Dell-Redistribute

All MIBs › Dell-Redistribute

Category: IP Routing

Description: Covers the configuration of route redistribution policies between routing protocols on Dell devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Dell-Redistribute?

Dell-Redistribute is a Dell Networking enterprise MIB, built on the same RADLAN-derived object naming as other Dell switch MIBs, for configuring route redistribution policy between routing protocols, such as redistributing static or OSPF routes into another protocol's routing domain. It exposes a redistribution table defining source and destination protocols, process IDs, route-map based match criteria, and metric type/value/AS-number settings applied during redistribution. This is configuration-focused rather than hardware-status data, but monitoring it is still valuable operationally: an administrator polls the redistribution table to confirm route-leaking policy between protocols is correctly provisioned, catching cases where an unintended source protocol is redistributing routes or a metric setting is causing routes to be preferred or de-preferred incorrectly. It is inherently dependent on the underlying routing-protocol MIBs, such as OSPF-MIB or RIP2-MIB, whose routes are being redistributed. It is deployed on Dell Networking (PowerConnect/Force10-heritage) switches and routers running multiple routing protocols that need controlled route exchange between them. Engineers can download the Dell-Redistribute file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Dell-Redistribute. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell Networking (PowerConnect/Force10-heritage) switches and routers

Monitoring Examples

An administrator would poll rlRedistTable/rlRedistEntry to check rlRedistSrcProtocol and rlRedistDstProtocol for a given entry, confirming that, for example, OSPF routes are correctly being redistributed into RIP with the intended rlRedistMetricType and rlRedistMetricValue. An unexpected rlRedistRoutMapName or rlRedistMatchType could explain why certain routes are unexpectedly appearing or missing in the destination protocol's routing table.

What Can Be Monitored

route redistribution table entries
source/destination protocol pairs
redistribution metric type/value
route-map match criteria
AS number for redistribution

Imported Objects

From Dell-IP

ipSpec

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlRedistribute	1.3.6.1.4.1.89.26.27
rlRedistTable	1.3.6.1.4.1.89.26.27.1		not-accessible	Using a routing protocol to advertise routes that are learned by some other means, such as by another routing protocol, static routes, or directly connected routes, is called redistribution. This table is used to configure under which conditions will redistribution occur and which actions (if any) should be done on redistributed route.
rlRedistEntry	1.3.6.1.4.1.89.26.27.1.1		not-accessible	.
RLR rlRedistDstProtocol	1.3.6.1.4.1.89.26.27.1.1.1	RlRedistDstProtocol	not-accessible	The protocol to which the routes are exported to
RLR rlRedistSrcProtocol	1.3.6.1.4.1.89.26.27.1.1.2	RlRedistSrcProtocol	not-accessible	The protocol from which the routes are imported from
INT rlRedistDstProcessId	1.3.6.1.4.1.89.26.27.1.1.3	INTEGER	not-accessible	Parameter semantic differs according to rlRedistDstProtocol. in OSPF this is an appropriate OSPF process ID to which routes are to be redistributed
INT rlRedistSrcProcessId	1.3.6.1.4.1.89.26.27.1.1.4	INTEGER	not-accessible	Parameter semantic differs according to rlRedistSrcProtocol. in BGP and EIGRP keyword, this is an autonomous system number, in range 1 to 65535.. in OSPF, this is an appropriate OSPF process ID from which routes are to be redistributed. 0 means no process ID
RLR rlRedistMatchType	1.3.6.1.4.1.89.26.27.1.1.5	RlRedistMatchType	not-accessible	Applicable only when rlRedistSrcProtocol is OSPF defines the criteria by which OSPF routes are redistributed into other routing domains. It can be one of the following: rlRedistMatchTypeInternal - Routes that are internal to a specific autonomous system. rlRedistMatchTypeExternalTwo - Routes that are external to the autonomous system, but are imported into OSPF as Type 2 external route. rlRedistMatchTypeExternalOne - Routes that are external to the autonomous system, but are imported into OSPF as Type 1 external route.
STR rlRedistRoutMapName	1.3.6.1.4.1.89.26.27.1.1.6	DisplayString	not-accessible	Specifies the route map that should be interrogated to filter the importation of routes from this source routing protocol to the current routing protocol. If not specified, all routes are redistributed. If this keyword is specified, but no route map tags are listed, no routes will be imported.
INT rlRedistAsNumber	1.3.6.1.4.1.89.26.27.1.1.7	INTEGER	read-write	Autonomous system number for the redistributed route. Number in range from 1 to 65535. 0 means no AS number defined
T/F rlRedistMetricTransparent	1.3.6.1.4.1.89.26.27.1.1.8	TruthValue	read-write	Redistribute routes without changing the metric
INT rlRedistMetricValue	1.3.6.1.4.1.89.26.27.1.1.9	INTEGER	read-write	When redistributing from one OSPF process to another OSPF process on the same router, the metric will be carried through from one process to the other if no metric value is specified. When redistributing other processes to an OSPF process, the default metric is 20 when no metric value is specified.
RLR rlRedistMetricType	1.3.6.1.4.1.89.26.27.1.1.10	RlRedistMetricType	read-write	Parameter semantic differs according to rlRedistSrcProtocol. In OSPF specifies the external link type associated with the default route advertised into the OSPF routing domain. It can be one of two values: 1 - Type 1 external route 2 - Type 2 external route
T/F rlRedistSubnets	1.3.6.1.4.1.89.26.27.1.1.11	TruthValue	read-write	For redistributing routes into OSPF, the scope of redistribution for the specified protocol
T/F rlRedistOnlyNSSA	1.3.6.1.4.1.89.26.27.1.1.12	TruthValue	read-write	Sets the nssa-only attribute for all routes redistributed into OSPF.
ROW rlRedistRowStatus	1.3.6.1.4.1.89.26.27.1.1.13	RowStatus	read-create	Row Status

RFC description

Manages route redistribution policy configuration between routing protocols on Dell devices.

Start monitoring Dell Networking (PowerConnect/Force10-heritage) switch/router (route redistribution) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Dell-Redistribute

What Is Dell-Redistribute?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description