 | not-accessible | An entry of pppoeAgentTable. | |
| INT pppoeAgentEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.1 | INTEGER | read-create | Enable/disable PppoE intermediate agent function. |
| STR pppoeAgentInfo | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.2 | DisplayString | read-create | User specific Option82 information. |
| ROW pppoeAgentRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.3 | RowStatus | read-create | Row status of the table entry. |
| INT pppoeAgentOptionMode | 1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.4 | INTEGER | read-create | Option82 format. |
| INT maxNumOfPppoeAgentConf | 1.3.6.1.4.1.6321.1.2.3.3.10.57.2 | INTEGER | read-only | The maximum number of rows that can be created in pppoeAgentTable. |
| n1mac | 1.3.6.1.4.1.6321.1.2.3.3.10.58 | |||
| MAC n1macReplaceMac | 1.3.6.1.4.1.6321.1.2.3.3.10.58.1 | MacAddress | read-only | This MAC address will be used to replace client's MAC address. |
| n1macPortTable | 1.3.6.1.4.1.6321.1.2.3.3.10.58.2 | not-accessible | The table contains N to 1 MAC configuration for DSL ports. | |
| n1macPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.58.2.1 | not-accessible | An entry of n1macPortTable. | |
| INT n1macStatusEnable | 1.3.6.1.4.1.6321.1.2.3.3.10.58.2.1.1 | INTEGER | read-write | The port status of n1mac function. |
| macff | 1.3.6.1.4.1.6321.1.2.3.3.10.60 | |||
| macFfTable | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1 | not-accessible | A table that contains MAC Force Forwarding configuration. | |
| macFfEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1 | not-accessible | An entry of macFfTable. | |
| INT macFfIndex | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.1 | INTEGER | read-only | Index of the MACFF. |
| INT macFfVid | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.2 | INTEGER | read-write | The VLAN-ID refering to this AR/AS. |
| IP macFfArIP | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.3 | IpAddress | read-write | IP of this AR/AS |
| IP macFfSrcIP | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.4 | IpAddress | read-write | The source IP address of the MACFF. |
| INT macFfSrcMask | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.5 | INTEGER | read-write | The subnet mask of source IP mask. |
| ROW macFfRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.6 | RowStatus | read-create | The row status of the MacFfEntry entry. |
| INT macFfArpFlush | 1.3.6.1.4.1.6321.1.2.3.3.10.60.3 | INTEGER | read-write | Set the object to 1 to flush mac table. |
| INT maxNumOfMacFfVlanInSystem | 1.3.6.1.4.1.6321.1.2.3.3.10.60.4 | INTEGER | read-only | The max number of macff Vlans supported in the system. |
| macFfVlanTable | 1.3.6.1.4.1.6321.1.2.3.3.10.60.5 | not-accessible | A table that contains MAC Force Forwarding Vlan configuration. | |
| macFfVlanEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.60.5.1 | not-accessible | An entry of macFfVlanTable. | |
| ROW macFfVlanRowstatus | 1.3.6.1.4.1.6321.1.2.3.3.10.60.5.1.1 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| macFfStaticIPTable | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6 | not-accessible | ||
| macFfStaticIPEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1 | not-accessible | An entry of macFfTable. | |
| INT macFfStaticIPPort | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.1 | INTEGER | read-only | The port number, 1 ~ 48. |
| INT macFfStaticIPVid | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.2 | INTEGER | read-only | VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first. |
| IP macFfstaticIP | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.3 | IpAddress | read-only | The specified IP range. |
| INT macFfStaticIPMask | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.4 | INTEGER | read-only | Mask_bits is 24 .. 32. |
| ROW macFfStaticIPRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.5 | RowStatus | read-create | The row status used to configure the table entry. |
| macFfServerMacTable | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7 | not-accessible | ||
| macFfServerMacEntry | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1 | not-accessible | An entry of macFfTable. | |
| INT macFfServerMacVid | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.1 | INTEGER | read-only | VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first. |
| PHY macFfServerMacAddr | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.2 | PhysAddress | read-only | The mac address. |
| ROW macFfServerMacRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.3 | RowStatus | read-create | The row status used to configure the table entry. |
| sys | 1.3.6.1.4.1.6321.1.2.3.3.11 | |||
| timeSetup | 1.3.6.1.4.1.6321.1.2.3.3.11.4 | |||
| dayLightSaving | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7 | |||
| INT dayLightSavingAdminStatus | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.1 | INTEGER | read-write | |
| dayLightSavingStartTime | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2 | |||
| INT dayLightSavingStartMonth | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.1 | INTEGER | read-write | |
| INT dayLightSavingStartWeek | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.2 | INTEGER | read-write | |
| INT dayLightSavingStartWday | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.3 | INTEGER | read-write | |
| INT dayLightSavingStartHour | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.4 | INTEGER | read-write | 1h 01h00, 2h 02h00 3h 03h00 4h 04h00 5h 05h00 6h 06h00 7h 07h00 8h 08h00 9h 09h00 10h 10h00 11h 11h00 12h 12h00 13h 13h00 14h 14h00 15h 15h00 16h 16h00 17h 17h00 18h 18h00 19h 19h00 20h 20h00 21h 21h00 22h 22h00 23h 23h00 |
| dayLightSavingEndTime | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3 | |||
| INT dayLightSavingEndMonth | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.1 | INTEGER | read-write | |
| INT dayLightSavingEndWeek | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.2 | INTEGER | read-write | |
| INT dayLightSavingEndWday | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.3 | INTEGER | read-write | |
| INT dayLightSavingEndHour | 1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.4 | INTEGER | read-write | 1h 01h00, 2h 02h00 3h 03h00 4h 04h00 5h 05h00 6h 06h00 7h 07h00 8h 08h00 9h 09h00 10h 10h00 11h 11h00 12h 12h00 13h 13h00 14h 14h00 15h 15h00 16h 16h00 17h 17h00 18h 18h00 19h 19h00 20h 20h00 21h 21h00 22h 22h00 23h 23h00 |
| accessCtrl | 1.3.6.1.4.1.6321.1.2.3.3.11.5 | |||
| securedClientTable | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2 | not-accessible | A table that contains information about secured clients. | |
| securedClientEntry | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1 | not-accessible | A list of secured client entry. | |
| INT securedClientIndex | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.1 | INTEGER | read-only | The index of the entry. |
| IP securedClientStartIp | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.2 | IpAddress | read-write | The starting IP address of the secured client set. |
| IP securedClientEndIp | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.3 | IpAddress | read-write | The ending IP address of the secured client set. |
| INT securedClientService | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.4 | INTEGER | read-write | Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions areh BIT 1h telnet BIT 2h ftp BIT 3h web BIT 4h icmp BIT 5h not support BIT 6h snmp. |
| INT securedClientEnable | 1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.5 | INTEGER | read-write | Enable/disable the entry. |
| extAlarm | 1.3.6.1.4.1.6321.1.2.3.3.11.8 | |||
| extAlarmTable | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1 | not-accessible | A table that contains external alarm information. | |
| extAlarmEntry | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1 | not-accessible | The entry of external alarm table. | |
| INT extAlarmIndex | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.1 | INTEGER | read-only | The index of the entry. |
| STR extAlarmName | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.2 | DisplayString | read-write | The external alarm name. |
| STR extAlarmStatus | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.3 | DisplayString | read-only | Display 'Normal' or 'Alarm' string |
| INT extAlarmTriggeredMode | 1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.4 | INTEGER | read-write | The external alarm triggered mode. |
| user | 1.3.6.1.4.1.6321.1.2.3.3.11.9 | |||
| INT userAuthMode | 1.3.6.1.4.1.6321.1.2.3.3.11.9.1 | INTEGER | read-write | User authentication procsssing mode. |
| IP userAuthServerIp | 1.3.6.1.4.1.6321.1.2.3.3.11.9.2 | IpAddress | read-write | The IP address of the authentication server. |
| INT userAuthServerPort | 1.3.6.1.4.1.6321.1.2.3.3.11.9.3 | INTEGER | read-write | The port of the authentication server. |
| OCT userAuthServerSecret | 1.3.6.1.4.1.6321.1.2.3.3.11.9.4 | OCTET STRING | read-write | The secret between the authentication server and the NE for authentication process. |
| userTable | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5 | not-accessible | A table that contains user information. | |
| userEntry | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1 | not-accessible | An entry of userTable. | |
| STR userName | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.1 | DisplayString | read-only | The user name. |
| STR userPassword | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.2 | DisplayString | read-create | The user password. |
| INT userPriviledge | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.3 | INTEGER | read-create | The user priviledge to decide what operation the user can and cannot do. |
| ROW userRowStatus | 1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.4 | RowStatus | read-create | The row status used to create or delete a user. |
| INT userAuthDefaultPriviledge | 1.3.6.1.4.1.6321.1.2.3.3.11.9.6 | INTEGER | read-write | The user default priviledge to be assigned when radius authentication succeeds but no user priviledge information(radius service-type) is provided. |
| usbCastCtrl | 1.3.6.1.4.1.6321.1.2.3.3.11.10 | |||
| INT usBcastCtrlEnable | 1.3.6.1.4.1.6321.1.2.3.3.11.10.1 | INTEGER | read-write | Enable/disable upstream broadcast control. |
| INT usBcastCtrlRate | 1.3.6.1.4.1.6321.1.2.3.3.11.10.2 | INTEGER | read-write | |
| dsQos | 1.3.6.1.4.1.6321.1.2.3.3.11.11 | |||
| INT dsQosEnableMode | 1.3.6.1.4.1.6321.1.2.3.3.11.11.1 | INTEGER | read-write | Enable internal overriding mode to VLAN, DSCP or IP Precedence, or disable the overriding mode. |
| INT dsQosDefaultPri | 1.3.6.1.4.1.6321.1.2.3.3.11.11.2 | INTEGER | read-write | Set the internal default p.bit after overiding. All values not configured in the overriding table are assigned to the default p.bit |
| dsQoSOverridingTable | 1.3.6.1.4.1.6321.1.2.3.3.11.11.3 | not-accessible | This table includes downstream QoS overriding information. | |
| dsQoSOverridingEntry | 1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1 | not-accessible | An entry in dsQoSOverridingTable. | |
| INT dsQosPriority | 1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1.1 | INTEGER | read-only | Internal P.bit after overriding. |
| STR dsQosValueList | 1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1.2 | DisplayString | read-write | VLAN ID, DSCP, or IP Precedence based on the internal overriding mode configured. VLAN ID 1 ~ 4094, DSCP 0 ~ 63, IP Precedence 0 ~ 7. value_list exampleh , , . |
| INT stdioTimeout | 1.3.6.1.4.1.6321.1.2.3.3.11.12 | INTEGER | read-write | Set the stdio timeout, 0~300 minutes. |
| INT isConfigChanged | 1.3.6.1.4.1.6321.1.2.3.3.11.13 | INTEGER | read-only | If system configuration has been changed. |
| fwUpgrade | 1.3.6.1.4.1.6321.1.2.3.3.11.14 | |||
| OCT fwUpgradeVersion | 1.3.6.1.4.1.6321.1.2.3.3.11.14.1 | OCTET STRING | read-write | Configure the target firmware version that will be upgraded. |
| INT fwUpgradeCheck | 1.3.6.1.4.1.6321.1.2.3.3.11.14.2 | INTEGER | read-write | Enable/disable firmware upgrade version checking feature. |
| STR fwUpgradeStatus | 1.3.6.1.4.1.6321.1.2.3.3.11.14.3 | DisplayString | read-only | Display current firmware upgrade status. |
| delayedReboot | 1.3.6.1.4.1.6321.1.2.3.3.11.15 | |||
| INT delayedRebootTimer | 1.3.6.1.4.1.6321.1.2.3.3.11.15.1 | INTEGER | read-write | 5~1800 secs, 0h reboot immediately. |
| INT delayedRebootRemainingTime | 1.3.6.1.4.1.6321.1.2.3.3.11.15.2 | INTEGER | read-only | Display the remaining time of scheduled reboot. |
| INT delayedRebootCancel | 1.3.6.1.4.1.6321.1.2.3.3.11.15.3 | INTEGER | read-write | cancel the scheduled reboot. |
| trap | 1.3.6.1.4.1.6321.1.2.3.3.12 | |||
| statistics | 1.3.6.1.4.1.6321.1.2.3.3.13 | |||
| C32 igmpQueryCntTotal | 1.3.6.1.4.1.6321.1.2.3.3.13.1 | Counter32 | read-only | The total number of IGMP query messages received. |
| C32 igmpReportCntTotal | 1.3.6.1.4.1.6321.1.2.3.3.13.2 | Counter32 | read-only | The total number of IGMP report messages received. |
| C32 igmpLeaveCntTotal | 1.3.6.1.4.1.6321.1.2.3.3.13.3 | Counter32 | read-only | The total number of IGMP leave messages received. |
| INT igmpNumOfActiveGroups | 1.3.6.1.4.1.6321.1.2.3.3.13.4 | INTEGER | read-only | The total number of IGMP learned groups. |
| igmpGroupTable | 1.3.6.1.4.1.6321.1.2.3.3.13.5 | not-accessible | This table includes igmp group information. | |
| igmpGroupEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1 | not-accessible | An entry in igmpGroupTable. | |
| IP igmpGroupIp | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1.1 | IpAddress | read-only | igmp group IP |
| INT igmpGroupvid | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1.2 | INTEGER | read-only | vlan id |
| INT igmpGroupnumberOfMembers | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1.3 | INTEGER | read-only | number Of Members |
| POR igmpGroupMemberPorts | 1.3.6.1.4.1.6321.1.2.3.3.13.5.1.4 | PortList | read-only | Group Member Ports |
| igmpGroupPortTable | 1.3.6.1.4.1.6321.1.2.3.3.13.6 | not-accessible | This table includes igmp Group port information. | |
| igmpGroupPortEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.6.1 | not-accessible | An entry in igmpGroupPortTable. | |
| IP igmpGroupPortIp | 1.3.6.1.4.1.6321.1.2.3.3.13.6.1.1 | IpAddress | read-only | Igmp Group IP |
| INT igmpGroupPortvid | 1.3.6.1.4.1.6321.1.2.3.3.13.6.1.2 | INTEGER | read-only | Igmp Group vid |
| igmpGroupV2Table | 1.3.6.1.4.1.6321.1.2.3.3.13.7 | not-accessible | A table that displays IGMP learned group member information. | |
| igmpGroupV2Entry | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1 | not-accessible | An entry of igmpGroupV2Table. | |
| VLA igmpGroupV2Vid | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1.1 | VlanIndex | read-only | The IGMP group VLAN ID. |
| IP igmpGroupV2Ip | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1.2 | IpAddress | read-only | The multicast IP address. |
| INT igmpGroupV2NumOfMembers | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1.3 | INTEGER | read-only | The number of member ports in the group. |
| POR igmpGroupV2MemberPorts | 1.3.6.1.4.1.6321.1.2.3.3.13.7.1.4 | PortList | read-only | The member port list of the group. |
| igmpGroupPortV2Table | 1.3.6.1.4.1.6321.1.2.3.3.13.8 | not-accessible | A table that displays IGMP joined groups in this port. | |
| igmpGroupPortV2Entry | 1.3.6.1.4.1.6321.1.2.3.3.13.8.1 | not-accessible | An entry of igmpGroupPortV2Table. | |
| VLA igmpGroupPortV2Vid | 1.3.6.1.4.1.6321.1.2.3.3.13.8.1.1 | VlanIndex | read-only | The IGMP group VLAN ID. |
| IP igmpGroupPortV2Ip | 1.3.6.1.4.1.6321.1.2.3.3.13.8.1.2 | IpAddress | read-only | The multicast IP address. |
| IP igmpGroupPortV2SourceIp | 1.3.6.1.4.1.6321.1.2.3.3.13.8.1.3 | IpAddress | read-only | The source IP address that joins the IGMP group. |
| igmpPortCtrlPduTable | 1.3.6.1.4.1.6321.1.2.3.3.13.9 | not-accessible | A table that displays IGMP related counter values in this port. | |
| igmpPortCtrlPduEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1 | not-accessible | An entry of igmpPortCtrlPduTable. | |
| C32 igmpPortCtrlPduQueryCnt | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.1 | Counter32 | read-only | The total number of IGMP query messages received in this port. |
| C32 igmpPortCtrlPduReportCnt | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.2 | Counter32 | read-only | The total number of IGMP report messages received in this port. |
| C32 igmpPortCtrlPduLeaveCnt | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.3 | Counter32 | read-only | The total number of IGMP leave messages received in this port. |
| INT igmpPortNumOfActiveGroups | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.4 | INTEGER | read-only | The total number of active IGMP groups in this port. |
| C32 igmpPortCtrlAuditLeaveCnt | 1.3.6.1.4.1.6321.1.2.3.3.13.9.1.5 | Counter32 | read-only | The total number of groups left by audit query. |
| dhcpStats | 1.3.6.1.4.1.6321.1.2.3.3.13.11 | |||
| dhcpSnoopIpTable | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1 | not-accessible | This table shows the IP addresses and netmasks offered by the DHCP server. | |
| dhcpSnoopIpEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1 | not-accessible | An entry of dhcpSnoopIpTable. | |
| IP dhcpSnoopIp | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.1 | IpAddress | read-only | The snooped IP address. |
| PHY dhcpSnoopMac | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.2 | PhysAddress | read-only | The snooped MAC address. |
| VLA dhcpSnoopVid | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.3 | VlanIndex | read-only | The snooped VLAN ID. |
| INT dhcpSnoopMask | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.4 | INTEGER | read-only | The snooped IP mask |
| IP dhcpSnoopGateway | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.5 | IpAddress | read-only | The snooped Gateway. |
| OCT dhcpSnoopRouteMap | 1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.6 | OCTET STRING | read-only | The refrence bit map of the dhcp route |
| dhcpSnoopCounterTable | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2 | not-accessible | This table shows the DHCP statistics. | |
| dhcpSnoopCounterEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1 | not-accessible | An entry of dhcpSnoopCounterTable. | |
| C64 dhcpDiscovery | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.1 | Counter64 | read-only | The total number of received DHCP server discovery packets. |
| C64 dhcpOffer | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.2 | Counter64 | read-only | The total number of received DHCP server offer packets. |
| C64 dhcpRequest | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.3 | Counter64 | read-only | The total number of received DHCP IP request packets. |
| C64 dhcpAck | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.4 | Counter64 | read-only | The total number of received DHCP IP acknowledge packets. |
| C64 dhcpAckBySnoopFull | 1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.5 | Counter64 | read-only | The total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full. |
| dhcpRouteTable | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3 | not-accessible | A table that contains dhcp route information. | |
| dhcpRouteEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1 | not-accessible | An entry of dhcpRouteTable. | |
| INT dhcpRouteIndex | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.1 | INTEGER | read-only | |
| VLA dhcpRouteVid | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.2 | VlanIndex | read-only | The VLAN-ID refering to this dhcp route. |
| IP dhcpRouteIP | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.3 | IpAddress | read-only | IP of this dhcp route |
| INT dhcpRouteMask | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.4 | INTEGER | read-only | The subnet mask of source IP mask. |
| IP dhcpRouteGwIP | 1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.5 | IpAddress | read-only | The gateway IP address. |
| paepvcStats | 1.3.6.1.4.1.6321.1.2.3.3.13.12 | |||
| paepvcSessionTable | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1 | not-accessible | This table shows the paepvc session statistics. | |
| paepvcSessionEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1 | not-accessible | An entry of paepvcSessionTable. | |
| INT paepvcSessionVpi | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.1 | INTEGER | read-only | The PAEPVC VPI. |
| INT paepvcSessionVci | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.2 | INTEGER | read-only | The PAEPVC VCI. |
| INT paepvcSessionState | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.3 | INTEGER | read-only | The PAEPVC status. |
| INT paepvcSessionId | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.4 | INTEGER | read-only | The PAEPVC session ID. |
| U32 paepvcSessionUptime | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.5 | Unsigned32 | read-only | The PAEPVC session uptime. |
| STR paepvcSessionacname | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.6 | DisplayString | read-only | Access concentrator name. |
| STR paepvcSessionsrvcname | 1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.7 | DisplayString | read-only | Service name. |
| paepvcCountTable | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2 | not-accessible | This table shows the paepvc counters. | |
| paepvcCountEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1 | not-accessible | An entry of paepvcCountTable. | |
| INT paepvcCountVpi | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.1 | INTEGER | read-only | The PAEPVC VPI. |
| INT paepvcCountVci | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.2 | INTEGER | read-only | The PAEPVC VCI. |
| U32 paepvcCountPppLcpCfgReqRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.3 | Unsigned32 | read-only | The number of ppp lcp config-request received. |
| U32 paepvcCountPppLcpEchoReqRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.4 | Unsigned32 | read-only | The number of ppp lcp echo-request received. |
| U32 paepvcCountPppLcpEchoReplyRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.5 | Unsigned32 | read-only | The number of ppp lcp echo-reply received. |
| U32 paepvcCountPadiTx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.6 | Unsigned32 | read-only | The number of pppoe padi transfered |
| U32 paepvcCountPadoRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.7 | Unsigned32 | read-only | The number of pppoe pado received |
| U32 paepvcCountPadrTx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.8 | Unsigned32 | read-only | The number of pppoe padr transfered |
| U32 paepvcCountPadsRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.9 | Unsigned32 | read-only | The number of pppoe pads received |
| U32 paepvcCountPadtTx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.10 | Unsigned32 | read-only | The number of pppoe padt transfered |
| U32 paepvcCountPadtRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.11 | Unsigned32 | read-only | The number of pppoe padt received |
| U32 paepvcCountSrvcnameErrRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.12 | Unsigned32 | read-only | The number of pppoe service name error received |
| U32 paepvcCountAcSystemErrRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.13 | Unsigned32 | read-only | The number of pppoe access concentrator name error received |
| U32 paepvcCountGenericErrTx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.14 | Unsigned32 | read-only | The number of pppoe generic error transfered |
| U32 paepvcCountGenericErrRx | 1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.15 | Unsigned32 | read-only | The number of pppoe generic error received |
| macStats | 1.3.6.1.4.1.6321.1.2.3.3.13.13 | |||
| INT macDisplayTarget | 1.3.6.1.4.1.6321.1.2.3.3.13.13.1 | INTEGER | read-write | This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could beh 99h all ports in the system 98h all subscriber ports 97h all Ethernet ports IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50). |
| macTable | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2 | not-accessible | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | |
| macEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1 | not-accessible | An entry of macTable. | |
| MAC macAddress | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.1 | MacAddress | read-only | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| INT macPort | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.2 | INTEGER | read-only | The port from which the mac address has been learned. |
| INT macStatus | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.3 | INTEGER | read-only | The status of this entry. |
| VLA macVid | 1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.4 | VlanIndex | read-only | The vlan id of this entry. |
| n1macStats | 1.3.6.1.4.1.6321.1.2.3.3.13.15 | |||
| n1macTable | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1 | not-accessible | A table that contains information about N to 1 MAC translation, including connection type, session id/IP and MAC address. | |
| n1macEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1 | not-accessible | An entry of n1macTable. | |
| U32 n1macProtoVal | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.1 | Unsigned32 | read-only | The protocol value of specified connection. If the connection is pppoe/pppoaoe, the value stands for session id; if the connection is ipoe/ipoaoe, the value means IP address. |
| INT n1macProtoType | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.2 | INTEGER | read-only | Protocol type of the connection which the MAC is translated. |
| MAC n1macMacAddr | 1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.3 | MacAddress | read-only | The translated MAC address. |
| enetStats | 1.3.6.1.4.1.6321.1.2.3.3.13.16 | |||
| INT enetPrimaryPort | 1.3.6.1.4.1.6321.1.2.3.3.13.16.1 | INTEGER | read-only | IfIndex is used for identifying the Primary Ethernet Port when dot3ad is disabled. |
| enetSfpInfoTable | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2 | not-accessible | This table includes sfp info of enet port. | |
| enetSfpInfoEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1 | not-accessible | An entry in enetSfpInfoTable. | |
| INT enetSfpInfoTxpower | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.1 | INTEGER | read-only | Measured Tx Output Power. |
| INT enetSfpInfoRxpower | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.2 | INTEGER | read-only | Measured Rx Output Power. |
| INT enetSfpInfoTemperature | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.3 | INTEGER | read-only | Measured temperature. |
| INT enetSfpInfoTxBias | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.4 | INTEGER | read-only | Measured tx bias. |
| INT enetSfpInfoVoltage | 1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.5 | INTEGER | read-only | Measured voltage. |
| vdslStats | 1.3.6.1.4.1.6321.1.2.3.3.13.17 | |||
| vdslLineStatsTable | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2 | not-accessible | The table displays VDSL line statistics. | |
| vdslLineStatsEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1 | not-accessible | An entry of vdslLineStatsTable. | |
| OCT vdslLineStatsVtucBits1 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.1 | OCTET STRING | read-only | The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. |
| OCT vdslLineStatsVtucBits2 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.2 | OCTET STRING | read-only | The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. |
| OCT vdslLineStatsVtucBits3 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.3 | OCTET STRING | read-only | The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. |
| OCT vdslLineStatsVtucBits4 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.4 | OCTET STRING | read-only | The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. |
| OCT vdslLineStatsVturBits1 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.5 | OCTET STRING | read-only | The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. |
| OCT vdslLineStatsVturBits2 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.6 | OCTET STRING | read-only | The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. |
| OCT vdslLineStatsVturBits3 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.7 | OCTET STRING | read-only | The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. |
| OCT vdslLineStatsVturBits4 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.8 | OCTET STRING | read-only | The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15. |
| OCT vdslLineStatsVtucGain1 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.9 | OCTET STRING | read-only | The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVtucGain2 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.10 | OCTET STRING | read-only | The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVtucGain3 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.11 | OCTET STRING | read-only | The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVtucGain4 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.12 | OCTET STRING | read-only | The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVtucGain5 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.13 | OCTET STRING | read-only | The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVtucGain6 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.14 | OCTET STRING | read-only | The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVtucGain7 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.15 | OCTET STRING | read-only | The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVtucGain8 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.16 | OCTET STRING | read-only | The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVturGain1 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.17 | OCTET STRING | read-only | The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVturGain2 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.18 | OCTET STRING | read-only | The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVturGain3 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.19 | OCTET STRING | read-only | The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVturGain4 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.20 | OCTET STRING | read-only | The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVturGain5 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.21 | OCTET STRING | read-only | The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVturGain6 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.22 | OCTET STRING | read-only | The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVturGain7 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.23 | OCTET STRING | read-only | The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVturGain8 | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.24 | OCTET STRING | read-only | The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale. |
| OCT vdslLineStatsVtucHlog | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.25 | OCTET STRING | read-only | The object provides Hlog for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the sub-carrier group becauseit is out of the passband or that the attenuation is out of range to be represented. Each value in this array is 16 bits wide. |
| OCT vdslLineStatsVturHlog | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.26 | OCTET STRING | read-only | The object provides Hlog for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the sub-carrier group because it is out of the passband or that the attenuation is out ofrange to be represented. Each value in this array is 16 bits wide. |
| OCT vdslLineStatsVtucQln | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.27 | OCTET STRING | read-only | The object provides Qln for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the sub-carrier group. Each value in this array is 8 bits wide. |
| OCT vdslLineStatsVturQln | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.28 | OCTET STRING | read-only | The object provides Qln for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the sub-carrier group. Each value in this array is 8 bits wide. |
| OCT vdslLineStatsVtucSnr | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.29 | OCTET STRING | read-only | The object provides Snr for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVtucSnr (i)/2) in dB (i.e., -32 to 95dB). Each value in this array is 8 bits wide. |
| OCT vdslLineStatsVturSnr | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.30 | OCTET STRING | read-only | The object provides Snr for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVturSnr (i)/2) in dB (i.e., -32 to 95dB). Each value in this array is 8 bits wide. |
| OCT vdslLineStatsVtucTssi | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.31 | OCTET STRING | read-only | The object provides Tssi for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi value is represented as a multiple of 1/32768 on linear scale. |
| OCT vdslLineStatsVturTssi | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.32 | OCTET STRING | read-only | The object provides Tssi for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi value is represented as a multiple of 1/32768 on linear scale. |
| INT vdslLineStatsProtocol | 1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.33 | INTEGER | read-only | The actual line protocol. |
| macffStats | 1.3.6.1.4.1.6321.1.2.3.3.13.19 | |||
| macFfStatsTable | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1 | not-accessible | A table that contains MAC Force Forwarding static configuration and dynamic information. | |
| macFfStatsEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1 | not-accessible | An entry of macFfStatsTable. | |
| INT macFfStatsIndex | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.1 | INTEGER | read-only | Index of the MACFF. |
| VLA macFfStatsVid | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.2 | VlanIndex | read-only | The VLAN-ID refering to this AR/AS. |
| IP macFfStatsArIP | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.3 | IpAddress | read-only | IP of this AR/AS |
| IP macFfStatsSrcIP | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.4 | IpAddress | read-only | The source IP address of the MACFF. |
| INT macFfStatsSrcMask | 1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.5 | INTEGER | read-only | The subnet mask of source IP mask. |
| macFfArpTable | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2 | not-accessible | A table that contains MAC Force Forwarding ARP information. | |
| macFfArpEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1 | not-accessible | An entry of macFfArpTable. | |
| VLA macFfArpVid | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.1 | VlanIndex | read-only | The VLAN-ID refering to this AR/AS. |
| IP macFfArpIP | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.2 | IpAddress | read-only | IP of this AR/AS. |
| INT macFfArpPort | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.3 | INTEGER | read-only | Port of this AR/AS. |
| PHY macFfArpMac | 1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.4 | PhysAddress | read-only | MAC address of the AR or AS. |
| macFfArpCounterTable | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3 | not-accessible | A table that contains MAC Force Forwarding ARP counter information. | |
| macFfArpCounterEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1 | not-accessible | An entry of macFfArpCounterTable. | |
| C32 macFfArpCounterRequestTX | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.1 | Counter32 | read-only | ARP Request TX counter. |
| C32 macFfArpCounterRequestRX | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.2 | Counter32 | read-only | ARP Request RX counter. |
| C32 macFfArpCounterRequestRXDrop | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.3 | Counter32 | read-only | ARP Request RX drop counter. |
| C32 macFfArpCounterReplyTX | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.4 | Counter32 | read-only | ARP Reply TX counter. |
| C32 macFfArpCounterReplyRX | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.5 | Counter32 | read-only | ARP Reply RX counter. |
| C32 macFfArpCounterReplyRXDrop | 1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.6 | Counter32 | read-only | ARP Reply RX drop counter. |
| adslStats | 1.3.6.1.4.1.6321.1.2.3.3.13.20 | |||
| adslPortUtilTable | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1 | not-accessible | This table includes adsl port utilization. | |
| adslPortUtilEntry | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1 | not-accessible | An entry in adslPortUtilEntry. | |
| INT adslPortUtilTx | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.1 | INTEGER | read-only | Measure adsl port's tx utilization. |
| INT adslPortUtilRx | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.2 | INTEGER | read-only | Measure adsl port's rx utilization. |
| STR adslStatsXturInp | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.3 | DisplayString | read-only | XTUR minimum INP value. |
| STR adslStatsXtucInp | 1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.4 | DisplayString | read-only | XTUC minimum INP valu. |
| clear | 1.3.6.1.4.1.6321.1.2.3.3.14 | |||
| OCT counterClearTarget | 1.3.6.1.4.1.6321.1.2.3.3.14.1 | OCTET STRING | read-write | This managed object is used for identify the target on which the counter would be cleared. The target is encoded ash Byte 1h reserved Byte 2~3h reserved Byte 4h reserved Byte 5~11heach octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| INT counterClearOps | 1.3.6.1.4.1.6321.1.2.3.3.14.2 | INTEGER | read-write | The corresponding bit is set to 1 to start the operation. The various bit positions areh BIT 1h clear interface counters BIT 2h clear pvc packet counters BIT 3h not support BIT 4h not support BIT 5h clear DHCP counters BIT 6h clear IGMP counters BIT 7h clear IGMP port counters |
| INT counterClearVpi | 1.3.6.1.4.1.6321.1.2.3.3.14.3 | INTEGER | read-write | VPI of the pvc whose counters would be cleared. |
| INT counterClearVci | 1.3.6.1.4.1.6321.1.2.3.3.14.4 | INTEGER | read-write | VCI of the pvc whose counters would be cleared. |
| aesSeriesCommon | 1.3.6.1.4.1.6321.1.2.3.3.97 | |||
| iesSeriesCommon | 1.3.6.1.4.1.6321.1.2.3.3.98 | |||
| accessSwitchCommonATM | 1.3.6.1.4.1.6321.1.2.3.3.99 |
FAQ
What kind of status does E5-120-MIB provide for a Calix broadband access node?
It covers the core management OID hierarchy for the Calix E5-120 multi-service access platform, exposing system-level configuration and general status monitoring objects, plus a macffStats table with per-interface or per-function traffic/error counters from the internal access/aggregation function.
How would a broadband provider use this MIB for fault diagnosis?
A service provider running E5-120 access nodes in a central office would poll macffStats alongside system configuration and platform/chassis status to catch traffic errors or aggregation-function problems, typically alongside standard IF-MIB and Calix's other service-specific (DSL, GPON, Ethernet) MIBs for the same box.
RFC description
Huawei E5-120 mobile gateway management objects for wireless broadband devices.
Start monitoring Calix E5 multi-service access platform (E5-120) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.