E5-121-TRAPS-MIB

All MIBs › E5-121-TRAPS-MIB

Category: Alarm and Event Management, Domain: DSL/xPON, Vendor: Calix

Description: Trap definitions for the Calix E5-121 access platform providing fault and event notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is E5-121-TRAPS-MIB?

E5-121-TRAPS-MIB defines the fault and event notification structures for the Calix E5-121 broadband access platform, a carrier access/aggregation device. It exposes an alarm table capturing the object class and instance identifiers responsible for each alarm along with an alarm type, mirroring the trap structure used on the sibling E5-111 platform. This is a faults/traps MIB directly supporting monitoring of hardware and software fault conditions on the device: each alarm entry identifies which managed object (e.g., a card, port, or service, via object class/instance) triggered the event, and of what type. It depends on the broader Calix E5-series MIB structure for the definitions of the objects referenced by class/instance, plus standard SNMP notification conventions. It is typically deployed in carrier/service-provider access networks to feed device fault events into an NMS for real-time alarm correlation. Network engineers evaluating or troubleshooting this functionality can download the E5-121-TRAPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in E5-121-TRAPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Calix E5-121 access platform

Monitoring Examples

e5AlarmTable/e5AlarmEntry record e5AlarmObjectClass and up to eight instance identifiers (e5AlarmObjectInstance1 through e5AlarmObjectInstance8) pinpointing exactly which managed resource raised a condition, together with e5AlarmType classifying the fault. An NMS would subscribe to these traps to be alerted immediately when a fault occurs on the E5-121, then use the object class/instance fields to drill into the specific affected hardware component. This lets operators correlate incoming SNMP traps directly to physical resources without polling every object individually.

What Can Be Monitored

alarm/fault events
alarm object class
alarm object instance identifiers
alarm type classification

Imported Objects

From E5-121-IESCOMMON-MIB

iesChassisId	OBJECT-TYPE
iesSlotId	OBJECT-TYPE

From E5-121-MIB

e5x121

OBJECT-IDENTITY

From IEEE8021-CFM-MIB

dot1agCfmMdMdLevel	OBJECT-TYPE
dot1agCfmMepIdentifier	OBJECT-TYPE
dot1agCfmVlanPrimaryVid	OBJECT-TYPE

From RFC1213-MIB

DisplayString
ifIndex

From SNMPv2-SMI

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
trap	1.3.6.1.4.1.6321.1.2.3.4.12
object	1.3.6.1.4.1.6321.1.2.3.4.12.1
INT eqptAlarmInputIndex	1.3.6.1.4.1.6321.1.2.3.4.12.1.2	INTEGER	read-only	The index of alarm input.
STR eqptAlarmInputName	1.3.6.1.4.1.6321.1.2.3.4.12.1.8	DisplayString	read-only	The Name of alarm input.
INT sysMacAntiSpoofOrig	1.3.6.1.4.1.6321.1.2.3.4.12.1.9	INTEGER	read-only	The Original port of Mac-AntiSpoofing.
INT sysMacAntiSpoofNew	1.3.6.1.4.1.6321.1.2.3.4.12.1.10	INTEGER	read-only	The New port of Mac-AntiSpoofing.
STR sysMacAntiSpoofMAC	1.3.6.1.4.1.6321.1.2.3.4.12.1.11	DisplayString	read-only	The MAC of Mac-AntiSpoofing.
INT sysAlarmOrigSeverity	1.3.6.1.4.1.6321.1.2.3.4.12.1.12	INTEGER	read-only	The original severity of alarm.
INT sysAlarmNewSeverity	1.3.6.1.4.1.6321.1.2.3.4.12.1.13	INTEGER	read-only	The new severity of alarm.
INT sysAlarmConfId	1.3.6.1.4.1.6321.1.2.3.4.12.1.14	INTEGER	read-only	The changed severity of alarm condition ID. 5000:vdslLine_up 5001:vdslLine_down 5002:vdsl_tca_lol 5003:vdsl_tca_lof 5004:vdsl_tca_los 5005:vdsl_tca_lop 5006:vdsl_tca_es 5007:vdsl_tca_ses 5008:vdsl_tca_uas 5009:xd_xtuc_loftrap 5010:xd_xtuc_lostrap 5011:xd_xtur_loftrap 5012:xd_xtur_lostrap 5013:xd_xtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:voip_battery_fail 10009:voip_clock_fail 10010:voip_ringer_fault 10011:eqptAlm_input2 10012:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 15006:sysHost_terminate 20000:enetUp 20001:enetDown 25000:voip_temp_error 25001:voip_dc_power_fail 25002:voip_ac_power_fail 25003:voip_ring_timer_fail 25004:voip_ring_rsrce_fail 25006:voip_dhcp_clt_fail 25007:voip_call_setup_failed 25008:voip_call_threshold_violate 30000:cfmError
INT voipDevId	1.3.6.1.4.1.6321.1.2.3.4.12.1.51	INTEGER	read-only	The device ID of the DUT. 0 means port 1 to 24.
INT voipCount	1.3.6.1.4.1.6321.1.2.3.4.12.1.52	INTEGER	read-only	The number of ringer fault
INT voipPhoneState	1.3.6.1.4.1.6321.1.2.3.4.12.1.53	INTEGER	read-only	Phone status of the line.
INT voipBatType	1.3.6.1.4.1.6321.1.2.3.4.12.1.54	INTEGER	read-only	The number of ringer fault
INT intfCfmCcmErrorCause	1.3.6.1.4.1.6321.1.2.3.4.12.1.55	INTEGER	read-only
equipment	1.3.6.1.4.1.6321.1.2.3.4.12.3
NTF eqptHWMonitorFailure	1.3.6.1.4.1.6321.1.2.3.4.12.3.1			Hardware monitor diagnosis is failed.
systrap	1.3.6.1.4.1.6321.1.2.3.4.12.4
NTF sysMacAntiSpoofing	1.3.6.1.4.1.6321.1.2.3.4.12.4.1			MAC Anti-spoofing.
NTF sysAlarmCutoffEnable	1.3.6.1.4.1.6321.1.2.3.4.12.4.2			Alarm cutoff is activated.
NTF sysAlarmClearEnable	1.3.6.1.4.1.6321.1.2.3.4.12.4.3			Alarm clear is activated.
NTF sysLoginFailure	1.3.6.1.4.1.6321.1.2.3.4.12.4.4			User login is failed.
NTF sysAlarmSvrtyChange	1.3.6.1.4.1.6321.1.2.3.4.12.4.5			Alarm severity is changed.
voiptrap	1.3.6.1.4.1.6321.1.2.3.4.12.7
NTF voipBatteryFail	1.3.6.1.4.1.6321.1.2.3.4.12.7.1			Battery fault trigger.
NTF voipBatteryClear	1.3.6.1.4.1.6321.1.2.3.4.12.7.2			Battery fault release.
NTF voipClockFail	1.3.6.1.4.1.6321.1.2.3.4.12.7.3			Clock fault trigger.
NTF voipClockClear	1.3.6.1.4.1.6321.1.2.3.4.12.7.4			Clock fault release.
NTF voipRingerFault	1.3.6.1.4.1.6321.1.2.3.4.12.7.5			Ringer fault trigger.
NTF voipRingerClear	1.3.6.1.4.1.6321.1.2.3.4.12.7.6			Ringer fault release.
NTF voipTempError	1.3.6.1.4.1.6321.1.2.3.4.12.7.7			Temperature error trigger.
NTF voipTempClear	1.3.6.1.4.1.6321.1.2.3.4.12.7.8			Temperature error release.
NTF voipDcPowerFail	1.3.6.1.4.1.6321.1.2.3.4.12.7.9			DC power error trigger.
NTF voipDcPowerClear	1.3.6.1.4.1.6321.1.2.3.4.12.7.10			DC power error release.
NTF voipAcPowerFail	1.3.6.1.4.1.6321.1.2.3.4.12.7.11			DC power error trigger.
NTF voipAcPowerClear	1.3.6.1.4.1.6321.1.2.3.4.12.7.12			DC power error release.
interface	1.3.6.1.4.1.6321.1.2.3.4.12.8
NTF cfmCcmError	1.3.6.1.4.1.6321.1.2.3.4.12.8.1
e5Alarm	1.3.6.1.4.1.6321.1.2.3.4.12.9
e5AlarmTable	1.3.6.1.4.1.6321.1.2.3.4.12.9.1		not-accessible	This table holds all the active alarms
e5AlarmEntry	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1		not-accessible	List of attributes regarding alarm table
INT e5AlarmObjectClass	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.1	INTEGER	read-only	Object Class for an alarm
INT e5AlarmObjectInstance1	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.2	INTEGER	read-only	Object instance for an alarm, level 1
INT e5AlarmObjectInstance2	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.3	INTEGER	read-only	Object instance for an alarm, level 2
INT e5AlarmObjectInstance3	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.4	INTEGER	read-only	Object instance for an alarm, level 3
INT e5AlarmObjectInstance4	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.5	INTEGER	read-only	Object instance for an alarm, level 4
INT e5AlarmObjectInstance5	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.6	INTEGER	read-only	Object instance for an alarm, level 5
INT e5AlarmObjectInstance6	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.7	INTEGER	read-only	Object instance for an alarm, level 6
INT e5AlarmObjectInstance7	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.8	INTEGER	read-only	Object instance for an alarm, level 7
INT e5AlarmObjectInstance8	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.9	INTEGER	read-only	Object instance for an alarm, level 8
INT e5AlarmType	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.10	INTEGER	read-only	Unique type for an alarm
INT e5AlarmSeverity	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.11	INTEGER	read-only	Severity of the alarm
OCT e5AlarmTimeStamp	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.12	OCTET STRING	read-only	Timestamp indicating the set/clear time of the alarm
INT e5AlarmServiceAffecting	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.13	INTEGER	read-only	Indicated the nature of the alarm i.e. service affecting or not
INT e5AlarmLocationInfo	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.14	INTEGER	read-only
OCT e5AlarmText	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.15	OCTET STRING	read-only	Alarm description
INT e5AlarmTime	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.16	INTEGER	read-only	UTC time
OCT e5AlarmCliObject	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.17	OCTET STRING	read-only	The short CLI name for the object class and instance
INT e5AlarmSecObjectClass	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.18	INTEGER	read-only	Secondary Object Class for an alarm
INT e5AlarmSecObjectInstance1	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.19	INTEGER	read-only	Secondary object instance for an alarm, level 1
INT e5AlarmSecObjectInstance2	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.20	INTEGER	read-only	Secondary object instance for an alarm, level 2
INT e5AlarmSecObjectInstance3	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.21	INTEGER	read-only	Secondary object instance for an alarm, level 3
INT e5AlarmSecObjectInstance4	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.22	INTEGER	read-only	Secondary object instance for an alarm, level 4
INT e5AlarmSecObjectInstance5	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.23	INTEGER	read-only	Secondary object instance for an alarm, level 5
INT e5AlarmSecObjectInstance6	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.24	INTEGER	read-only	Secondary object instance for an alarm, level 6
INT e5AlarmSecObjectInstance7	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.25	INTEGER	read-only	Secondary object instance for an alarm, level 7
INT e5AlarmSecObjectInstance8	1.3.6.1.4.1.6321.1.2.3.4.12.9.1.1.26	INTEGER	read-only	Secondary object instance for an alarm, level 8
NTF e5AlarmNotify	1.3.6.1.4.1.6321.1.2.3.4.12.9.2			E5 device alarm notification.

RFC description

E5-121 equipment and alarm management for monitoring chassis events, equipment faults, and system traps.

Start monitoring Calix E5-121 access platform (alarm/trap notifications) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download E5-121-TRAPS-MIB

What Is E5-121-TRAPS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description