DSLAM-UPC-MIB

All MIBs › DSLAM-UPC-MIB

Organization: PairGain Technologies, Inc.

Last Updated: 1999-11-08

Category: Domain: DSL

Description: Manages upstream power control (UPC) parameters for DSL subscriber line optimization on DSLAMs.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DSLAM-UPC-MIB?

DSLAM-UPC-MIB is a vendor-specific MIB for DSLAM (Digital Subscriber Line Access Multiplexer) equipment covering Upstream Power Control (UPC), a DSL feature that adjusts subscriber-line transmit power to optimize signal quality and reduce crosstalk. It exposes UPC configuration parameters per DSL line, such as power control mode and target power/attenuation settings. As a line-configuration/performance MIB it lets an administrator monitor whether UPC is enabled on a given subscriber line and verify the resulting power settings, relating to DSL line performance/quality rather than chassis hardware health. It is likely deployed alongside standard ADSL/VDSL line MIBs (such as the IETF ADSL-LINE-MIB or vendor-specific DSL MIBs) that provide the broader line status and performance counters this UPC module complements. It is typically deployed on DSLAMs in telecom central offices or cabinets, where operators tune upstream power settings to improve DSL line stability and reduce interference between adjacent lines. Engineers can download the DSLAM-UPC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DSLAM-UPC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DSLAM (Digital Subscriber Line Access Multiplexer)

Monitoring Examples

No sample objects were provided for this module. An administrator would typically poll per-line UPC mode and target-power objects to confirm upstream power control is correctly configured, and would cross-reference this with the line's actual attained upstream rate/margin from the standard DSL line MIB to diagnose crosstalk or power-related performance issues, though specific object names cannot be cited here.

What Can Be Monitored

upstream power control mode per line
target power/attenuation setting
DSL line power configuration status

Imported Objects

From ATM-MIB

atmVclVci	OBJECT-TYPE
atmVclVpi	OBJECT-TYPE
atmVplVpi	OBJECT-TYPE

From PAIRGAIN-COMMON-HD-MIB

pgainDSLAM

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Gauge
enterprises

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Counter64
MODULE-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
pgUpcMIB	1.3.6.1.4.1.927.1.9.11			The MIB Module for UPC.
pgUpcObjects	1.3.6.1.4.1.927.1.9.11.1
pgAtmUpcPortTable	1.3.6.1.4.1.927.1.9.11.1.1		not-accessible	A list of UPC entries for all interfaces.
pgAtmUpcPortEntry	1.3.6.1.4.1.927.1.9.11.1.1.1		not-accessible	An entry containing the UPC information for the ifIndex.
INT pgAtmUpcPortAdminStatus	1.3.6.1.4.1.927.1.9.11.1.1.1.1	INTEGER	read-write	The desired UPC state of the ifIndex.
pgAtmUpcVplTable	1.3.6.1.4.1.927.1.9.11.1.2		not-accessible	A list of UPC entries for all VPLs.
pgAtmUpcVplEntry	1.3.6.1.4.1.927.1.9.11.1.2.1		not-accessible	An entry containing UPC information.
INT pgAtmUpcVplAdminStatus	1.3.6.1.4.1.927.1.9.11.1.2.1.1	INTEGER	read-write	The desired UPC state of the VPL.
pgAtmUpcVclTable	1.3.6.1.4.1.927.1.9.11.1.3		not-accessible	A list of UPC entries for all VCLs.
pgAtmUpcVclEntry	1.3.6.1.4.1.927.1.9.11.1.3.1		not-accessible	An entry containing UPC information.
INT pgAtmUpcVclAdminStatus	1.3.6.1.4.1.927.1.9.11.1.3.1.1	INTEGER	read-write	The desired UPC state of the VCL.
pgAtmVplStatTable	1.3.6.1.4.1.927.1.9.11.1.4		not-accessible	This table contains all the statistics counters for each VPL. Use the table to monitor VPL incoming cell and outgoing cell usage.
pgAtmVplStatEntry	1.3.6.1.4.1.927.1.9.11.1.4.1		not-accessible	Each entry in this table represents a VPL.
C64 pgAtmVplStatTotalCellIns	1.3.6.1.4.1.927.1.9.11.1.4.1.1	Counter64	read-only	The total number of valid ATM cells received by this VPL including both CLP=0 and CLP=1 cells. The cells are counted prior to the application of the traffic policing.
C64 pgAtmVplStatClp0CellIns	1.3.6.1.4.1.927.1.9.11.1.4.1.2	Counter64	read-only	The number of valid ATM cells received by this VPL with CLP=0. The cells are counted prior to the application of the traffic policing.
C64 pgAtmVplStatTotalDiscards	1.3.6.1.4.1.927.1.9.11.1.4.1.3	Counter64	read-only	The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
C64 pgAtmVplStatClp0Discards	1.3.6.1.4.1.927.1.9.11.1.4.1.4	Counter64	read-only	The total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity.
C64 pgAtmVplStatTotalCellOuts	1.3.6.1.4.1.927.1.9.11.1.4.1.5	Counter64	read-only	The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
C64 pgAtmVplStatClp0CellOuts	1.3.6.1.4.1.927.1.9.11.1.4.1.6	Counter64	read-only	The total number of valid ATM cells transmitted with CLP=0 by this VPL.
C64 pgAtmVplStatTaggedOuts	1.3.6.1.4.1.927.1.9.11.1.4.1.7	Counter64	read-only	The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
C64 pgAtmVplStatTotalNonConforming	1.3.6.1.4.1.927.1.9.11.1.4.1.8	Counter64	read-only	For this VPL, the total number of valid ATM cells that violated the traffic service contract.
INT pgAtmVplStatClearCounters	1.3.6.1.4.1.927.1.9.11.1.4.1.9	INTEGER	write-only	For this VPL, clear the statistics counters to zero.
INT pgAtmVplStatAllClearCounters	1.3.6.1.4.1.927.1.9.11.1.5	INTEGER	read-write	For all VPLs, clear the statistics counters to zero.
pgAtmVclStatTable	1.3.6.1.4.1.927.1.9.11.1.6		not-accessible	This table contains all the statistics counters for each VCL. Use the table to monitor VCL incoming cell and outgoing cell usage.
pgAtmVclStatEntry	1.3.6.1.4.1.927.1.9.11.1.6.1		not-accessible	Each entry in this table represents a VCL.
C64 pgAtmVclStatTotalCellIns	1.3.6.1.4.1.927.1.9.11.1.6.1.1	Counter64	read-only	The total number of valid ATM cells received by this VCL including both CLP=0 and CLP=1 cells. The cells are counted prior to the application of the traffic policing.
C64 pgAtmVclStatClp0CellIns	1.3.6.1.4.1.927.1.9.11.1.6.1.2	Counter64	read-only	The number of valid ATM cells received by this VCL with CLP=0. The cells are counted prior to the application of the traffic policing.
C64 pgAtmVclStatTotalDiscards	1.3.6.1.4.1.927.1.9.11.1.6.1.3	Counter64	read-only	The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
C64 pgAtmVclStatClp0Discards	1.3.6.1.4.1.927.1.9.11.1.6.1.4	Counter64	read-only	The total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity.
C64 pgAtmVclStatTotalCellOuts	1.3.6.1.4.1.927.1.9.11.1.6.1.5	Counter64	read-only	The total number of valid ATM cells transmitted by this VCL. This includes both CLP=0 and CLP=1 cells.
C64 pgAtmVclStatClp0CellOuts	1.3.6.1.4.1.927.1.9.11.1.6.1.6	Counter64	read-only	The total number of valid ATM cells transmitted with CLP=0 by this VCL.
C64 pgAtmVclStatTaggedOuts	1.3.6.1.4.1.927.1.9.11.1.6.1.7	Counter64	read-only	The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VCL.
C64 pgAtmVclStatTotalNonConforming	1.3.6.1.4.1.927.1.9.11.1.6.1.8	Counter64	read-only	For this VCL, the total number of valid ATM cells that violated the traffic service contract.
INT pgAtmVclStatClearCounters	1.3.6.1.4.1.927.1.9.11.1.6.1.9	INTEGER	write-only	For this VCL, clear statistics counters to zero.
INT pgAtmVclStatAllClearCounters	1.3.6.1.4.1.927.1.9.11.1.7	INTEGER	read-write	For all VCLs, clear statistics counters to zero.

RFC description

PairGain DSLAM Usage Parameter Control (UPC) monitoring for ATM interfaces on DSL access multiplexers.

Start monitoring PairGain DSLAM (Upstream Power Control) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DSLAM-UPC-MIB

What Is DSLAM-UPC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description